f6c added template-exists for a save under a taken name. The template
route had no entry for it, so a duplicate save answered 503
outcome-unknown. Map it to 409 and move the SP8 pin.
Re-check finding 1 (P2): the wording for refusals that can come after the
decision is consumed told the user to look for the proposal "as answered"
in the inbox and otherwise read "nothing was applied". The bus inbox lists
no closed decision, so a consumed one drops out of it and the user would
read the false claim. Those codes now say only that part of it may already
be applied and to check the Agents page. decision-http tests assert no
"nothing was applied" in any case and no inbox pointer for those codes.
Re-check P3-b: the autonomy controls (Save, Discard, notices, review
summary and buttons) carry data-focus-key, so a focused button in a clean
form gets its focus back after the poll repaints the section.
Re-check P3-c: a failed autonomy read keeps the last read only while the
page holds the form (dirty, or focus inside it). A clean form shows the
read error. org-live-edit-browser test 4 covers both.
Re-check P3-a (harness-off after the consume through a corrupt prior
settings file) is deferred: wording it exactly needs the bus to mark the
phase on the refusal.
Review finding 1: a hire start refusal the apply step can also raise after the decision is
consumed (decision-stale, organization-instance-*, organization-refused, definition-missing,
invalid-request and the rest) no longer says "Nothing was applied". It says that part may be
applied when the inbox shows the proposal as answered, and to check Agents first. Only codes
that prepare() or the route checks alone raise keep "Nothing was applied".
Review P3: a failed workflows or autonomy read keeps the last good read, so an open editor or
a dirty form stays through it. Focus holds a section only in a field being typed in; a focused
button is rebuilt and gets focus back by data-focus-key. Autonomy has Discard changes. The
project tab fade is 0px when every tab fits.
s8 and s9 header pins at 1440 now measure from the content edge: 1418 was 100vw-based, ran
under the page scrollbar and is the P2-11 clipping itself.
Correction to the previous commit's message: P1-2 is the unknown project, agent or harness
wording; P2-4 names the refused field; P2-6 is the Queue refusal reason; P2-8 is "bus stopped".
P1-1 an open workflow editor, a dirty autonomy form and a pack's picked project keep their
node, draft and focus across the 10-second poll and an org-changed repaint.
P1-2 decision-http names the refused field and keeps the bus code and detail.
P1-3 long editors span the full width below the org page split.
P2-1 workflow roles resolve as definitions, templates and human; P2-2 a pack apply re-reads
workflows, autonomy and board and keeps its receipt; P2-3 pack preview fits its column;
P2-4 unknown project, agent or harness say so instead of outcome-unknown; P2-6 a stopped bus
reads "bus stopped"; P2-8 Queue says why it is unavailable; P2-9 pane settings values are not
clipped; P2-10 spend wording; P2-11 project header stays in its column; P2-12 project tabs
fade at the edge until scrolled to the end; P2-13 Restart bus and Stop bus line up in panes;
P2-15 backticks in chat text render as code.
Minor: Same-as commands wrap between words; harness checkboxes share a row.
Tests: org-live-edit-browser, e2e6-layout-browser, chat-replies and decision-http additions.
Jason's 2026-11-12 ruling: the only deployed system is the dev environment on
dragon-lin, so the system-type plug-in kind goes with no retired kind, fence,
conversion or new refusal code.
- plugins: system-type leaves KINDS; system-types.mjs and the five modules are
deleted. An org file naming the kind refuses unknown-kind.
- organization: the plugins.system-type check, systemTypesFence and the
system-types.console right are removed.
- bus: system-types.console, project.system-types[.set], the system-type half
of the tester check, the runtime reads and system-type-not-enabled are
removed. Step 3v-3w drops project_system_types, its index, its four guards
and its rows; SCHEMA_VERSION is 3w (32 tables, 126 triggers, 5 views).
- cli: mosaic org system-types and mosaic project system-types[-set] are
removed; stack-release COUNTED and the budget supervisor's closed list move
to 3w.
- channel: the project.system-types verbs are removed.
- webui: the System types page, route, dashboard row, chips and project
selection are removed.
- docs: REQ-SYS-1/2 now describe starter packs; README system-type text and
the requirements titles follow.
template-save.mjs captures the org (or one project) as a starter-pack JSON under
<config>/templates/<owner>/<name>.json: copy material and instance credentials
stripped, role credential request lines kept, owner/org/project/agent/root names
replaced by placeholders in free text, at most 8 hires, packs entries {id, version}.
A held credential value in kept text refuses template-secret-suspected naming the
field path. Preview then save with the preview's digest; O_EXCL 0600 write, a
second save refuses.
Bus: template.save/template.list for the owner's CLI cap, .console names for the
owner's Console cap, null in VERB_RIGHTS. CLI: mosaic org template save|list.
Console: GET /api/templates, POST /api/templates/preview, POST /api/templates.
- broker: the hire.raise answer, the inbox console preview and the trail read carry a
binding as {instance, change} only; the raise event keeps the full proposal the resolve reads.
- copy-launch status(): a copy whose role needs a service a copy cannot bind reads
copy-service-unbindable (new fixed status text) instead of a gitea binding step.
- cli instances: an unbound copy's line names its missing services.
- webui serve: the instances verb rebuilds each copy binding from the fixed status table.
- bus.js reads the binding change field only.
- browser tests: system Chromium starts with --disable-extensions; the A3 booted-bus test passes it.
The bus instances read adds a copy's binding status only when the copy was
bound at boot or is unbound for want of a bindable service, never to a
tester. decision-http returns an allowlisted binding (instance and change)
on a binding confirmation and fixed next-step text on an approved resolve
and on a binding hire start. The decision page names the copy and the
change; the receipt shows the next step; the Agents grid shows can't launch
with the binding's next step. Every new string is fixed text.
The workflow editor checks the writer's PLAN_NAME (lowercase letters, digits
and dashes, starting with a letter), so a name the bus would refuse no longer
reaches it with step guidance. A new workflow under a name its scope already
holds is refused on the page instead of replacing that workflow. A pack
preview the page cannot draw says so rather than leaving Preview disabled.
The browser test launches Chromium with --disable-extensions.
The bus sends each hire's credential lines as {service, scope} (scope absent
when a definition names a service without scopes). The picker destructured
them as tuples, so a real preview threw and never rendered. The browser test
fixture now uses the producer's shape.
The Tasks board takes the selected organization's board: its labels and column order over the five
fixed states, and its default layout unless the viewer saved one. The all-organizations view keeps
the fixed labels. The organization page gains the owner's starter pack picker (list, preview with
marks, flagged lines, credential lines and noHire marks, apply by digest) and a workflow list and
editor that marks a step role naming no current role. Every organization- or pack-supplied string
goes through esc or textContent.
The workspace read carries each organization's and project's board. GET /api/orgs/<id>/workflows
is the owner's read of the workflows, the role names a step may resolve to and the file revision.
packsServes pins HEAD and GET /api/board to the Board read, never the pack route.
- serve.mjs: only GET and HEAD /api/board stay the Board read; every
other method goes to the pack route, so DELETE and PUT answer its 405
again. The owner-only check moves inside packsHTTP after the method
check, so OPTIONS on a root Console stays 405 as before SP4.
- runtime.mjs: a --as rename cannot target the definition name human,
and a human step role never follows a rename. A step whose mapped
roles collide refuses invalid-request at preview, not only at apply.
- The no-op apply skip also needs the same pack sha256, so a changed
pack with nothing to add still records its entry.
- Tests: the --as refusals for human, a step role collision, a pack
defining human, a changed saved pack recording its entry, board by
PUT, a granted session refused owner-only on every pack route, and a
Console without sign-in refused owner-only.
Design section 8. The bus answers packs, pack.preview, pack.apply,
board.set and workflow.set to the organization's human, and their
.console forms to the owner's Console cap. The broker runs the section 3
merge, the plan digest (pack-plan-stale on a mismatch) and the held
credential check. The organization writer keeps packs, board and
workflows out of the generic write and refuses definition writes to
every actor name an agent carries, project agents included.
mosaic org pack list|preview|apply, board set and workflow set|remove
go over the organization's bus as its human and refuse inside an agent
shell before any file is read. The Console serves GET /api/orgs/<id>/packs,
packs/preview, packs/apply, board and workflows/<name> (POST and
DELETE) to the root owner's session only, writes under --send only.
Build review (changes 8) and security review (changes 4):
- P1-1: an owner-approved fire no longer writes the revoke before the
apply (decision-stale). The fire stops the copy's runs, the fire is
written, then the retire revoke starts for the fired instance.
- P2 (both): archive and delete from the CLI and the Console pass the
organization's managed Gitea remote step (copyRemoteFor). A remote
step that was not attempted or failed keeps the record revoking with
failed remote, so the bus finishes it after restore; no done tombstone
over a live token.
- Security P2-1: a bound server that cannot be read is a failed remote
step, not not-managed. updateOrg refuses project-repo-bound when a
project a copy binding grants loses or changes its remote or git.
- P3-1 (security): a delete whose organization file cannot be read says
copiesUnreadable, never an empty copy list.
- P3-2 (security): the remote step requires the record's incarnation to
equal the registry's live one.
- P3-5 (build): the archive's slot discard checks each parent directory
(no symlink, own uid, private mode).
- P3-6 (build): resume keeps credential-revoke-failed as the gate code
while a failed op runs again.
- P3-4 (build): a test pins the refused-begin reopen guard.
A copy binding grants the repositories its projects' remotes name when a
credential is issued, and its decision records only project names. repo set
(CLI, route, Settings tab) is now refused with project-repo-bound while a
pending or bound copy binding names the project, before any check, origin
change or write, and again under the lock. The message names the copies and
the next step: revoke the binding, set the repository, raise a new binding
decision. An unbound binding, or none, behaves as before. Bindings are read
from the loader-validated document; binding, launcher and broker code are
unchanged. New refusal-table entry for project-repo-bound.
The check's ssh client accepts any host key, so an answer over ssh shows
only that something at that address speaks git. Security review P2: a
reachable or needs-credential ssh outcome now adds "the ssh host key was
not verified"; https and unreachable outcomes are unchanged.
The needs-credential line no longer promises that a binding will supply
one; it says the check sends none. A recorded check is shown only for
the URL it checked. The Settings section says when the git origin differs
from the recorded repository, and a save repairs it. The URL rule message
names what is refused. Tests cover a document write that fails after
origin is set, the drift line and its repair, and Quick Setup in remote
mode.
Remote mode sets the project checkout's origin and checks it once with
git ls-remote, with no credential, no prompt, a protocol allowlist of
https and ssh and a 15 second limit. The receipt reports reachable,
needs-credential or unreachable with git's error summarized. Nothing is
pushed. URLs are https or ssh only; ext:: and other helpers, file://,
local paths, option-like values and credential-bearing URLs are refused.
`mosaic org project repo set` changes a project's repository later, both
ways between remote and local only, through the same rules and check,
with a revision guard and an org.project.repo.set receipt. The Console's
organization project Settings tab edits it through
/api/orgs/ID/repo/project/PROJECT; Quick Setup accepts ssh and shows the
check.
P1-4: org restore starts the bus as mosaic bus start ID --dev-local-owner
--detach would, and its receipt names the bus. Where that start is refused
(deployed or stamped instance, agent run) restore refuses before changing
anything; --no-bus keeps the old restore. The Console Restore action
restores and starts the bus with one receipt, and offers Restart bus when
the start fails after a good restore.
P1-5: Quick Setup refreshes the sidebar organization list, and the
organization dashboard redraws on the config event Restart bus already
dispatches, so the bus line and System types follow without a reload.
Security review:
- Release verification cache keys on ctime as well as mtime, in
nanoseconds. A same-size rewrite with mtime set back now re-hashes and
reports proxy-install-invalid.
Build review:
- The setup page hides the account panels on any failed accounts read, not
only proxy-down, and brings them back once the proxy answers.
- The organizations table shows a dash, not a made-up 0, when a bus does
not answer or sends no model list (orgCatalogue in proxy-admin.mjs).
- A fence clear the bus did not answer keeps the confirmed restart for a
retry.
- A fence with no readable time names `mosaic proxy fence clear
--proxy-restarted` on the page, in the refusal table and in the README.
- CLI `init --generate-key` goes through the setup controller and writes
the same init receipt as the page.
- Status carries the last ten receipts, so the page shows them after a
reload. An initialized proxy keeps the init form folded.
- README: proxy-admin-busy is per process; the cross-process locks that
serialize the writes are named.
One Proxy setup panel on the Model proxy settings page takes an owner from
nothing to a running proxy: status with one next-step button per state, the
pinned fetch with hash checks, progress and a receipt, init with a
bus-generated key (a pasted key only over loopback or HTTPS, with a
confirmation), unit render/install/start/stop/restart with health, a fence
clear that the bus re-proves against a confirmed restart, and a stale init
lock clear that names its blockers. Own proxy per organization shows as not
built.
New Console routes under /api/proxy/admin/ use the existing owner proxy
checks; agents, testers and grant holders get human-required. New bus verbs
proxy.init {generate:true} and proxy.fence.clear. Receipts go to
<dataRoot>/state/proxy-admin.jsonl with labels and key ids only. Every new
refusal code has a refusal-table entry.
CLI: mosaic proxy status, unit render|status|install|start|stop|restart,
init --generate-key, fence clear --restart, init-lock status|clear; proxy
fetch keeps its stdout and adds progress and the receipt.
Page fix found in the end-to-end run: a stopped proxy hides the account
panels until the service answers. (The catalogue switch label fix found in
the same run landed upstream as D3 P0-4.)
A stop that may already have signalled the host (a timeout or an
unexpected error) is trailed as failed, not refused; only exit 3 comes
before the signal. The response's stopped flag follows what busStop
reports, so a host that exited on its own between the read and the stop
is not reported as stopped by this press.
POST /api/orgs/ID/stop/bus runs busStop the way mosaic bus stop does: a
graceful SIGTERM close that leaves no host.lock or writer.lock, so an
offline schema migration can open the store straight after. It follows
restartBus for authority, same-origin checks, trail and receipt. A bus
already stopped answers done with state stopped and changes nothing; a
host identity the Console cannot prove refuses with every file unchanged.
The organization header gains a Stop bus button beside Restart bus, one
press, sharing its receipt and busy state. The restart icon now lives
inside its button, so a wide receipt no longer pulls it off the button.
CB0: registry incarnation minted at reserve (legacy entries get one at
the first binding proposal, under the registry lock); copyId, source
and definition pin, binding generation; a pure resolver where
effective = role intersect approved and only a bound, matching,
unshadowed record resolves.
CB1: copyBindings in the organization file (ids, scope names, project
ids and integers only). applyCopyBindingDecision is its only writer,
behind a module-private capability every other commit is fenced
against. A binding is an owner-only subtype of the hire decision:
only the chief raises it, no autonomy level, resolver agent, member
right, tester or reader resolves it. Digest, expiry, single
consumption, revision, generation, incarnation and definition pin are
rechecked before any effect; a bind writes pending, an unbind the
unbound tombstone, receipts are paths only. Nothing writes bound, so
nothing launches on a binding yet (CB2/CB3). The org service and the
Console update path keep copyBindings server-held. Eight new refusal
codes with next steps.
Build review P2: the supervisor ignores a lost reply pipe and keeps
supervising. Security P2: a stop signal during start is held until the
start settles, and the CLI's start timeout signals the supervisor's
process group. Security P1 (part): console start --dev-local-owner
refuses inside an agent run. Tests cover review, confirm and reverse on
the org autonomy route; TOOLS.md and the webui README are corrected.
A --dev-local-owner Console's organization pages read writable:false because
the per-org options had no autonomy writer and the route fell back to the
request transport, which org options never set. The org options now carry an
autonomy writer on the organization's console transport, fenced to the four
owner autonomy verbs. The route prefers it and keeps requestWrite otherwise.
mosaic console start --dev-local-owner --detach now runs the Console under a
detached supervisor, so Restart Console (exit 75) relaunches it on the same
address. A non-dev detached Console is unchanged. A deployed --sso --send
Console has no organization routes and keeps its root autonomy transport;
a test pins both.
- busRecover: a live pid with the recorded start time is the recorded process, so it refuses
("bus host identity is uncertain") whatever its argv. It used to read a mismatching argv as a dead
host. The pinned recovery test now covers a reused pid (live, other start time) as the wrong
process, and a new test covers the refusal.
- busRecover clears through setAside: each inspected entry is renamed aside and checked by device
and inode; a swapped entry puts everything back and refuses before any receipt or deletion, and
the deletion names only the aside entries.
- mosaic bus recover refuses inside an agent run (refuseInsideAgent), like mosaic org reload. The
Console-start revive does nothing when the Console's own environment carries an agent marker.
- Tests: org-recovery (identity, agent refusal), org-revive (setAside swap), bus-revive (markers);
the other reviveBuses tests pass an explicit env.
- The Console-start revive asks busRevive for pm:false; reviveStartOptions holds the rule (never
wider than the dead host's record) and is tested on its own. A dropped --pm is logged with the
way back.
- A Restart bus press waits for that organization's start-up revive (revivePending) before it reads
the bus, so it no longer races it for the lifecycle lock; a press that still meets org-locked gets
409 bus-busy, nothing changed.
- busRevive marks an error from busStart after a successful clear (error.recovered); the trail, the
Console log and the press response then say "failed", not "refused". A non-CliError logs its code.
- Tests: bus-revive.test.mjs (new), org-admin and org-revive cases for the above.
A Console unit stop (KillMode=mixed) SIGKILLs the bus hosts the Console
started, leaving host.json, host.lock and the socket behind, and the
dev Console's Restart bus refused 409 on that stale state.
- busRevive (org-bus): busRecover, then busStart detached on the
options the dead host recorded. busRecover still refuses a live host
pid, a lock that is not the dead host's, a live writer pid, or a
socket that answers or is uncertain.
- reviveBuses (webui): when a dev-local-owner Console starts, a bus that
answers is left (reattached); a bus with stale state goes to busRevive
with pm:false, trailed as bus.revive before anything changes.
- Restart bus (org-admin): for the exact dev owner only, a stale-state
refusal goes to busRevive; a signed-in owner keeps the refusal.
- The receipt reads "Dead bus host cleared; bus started".
The catalogue refusals no longer tell every user to press Disable model
proxy catalogue. The server text names the proxy setup step. The Routing
page adds the Disable step only when cliproxy is listed and every moved
model comes from another listed provider, and sends a tester to the
owner. The switch mismatch message no longer claims a setting changed.
Tests: a fallback thinking-only change saves with no catalogue; a move
between model-proxy models refuses before and after cliproxy is removed.
A fixture-only organization reads a ready catalogue with no model proxy
client: the catalogue asks the proxy only when a module calls it.
A thinking-only change, and a limits patch that keeps harness, model and
entry, no longer asks the catalogue. A change that truly needs it still
refuses, and the WebUI names the next step: keep the model and change
thinking, or press Disable model proxy catalogue. The Routing switch
follows whether cliproxy is listed and removes or adds only cliproxy.
D4 review fix round.
P2: the org inbox took the hire form's HTML before its workspace read, so typing or a
submit result that landed during a slow read was painted over with the older draft.
inboxPage now takes a function and calls it while building the page after the read.
Two browser cases hold the inbox read: typing during it, and a refused start that
resolves during it, both survive the repaint (both fail on the previous commit).
P3: a hire start passes a bus code through only when the broker raises it before it
records the decision (hire-decisions prepare: the model route codes,
definition-not-hireable, definition-shared, no-chief-of-staff). Every other code,
including revision-conflict-revoked, request-timeout, invalid-envelope,
incomplete-request and codes the resolve or apply steps can raise, stays
outcome-unknown. Messages are worded for hire, fire and change alike.
D4, readiness P0-1 and P1-2.
On an org Console, #/inbox now carries the hire, fire and change form
below "Answered today". It posts to the current organization's bus
through the same decision endpoint and verb (hire.start.console); the
organization field is read-only. Inputs carry focus keys, so a poll
repaint keeps the draft, focus and caret.
A hire start the bus definitely refused now keeps its own code. The
model route codes (model-provider-unavailable and its kin) get a next
step. Any other definite code is named, and the message never claims
that nothing was recorded. A lost or unreadable reply is still
outcome-unknown. The templates, confirmation and resolve steps are
unchanged.
PR #1916 rule: a refusal names the field or file, never a config value
or a host path. readJsonFile's three refusals and parseJsonFileText now
name the file by its `what` label only. Callers whose label alone is
ambiguous add a name that already passed a strict pattern (business id,
role name, org id, turn id, project key) or a fixed path under the data
root. Exit codes, refusal codes and check order are unchanged.
organization: util, access, project, config-command, library-seats,
org-service deleteOrg receipt, agent-levels regex; T1 files role.mjs and
organization-config.mjs change only the readJsonFile label.
cli: access lock, accounts owner, host state/lock, notifier journal,
notify-config, run-evidence, dev-fixture, git-socket, org-bus, org-console.
discord: turn record label names the turn id.
Sentinel tests (sk-test-NOT-A-SECRET-1234 as a path component) cover each
changed refusal and fail on BASE; old path pins updated.
The rehearsal provider matches routes on the parsed pathname, so a
query string no longer turns authorize or token into a 404. Authorize
and token answer 403 to any method before the GET check, and only
discovery and the JWKS answer 405 to another method. R20 now sends a
POST to token and a GET to authorize with a query, and expects 403 for
both.
The upstream A2 agent-levels write test stubbed an owner session
without rootOwner. M3 sets the hook's owner flag from rootOwner, as
sso.mjs grants it, so the stub now carries rootOwner: true, as
system-types-http does. No check changes.
An installed unit must equal the render but for the copy id, so a
re-pin that adds --sso refused render-refused. case2-unit gains --check
(every render check, nothing written) and --check-new (a first install's
checks). stack-upgrade runs both checks before anything stops, and
--next-args reads root's <instance>.args.next: equal before -- but for
--copy, different after it. After the stage it moves the installed unit
files into a new <instance>.replaced.XXXXXX directory and renders a
first install. A failure moves them back unchanged and restarts the old
copy, and confirm swaps the args file. The run sheet gives the commands,
the rollback past the migration included.
A stamped rehearsal now starts an isolated provider on 127.0.0.1 port 0
with a certificate and keys made for the run. It serves discovery and a
JWKS for the live provider ids and answers 403 to authorize and token.
Only the scratch Console trusts its certificate. The gate requires each
provider ready (sso-ready); provider-discovery requires discovery and
JWKS fetches and no code or token request. The provider stops with the
run, and by itself once the run's shell is gone.
The system-path test helper asserts the log's from copy again. The
pinned-copy sign-in requests are bounded, and cleanup waits for each
Console to exit.
stack-release refuses a user-unit activate, rollback or pm-on when the
instance shows any accounts sign (stamped target, accounts.json,
console.sso, .deployed), before anything stops. Root renders the system
units with case2-unit.sh, and the op runs with --units external.
case2-unit renders a stamped copy's units only with --sso, console.sso,
an accounts.json that loads and a valid .deployed, and names each
missing step in run-sheet order before any write. Per Jason's ruling of
2026-11-10, a stamped library unit takes --sso and refuses proxy-preview
admission and its proof. The unstamped and dev paths are unchanged.
rehearse runs a stamped copy against rehearsal.invalid with scratch
slot placeholders, a copy of the live accounts.json and the copy's own
.deployed. It refuses sso-not-prepared and accounts-not-initialized
before any rehearsal directory exists, and sso-isolated before the host
starts.
The tests that turned SSO on through the user unit now pin the refusal
and reach the same end state through the system path. The copy tests
start the Console on real scratch prerequisites and pin each refusal.
The run sheet, TOOLS.md and the accounts design record the ruling and
the migration order.
Review fix round for slice A3.
- Every project's union is recomputed from the current organization file
at each load. A refused union refuses the project's own copies and every
inherited root or org agent there: no mount at launch (checkout-skipped,
project-refused), no thread and no room, each naming the project and why.
- A project exclude removes that project's mount from the excluded agent;
a narrow reaches the instance's resolved limits, so its real bundle is
narrowed. A narrow in any project narrows the instance for every launch,
since one launch mounts every project it works in.
- Two copies whose instance names collide both refuse, naming each
claimant; the view lists the claimants. An organization instance of the
same name replaces a root or project copy, at boot and after it, and the
copy is gone rather than refused.
- Rooms hold only the thread instances that work in the room's project.
- The grid finds an agent's copy by name and project from the bus view,
never by rebuilding the instance name.
- Real-boot regressions: inherited agents in a refused union, exclude and
narrow in the bundle, an org override after boot, two organizations each
running a copy, a root file change while running, and a grid fed by a
booted bus.
Each root agent an organization does not exclude, and each agent a project
defines, becomes a copy when the organization's bus boots. The root file is
read once, through loadRootAgents, at the cli boot step; the snapshot is fixed
until the next boot. A bound copy joins the organization document's roles and
goes through validateBusinessDocument and checkRoles with the organization's
own credential map. A copy whose role needs a credential service is unbound
and refuses at launch by name and service (credential-unbound); a copy the
organization refuses is copy-refused; every agent in a project whose union
refuses is project-refused, naming the project. A project agent launches
only with its own project's mounts and takes a thread only in its project
(project-agent-elsewhere). Refusal events carry the code alone. The bus's
instances read carries the copies with their running runs, and the Agents
grid shows each copy's real status and reason.
channel-proof re-pins webui bus.mjs for four STATUS entries; no proof or
transport change. packages/business gets the agent-copies.mjs re-export.
The CLI agent verbs validate the instance config through loadSystem before
any read or write, and print a fixed line for errors they do not own. The
root writer refuses a config directory with an ancestor another user can
write without the sticky bit. The project HTTP route checks agent names
with the organization ID_PATTERN and answers 400 naming the key.
The Settings level forms take their own class, so the role-instance
handlers no longer catch them, and keep both drafts in module state with
the revision each began at. The organization writer tests now reach the
file's own uid check and test the assistant protection with an assistant
in the fixture.
jason.woltje