docs(remediation): sharpen D-8 — the conformance harness must itself be conformance-tested

Per Mos. Two requirements, both load-bearing:

RM-02: the gate registry must SELF-VERIFY that every registered case demonstrably
runs and demonstrably fails on a known-bad input. Presence in the registry is not
evidence. A check is not trusted until it has been shown to fail. This is mutation
testing / negative control at the registry level — the conformance harness must
itself be conformance-tested. RM-55 inherits the same recursion: the harness must be
observed red before its green means anything.

Reviewer disclosure: rev-974 could have silently substituted a working fixture and
reported AC2 PASS, and nothing would have caught it. The 'if a check is unrunnable,
say so rather than silently substituting' clause is what makes a PASS mean anything,
and must appear in every reviewer brief this mission issues.

Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>

.prettierignore

@@ -4,6 +4,14 @@ pnpm-lock.yaml
 **/node_modules
 **/drizzle
 **/.next
+# Python build/test artifacts — same category as node_modules/dist/.next above.
+# Prettier must never scan generated trees; without these a local venv poisons
+# `pnpm format:check` with thousands of third-party files.
+**/venv
+**/__pycache__
+**/.mypy_cache
+**/.pytest_cache
+**/htmlcov
 .claude/
 docs/tess/TASKS.md
 docs/scratchpads/

.woodpecker/ci.yml

@@ -41,6 +41,11 @@ steps:
       # (Constitution + dispatcher + each RUNTIME.md slice). See DESIGN §7 / R9.
       - bash packages/mosaic/framework/tools/quality/scripts/check-resident-budget.sh --self-test
       - bash packages/mosaic/framework/tools/quality/scripts/check-resident-budget.sh
+      # Test-membership guard (#1017): also first link of test:framework-shell.
+      # Invoked from BOTH surfaces it audits (F2, PR #1018) — the guard is link
+      # [0] of the pnpm chain, so severing that chain would silence it together
+      # with everything it guards; this direct line keeps one instrument running.
+      - bash packages/mosaic/framework/tools/quality/scripts/check-test-enumeration.sh
 
   # Blocking gate (#791): a framework upgrade must never write or delete an
   # operator-owned path. The HARD GATE proves an unanticipated operator sentinel

docs/remediation/BOARD-LEDGER.md

@@ -0,0 +1,15 @@
+<!-- board-roll: 1 entry rolled from BOARD.md -->
+
+### **D-1 / P-ACTIVATION + hygiene — committed `.npmrc` hard-pins `store-dir=/root/.local/share/pnpm/store`.**
+
+Correct for the CI container (runs as root), fatal for EVERY non-root local checkout: `EACCES` on `/root/.local/share/pnpm/store/v10/server/server.json`. A committed config that only works on one runtime is exactly the activation-skew class. Fix candidate: make store-dir env-overridable, not hardcoded.
+
+<!-- board-roll: 2 entries rolled from BOARD.md -->
+
+### **D-3 / P-FLEET-001 — the seats running this mission are UNMANAGED.** `mos-remediation`, `rev-974`,
+
+`planner-opus`, `planner-sol` appear in NO roster (`~/.config/mosaic/fleet/roster.yaml`, `agents/`). Planners run on socket `default`; the roster declares `mosaic-fleet`. This is the exact "one roster-owned socket/host + quarantine unmanaged + stale GC" failure P-FLEET-001 indicts — observed on the remediation mission's own fleet. Prerequisite for INBOX identity-addressing.
+
+### **D-2 / hygiene — husky `prepare` fails `EPERM` copying into root-owned `.husky/_/`.** Repo working
+
+tree has root-owned dirs (`.husky/`, repo root) under a non-root agent. Worked around with the intended `HUSKY=0` escape hatch (does NOT disable the existing pre-commit/pre-push hooks).

docs/remediation/BOARD.md

@@ -0,0 +1,94 @@
+# mos-remediation — LIVE BOARD (keep < 8 KB)
+
+**Phase:** EXECUTING — first PR merged; RM-01 in flight; all 3 decisions ruled.
+**Updated:** 2026-07-31 (mos-remediation orchestrator; seat active on `mosaic-fleet`).
+
+## Head
+
+- Mission charter + 15 decisions + 4-build plan: PERSISTED (`docs/remediation/MISSION.md`).
+- HOLD lifted for this workstream (Jason 2026-07-31). Nothing implemented yet — planning first.
+- Orchestrator seat `mos-remediation` is LIVE and owns the mission. Residency attestation: PASS.
+- **TASK-0 DONE** — checkout repaired, all three gates green HONESTLY (no `--no-verify`), branch pushed.
+- **TASK-1 DONE** — both planners delivered independently on clean context; reconciled into `TASKS.md`
+  (58 tasks across P0–P5, 7 convergences, 7 adjudicated disagreements, 3 escalated decisions).
+- **NEXT ACTION IS NOT MINE:** DECISION-1/2/3 (`TASKS.md` §5) must be ruled before P0 dispatch.
+  RM-01 is dispatchable immediately regardless — it depends on nothing and blocks everything.
+
+## In-flight
+
+| Task                                              | Owner           | State                                                              |
+| ------------------------------------------------- | --------------- | ------------------------------------------------------------------ |
+| PR #1026 docs (mission record + backlog)          | mos-remediation | OPEN, retargeted to main, rebased; diff verified docs-only         |
+| PR #1025 hygiene                                  | —               | **MERGED** 52414605; rev-974 APPROVE + CI #2158 8/8 terminal-green |
+| DECISION-1 wire-in point (charter change)         | Mos / Jason     | ESCALATED — both planners reject the charter's target              |
+| DECISION-2 rollback artifact + availability trade | Jason           | ESCALATED                                                          |
+| DECISION-3 RM-03 vs parked PR #1023 ownership     | Mos             | ESCALATED                                                          |
+| RM-01 reproducible checkout (unblocks everything) | unassigned      | READY TO DISPATCH                                                  |
+
+## Fleet seats
+
+- mos-remediation — project orchestrator (Claude, /src/mosaic-stack, socket `mosaic-fleet`) — ACTIVE
+- planner-opus — adversarial planner (robustness), Opus 5, socket `default` — DELIVERED, idle
+- planner-sol — adversarial planner (pragmatic), gpt-5.6-sol, socket `default` — DELIVERED, idle
+- rev-974 — mosaicstack reviewer identity (id 16, write:repository) — idle, on call
+- Mos (mos-claude) — lead coordinator, socket `default` — relay path to Jason
+
+## Gate status
+
+- Delivery gates active: author≠reviewer, diff-blind pre-registered checks, CI-green, merged-PR completion.
+- Freeze: LIFTED for this workstream only.
+- Git identity: `MOSAIC_GIT_IDENTITY=mos-dt-0` INTERIM. Mos ruled gate-16 HOLDS (author≠reviewer is what
+  gate-16 protects; rev-974 reviews, mos-dt-0 never self-reviews). Dedicated identity TRACKED, Mos provisions.
+- Remote control: native `/remote-control` NOT wired in this runtime. Path is **Mos-relay**
+  (Jason ↔ mos-claude via Discord ↔ mos-remediation via agent-send). Not a blocker.
+
+## Sequencing (from MISSION.md)
+
+1. Spine + choke-point service (MACP wiring @ mosaic_orchestrator.py::run_single_task) + PG/Redis
+   ⚠ **CONTESTED — see DECISION-1.** Both planners independently reject this wire-in point: that
+   controller is `"enabled": false` and references a dispatcher that does not exist here. Charter text
+   left UNCHANGED pending Mos/Jason ruling; do not treat it as settled.
+2. Rotation daemon (finish Mission Control Plane, reuse packages/coord)
+3. Comms service (envelope→service→PG/Redis→adapters)
+4. Hygiene + conformance harness
+   Cross-cutting retirements: flat-file tracking, 3 MACP islands, silent MOSAIC BYPASS.
+
+## Dogfood evidence — live failure classes, not hypotheticals
+
+> Newest first. Oldest entries roll to `BOARD-LEDGER.md` via `board-roll.sh` when this file
+> exceeds its 8 KB cap. Keystone detail is duplicated in `TASKS.md` §1a, so rolling loses nothing.
+
+<!-- BOARD-ROLL:START -->
+
+### **D-8 / P-CONFORMANCE-001 — a PRE-REGISTERED acceptance check that was not runnable as written.**
+
+PR #1025 AC2's fixture `mkdir -p apps/*/venv/lib` creates a literal `apps/*/venv/lib` dir when the glob is unmatched — it did not test what it claimed. rev-974 ran it exactly as written, caught it, re-ran the intended assertion at an explicit path, and **disclosed** rather than silently substituting a working fixture and reporting PASS. **Pre-registration protects a check from being retrofitted to the implementation; it does not make the check correct.** An unverified gate appeared inside the mechanism built to catch unverified gates. Hard requirement on RM-02: the registry must self-verify that every registered case runs AND can fail — presence is not evidence.
+
+### **D-7 / P-FLEET-001 — stale-GC-on-disk: shared 30G /tmp hit 100% ENOSPC, degrading two seats.**
+
+~5.2G was session scratch dead 8-9 days (this session's own footprint: 88K). Same missing capability as orphaned-tmux-session GC, applied to disk — not a quota or discipline problem. Resolved manually by Mos (lead coordinator) after independent verification; `/tmp` now 79%. **The gap IS the finding:** the authority to reap exists, the deterministic reaper does not. Folded into RM-50 with explicit requirements (mechanical liveness, age threshold, dry-run, audit event per reap — never a heuristic sweep). Refusing to unilaterally delete another session's scratch was correct doctrine; the fix is a reaper, not braver agents.
+
+### **D-6 / P-QUEUE-001 — the mandated queue guard returned PASS on an UNKNOWN state, live, today.**
+
+Running the required `ci-queue-wait.sh --purpose push` before pushing produced `state=unknown ... exit 0` — the exact defect at `ci-queue-wait.sh:282-288` that PR #1023 is parked on. It also evaluated `branch=main` rather than the branch being pushed. The mission's own required pre-push gate passed me on an indeterminate result. Third independent live instance of the class.
+
+### **D-5 / P-QUEUE-001 + P-CONFORMANCE-001 — KEYSTONE: an inert gate that erased its own evidence.**
+
+Merged PR #868 (`b79336a8`) shipped a file that FAILS `pnpm format:check` ⇒ the CI format gate did not block. An unrelated later PR (#872) then reformatted that file via its own `lint-staged`, so `main` went green again and nobody learned the gate had failed to fire. Verified blob-level under the repo's own config. **Detection must be per-merge-commit against that commit's own tree** — a "is main green today" check reports all-clear on this exact defect. Binding on RM-02/RM-55. Full chain in `TASKS.md` §1a. NOT quiet-patched, by Mos's ruling: patching the symptom destroys the signal.
+
+### **D-4 / P-LIFECYCLE + hygiene — a dispatched agent silently IGNORED an in-message context reset.**
+
+planner-sol was at 64.3%/372k; the brief asked it to reset first; it began work on dirty context anyway. Only an out-of-band `/new` driven by the orchestrator guaranteed clean state. Confirms the postmortem thesis: **instructions are not enforcement.** Reset must be a mechanical pre-dispatch step, not a request.
+
+<!-- BOARD-ROLL:END -->
+
+## Decisions log
+
+- 2026-07-31 — Mission set up by Mos post-postmortem (15/15 decided). Dogfood posture active.
+- 2026-07-31 — Mos: stale `.mosaic/orchestrator/mission.json` is RESIDUE of the disabled Python
+  orchestrator rail that this plan RETIRES. Do NOT invest in it; do NOT build on that rail. The 0/0
+  milestone banner is cosmetic. (Supersedes any plan to repair it.)
+- 2026-07-31 — Mos: planners must be dispatched with GUARANTEED clean context, not requested-clean.
+  Prior default-socket planner sessions predate this mission; dirty context is the indicted hygiene.
+- 2026-07-31 — mos-remediation: worker briefs forbid all git ops and restrict each worker to a single
+  named output file, so two planners can share one checkout without a branch race (M2-era incident doctrine).

docs/remediation/DECOMP-SOL.md

@@ -0,0 +1,424 @@
+# Adversarial Decomposition — Pragmatic / Shortest-Path Side
+
+**Planner:** `planner-sol`  
+**Bias:** make one real fleet task pass through one enforced path as early as possible; reuse before building.  
+**Scope source:** `MISSION.md`, `MACP-WIRING-SCOUT.md`, `BOARD.md`, existing `@mosaicstack/macp`, `packages/coord`, PG/Valkey, Tess durable inbox/outbox, and the Mission Control PRD.
+
+## Executive position
+
+The first useful milestone is **not** “complete Builds 1 and 2.” It is this narrow vertical slice:
+
+> A DB-backed mission task is atomically claimed by `packages/coord`, executed by one Node `@mosaicstack/macp` TaskExecutor, gated, and terminally recorded with identity-bound events and a tri-state mutation result. No `docs/TASKS.md`, `mission.json`, `tasks.json`, Python gate loop, or NDJSON ledger participates.
+
+That slice is **SOL-03 → SOL-04 → SOL-05 → SOL-06 → SOL-07 → SOL-08**, estimated at **72K tokens**, mostly Codex. PG polling is acceptable for this first proof. Redis acceleration follows only after correctness is observable. This is the shortest path that is both dogfoodable and not throwaway work.
+
+### Cost posture
+
+- **25 PR tasks, ~294K tokens total:** ~164K Codex, ~130K Sonnet, **0K Opus**.
+- First live choke-point dogfood: ~72K on the hard path; SOL-01 and SOL-02 can run beside it.
+- Opus is not justified for planned implementation. Escalate only if an independent security review finds an unresolved architecture-level authority flaw.
+- Every row is one PR. Estimates include implementation, focused tests, docs affected by that PR, and one remediation pass—not orchestration/reviewer overhead.
+
+## Gates and critical path
+
+| gate                                        | opens when     | proof required before downstream work                                                                     |
+| ------------------------------------------- | -------------- | --------------------------------------------------------------------------------------------------------- |
+| **G0 — trustworthy launch gates**           | SOL-01, SOL-02 | non-root checkout works; queue status cannot become false-green                                           |
+| **G1 — first dogfood / minimum viable cut** | SOL-08         | one live fleet task completes DB → MACP executor → gates → DB with no flat-file state                     |
+| **G2 — Builds 1+2 closed**                  | SOL-09..SOL-12 | all producers use the executor; duplicate islands retired; Redis loss is recoverable from PG              |
+| **G3 — rotation real**                      | SOL-13..SOL-16 | stale generation cannot mutate; fresh session resumes typed state; Pi-brick recovery works without broker |
+| **G4 — sole-path comms real**               | SOL-17..SOL-22 | roster identity is stable; bounced/stale messages converge through PG/Redis and adapters                  |
+| **G5 — mission proof**                      | SOL-23..SOL-25 | workflow sweep cannot capture unknown files; fault bank passes, including 100 rotations                   |
+
+**Critical path:** `03 → 04 → 05 → 06 → 08 → 10 → 12 → 13 → 14 → 15 → 16 → 17 → 18 → 19 → 20 → 21 → 22 → 24 → 25`.
+
+## Ordered task list
+
+### SOL-01 — Repair activation coherence and non-root checkout hygiene
+
+- **build:** 5 (hygiene; pulled forward)
+- **depends_on:** —
+- **acceptance criteria (diff-blind testable):**
+  1. A clean non-root checkout can run dependency/bootstrap preparation without accessing `/root`.
+  2. A root CI checkout still uses an isolated writable pnpm store.
+  3. Activation installs CLI, hooks, broker/runtime assets, and version manifest transactionally: induced failure leaves the prior complete generation active.
+  4. Launch with a deliberately skewed component version is rejected with the exact repair command; diagnostics remain usable.
+  5. No test uses `--no-verify` or suppresses hooks.
+- **dogfood seed:** BOARD D-1 root-pinned `.npmrc` and D-2 root-owned Husky path.
+- **est. tokens:** 6K
+- **suggested runtime tier:** codex
+
+### SOL-02 — Make queue guard fail-safe with exit-asserting tests
+
+- **build:** 1
+- **depends_on:** —
+- **acceptance criteria (diff-blind testable):**
+  1. Fixture responses `pending`, `success`, `failure`, no-status, malformed JSON, provider error, and unknown status produce explicitly asserted process exits.
+  2. Only terminal success/no-active-queue returns 0; unknown, malformed, and transport failure return non-zero with actionable output.
+  3. A payload larger than 150 KiB is consumed without argv expansion or truncation.
+  4. At least one mutant changes unknown→success and is killed by the test suite.
+- **dogfood seed:** inert gate-6 and recursive #1019 failure (unknown→exit 0; ARG_MAX).
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-03 — Complete the canonical MACP contract, not another protocol
+
+- **build:** 1
+- **depends_on:** —
+- **acceptance criteria (diff-blind testable):**
+  1. `@mosaicstack/macp` validates typed Task, TaskResult, lifecycle Event, state Claim, and `verified | written-unverified | failed` mutation outcome records.
+  2. Claims require source, confidence, issued-at, TTL/expiry, refresh instruction, and HMAC integrity; tamper/expiry returns a typed refusal, never partial data.
+  3. Lifecycle events include launch, mission generation, checkpoint, rotation, recovery, inbox receipt, and terminal disposition while preserving existing task events.
+  4. `MOSAIC_AGENT_NAME` is required for mutating execution and appears in credential/actor binding; missing identity fails closed.
+  5. Target metadata requires repository identity, task/record ID, and head or generation where applicable.
+- **dogfood seed:** rev-974 identity drift plus the three observed write outcomes.
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-04 — Add the narrow PG orchestration spine schema
+
+- **build:** 2
+- **depends_on:** SOL-03
+- **acceptance criteria (diff-blind testable):**
+  1. Migration up creates mission, task, dependency, task-claim, MACP event, typed state-claim, session-generation, and dispatch-outbox records with tenant/mission keys and uniqueness constraints.
+  2. The database rejects a task without a mission, a dependency outside its mission, duplicate idempotency keys, and terminal→running regression.
+  3. Event and claim records reference canonical mission/task/generation identities; claims store integrity metadata.
+  4. Migration rollback on an empty test DB succeeds; rerunning migration is safe.
+  5. No comms-specific “universal message” schema is invented here; Build 4 reuses/extends existing interaction inbox/outbox tables.
+- **dogfood seed:** mission convention existed but a lane could act with no mechanically valid mission/task.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-05 — Implement atomic PG task claims, transitions, ledger, and outbox
+
+- **build:** 2
+- **depends_on:** SOL-04
+- **acceptance criteria (diff-blind testable):**
+  1. Two concurrent claimers for one runnable task yield exactly one lease owner.
+  2. Dependencies are evaluated transactionally; an unmet dependency can never be claimed.
+  3. Claim, state transition, MACP event, and dispatch-outbox append commit atomically or all roll back.
+  4. Expired leases are reclaimable with a higher fencing generation; stale owners cannot complete or mutate.
+  5. Querying mission status is derived solely from PG and returns the next runnable task deterministically.
+- **dogfood seed:** model-maintained live board and stale claims surviving session changes.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-06 — Build the one production Node MACP TaskExecutor
+
+- **build:** 1
+- **depends_on:** SOL-03, SOL-05
+- **acceptance criteria (diff-blind testable):**
+  1. A public Node executor accepts only a claimed canonical MACP Task, resolves credentials/identity, runs the worker, runs structured gates, and persists terminal result/events through SOL-05.
+  2. Worker exit 0 plus a failed gate cannot produce `completed`; worker failure cannot skip terminal ledger emission.
+  3. Claude, Codex, and Pi fixture backends emit the same runtime-neutral lifecycle sequence.
+  4. Every mutation returns one mandatory tri-state outcome; callers cannot compile while discarding it.
+  5. Crash after worker success but before terminal commit leaves a recoverable fenced claim and no false completion.
+- **dogfood seed:** stranded MACP, gate-6 inert completion, and `written-unverified` being treated as success.
+- **est. tokens:** 16K
+- **suggested runtime tier:** sonnet
+
+### SOL-07 — Provide one-shot flat-file import and cutover readiness audit
+
+- **build:** 2
+- **depends_on:** SOL-05
+- **acceptance criteria (diff-blind testable):**
+  1. A dry-run parses existing mission/TASKS artifacts, reports unsupported/ambiguous rows, and performs zero writes.
+  2. Apply is idempotent and records source digests; repeated apply creates no duplicates.
+  3. Unknown status, dangling dependency, duplicate task ID, and malformed table block import with row-level diagnostics.
+  4. Readiness reports “cutover-ready” only when imported PG projections exactly match source counts/dependencies/statuses.
+  5. This command is migration-only; it exposes no dual-write or ongoing sync mode.
+- **dogfood seed:** current remediation board/TASKS state needs a clean DB landing without silently losing tasks.
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-08 — Hard-cut `packages/coord` to PG and dogfood one live task
+
+- **build:** 1
+- **depends_on:** SOL-06, SOL-07
+- **acceptance criteria (diff-blind testable):**
+  1. `mosaic coord run/status/continue` reads and mutates PG only; absent/unmigrated DB state fails with the SOL-07 repair path.
+  2. No fallback reads/writes `docs/TASKS.md`, mission JSON, task JSON, state JSON, results JSON, or events NDJSON.
+  3. A live canary task assigned to a fleet seat travels PG claim → TaskExecutor → worker → gate → terminal PG result/event and closes only after gate success.
+  4. Killing the coordinator after claim and restarting it neither duplicates execution nor allows the stale lease to close the task.
+  5. Evidence query shows actor seat, mission/task, target metadata, gate results, and tri-state outcome.
+- **dogfood seed:** this remediation mission itself; reproduce a gate-6-style non-null task and identity-bound write.
+- **est. tokens:** 16K
+- **suggested runtime tier:** sonnet
+
+> **G1 FIRST-DOGFOOD:** stop and validate here before broadening. If SOL-08 cannot carry a real task, do not build Redis, rotation, comms, or UI.
+
+### SOL-09 — Route Forge and OpenClaw/MACP producers through TaskExecutor
+
+- **build:** 1
+- **depends_on:** SOL-08
+- **acceptance criteria (diff-blind testable):**
+  1. Forge and the OpenClaw MACP runtime submit the canonical Task type to SOL-06; neither executes a worker or gate itself.
+  2. Their success callbacks are derived from canonical terminal results, not local/stub completion.
+  3. A failed canonical gate is observed identically from Coord, Forge, and OpenClaw fixtures.
+  4. Repository search plus an executable import boundary test finds no production-local redefinition of Task/TaskResult/GateResult on these paths.
+- **dogfood seed:** Forge’s immediate empty-gate completion and the plugin’s redefined MACP-shaped result.
+- **est. tokens:** 10K
+- **suggested runtime tier:** codex
+
+### SOL-10 — Retire flat-file orchestration and the disabled duplicate rail
+
+- **build:** 1
+- **depends_on:** SOL-09
+- **acceptance criteria (diff-blind testable):**
+  1. The Python controller execution/gate/event path, `tasks_md_sync`, plugin-local protocol types, orphaned context loader, and production flat-file orchestration writers/readers are absent from shipped assets.
+  2. Framework guides/templates/startup context point to DB mission commands, not `docs/TASKS.md` as orchestration SoR.
+  3. A regression scan fails CI if production code reintroduces `events.ndjson`, `tasks.json`, `mission.json`, or `docs/TASKS.md` orchestration mutation.
+  4. jarvis-brain PDA flat files and unrelated project docs remain untouched.
+  5. Upgrade removes/quarantines obsolete generated rail files without deleting user source/docs.
+- **dogfood seed:** three parallel islands and stale `.mosaic/orchestrator/mission.json` 0/0 residue.
+- **est. tokens:** 14K
+- **suggested runtime tier:** sonnet
+
+### SOL-11 — Add Redis hot dispatch as a derived outbox consumer
+
+- **build:** 2
+- **depends_on:** SOL-08
+- **acceptance criteria (diff-blind testable):**
+  1. Task creation commits mission/task/outbox in PG before any Redis enqueue.
+  2. Induced Redis failure leaves the task durable and pending; a sweeper later enqueues it exactly once logically.
+  3. Deleting the Redis queue and rebuilding from PG restores all non-terminal dispatches without reviving terminal tasks.
+  4. Duplicate delivery is neutralized by PG claim fencing/idempotency.
+  5. Existing `packages/queue` adapter/config is reused; no second broker API is introduced.
+- **dogfood seed:** inert/unknown queue transport and broker outage during task dispatch.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-12 — Lock Builds 1+2 with black-box failure cases
+
+- **build:** 2
+- **depends_on:** SOL-02, SOL-10, SOL-11
+- **acceptance criteria (diff-blind testable):**
+  1. A black-box suite proves: unknown queue status blocks; malformed task blocks; gate failure blocks completion; dropped identity blocks mutation; HMAC corruption forces refresh; Redis loss recovers from PG; stale lease cannot close.
+  2. The suite invokes shipped CLI/service boundaries, not internal mocks.
+  3. Every asserted failure checks process/result status and durable terminal/non-terminal state.
+  4. The same canary task succeeds under Claude, Codex, and Pi adapters or a documented unavailable-runtime fixture fails explicitly.
+- **dogfood seed:** gate-6/#1019, identity drift, and built-but-unwired MACP.
+- **est. tokens:** 8K
+- **suggested runtime tier:** sonnet
+
+### SOL-13 — Bind session authority to contract hash and generation
+
+- **build:** 3
+- **depends_on:** SOL-12
+- **acceptance criteria (diff-blind testable):**
+  1. Launch computes a stable hash over the effective Constitution/AGENTS/runtime/skills set and stores it with session generation.
+  2. Policy change or compaction detection marks the generation stale before any subsequent mutation.
+  3. A stale/mismatched generation can read diagnostics but cannot claim, write task state, acknowledge comms, merge, or close.
+  4. Re-attestation creates a new generation; old credentials/leases remain fenced.
+  5. Hash input order/path normalization is deterministic across two clean launches.
+- **dogfood seed:** compacted orchestrator losing directives and D-4 ignoring an in-message reset.
+- **est. tokens:** 12K
+- **suggested runtime tier:** sonnet
+
+### SOL-14 — Persist compact typed rotation checkpoints using Coord primitives
+
+- **build:** 3
+- **depends_on:** SOL-13
+- **acceptance criteria (diff-blind testable):**
+  1. Checkpoint contains mission/task, completed/blocked state, next three actions, constraints, claims, contract hash/generation, and cursors—never transcript text.
+  2. Checkpoint is HMAC-verified before rehydration; corrupt/expired/missing required claims refuse resume and request deterministic refresh.
+  3. Writing checkpoint and rotation-intent event is atomic in PG.
+  4. Existing Coord continuation capsule semantics are reused; no competing handoff schema/file is created.
+- **dogfood seed:** manual MOS-ORCHESTRATION-BOARD checkpoint and incomplete-rehydration risk.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-15 — Finish the deterministic coordinator rotation daemon
+
+- **build:** 3
+- **depends_on:** SOL-14
+- **acceptance criteria (diff-blind testable):**
+  1. Configured token threshold triggers checkpoint → revoke old authority → terminate → launch fresh → verify rehydration in that order.
+  2. Compaction-detected is a backstop that forces the same rotation path; it never requests recursive compaction.
+  3. A launch failure leaves the mission recoverable and visibly paused, not assigned to two active generations.
+  4. Ephemeral seats die/respawn without mission checkpoint; persistent/orchestrator seats rotate.
+  5. The implementation extends `packages/coord`; untracked `apps/coordinator` residue is not revived.
+- **dogfood seed:** planner-sol dirty-context dispatch and the old coordinator’s log-only `_check_context()` behavior.
+- **est. tokens:** 16K
+- **suggested runtime tier:** sonnet
+
+### SOL-16 — Add broker-independent recovery and remove silent MOSAIC BYPASS
+
+- **build:** 3
+- **depends_on:** SOL-15
+- **acceptance criteria (diff-blind testable):**
+  1. With Redis/broker unavailable, a diagnostic/bootstrap command can inspect PG mission state, repair broker configuration, and resume without traversing the broker gate.
+  2. Normal recovery remains broker-gated and is labeled as such.
+  3. Break-glass requires explicit scope and expiry, emits a durable event, displays a loud banner, and auto-expires; permanent/silent bypass text or behavior is absent.
+  4. The Pi-brick fixture recovers the broker, then returns to normal gated operation without editing source/config by hand.
+  5. Orchestrator guidance removes “/compact and continue” only after the rotation command is available; ephemeral guidance remains explicit.
+- **dogfood seed:** Pi brick and silent `MOSAIC BYPASS 2026-07-22`.
+- **est. tokens:** 12K
+- **suggested runtime tier:** sonnet
+
+### SOL-17 — Converge each host on one roster-owned lifecycle domain
+
+- **build:** 5 (hygiene; hard prerequisite for addressed comms)
+- **depends_on:** SOL-16
+- **acceptance criteria (diff-blind testable):**
+  1. Reconcile establishes exactly one roster-declared tmux socket/lifecycle domain per host.
+  2. Unknown sessions are reported and quarantined; they are never killed without positive unmanaged classification.
+  3. Max-age/max-context stale sessions invoke SOL-15 rotation for persistent seats or reap for ephemerals.
+  4. Seat identity survives respawn and equals the roster/MOSAIC_AGENT_NAME binding.
+  5. A fixture matching the current four unmanaged remediation seats converges them or produces explicit quarantine actions.
+- **dogfood seed:** scout-bounce and BOARD D-3 seats split between default and `mosaic-fleet` sockets.
+- **est. tokens:** 14K
+- **suggested runtime tier:** codex
+
+### SOL-18 — Publish authenticated `comms/v1` envelope and compatibility rules
+
+- **build:** 4
+- **depends_on:** SOL-13, SOL-17
+- **acceptance criteria (diff-blind testable):**
+  1. Envelope validates protocol version, message/idempotency ID, sender/recipient seat identity, class, ordering/coalesce key, creation/expiry, correlation, payload digest, and authentication.
+  2. Current and immediately previous supported protocol versions are accepted; unsupported versions are rejected loudly with supported range.
+  3. Framework/runtime version is diagnostic metadata and never the compatibility key.
+  4. Forged sender, changed recipient/payload, expired envelope, and replay with conflicting content fail closed.
+- **dogfood seed:** wrong-socket bare tmux message with no authoritative sender/recipient receipt.
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-19 — Build the logical PG-first comms service with tmux adapter
+
+- **build:** 4
+- **depends_on:** SOL-18
+- **acceptance criteria (diff-blind testable):**
+  1. Sending commits envelope/payload and PENDING state in PG before adapter delivery.
+  2. State machine enforces PENDING → RECEIVED → CONSUMED or DEAD-LETTER; illegal regressions are rejected.
+  3. Recipient-filtered claims and append/coalesce policy are deterministic by message class.
+  4. tmux is a dumb adapter: delivery failure changes no PG authority state and is retryable.
+  5. Existing Tess durable repository/state-machine patterns are extended or generalized; no new deployable microservice or second inbox framework appears.
+- **dogfood seed:** MACP scout bounce that was discovered only by manual liveness check.
+- **est. tokens:** 16K
+- **suggested runtime tier:** sonnet
+
+### SOL-20 — Make `agent-send` use the sole path and prove stale-message handling
+
+- **build:** 4
+- **depends_on:** SOL-19
+- **acceptance criteria (diff-blind testable):**
+  1. Normal `agent-send` creates a comms/v1 record and observes RECEIVED/CONSUMED; it cannot directly invoke tmux.
+  2. A wrong/missing socket leaves PENDING with retry diagnostics, then reaches RECEIVED after roster repair without resending.
+  3. A stale coalescible message arriving after a newer terminal message is marked superseded/consumed and is not surfaced as live work.
+  4. Duplicate identical send is idempotent; same ID with changed content is rejected.
+  5. Inbox receipt/terminal disposition emits canonical MACP lifecycle events.
+- **dogfood seed:** scout-bounce and #1018 stale-consumed message arriving after merge.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-21 — Add Redis Streams hot delivery and PG reconciliation
+
+- **build:** 4
+- **depends_on:** SOL-11, SOL-20
+- **acceptance criteria (diff-blind testable):**
+  1. PG commit precedes XADD; induced XADD failure is repaired by sweeper.
+  2. Consumer uses a PEL; ack sequence is PG CONSUMED commit before XACK.
+  3. Redis flush/restart rebuilds pending delivery from PG without duplicating consumed messages.
+  4. Pending, abandoned, and dead-letter transitions are observable with bounded retry/backoff.
+  5. Existing Redis/queue connection/configuration is reused.
+- **dogfood seed:** delivery bounce plus broker loss between durable write and hot enqueue.
+- **est. tokens:** 12K
+- **suggested runtime tier:** codex
+
+### SOL-22 — Prove adapter pluggability with the existing Matrix connector
+
+- **build:** 4
+- **depends_on:** SOL-21
+- **acceptance criteria (diff-blind testable):**
+  1. Existing Matrix connector consumes/produces comms/v1 through SOL-19 without owning authority state.
+  2. The same envelope can fail tmux and later deliver through Matrix while producing one logical message lifecycle.
+  3. Matrix retry/reconnect cannot regress PG state or duplicate CONSUMED work.
+  4. Removing Matrix availability leaves PG/Redis/tmux behavior intact.
+- **dogfood seed:** cross-socket scout notification bounce; alternate reach must not become alternate authority.
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-23 — Constrain auto-sync and agent writes by allowlist and lease
+
+- **build:** 5
+- **depends_on:** SOL-10
+- **acceptance criteria (diff-blind testable):**
+  1. Auto-sync stages only an explicit allowlist; an unknown modified/untracked docs/source file remains unstaged and is reported.
+  2. Agent source/docs writes require the correct worktree/lease; two seats cannot acquire the same mutable target concurrently.
+  3. Generated files are positively identified, not inferred by denylist.
+  4. The measured annotation/index mid-write fixture cannot be swept into an unrelated commit.
+  5. DB orchestration state is absent from repository staging concerns.
+- **dogfood seed:** auto-sync sweep commit `517bd5c26` capturing agent-authored docs mid-write.
+- **est. tokens:** 8K
+- **suggested runtime tier:** codex
+
+### SOL-24 — Build the real-artifact lifecycle conformance harness
+
+- **build:** 5
+- **depends_on:** SOL-16, SOL-17, SOL-22, SOL-23
+- **acceptance criteria (diff-blind testable):**
+  1. Harness launches shipped CLI/runtime artifacts and fault-injects compaction, broker outage, delivery bounce, identity drop, stale contract hash, queue unknown/malformed, Redis loss, and auto-sync collision.
+  2. One deterministic test executes 100 sequential rotations with no lost/duplicated task, claim, receipt, or terminal disposition.
+  3. Tests assert DB state/event order and process exits, not log substrings alone.
+  4. Harness runs against isolated PG/Redis namespaces and cleans only resources it created.
+  5. Every banked dogfood seed has a named case and evidence output suitable for CI/release attachment.
+- **dogfood seed:** the complete failure bank: Pi brick, scout-bounce, gate-6/#1019, identity drift, auto-sync, #1018 stale-consumed, D-4 dirty context.
+- **est. tokens:** 18K
+- **suggested runtime tier:** sonnet
+
+### SOL-25 — Complete operator cutover docs and activation proof
+
+- **build:** 5
+- **depends_on:** SOL-01, SOL-02, SOL-10, SOL-16, SOL-22, SOL-24
+- **acceptance criteria (diff-blind testable):**
+  1. Operator docs give exact DB import/cutover, rollback-before-cutover, recovery, break-glass expiry, rotation, comms, quarantine, and conformance commands.
+  2. Link/command checks find no orchestrator instruction to mutate flat-file mission/tasks, use silent bypass, direct-tmux normal comms, or “compact and continue” a persistent seat.
+  3. A clean non-root install activates one coherent version and runs the conformance smoke subset.
+  4. Release evidence maps all 15 decisions and every live seed to a passing check or an explicit deferred item below.
+- **dogfood seed:** activation skew plus the tendency to leave built fixes unwired or undocumented.
+- **est. tokens:** 6K
+- **suggested runtime tier:** codex
+
+## Explicit DEFER list (10)
+
+These are not rejected; they are **past first dogfood** and should not delay G1/G2. Each is gold-plating unless a live failure makes it necessary.
+
+1. **DEFER — Mission dashboard/TUI views.** CLI/DB queries are enough to operate and prove the spine.
+2. **DEFER — PRD-to-board automatic decomposition.** This is LLM/judgment-heavy and unrelated to enforcing already-decided tasks.
+3. **DEFER — General heuristic churn scoring.** Implement token threshold + compaction sensor first; repeated-tool-loop inference can follow measured need.
+4. **DEFER — Discord comms adapter.** Existing plugin reach remains; migrate only after tmux+Matrix prove the service contract.
+5. **DEFER — Slack comms adapter.** No current dogfood dependency.
+6. **DEFER — Telegram comms adapter.** No current dogfood dependency.
+7. **DEFER — Public MCP comms surface.** `agent-send` and service API are sufficient for the mission proof.
+8. **DEFER — Protocol-v2 features/general negotiation framework.** Ship v1 with a bounded current/previous acceptance window; do not predict v2.
+9. **DEFER — Multi-region/HA PG or Redis.** Existing in-stack PG+Redis and rebuildability satisfy current failure classes.
+10. **DEFER — Event analytics/search UI and long-term warehouse.** Indexed PG evidence plus CLI queries is enough for audit/conformance.
+
+## Suspect abstractions register
+
+| proposed thing                           | verdict                                                                                                                                                  |
+| ---------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Canonical Node `TaskExecutor`            | **JUSTIFIED:** explicitly required single choke point; wraps existing MACP functions rather than replacing them.                                         |
+| PG repository methods                    | **JUSTIFIED but narrow:** ordinary adapters around existing Drizzle/DB patterns, not a new “state platform.”                                             |
+| Rotation daemon                          | **JUSTIFIED:** finishes `packages/coord`; do not revive `apps/coordinator` or create another service.                                                    |
+| Comms service                            | **JUSTIFIED only as a logical in-process boundary:** reuse Tess durable inbox/outbox and existing connectors; no new deployable microservice this cycle. |
+| Universal queue/broker abstraction       | **SUSPECT / DO NOT BUILD:** reuse `packages/queue`, PG outbox, and Redis Streams/BullMQ configuration already present.                                   |
+| Universal envelope/state framework       | **SUSPECT / DO NOT BUILD:** MACP Task/Claim/Event and comms/v1 have different bounded purposes.                                                          |
+| Generic compatibility-negotiation engine | **SUSPECT / DEFER:** a small supported-version check meets v1 needs.                                                                                     |
+
+## Dissent (7)
+
+1. **Do not wire new production behavior into `mosaic_orchestrator.py::run_single_task`.** The scout correctly identified the duplicated block, but BOARD’s later ruling says the disabled Python rail is residue and must be retired. Building a Node bridge only to delete it is throwaway. Put the Node TaskExecutor in `@mosaicstack/macp`, route the live Coord path to it at SOL-08, migrate remaining producers at SOL-09, then delete the Python block at SOL-10.
+2. **Redis is not on the first-dogfood critical path.** PG claim/polling is sufficient for one real task and exposes correctness earlier. Add Redis only after G1; otherwise queue debugging obscures whether the choke point works.
+3. **“One choke-point service” does not justify a new deployable service.** An exported executor plus Coord daemon is enough. A new Nest app, RPC protocol, deployment, auth layer, and health plane would be greenfield.
+4. **The Mission Control PRD’s file-first and board-regeneration assumptions are superseded.** Keep its mission/rotation semantics, but obey the accepted hard DB cutover; do not implement its file-first milestones or PRD-to-board generator now.
+5. **Do not gate every interactive runtime launch as if it were a mission task.** Enforce every tracked task/data mutation at the executor/DB authority boundary. Ephemeral interactive shells may launch, but receive no task mutation authority unless attached to a valid claim.
+6. **Do not implement broad “churn intelligence.”** Token threshold and compaction-detected are deterministic sensors. Repeated-loop semantic detection is expensive, noisy, and premature until telemetry demonstrates a gap.
+7. **The 100-rotation test is a final conformance bar, not an early unit-test tax.** First prove one rotation, then fault cases, then 100 repetitions in SOL-24. Requiring 100 before G3 would delay feedback without changing the design.
+
+## Orchestrator reconciliation notes
+
+- Pre-register each task’s acceptance checks from this document before showing implementation diffs to its reviewer. Author and reviewer remain different seats.
+- SOL-07 permits a one-time import, **not** an interim store: no shadow writes, dual reads, or sync daemon.
+- G1 is the budget escape hatch. If the 72K hard-path slice does not work, stop and remediate instead of spending the remaining ~222K.
+- Docs belong in each behavior-changing PR where required; SOL-25 is cross-link/cutover validation, not permission to postpone essential docs.

docs/remediation/KICKSTART.md

@@ -0,0 +1,44 @@
+# mos-remediation — Orchestrator Kickstart / Compaction-Survival Resume
+
+**You are `mos-remediation`, the project orchestrator for the Mosaic Stack remediation, launched in `/src/mosaic-stack`.**
+This file is your fail-closed resume procedure. Read it on EVERY fresh/cleared session and on the FIRST turn
+after any compaction. This mission's whole point is that manual compaction-survival is fragile — so follow this
+mechanically until Build 3 (rotation) makes it automatic.
+
+## On resume (do in order, before any orchestration action)
+
+1. `cd /src/mosaic-stack` and confirm you are on the remediation working branch.
+2. Read `docs/remediation/MISSION.md` — the charter (goal, 4 builds, 15 decisions, sequencing, directives).
+3. Read `docs/remediation/BOARD.md` — the LIVE state: current phase, in-flight tasks, fleet seat assignments,
+   gate status. This is your single source of in-flight truth (kept small).
+4. Read the discussion checkpoint for full rationale if needed:
+   `../jarvis-brain/docs/scratchpads/postmortem/REMEDIATION-DISCUSSION-STATE.md` (or the jarvis-brain repo path).
+5. **Residency attestation (fail-closed):** restate from the reloaded files — (a) the goal in one line, (b) the
+   current build/phase, (c) the BOARD head (in-flight tasks + who owns them). If you cannot, HALT and re-read.
+   Do NOT act on memory alone; a compaction may have dropped context silently.
+
+## Standing invariants (never violate)
+
+- **North star:** deterministic-right-answer → code/gate; LLM only for judgment.
+- **Delivery gates:** author≠reviewer; PRE-REGISTERED diff-blind checks committed before reading the diff;
+  CI terminal-green; completion = merged PR + closed issue. rev-974 = the mosaicstack reviewer identity.
+- **Dogfooding:** every fix validated against its live seed case (MISSION.md lists them).
+- **Tracking → DB** (hard cutover); do NOT re-invest in flat-file tracking. jarvis-brain PDA is off-limits.
+- **Git identity:** export `MOSAIC_GIT_IDENTITY=<your-seat>` so wrappers author correctly and survive respawn.
+
+## After every significant event
+
+Overwrite stale lines in `BOARD.md`, keep it < 8 KB, commit + push. The board IS your checkpoint until the
+DB-backed rotation daemon (Build 3) exists. Persist typed state (phase, tasks, owners, gates) — never the transcript.
+
+## Fleet
+
+- Adversarial planners: `planner-opus` (robustness), `planner-sol` (pragmatic) — dispatch for task decomposition; reconcile their oppositional decomps.
+- Coders/reviewers: dispatch per roster + delivery gates. Comms: `~/.config/mosaic/tools/tmux/agent-send.sh`
+  (`-L <socket> -s <dst> -S <yourhost>:<yourseat> --class <class>`); always pass `-S`.
+- Lead coordinator: Mos (`mos-claude`). Escalate only on the Constitution's escalation triggers.
+
+## Remote control
+
+On first startup, activate remote control for this session (`/remote-control`) so Jason can reach/drive you while
+away. If the command is unavailable in this runtime, report it to Mos and continue — it is not a blocker.

docs/remediation/MACP-WIRING-SCOUT.md

@@ -0,0 +1,98 @@
+# MACP wiring investigation
+
+**Scope:** `/src/mosaic-stack` inspected at HEAD `b79336a8c11e2a4646a47ff8d295a226e0c71404`; read-only. Existing dirty/untracked state was not touched.
+
+## Verdict
+
+**(c) STRANDED.** `packages/macp` is exported, unit-tested, and registered as a CLI command group, but no production dispatch/execution code invokes its credential resolver, gate runner, or event emitter.  
+A separate MACP-named OpenClaw/orchestrator rail exists, but it redefines task/result types and gate/event logic instead of importing `@mosaicstack/macp`; direct `mosaic yolo|claude|codex|opencode|pi` also bypasses it.
+
+## 1. Production call sites vs tests
+
+### Production references to `@mosaicstack/macp`
+
+| Surface                 | Evidence                                                                                                                               | Actual use                                                                                                                                                                |
+| ----------------------- | -------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Unified CLI             | `packages/mosaic/src/cli.ts:8,385`                                                                                                     | Imports and registers `registerMacpCommand`; no task/gate/event execution.                                                                                                |
+| Forge                   | `packages/forge/src/types.ts:1,17,68,79`                                                                                               | **Type-only** imports of `GateEntry` and `TaskResult`. Pipeline calls an injected abstract executor at `packages/forge/src/pipeline-runner.ts:189-190,299-300`, not MACP. |
+| Mosaic package metadata | `packages/mosaic/package.json:36`; `packages/mosaic/src/runtime/update-checker.ts:172`                                                 | Dependency/update inventory only.                                                                                                                                         |
+| Agent                   | No match under production `packages/agent/src/**`                                                                                      | No MACP import/call.                                                                                                                                                      |
+| Coord                   | No match under production `packages/coord/src/**`; dependency list is only `@mosaicstack/types` at `packages/coord/package.json:25-27` | No MACP import/call.                                                                                                                                                      |
+| Plugins                 | No `@mosaicstack/macp` import under `plugins/**`                                                                                       | No package use; the MACP-named plugin is an independent implementation (below).                                                                                           |
+
+**Repository-wide production call-site search result:** excluding `packages/macp/**`, tests, worktrees, and build output, there are **zero** calls to `runGate`, `runGates`, `emitEvent`, `appendEvent`, or `resolveCredentials`.
+
+### `packages/macp` implementation is internally connected only
+
+- Public exports: `packages/macp/src/index.ts:1-48` exports Task/GateEntry/MACPEvent/TaskResult, credential resolution, `runGate(s)`, risk-floor, and event emission.
+- Gate runner calls its own event emitter: `packages/macp/src/gate-runner.ts:187-236`.
+- Event persistence implementation appends NDJSON to a caller-supplied path: `packages/macp/src/event-emitter.ts:11-27`.
+- There is **no exported programmatic `submit` implementation** in `packages/macp/src/index.ts:1-48`; only the CLI placeholder named `submit`.
+
+### Test-only invocations
+
+- Gate runner: `packages/macp/__tests__/gate-runner.test.ts:96-242` invokes `runGate/runGates`.
+- Event ledger: `packages/macp/__tests__/event-emitter.test.ts:46-133` invokes `appendEvent/emitEvent` against temporary `events.ndjson` files.
+- Credential resolver: `packages/macp/__tests__/credential-resolver.test.ts` exercises resolver behavior.
+- CLI tests only verify command registration: `packages/macp/src/cli.spec.ts:37-73`; `packages/mosaic/src/cli-smoke.spec.ts:8` imports registration.
+
+## 2. Gate on the live dispatch path
+
+### Direct Mosaic runtime launch bypasses MACP
+
+- Runtime commands dispatch directly to harness launch: `packages/mosaic/src/commands/launch.ts:730-801`.
+- Claude/Pi go through the lease broker, then spawn the runtime: `packages/mosaic/src/commands/launch.ts:817-843`.
+- Commander wiring sends `mosaic yolo <runtime>` and direct runtime commands to `launchRuntime`: `packages/mosaic/src/commands/launch.ts:1102-1157,1165-1167`.
+- None of those ranges imports/calls `@mosaicstack/macp`, `runGates`, or `emitEvent`.
+
+**Result:** a direct `mosaic yolo`, `mosaic claude/codex/opencode/pi`, or underlying exec does not create a typed MACP Task, run the package gate-runner, or append a package MACPEvent.
+
+### Coord bypasses MACP
+
+- Coord reads/updates `docs/TASKS.md`: `packages/coord/src/runner.ts:6,306-386`; parser/writer is `packages/coord/src/tasks-file.ts:326-377`.
+- Coord launches a child process directly: `packages/coord/src/runner.ts:397-427`.
+- Mission state is its own `.mosaic/orchestrator/mission.json`/`next-task.json`: `packages/coord/src/mission.ts:8-12`; `packages/coord/src/runner.ts:15-16,355-384`.
+
+**Result:** Coord task execution has no MACP Task validation, package gate runner, or event append.
+
+### Forge bypasses MACP execution
+
+- Forge defines its own `ForgeTask` and abstract `TaskExecutor`: `packages/forge/src/types.ts:48-80`.
+- The production CLI injects a **stub executor** that immediately reports completion with empty gates: `packages/forge/src/cli.ts:13-31,167,185`.
+
+**Result:** even `mosaic forge run` does not execute MACP gates or persist MACP events.
+
+### Separate MACP-named rail is not `packages/macp`
+
+- OpenClaw plugin registers an ACP backend named `macp`: `plugins/macp/src/index.ts:1-18,72-102`.
+- It locally redefines `OrchestratorTask`, `TaskResult`, and gate-result shapes instead of importing package types: `plugins/macp/src/macp-runtime.ts:43-77`.
+- It appends directly to `.mosaic/orchestrator/tasks.json`, triggers an external controller, and polls `results/<task>.json`: `plugins/macp/src/macp-runtime.ts:290-329,437-483`.
+- The controller independently implements `append_event`, `emit_event`, shell execution, gate execution, and results: `packages/mosaic/framework/tools/orchestrator-matrix/controller/mosaic_orchestrator.py:29-91,126-276`.
+- Its gate loop runs raw string gates after worker success: `mosaic_orchestrator.py:213-235`; it does not support the package's structured `GateEntry`/AI-review behavior.
+- Current checkout disables this controller: `.mosaic/orchestrator/config.json:2` (`"enabled": false`).
+- Plugin references `tools/macp/dispatcher/pi_runner.ts` at `plugins/macp/src/macp-runtime.ts:85-91`, but `tools/macp/` does not exist in this checkout.
+
+**Result:** there is a parallel, optionally enabled MACP-shaped rail, not package integration. It cannot make `packages/macp` the enforced path.
+
+## 3. Event ledger status
+
+- Package persistence exists only as a library primitive: `packages/macp/src/event-emitter.ts:11-27` appends JSON lines to an arbitrary `eventsPath`.
+- Package event emission is reached only from package `runGates`: `packages/macp/src/gate-runner.ts:204-236`.
+- No production caller invokes package `runGates/emitEvent/appendEvent`; therefore no runtime destination path is configured for the package ledger.
+- Test-only ledgers use temp paths: `packages/macp/__tests__/event-emitter.test.ts:35-133`; gate tests use temp `events.ndjson`: `packages/macp/__tests__/gate-runner.test.ts:171-242`.
+- The separate Python controller writes `.mosaic/orchestrator/events.ndjson`: `mosaic_orchestrator.py:129-133,159-161,219-235`; the Mosaic Framework plugin only **reads** that file for context at `plugins/mosaic-framework/src/index.ts:279-316,430-438`.
+- In this checkout, `.mosaic/orchestrator/events.ndjson` is absent and the controller is disabled (`.mosaic/orchestrator/config.json:2`).
+
+**Conclusion:** `MACPEvent` from `packages/macp` is defined/tested but not emitted or persisted by live production call sites. The similarly shaped Python ledger is a duplicate island.
+
+## 4. Coord link
+
+- `packages/coord` has no `@mosaicstack/macp` dependency/import: `packages/coord/package.json:25-27`; no matches in `packages/coord/src/**`.
+- Coord's task model is Markdown `docs/TASKS.md` plus mission/session JSON: `packages/coord/src/tasks-file.ts:1-10,257-377`; `packages/coord/src/mission.ts:8-12`; `packages/coord/src/runner.ts:306-427`.
+- It does not consume `.mosaic/orchestrator/events.ndjson`, MACP Task, MACPEvent, GateEntry, or TaskResult.
+
+**Conclusion:** Coord and `packages/macp` are disconnected islands.
+
+## Shortest wiring gap
+
+**Single integration point:** replace the duplicated execution/gate/event block in `mosaic_orchestrator.py::run_single_task` (`:126-276`) with one production Node `TaskExecutor` backed by `@mosaicstack/macp` (typed Task validation + `resolveCredentials` + `runGates` + `emitEvent`), and make Coord/Forge/OpenClaw submit through that executor. This queue/controller choke point is where `yolo|acp|exec` worker outcomes can be gated and journaled before completion is recorded.

docs/remediation/MISSION.md

@@ -0,0 +1,79 @@
+# Mosaic Stack Remediation — Mission Charter
+
+**Owner:** project orchestrator `mos-remediation` (Claude, launched in `/src/mosaic-stack`).
+**Origin:** 2026-07-16..31 fleet lifecycle postmortem. **Status:** PLANNING (task decomposition).
+**HOLD lifted** for this workstream by Jason, 2026-07-31 — "begin full mosaic fleet operation on this."
+
+## Goal
+
+Convert the 15 accepted postmortem remediation proposals into a working, **dogfooded** implementation.
+**North star:** anything with a deterministic right answer moves OUT of the LLM into a deterministic
+gate/program; the LLM handles only genuine judgment.
+
+## Decision record (authoritative, immutable)
+
+- **15/15 proposals decided: 13 accept, 2 modify (P-AUTHORITY-001, P-INBOX-001), 0 reject.**
+- Site + `annotations.json`: `jarvis-brain/docs/postmortem-spec/site/` (committed, origin/main).
+- Discussion checkpoint (rich rationale per proposal): `jarvis-brain/docs/scratchpads/postmortem/REMEDIATION-DISCUSSION-STATE.md`.
+- Postmortem report: mosaicstack/stack PR #107 (merged 88f4ee04).
+- MACP wiring scout (verdict c=STRANDED): `/tmp/macp-wiring-investigation.md` (copy into this dir — see TODO).
+
+## The plan — 15 proposals collapse to 4 builds + hygiene
+
+| Build                                                        | Absorbs                                 | What it is                                                                                                                                                                                                                                        |
+| ------------------------------------------------------------ | --------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| **1. One choke-point service** (mechanical enforcer)         | MISSION, STATE, AUDIT, WRAPPER, QUEUE   | Deterministic program every task/data mutation flows through. **Wire the stranded `@mosaicstack/macp`** in at `mosaic_orchestrator.py::run_single_task` — typed tasks, gate-runner, event ledger, credential binding, tri-state write outcomes.   |
+| **2. One durable spine + hot path**                          | (storage under everything)              | **PG system-of-record + Redis hot queue** (transactional-outbox). Mission/tasks/state-claims/audit-ledger/comms-inbox all land here.                                                                                                              |
+| **3. Rotation lifecycle** (finish the Mission Control Plane) | LIFECYCLE, CONTRACT, GUIDE, RECOVERY    | Coordinator daemon: contract-hash binding, compaction-detected → rotate-not-compact, checkpoint→fresh-session→rehydrate, broker-independent recovery. Deterministic, not an LLM. Reuse `packages/coord`; existing PRD at `docs/mission-control/`. |
+| **4. Comms service**                                         | AUTHORITY, INBOX (+ versioning roadmap) | Envelope (comms/v1) → sole-path service → PG/Redis → pluggable adapters (tmux→Matrix/Discord/Slack/Telegram). Version the protocol, not participants.                                                                                             |
+| **+ Hygiene & proof**                                        | FLEET, WORKFLOW, CONFORMANCE            | One roster-owned socket/host + stale GC; allowlist auto-sync; the conformance harness that fault-injects the failure classes and proves builds 1–4 hold.                                                                                          |
+
+## The finding that sets the cost
+
+**Built-but-unwired disease.** `@mosaicstack/macp` is stranded (nothing calls it); `packages/coord` primitives
+exist; the Mission Control PRD exists; PG + Redis already run in-stack. Three duplicate MACP islands, an
+orphaned context loader, a fail-open bypass. **Work = wire + consolidate + retire, NOT greenfield. "Finish, don't re-spec."**
+
+## Sequencing (skeleton — adversarial decomposition refines this)
+
+1. **Spine + choke-point service** (builds 1+2) — foundation; unlocks MISSION/STATE/AUDIT/WRAPPER/QUEUE at one integration point.
+2. **Rotation daemon** (build 3) on that spine — the drift fix proper.
+3. **Comms service** (build 4) — envelope → service → PG/Redis → adapters; retire direct-tmux.
+4. **Hygiene + conformance** (build 5) — fleet convergence, allowlist sync, dogfood harness.
+
+- **Cross-cutting retirements:** flat-file orchestration tracking (hard cutover to DB), the 3 duplicate MACP islands, the silent `MOSAIC BYPASS`.
+
+## Standing directives (Jason, 2026-07-31)
+
+- **Dogfooding:** validate EACH fix against the live fleet failure that motivated it. Seed acceptance tests:
+  Pi brick (RECOVERY), scout-bounce (INBOX/FLEET), gate-6 inert + #1019 recursion (QUEUE), identity drift
+  (WRAPPER), auto-sync sweep (WORKFLOW), #1018 stale-consumed (INBOX). The fleet is its own test bed.
+- **Orchestration tracking → DB**, hard cutover ("rip off the bandaid"), NO flat-file interim. jarvis-brain
+  PDA flat-files untouched. Current flat-file tracking runs as-is/unhardened until DB tracking is real, then one clean replace.
+
+## The 15 decisions (one-line; full rationale in the checkpoint)
+
+1. **P-ACTIVATION-001** accept — transactional CLI+hooks+broker+version release; block launch on skew, fail-SAFE.
+2. **P-AUTHORITY-001** MODIFY — structured authenticated inbox; envelope carries comms-PROTOCOL version; version the protocol not participants; N-version window.
+3. **P-LIFECYCLE-001** accept — rotation not recursive compaction; pre-empt at token threshold; enforcer = deterministic coordinator; = finish Mission Control Plane.
+4. **P-MISSION-001** accept — bind lanes to mission+task ledger; convention exists, ENFORCEMENT is the gap; mission+tasks → DB spine (hard cutover).
+5. **P-QUEUE-001** accept — repair queue transport + exit-asserting non-null-case tests (gate-6 was INERT fleet-wide; #1019 fix recursed the same bug).
+6. **P-STATE-001** accept — typed claims (source/confidence/TTL) not prose blob; MACP typed record; integrity fail-closed HMAC; don't fork a 4th island.
+7. **P-AUDIT-001** accept — MACPEvent lifecycle ledger; EXTEND enum to lifecycle events; runtime-neutral (executor-emitted); retire duplicate Python ledger.
+8. **P-WRAPPER-001** accept — identity derives from seat name + survives respawn; tri-state write outcomes MANDATORY; name safe target metadata.
+9. **P-CONTRACT-001** accept — bind session to contract hash; re-anchor on policy-change OR compaction-detected; stale generation loses authority MECHANICALLY.
+10. **P-INBOX-001** MODIFY — sole-path comms SERVICE; PG durable SoR + Redis hot queue (outbox, reconciliation sweeper); pluggable adapters; protocol-first, PG-first-then-Redis.
+11. **P-RECOVERY-001** accept — broker-independent bootstrap recovery; honest capability labeling; break-glass LOUD+AUDITED+TEMPORARY not silent permanent bypass.
+12. **P-GUIDE-001** accept — delete `/compact and continue` from orchestrator path (keep for ephemeral); removal = substitution (wire rotation trigger).
+13. **P-FLEET-001** accept — one roster-owned socket/host; quarantine unmanaged; stale-session GC; prerequisite for INBOX identity-addressing.
+14. **P-WORKFLOW-001** accept — auto-sync ALLOWLIST not denylist; worktree/lease isolation for agent docs/source; DB-tracking obviates the flat-file-sweep criterion.
+15. **P-CONFORMANCE-001** accept — fleet lifecycle harness on REAL runtime artifacts + fault injection; the 100-rotations-lossless bar is a test; target the DB substrate.
+
+## Fleet operating model
+
+- **Project orchestrator** `mos-remediation` (this seat) owns the mission; coordinates under Mos (lead).
+- **Adversarial task decomposition:** `planner-opus` (robustness) + `planner-sol` (pragmatic) each decompose
+  the plan independently; orchestrator reconciles into `TASKS.md`/DB tasks. Oppositional by design.
+- **Delivery gates (non-negotiable):** author≠reviewer, PRE-REGISTERED diff-blind acceptance checks committed
+  before reading the diff, CI terminal-green, completion = merged PR + closed issue. rev-974 = mosaicstack reviewer.
+- **Compaction survival:** see `KICKSTART.md` in this dir — the resume procedure. Persist typed state, not transcript.

docs/remediation/TASKS.md

@@ -0,0 +1,379 @@
+# Remediation Backlog — Reconciled Execution Plan
+
+**Owner:** `mos-remediation` (sole writer). Workers read; they never modify this file.
+**Sources:** [`DECOMP-OPUS.md`](./DECOMP-OPUS.md) (robustness, 38 tasks / 8 dissents) and
+[`DECOMP-SOL.md`](./DECOMP-SOL.md) (pragmatic, 25 tasks / 10 defers / 7 dissents), produced
+**independently** — neither planner read the other. Charter: [`MISSION.md`](./MISSION.md).
+**Status:** EXECUTING — all three blocking decisions RULED by Mos on 2026-07-31 (§5). **RM-01 is
+dispatched.** RM-03 is held pending Jason's disposition of PR #1023; nothing else is blocked.
+
+> **Provenance of the inputs (both clean).** `planner-opus` ran in a fresh session throughout.
+> `planner-sol` initially began work at 64.3% dirty context despite a brief instructing it to reset;
+> that run was **interrupted and discarded before it produced any output**, the seat was reset
+> out-of-band to 0.0%, and the brief was re-dispatched. `DECOMP-SOL.md` is the product of the clean
+> run only (it peaked at ~26% context). Both decompositions are therefore clean-context artifacts and
+> are weighted equally here. The discarded dirty run is banked as dogfood seed D-4 and as task RM-58 —
+> the failure it demonstrates is that _asking_ an agent to reset is not enforcement.
+
+---
+
+## 1. What the two planners agreed on without collusion
+
+Independent convergence is the strongest signal available here, because neither planner could see the
+other's file. Where both arrived at the same conclusion from opposite biases, I treat it as settled.
+
+| #   | Convergent finding                                                                                                    | OPUS                | SOL            |
+| --- | --------------------------------------------------------------------------------------------------------------------- | ------------------- | -------------- |
+| C1  | **The charter's wire-in point is wrong.** Do NOT wire the choke point into `mosaic_orchestrator.py::run_single_task`. | D2 (headline)       | Dissent 1      |
+| C2  | P0 hygiene/gate work must precede the spine, not follow it.                                                           | D1, phase P0        | G0, SOL-01/02  |
+| C3  | No new deployable microservice; the executor is a library + the coord daemon.                                         | implicit throughout | Dissent 3      |
+| C4  | Comms adapters beyond tmux are out of scope for this mission.                                                         | D7                  | DEFER 4/5/6    |
+| C5  | The "100 rotations lossless" bar is a late conformance gate, not an early tax.                                        | D4                  | Dissent 7      |
+| C6  | Redis is a derived hot path, never an authority; PG commits first.                                                    | R-013, R-054        | SOL-11, SOL-21 |
+| C7  | Reuse `packages/coord`; do NOT revive the untracked `apps/coordinator` residue.                                       | R-042               | SOL-15 AC5     |
+
+**C1 is the single most consequential output of this exercise.** The charter (`MISSION.md`) and my
+kickoff instruction both name `mosaic_orchestrator.py::run_single_task:126-276` as the integration
+point. Both planners independently rejected it on the same evidence: that controller is
+`"enabled": false` (`.mosaic/orchestrator/config.json:2`) and references a dispatcher path
+(`tools/macp/dispatcher/pi_runner.ts`) that does not exist in this checkout. Wiring the new choke
+point into a disabled rail produces **a stranded executor — the identical built-but-unwired disease,
+one layer up, that would look "done" in a PR.** The live paths are
+`packages/mosaic/src/commands/launch.ts` and `packages/coord/src/runner.ts`.
+This contradicted the charter and was escalated as DECISION-1 — **now RULED in the planners' favour by
+Mos (§5)**. The corrected target is a new production Node `TaskExecutor` on the live dispatch path
+(`packages/mosaic` launch + `packages/coord`) that Coord/Forge/live dispatch submit through; the
+Python rail is deleted, not ported.
+
+---
+
+## 1a. ★ KEYSTONE DOGFOOD CASE — an inert gate that erased its own evidence
+
+**A merged commit shipped past `pnpm format:check` — and then the evidence quietly erased itself.**
+
+Verified chain (blob-level, under the repo's own prettier config, at the file's real path):
+
+| commit                                                              | state of `packages/mosaic/framework/tools/orchestrator/README.md`             |
+| ------------------------------------------------------------------- | ----------------------------------------------------------------------------- |
+| `b79336a8` — **merged PR #868**                                     | blob `3ee7f104` — **FAILS** `pnpm format:check`                               |
+| `48fd1df2` — merged PR #872 (unrelated: ci-queue-wait 404 handling) | blob `3d3bb132` — passes; incidentally reformatted by that PR's `lint-staged` |
+| current `origin/main` (`06e0d403`)                                  | passes — **the gate now looks green**                                         |
+
+So: PR #868 merged a file that fails a required gate ⇒ **the CI format gate did not block it.** The
+gate was inert for that merge. Then an unrelated later PR's pre-commit hook reformatted the file as a
+side effect, so `main` went green again **without anyone ever learning the gate had failed to fire.**
+
+> **Correction on record:** my first report to Mos said "format:check is RED on main _now_." That was
+> true of the `main` my checkout was pinned to (`b79336a8`) and is **no longer true of current `main`**,
+> which advanced mid-session. The inert-gate finding itself is unchanged and verified; only its
+> present-tense framing was wrong. The hygiene PR therefore carries the `.prettierignore` fix only —
+> the README needs no fix today.
+
+### Third live instance, same class — the queue guard, hit by this orchestrator
+
+Running the **mandated** pre-push guard during TASK-0:
+
+```
+$ ~/.config/mosaic/tools/git/ci-queue-wait.sh --purpose push
+[ci-queue-wait] platform=gitea purpose=push branch=main sha=06e0d403…
+[ci-queue-wait] state=unknown purpose=push branch=main
+$ echo $?   →  0
+```
+
+**Two distinct defects in one tool**, both feeding RM-03:
+
+1. **Wrong exit** — `state=unknown` ⇒ `exit 0`. The defect at `ci-queue-wait.sh:282-288` that OPUS
+   documented and that PR #1023 is parked on. A required gate returned PASS on an indeterminate result.
+2. **Wrong branch** — it evaluated `branch=main`, not the branch actually being pushed. Even a
+   correctly-exiting guard would have been answering the wrong question.
+
+**Standing doctrine (Mos):** until RM-03 lands, a green from this guard carries **zero information**
+and must not be cited as merge evidence. Rely on reviewer clearance + real CI.
+
+Three independent live instances in a single session — format gate, agent context reset, queue guard —
+is the class confirmed, not anecdote.
+
+### D-8 — a PRE-REGISTERED acceptance check that was not runnable as written
+
+On PR #1025 the author (me) pre-registered AC2 with the fixture snippet `mkdir -p apps/*/venv/lib`.
+In bash, when no `venv` exists the glob is unmatched and passes through literally, creating a
+directory named `apps/*/venv/lib` rather than one per workspace. The check as written did not test
+what it claimed to test.
+
+`rev-974` ran it **exactly as written**, observed the wrong behaviour, then re-ran the intended
+assertion at an explicit path — **and said so in the review** rather than silently substituting a
+working fixture and reporting PASS.
+
+Two things this establishes:
+
+1. **The instruction "do not adjust a check to fit the diff; if it is unrunnable, say so explicitly"
+   worked.** A silent substitution here would have produced a green AC2 that proved nothing, on the
+   exact task whose subject is gates that appear to work. The disclosure is what made the PASS
+   meaningful.
+2. **Pre-registration does not confer correctness.** A pre-registered check is protected from being
+   retrofitted to the implementation; it is not protected from being _wrong when written_. This is a
+   small instance of the mission's own class — an unverified gate — occurring inside the mechanism
+   built to catch unverified gates.
+
+**Requirement on RM-02 (non-negotiable, sharpened by Mos).** The registry must **self-verify** that
+every registered case demonstrably **runs** and demonstrably **fails on a known-bad input**.
+Presence in the registry is **not** evidence. **A check is not trusted until it has been shown to
+fail.** This is mutation testing / negative control applied _at the registry level_ — meaning
+**the conformance harness must itself be conformance-tested.** A registered case that cannot fail, or
+cannot run, is exactly as inert as an unregistered one, and the registry check must detect that
+itself rather than assume it.
+
+**Requirement on RM-55.** The same recursion applies to the harness: it must be observed red before
+its green is worth anything (OPUS R-063 AC1 already states this; D-8 is the empirical case for it).
+
+**Second, equally load-bearing lesson — reviewer disclosure is what makes a review trustworthy.**
+rev-974 could have silently swapped in a working fixture and reported `AC2 PASS`. Nothing in the
+process would have caught it, and the resulting green would have certified nothing — on the very task
+whose subject is gates that only appear to work. The brief's instruction — _"do not adjust a check to
+fit the diff; if it is genuinely unrunnable as specified, say so explicitly and explain why rather
+than silently substituting your own"_ — is therefore not boilerplate. It is the clause that makes a
+PASS mean something, and it must appear in **every** reviewer brief this mission issues.
+
+### D-7 — shared-tmpfs contention → cascading ENOSPC (live incident, 2026-07-31)
+
+The shared 30 G `/tmp` hit **100% ENOSPC** mid-session. It broke tool calls in **two different seats**
+(mine and Mos's) — a single full disk degrades every agent on the host at once. Recurring: prior
+incidents 2026-06-18 and 2026-07-17.
+
+Attribution matters, because the wrong owner cleans the wrong thing. Measured:
+
+| path                                           | size      | last modified                | owner                                             |
+| ---------------------------------------------- | --------- | ---------------------------- | ------------------------------------------------- |
+| `…/-src-mosaic-stack/6d2faee6…` (this session) | **88 K**  | live                         | mos-remediation                                   |
+| `…/-src-mosaic-stack/c743185d…`                | **3.6 G** | **2026-07-22** (9 days dead) | abandoned session, same project path              |
+| `…/claude-1001/pnpm-store`                     | **1.6 G** | **2026-07-23** (8 days dead) | abandoned; the live store is correctly on `$HOME` |
+
+So ~5.2 G — the bulk of the pressure — is **dead session scratch that nothing will ever read again**.
+This is not a quota problem; it is **P-FLEET-001's stale-session GC, applied to disk instead of tmux
+sessions.** The same missing capability (nothing owns reaping dead ephemeral state) produces both the
+orphaned-session failure and this one. Reaping dead-session scratch belongs in RM-50 alongside stale
+tmux-session GC.
+
+**Added to RM-01 as acceptance criteria:** heavy build artifacts (node_modules, package stores, build
+output) must land on the main disk in the worktree, never on the shared 30 G `/tmp`.
+
+**Resolution, and the part that is actually the finding.** Mos verified the attribution independently
+(mtimes, no process or `lsof` holding either path, no live session maps) and reaped both as lead
+coordinator: `/tmp` went to 79%, 6.0 G free. But note _how_ it was resolved — **a human-authority seat
+did it by hand, because the authority exists and the reaper does not.** That gap is the finding, not
+the disk usage.
+
+Two doctrine points fall out, both binding on RM-50:
+
+1. **The fix is not "agents should tidy up."** Asking each seat to clean its own scratch is
+   `instructions are not enforcement` (D-4) wearing a different hat. A deterministic reaper must own
+   it — same conclusion the north star reaches for every other class in this mission.
+2. **Refusing to unilaterally delete another session's scratch was correct, and the resolution is not
+   "be braver about deleting."** An agent guessing that someone else's state is garbage is exactly the
+   unreviewed destructive act the Constitution forbids. The resolution is that _ownership and liveness
+   become mechanically decidable_, so reaping is a determination rather than a judgement call.
+
+**Reaper requirements for RM-50:** liveness determined mechanically (process/`lsof`/session-map, not
+mtime alone); an age threshold; a dry-run that reports what it would reap and why; and an audit event
+per reap. Never a heuristic sweep — that would reintroduce the P-WORKFLOW-001 auto-sync failure in a
+more destructive form.
+
+**The self-erasure is the important part.** An inert gate that is masked by unrelated downstream
+commits produces no lasting artifact, which is precisely why this class survives for months. Detection
+cannot rely on "is `main` currently red" — it must be per-merge-commit.
+
+This matters more than the one-line fix:
+
+- It is the **P-QUEUE-001 / P-CONFORMANCE-001 class** ("gate-6 was inert fleet-wide"), reproduced in
+  the repository this mission is remediating, discovered incidentally.
+- It independently **validates OPUS premise A1** ("every gate is inert until proven otherwise") with
+  live evidence rather than argument — which is why RM-02 is adopted as the keystone (§2, X2).
+- The file fix rides in its own hygiene PR. **The inert gate itself is NOT quiet-patched.** Per Mos:
+  it stays a first-class backlog item, because patching the symptom would destroy the signal.
+
+**Binding requirement on RM-02 and RM-55:** the gate registry and the conformance harness must assert
+**"every merged commit passed every required gate"** — evaluated **per merge commit, against that
+commit's own tree**, not against current `main`. As the table above proves, a "is main green today"
+check would have reported all-clear. A merged-commit-that-fails-a-required-gate is the exact detection
+signal, and it must be a registered must-fail case. A gate that cannot prove it blocked something has
+not been shown to work.
+
+---
+
+## 2. Where they genuinely disagree (not averaged — adjudicated)
+
+| #   | Axis                                        | OPUS                                                       | SOL                                           | My ruling                                                                                                                                                                                                                                                                                                                                                                                                 |
+| --- | ------------------------------------------- | ---------------------------------------------------------- | --------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| X1  | **Total cost**                              | 38 tasks, ~5.3M tok                                        | 25 tasks, ~294K tok                           | **~18× apart.** Not reconcilable by splitting. They measure different things: SOL explicitly excludes orchestration/review/iteration overhead and assumes one remediation pass; OPUS prices the full loop. Adopt **SOL's scope** with **OPUS's rigor**, and treat SOL's G1 as a hard budget checkpoint (§4). Re-estimate empirically after the first three merged PRs rather than trusting either number. |
+| X2  | **Gate registry (OPUS R-002)**              | Keystone; blocks all P2                                    | Absent; only a queue-guard fix                | **ADOPT OPUS.** Empirically validated in this very session: I found `pnpm format:check` red on `main` via merged PR #868 — a required gate that did not block. OPUS's premise A1 ("every gate is inert until proven otherwise") is not theoretical; it reproduced today, unprompted. Scope it tighter than 120K.                                                                                          |
+| X3  | **Drizzle PG first-install defect (R-010)** | Hidden blocker; everything downstream depends on it        | Not mentioned                                 | **ADOPT OPUS.** `packages/db/src/migrate.ts:30-38` carries a TODO admitting postgres-tier first-install fails today. The spine has only ever been proven on PGlite. Every later migration silently depends on this. SOL missed it.                                                                                                                                                                        |
+| X4  | **Rollback artifact for the hard cutover**  | D3: hard cutover needs a rehearsed rollback snapshot       | SOL-07: import-only, explicitly no dual-write | Both obey "no flat-file interim." OPUS wants a one-directional snapshot nothing reads as authority. I read that as compatible with the directive, but it is Jason's call → **DECISION-2** (§5).                                                                                                                                                                                                           |
+| X5  | **Where the queue guard sits**              | P0, independent of spine                                   | SOL-02, also early                            | Agree it is P0. But ownership collides with **parked PR #1023** → **DECISION-3** (§5).                                                                                                                                                                                                                                                                                                                    |
+| X6  | **Report-only rollout**                     | D5: only with a hard expiry, else withdraw                 | not raised                                    | **ADOPT OPUS.** A report-only gate is by definition inert; expiry is the mechanism that stops it becoming the new fail-open.                                                                                                                                                                                                                                                                              |
+| X7  | **Availability trade (FC-7/FC-11)**         | D8: "no DB ⇒ fleet stops" must be pre-committed in writing | not raised                                    | Genuine availability regression, correctly identified. Needs Jason → folded into **DECISION-2**.                                                                                                                                                                                                                                                                                                          |
+
+---
+
+## 3. Reconciled DAG
+
+Phases run in order; `⛔` marks a hard barrier. `src` shows lineage (`O`=opus, `S`=sol, `O+S`=both).
+Estimates are given as a **range** (SOL low / OPUS high) rather than a fabricated midpoint — the
+spread is itself information, and X1 says we calibrate on real merged PRs.
+
+### P0 — Make gates provable, and stop the fleet re-bricking
+
+⛔ _No gate-introducing task in any later phase may merge before RM-02._
+
+| id              | task                                                                                                                                          | src      | depends_on   | est (S/O)        | tier   |
+| --------------- | --------------------------------------------------------------------------------------------------------------------------------------------- | -------- | ------------ | ---------------- | ------ |
+| RM-01           | Reproducible non-root checkout; gate fails on **code, not env**; heavy artifacts OFF shared `/tmp` (banks D-1/D-2/D-5/D-7)                    | O+S+live | —            | 6K / 60K         | codex  |
+| RM-02           | **Gate registry + negative-control CI check** (anti-inert-gate harness) ★keystone                                                             | O        | RM-01        | — / 120K         | opus   |
+| RM-03 ⏸**HOLD** | Queue-guard: **two** defects — (a) `unknown`/`no-status`/malformed ⇒ ≠0, (b) guard evaluates `branch=main` instead of the branch being pushed | O+S+live | RM-02        | 8K / 100K        | sonnet |
+| RM-04           | Activation/version coherence; block launch on skew, fail SAFE; honest `doctor` labels                                                         | O+S      | RM-01        | (in S-01) / 140K | sonnet |
+| RM-05           | Break-glass replaces the three silent `MOSAIC BYPASS` fail-opens                                                                              | O        | RM-04, RM-02 | — / 120K         | opus   |
+
+> ⚠ **RM-05 must not merge before RM-04.** The bypasses exist because the lease-broker daemon was
+> never _deployed_ on this host — removing the fail-open before deployment coherence is real
+> re-creates the 2026-07-22 bricking incident. Hard edge, from OPUS.
+
+### P1 — Durable spine (PG)
+
+⛔ _No migration may merge before RM-10._
+
+| id    | task                                                                                          | src | depends_on | est (S/O)  | tier   |
+| ----- | --------------------------------------------------------------------------------------------- | --- | ---------- | ---------- | ------ |
+| RM-10 | **Fix the Drizzle postgres-tier first-install defect** ★hidden blocker                        | O   | RM-01      | — / 90K    | sonnet |
+| RM-11 | Orchestration spine schema (tasks, attempts, gate_results, hash-chained ledger, typed claims) | O+S | RM-10      | 12K / 160K | opus   |
+| RM-12 | Spine client, fail-closed connection (no silent PGlite in prod)                               | O   | RM-11      | — / 80K    | sonnet |
+| RM-13 | Atomic claims/transitions + transactional outbox + reconciliation sweeper                     | O+S | RM-12      | 12K / 140K | opus   |
+
+### P2 — The single choke point
+
+⛔ _RM-25 (no-second-path) lands in the same milestone as RM-20, or the choke point is optional._
+
+| id    | task                                                                                           | src | depends_on          | est (S/O)        | tier   |
+| ----- | ---------------------------------------------------------------------------------------------- | --- | ------------------- | ---------------- | ------ |
+| RM-20 | Canonical MACP contract completion (Task/Result/Event/Claim/tri-state outcome)                 | S   | —                   | 8K / (in R-020)  | codex  |
+| RM-21 | **Production `TaskExecutor`** backed by `@mosaicstack/macp` ★keystone                          | O+S | RM-12, RM-02, RM-20 | 16K / 220K       | opus   |
+| RM-22 | Gate-runner hardening: `fail_on`, timeouts, **empty gate set = failure**                       | O   | RM-21               | — / 120K         | sonnet |
+| RM-23 | Hash-chained MACPEvent ledger in PG + lifecycle EventType extension                            | O+S | RM-21, RM-11        | — / 160K         | opus   |
+| RM-24 | Seat identity from `MOSAIC_AGENT_NAME` + **mandatory** tri-state write outcomes                | O+S | RM-21               | (in S-03) / 150K | opus   |
+| RM-25 | **No-second-path gate:** terminal status writable only by the executor                         | O   | RM-21, RM-23        | — / 140K         | opus   |
+| RM-26 | `packages/coord` submits through the executor (retire direct spawn)                            | O+S | RM-21               | 16K / 140K       | sonnet |
+| RM-27 | `mosaic yolo/claude/codex/pi` launch path records typed Task + events                          | O   | RM-21, RM-23        | — / 160K         | sonnet |
+| RM-28 | Delete the Forge stub executor (empty-gate-list "success"); Forge submits through the real one | O+S | RM-21               | 10K / 90K        | codex  |
+| RM-29 | One-shot flat-file import + cutover readiness audit (dry-run, idempotent, no dual-write)       | S   | RM-13               | 8K / (in R-062)  | codex  |
+
+> **★ G1 — FIRST DOGFOOD. Stop here and prove it.** One live fleet task travels
+> PG claim → TaskExecutor → worker → gates → terminal PG result/event, with **no** flat-file state.
+> Adopted from SOL wholesale. If G1 cannot carry a real task, **do not build Redis, rotation, comms,
+> or conformance** — remediate instead. This is the budget escape hatch (§4).
+
+### P3 — Rotation lifecycle (finish the Mission Control Plane)
+
+| id    | task                                                                                         | src | depends_on   | est (S/O)        | tier   |
+| ----- | -------------------------------------------------------------------------------------------- | --- | ------------ | ---------------- | ------ |
+| RM-30 | Typed state claims (source/confidence/TTL) with HMAC integrity, fail-closed                  | O+S | RM-11, RM-21 | (in S-03) / 170K | opus   |
+| RM-31 | Contract-hash binding; stale generation loses mutation authority **mechanically**            | O+S | RM-21, RM-30 | 12K / 180K       | opus   |
+| RM-32 | Durable compaction/token sensor (per-runtime thresholds, PreCompact event)                   | O   | RM-23, RM-31 | — / 130K         | sonnet |
+| RM-33 | Typed checkpoint writer (structured claims, never transcript) + digest                       | O+S | RM-30, RM-32 | 12K / 150K       | opus   |
+| RM-34 | **Rotation daemon:** watch → checkpoint → revoke → kill → relaunch → rehydrate               | O+S | RM-33, RM-26 | 16K / 240K       | opus   |
+| RM-35 | Rehydration attestation gate: refuse to act on an incomplete claim set                       | O   | RM-33        | — / 130K         | opus   |
+| RM-36 | Broker-independent recovery; remove silent bypass; honest capability labels                  | S   | RM-34        | 12K / (in R-004) | sonnet |
+| RM-37 | Delete `/compact and continue` from the persistent-seat path (**substitution**, not removal) | O+S | RM-34, RM-44 | (in S-16) / 60K  | codex  |
+
+### P4 — Comms service
+
+⛔ _RM-50 (one roster-owned socket per host) precedes identity-addressed delivery._
+
+| id    | task                                                                         | src | depends_on   | est (S/O)        | tier   |
+| ----- | ---------------------------------------------------------------------------- | --- | ------------ | ---------------- | ------ |
+| RM-40 | `comms/v1` envelope + protocol-version negotiation, LOUD reject              | O+S | RM-11, RM-31 | 8K / 140K        | opus   |
+| RM-41 | Comms service: PG state machine PENDING→RECEIVED→CONSUMED→DEAD-LETTER        | O+S | RM-40, RM-13 | 16K / 200K       | opus   |
+| RM-42 | tmux transport as a **dumb adapter**; durable retry before cursor advance    | O+S | RM-41, RM-50 | (in S-19) / 160K | sonnet |
+| RM-43 | Per-class coalescing + supersede (the stale-consumed-as-live fix)            | O+S | RM-41        | 12K / 130K       | sonnet |
+| RM-44 | Redis Streams hot delivery + provenance guard (**Redis is never authority**) | O+S | RM-41, RM-13 | 12K / 170K       | opus   |
+| RM-45 | Retire direct tmux sends; only the service may write a pane                  | O+S | RM-42, RM-43 | (in S-20) / 100K | codex  |
+
+### P5 — Retirements, hygiene, conformance
+
+| id    | task                                                                                                                                                 | src                   | depends_on                 | est (S/O)        | tier   |
+| ----- | ---------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------- | -------------------------- | ---------------- | ------ |
+| RM-50 | One roster-owned socket/host; quarantine unmanaged; **deterministic reaper for stale sessions AND dead-session disk scratch** (D-7)                  | O+S+live              | RM-04                      | 14K / 150K       | sonnet |
+| RM-51 | Auto-sync **allowlist** (never auto-stage unknown paths) + worktree/lease isolation                                                                  | O+S                   | RM-02                      | 8K / 110K        | sonnet |
+| RM-52 | Retire the Python controller + duplicate MACP islands (3 → 1)                                                                                        | O+S                   | RM-26, RM-27, RM-25, RM-28 | 14K / 110K       | codex  |
+| RM-53 | Flat-file orchestration → DB hard cutover, with rehearsed rollback artifact                                                                          | O+S                   | RM-27, RM-30, RM-34, RM-29 | (in S-10) / 200K | opus   |
+| RM-54 | Fleet-wide inert-gate audit against the RM-02 registry                                                                                               | O                     | RM-02                      | — / 120K         | sonnet |
+| RM-55 | **Conformance harness:** fault-inject the live failure classes on real artifacts                                                                     | O+S                   | RM-35, RM-41, RM-53        | 18K / 260K       | opus   |
+| RM-56 | Retirement proof: CI asserts all three retirements are complete **and stay complete**                                                                | O                     | RM-52, RM-45, RM-53        | — / 90K          | codex  |
+| RM-57 | Operator cutover docs + activation proof; map all 15 decisions to evidence                                                                           | S                     | RM-04, RM-36, RM-45, RM-55 | 6K / —           | codex  |
+| RM-58 | **Mechanical pre-dispatch context reset** — the orchestrator resets a seat out-of-band and verifies it, rather than asking the agent to reset itself | mos-remediation (D-4) | RM-31, RM-50               | 8K               | sonnet |
+
+**Critical path:** `RM-01 → RM-02 → RM-10 → RM-11 → RM-12 → RM-21 → RM-23 → RM-31 → RM-33 → RM-34 → RM-53 → RM-55`.
+
+---
+
+## 4. Execution discipline
+
+- **Every row is one PR.** Author ≠ reviewer; `rev-974` is the mosaicstack reviewer identity.
+- **Pre-registered, diff-blind acceptance checks are committed BEFORE the reviewer reads the diff.**
+  Both decomps wrote their ACs in runnable `⇒0` / `⇒≠0` form specifically to make this possible.
+- **Every gate-introducing task carries at least one registered must-fail negative control.** This is
+  RM-02's whole purpose; a gate with no proven failure path manufactures evidence.
+- **Cost tiers:** codex for mechanical/unambiguous, sonnet for normal feature work, opus reserved for
+  security/integrity/cross-cutting-invariant tasks. SOL priced 0 opus tokens; OPUS priced 14 opus
+  tasks. I am keeping opus only where the failure is _integrity_, not merely complexity.
+- **G1 is the budget checkpoint.** If the first-dogfood slice overruns SOL's estimate by >3×, stop and
+  re-plan rather than spending the remainder. X1 says neither estimate is trustworthy until calibrated.
+- **Defer list adopted from SOL** (10 items): mission dashboard/TUI, PRD-to-board auto-decomposition,
+  heuristic churn scoring, Discord/Slack/Telegram adapters, public MCP comms surface, protocol-v2
+  negotiation, multi-region PG/Redis, event analytics UI.
+
+---
+
+## 5. Decisions — all three ruled by Mos, 2026-07-31
+
+**DECISION-1 — the wire-in point. ✅ RULED: accept the planners (Mos, 2026-07-31).**
+The charter's `mosaic_orchestrator.py::run_single_task` target is the **disabled Python controller
+this mission retires**; wiring the new choke point into the rail we are deleting is wrong.
+
+> **Corrected target (authoritative):** a **new production Node `TaskExecutor`** sitting on the
+> **live dispatch path** — `packages/mosaic` launch + `packages/coord` — which Coord, Forge, and live
+> dispatch all **submit through**. This is the MACP scout's _full_ recommendation ("replace the block
+> **with** a Node executor **and** make Coord/Forge submit through it"), not a resurrection of the
+> Python controller. RM-52 is therefore a **deletion** task, and Build 1's acceptance is measured on a
+> live `mosaic yolo` invocation.
+
+Mos ruled this resolvable from the already-accepted retire-the-Python-rail decision — his authority,
+not a Jason escalation. RM-21/RM-26/RM-27/RM-52 all take the corrected target.
+
+**DECISION-2 — rollback artifact + availability trade. ⏸ JASON-PENDING — NOT BLOCKING.**
+The DB build is phases away, so this is queued for Jason's next session rather than escalated now.
+**Binding requirement in the meantime (Mos, from P-RECOVERY-001):** the DB spine **must NOT be a
+single-point hard-stop.** Design for a broker-independent / degraded mode **plus** a rollback
+artifact. Jason finalises only the specific availability target. This reverses my earlier reading of
+OPUS D8 ("the fallback is: the fleet stops") — that answer is **not** pre-committed; a degraded mode
+is now a design requirement on RM-12, RM-13, RM-23, RM-36 and RM-53.
+
+**DECISION-3 — RM-03 vs. parked PR #1023. ✅ RULED: HOLD RM-03 (Mos, 2026-07-31).**
+Do **not** open a third gate-6 lane — that is the postmortem's own anti-pattern performed by the
+remediation. PR #1023 sits in Jason's **parked delivery stack**; its disposition (close, or supersede
+by RM-03) is Jason's at his next session.
+
+- **PR #1023 → `SUPERSEDED-PENDING-JASON`.** RM-03 stays `HOLD`; when Jason rules, RM-03 proceeds as
+  the single correct lane.
+- **RM-02 and RM-55 proceed independently and are NOT held.** The per-merge-commit gate-assertion
+  requirement is the _conformance_ capability, not the gate-6 fix itself — different scope, no
+  ownership collision.
+
+---
+
+## 6. Status
+
+| phase              | state                                                                                                        |
+| ------------------ | ------------------------------------------------------------------------------------------------------------ |
+| Decomposition      | DONE — both planners delivered independently                                                                 |
+| Reconciliation     | DONE — this document                                                                                         |
+| Blocking decisions | **RULED** — all 3 closed by Mos 2026-07-31 (§5); D-2's availability target is Jason-pending but non-blocking |
+| Dispatch           | **RM-01 IN FLIGHT** — f10-coder (codex), worktree-isolated, AC1–AC8 pre-registered                           |
+| Review             | PR #1025 with rev-974; ACs pre-registered 22:12:26Z before diff exposure                                     |

packages/mosaic/framework/tools/git/mutate-push-guard.sh

@@ -0,0 +1,241 @@
+#!/usr/bin/env bash
+# mutate-push-guard.sh -- regenerate the README's mutation table from MEASUREMENT.
+#
+# WHY THIS EXISTS. The README carried a hand-written mutation table quoting
+# "32/32" style results. Those numbers were true when typed and went stale in
+# silence as the suite grew. A README is what a reader trusts when the tool
+# misbehaves, so a confidently-wrong one is worse than none. Every number the
+# README prints about mutation now comes out of this script.
+#
+# ============================ WHAT THIS TOOL GOT WRONG ========================
+# Three defects, all found by review, all of the same shape: A TOOL WHOSE ENTIRE
+# OUTPUT IS A COVERAGE CLAIM MUST BE HARDER TO FOOL THAN THE CODE IT MEASURES.
+#
+#  1. IT REPORTED FULL COVERAGE ON A RED BASELINE. A mutant was "killed" whenever
+#     the suite reported any failure at all, and the baseline was run only at the
+#     END and never required to be green. So ONE pre-existing suite failure --
+#     changing no guard behaviour whatsoever -- satisfied EVERY mutant: 13 killed,
+#     0 survived, a confident table generated and pasted into the README, exit 0.
+#     Now: the baseline runs FIRST and must be exit-0 with zero failures, and a
+#     kill requires the mutant to break a case THE BASELINE PASSED, recorded BY
+#     NAME. A tally is not evidence; a named delta is.
+#
+#  2. IT MUTATED THE REVIEWED SOURCE IN PLACE. Restoration leaned on an EXIT trap.
+#     A TRAP IS CLEANUP, NOT ISOLATION -- SIGKILL cannot run it. An interrupted run
+#     left push-guard.sh mutated in the working tree, and the reviewer's NEXT
+#     suite run silently inherited it. A verification tool that alters its subject
+#     can leave the subject wrong in a way the next measurement believes.
+#     Now: the subject is copied into a temp dir and only the COPY is ever
+#     written to. The source is untouched BY CONSTRUCTION rather than by cleanup,
+#     which is the only version of this that survives kill -9.
+#
+#  3. ITS WORK DIR WAS SHARED. Concurrent runs interfered through the suite's
+#     default .work directory. Each run now gets its own.
+#
+# (Note the deliberate asymmetry with verify-clean-clone.sh, which forbids cp:
+# there the copy LAUNDERED the property under measurement, so measuring a copy
+# was the defect. Here mutation is destructive by design, so copying is what
+# PROTECTS the subject. The rule is not "never copy" -- it is "know whether the
+# copy preserves the property you are about to measure.")
+#
+# ================== THREE WAYS A MUTATION RUN LIES, AND THE GUARD FOR EACH ====
+#  A. THE ANCHOR NO LONGER MATCHES. The mutant is never applied, the suite is
+#     green, and the report says SURVIVED -- the same word a real coverage gap
+#     gets. Guarded: ANCHOR MISSING is a loud failure.
+#  B. THE ANCHOR MATCHES PROSE. This one landed on the first run: a mutant aimed
+#     at a branch matched inside the usage() heredoc, edited a help string,
+#     changed no behaviour, and duly reported SURVIVED. A documentation edit was
+#     one step from being recorded as an uncovered branch. A MUTATION THAT CANNOT
+#     CHANGE BEHAVIOUR IS NOT A SURVIVING MUTANT, IT IS A NON-MEASUREMENT.
+#     Guarded: anchors resolving inside usage() are refused.
+#  C. THE ANCHOR IS AMBIGUOUS. Two unrelated branches here are both the line
+#     `if (( status != 0 )); then`; a first-match replace would credit the kill
+#     to the wrong branch. Guarded: a match count != 1 refuses rather than guesses.
+set -uo pipefail
+
+SRC_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+while (( $# )); do
+    case "$1" in
+        # --dir exists so this tool can be pointed at a FIXTURE copy and tested.
+        --dir) SRC_DIR="$(cd "$2" && pwd)"; shift 2 ;;
+        *) printf 'usage error: unknown argument: %s\n' "$1" >&2; exit 64 ;;
+    esac
+done
+
+SRC_TARGET="$SRC_DIR/push-guard.sh"
+SRC_SUITE="$SRC_DIR/test-push-guard.sh"
+for f in "$SRC_TARGET" "$SRC_SUITE"; do
+    [[ -r "$f" ]] || { printf 'REFUSING: cannot read %s\n' "$f" >&2; exit 1; }
+done
+
+# --- ISOLATION, NOT CLEANUP --------------------------------------------------
+# Everything below writes only inside WORK. The trap is a courtesy for disk
+# space; correctness does not depend on it running.
+WORK="$(mktemp -d)"
+trap 'rm -rf "$WORK"' EXIT
+install -m 755 "$SRC_TARGET" "$WORK/push-guard.sh"
+install -m 755 "$SRC_SUITE"  "$WORK/test-push-guard.sh"
+TARGET="$WORK/push-guard.sh"
+SUITE="$WORK/test-push-guard.sh"
+BAK="$WORK/push-guard.sh.orig"
+cp "$TARGET" "$BAK"
+# Per-run work dir: the suite otherwise defaults to a shared .work beside itself,
+# and two concurrent runs corrupt each other's fixtures.
+export MOSAIC_TEST_WORK_DIR="$WORK/.work"
+
+# --- where the prose lives: usage() { ... EOF ---------------------------------
+PROSE_LO="$(grep -n '^usage() {' "$BAK" | head -1 | cut -d: -f1)"
+PROSE_HI="$(awk -v lo="$PROSE_LO" 'NR > lo && /^EOF$/ { print NR; exit }' "$BAK")"
+if [[ -z "$PROSE_LO" || -z "$PROSE_HI" ]]; then
+    echo "!! cannot locate the usage() heredoc -- the prose guard would be inert; refusing" >&2
+    exit 1
+fi
+
+# passing_cases <output>  -- names of cases that PASSED, one per line
+passing_cases() { printf '%s\n' "$1" | sed -n 's/^  PASS  \[[^]]*\] \(.*\) (exit [0-9]*)$/\1/p'; }
+tally()         { printf '%s\n' "$1" | grep -E 'needles: [0-9]+ passed' | tail -1; }
+
+# --- THE BASELINE MUST BE GREEN, AND IT IS ESTABLISHED FIRST ------------------
+printf '=== baseline (must be exit 0 with zero failures) ===\n'
+BASE_OUT="$("$SUITE" 2>&1)"; BASE_RC=$?
+BASE_LINE="$(tally "$BASE_OUT")"
+BASE_FAILED="$(printf '%s\n' "$BASE_LINE" | sed -n 's/.*, \([0-9]*\) failed.*/\1/p')"
+if (( BASE_RC != 0 )) || [[ -z "$BASE_LINE" || "$BASE_FAILED" != "0" ]]; then
+    printf 'REFUSING: baseline is not green -- exit %s, tally: %s\n' \
+        "$BASE_RC" "${BASE_LINE:-<no tally emitted>}" >&2
+    printf '\nEvery mutant would be scored KILLED by the pre-existing failure, and this\n' >&2
+    printf 'tool would publish a confident coverage table that measured nothing. Fix the\n' >&2
+    printf 'suite first. NO TABLE IS EMITTED.\n' >&2
+    exit 1
+fi
+printf '  %s\n' "$BASE_LINE"
+mapfile -t BASE_PASSING < <(passing_cases "$BASE_OUT")
+printf '  %d named cases passing at baseline\n' "${#BASE_PASSING[@]}"
+if (( ${#BASE_PASSING[@]} == 0 )); then
+    printf 'REFUSING: could not parse any case names -- kills could not be attributed.\n' >&2
+    exit 1
+fi
+printf '  prose (usage heredoc) is lines %s-%s -- anchors there are refused, not scored\n\n' \
+    "$PROSE_LO" "$PROSE_HI"
+
+rc_all=0
+KILLED=0; SURVIVED=0
+declare -a ROWS=()
+
+mutate() {
+    local name="$1" find="$2" repl="$3"
+    # Count and locate in python so MULTI-LINE anchors work. They are required:
+    # two unrelated branches in this file are both the single line
+    # `if (( status != 0 )); then`, and a one-line anchor cannot say which one a
+    # result belongs to. Guessing would attribute a kill to the wrong branch.
+    local loc; loc="$(python3 - "$BAK" "$find" <<'LOCPY'
+import sys
+s = open(sys.argv[1]).read(); find = sys.argv[2]
+n = s.count(find)
+print(n, (s[:s.index(find)].count("\n") + 1) if n else 0)
+LOCPY
+)"
+    local n="${loc%% *}" ln="${loc##* }"
+    if (( n == 0 )); then
+        printf '  !! ANCHOR MISSING   %-46s NOT APPLIED -- result would be meaningless\n' "$name"
+        rc_all=1; return
+    fi
+    if (( n != 1 )); then
+        printf '  !! ANCHOR AMBIGUOUS %-46s %d matches -- refusing to guess which branch\n' "$name" "$n"
+        rc_all=1; return
+    fi
+    if (( ln >= PROSE_LO && ln <= PROSE_HI )); then
+        printf '  !! ANCHOR IS PROSE  %-46s line %d is inside usage() -- not a branch\n' "$name" "$ln"
+        rc_all=1; return
+    fi
+
+    python3 - "$BAK" "$TARGET" "$find" "$repl" <<'MUTPY'
+import sys
+src, dst, find, repl = sys.argv[1:5]
+open(dst, "w").write(open(src).read().replace(find, repl, 1))
+MUTPY
+    local out; out="$("$SUITE" 2>&1)"
+    cp "$BAK" "$TARGET"
+
+    local line; line="$(tally "$out")"
+    if [[ -z "$line" ]]; then
+        printf '  !! NO TALLY        %-46s suite produced no needle count\n' "$name"
+        rc_all=1; return
+    fi
+    # A KILL IS A NAMED DELTA, NOT A TALLY. Cases that passed at baseline and no
+    # longer pass are the evidence; anything else (a case that was already
+    # failing, a suite that died early) cannot be credited to this mutant.
+    local now; now="$(passing_cases "$out")"
+    local -a broke=()
+    local c
+    for c in "${BASE_PASSING[@]}"; do
+        grep -qxF -- "$c" <<<"$now" || broke+=("$c")
+    done
+    local total="${#BASE_PASSING[@]}"
+
+    if (( ${#broke[@]} > 0 )); then
+        printf '  KILLED   L%-5s %-46s %d/%d fail\n' "$ln" "$name" "${#broke[@]}" "$total"
+        printf '             by: %s\n' "${broke[0]}"
+        (( ${#broke[@]} > 1 )) && printf '             +%d more\n' "$(( ${#broke[@]} - 1 ))"
+        ROWS+=("| \`$name\` (L$ln) | ${#broke[@]}/$total fail | killed |")
+        KILLED=$(( KILLED + 1 ))
+    else
+        printf '  SURVIVED L%-5s %-46s 0/%d fail  <-- UNCOVERED BRANCH\n' "$ln" "$name" "$total"
+        ROWS+=("| \`$name\` (L$ln) | 0/$total fail | **SURVIVED** |")
+        SURVIVED=$(( SURVIVED + 1 )); rc_all=1
+    fi
+}
+
+echo "=== push-guard mutation run ==="
+# EVERY ANCHOR BELOW IS VERBATIM SOURCE TEXT OF THE GUARD, so the single quotes
+# are load-bearing: these strings must reach `mutate` as the CHARACTERS that
+# appear in push-guard.sh. Expanding them would search for THIS shell's (unset)
+# $rel, $cmode, $EX_CONFIG and match nothing -- which the anchor guards would
+# report as ANCHOR MISSING rather than silently, but the intent is still to
+# forbid expansion. The directive is scoped to this function so it cannot mask a
+# genuine unintended-literal anywhere else in the file.
+# shellcheck disable=SC2016
+run_mutants() {
+    mutate "json decision requirement bypassed" \
+        '    if (( ${#JSON_PATHS[@]} == 0 )); then' '    if false; then'
+    mutate "opt-out accepted with no written reason" \
+        'if not isinstance(reason, str) or not reason.strip():' 'if False:'
+    mutate "committed re-read of the opt-out skipped" \
+        '    [[ "$CFG_MODE" == "none" ]] || return 0' '    return 0'
+    mutate "untracked config honoured as an opt-out" \
+        '    if [[ -z "$rel" ]]; then' '    if false; then'
+    mutate "staged-but-uncommitted opt-out honoured" \
+        '    if [[ -z "$cmode" ]]; then' '    if false; then'
+    mutate "committed SYMLINK config honoured" \
+        '    if [[ "$cmode" == "120000" ]]; then' '    if false; then'
+    mutate "unparseable committed config ignored" \
+        '    if (( cstatus != 0 )); then' '    if false; then'
+    mutate "local-only opt-out (HEAD says ON) honoured" \
+        '    if [[ "$cmode_val" != "none" ]]; then' '    if false; then'
+    mutate "empty MERGE exempted" \
+        '        if [[ "$all_same" == yes ]]; then' '        if false; then'
+    mutate "empty ROOT exempted" \
+        'if [[ -z "$(git diff-tree --root -r --name-only --no-commit-id HEAD)" ]]; then' \
+        'if false; then'
+    mutate "--since-head ancestry check removed" \
+        'if ! git merge-base --is-ancestor "$since_head" "$head"; then' 'if false; then'
+    # guard's own source text, matched verbatim. Expanding them here would search for
+    # this shell's (empty) $EX_CONFIG instead of the characters in the file.
+    mutate "staged-file enumeration ignores git failure" \
+        "$(printf 'if (( status != 0 )); then\n        local msg')" \
+        "$(printf 'if false; then\n        local msg')"
+    mutate "malformed config degrades to absent instead of refusing" \
+        "$(printf 'if (( status != 0 )); then\n        fail "$EX_CONFIG"')" \
+        "$(printf 'if false; then\n        fail "$EX_CONFIG"')"
+}
+
+run_mutants
+
+printf '\nbaseline: %s\n' "$BASE_LINE"
+printf '%d killed, %d survived\n' "$KILLED" "$SURVIVED"
+
+printf '\n--- README TABLE (paste verbatim) ---\n'
+printf '| mutation | suite result | verdict |\n|---|---|---|\n'
+printf '| *unmodified* | %s | baseline |\n' "$(printf '%s' "$BASE_LINE" | sed 's/push-guard needles: //')"
+printf '%s\n' "${ROWS[@]}"
+exit "$rc_all"

packages/mosaic/framework/tools/git/pr-review.sh

@@ -109,6 +109,55 @@ else
     detect_platform >/dev/null
 fi
 
+# Render the provider's own explanation for a failed request, for appending to
+# an error message (#1004). Every HTTP arm in this file already has the response
+# body on disk; without this it was discarded unread at exactly the moment the
+# caller needed it, which pushes an operator toward re-issuing the request by
+# hand to find out what the server said. Gitea returns {"message": "..."} on a
+# refusal; anything unparseable falls back to a truncated raw first line so a
+# proxy's HTML error page still says something. Prints "" when there is nothing
+# to add, so callers can interpolate unconditionally.
+#
+# Args: $1 = path to the response body file.
+gitea_error_detail() {
+    local body_file="$1"
+    [[ -s "$body_file" ]] || return 0
+    python3 - "$body_file" <<'PY' 2>/dev/null || true
+import json
+import sys
+
+LIMIT = 300
+try:
+    with open(sys.argv[1], encoding="utf-8", errors="replace") as response:
+        raw = response.read().strip()
+except OSError:
+    raise SystemExit(0)
+if not raw:
+    raise SystemExit(0)
+detail = ""
+try:
+    parsed = json.loads(raw)
+    if isinstance(parsed, dict):
+        for key in ("message", "error", "errors"):
+            value = parsed.get(key)
+            if isinstance(value, str) and value.strip():
+                detail = value.strip()
+                break
+            if isinstance(value, list) and value:
+                detail = "; ".join(str(item) for item in value).strip()
+                break
+except ValueError:
+    pass
+if not detail:
+    detail = raw.splitlines()[0].strip()
+if not detail:
+    raise SystemExit(0)
+if len(detail) > LIMIT:
+    detail = detail[:LIMIT] + "..."
+print(f" — provider said: {detail}")
+PY
+}
+
 # Post a comment to a Gitea PR (PR comments ARE issue comments) via the
 # supported REST API and verify it against a PROVIDER-RETURNED created id. The
 # write is a direct POST that returns the created comment object, so we learn
@@ -150,7 +199,7 @@ print(json.dumps({"body": os.environ["COMMENT_BODY"]}))
         return 1
     fi
     if [[ "$write_status" != "201" ]]; then
-        echo "Error: Gitea comment write failed with HTTP $write_status" >&2
+        echo "Error: Gitea comment write failed with HTTP $write_status$(gitea_error_detail "$write_file")" >&2
         return 1
     fi
 
@@ -179,7 +228,7 @@ PY
         return 1
     fi
     if [[ "$readback_status" != "200" ]]; then
-        echo "Error: Gitea comment read-back failed with HTTP $readback_status" >&2
+        echo "Error: Gitea comment read-back failed with HTTP $readback_status$(gitea_error_detail "$readback_file")" >&2
         return 1
     fi
 
@@ -370,7 +419,7 @@ gitea_authenticated_login() {
         return 1
     fi
     if [[ "$status" != "200" ]]; then
-        echo "Error: Gitea authenticated-identity read failed with HTTP $status" >&2
+        echo "Error: Gitea authenticated-identity read failed with HTTP $status$(gitea_error_detail "$response_file")" >&2
         return 1
     fi
 
@@ -407,7 +456,7 @@ gitea_read_pr_head_into() {
         return 1
     fi
     if [[ "$status" != "200" ]]; then
-        echo "Error: Gitea PR head read failed with HTTP $status" >&2
+        echo "Error: Gitea PR head read failed with HTTP $status$(gitea_error_detail "$pr_file")" >&2
         return 1
     fi
     python3 - "$pr_file" <<'PY'
@@ -497,7 +546,7 @@ print(json.dumps({
     fi
     # Gitea returns 200 (occasionally 201) with the created review object.
     if [[ "$write_status" != "200" && "$write_status" != "201" ]]; then
-        echo "Error: Gitea review submit failed with HTTP $write_status (#865: no durable review created)" >&2
+        echo "Error: Gitea review submit failed with HTTP $write_status$(gitea_error_detail "$write_file")" >&2
         return 1
     fi
 
@@ -526,7 +575,7 @@ PY
         return 1
     fi
     if [[ "$readback_status" != "200" ]]; then
-        echo "Error: Gitea review read-back failed with HTTP $readback_status" >&2
+        echo "Error: Gitea review read-back failed with HTTP $readback_status$(gitea_error_detail "$readback_file")" >&2
         return 1
     fi
 

packages/mosaic/framework/tools/git/push-guard.README.md

@@ -0,0 +1,204 @@
+# push-guard
+
+Mechanical closure of one defect: **a verification that passes when the thing it verifies never happened.**
+
+Three incidents in one evening, three agents, no coordination, same shape:
+
+| #   | Incident                                                          | Why the check passed                                                |
+| --- | ----------------------------------------------------------------- | ------------------------------------------------------------------- |
+| 1   | `PUSH VERIFIED` reported after nothing was pushed                 | Commit had aborted, so local HEAD trivially equalled the remote ref |
+| 2   | An **empty commit** carrying another commit's message was pushed  | A push was chained after a _failed_ commit and ran on stale state   |
+| 3   | Conflict markers + invalid JSON committed into 70 generated files | Nothing asserted the generated output still parsed                  |
+
+Each is an assertion satisfied by the null case. `push-guard.sh` asserts the **positive** fact instead: a new object exists, the remote _moved_, the content _parses_.
+
+## Checks
+
+| Sub-command    | Asserts                                      | Exit on failure |
+| -------------- | -------------------------------------------- | --------------- |
+| `check-staged` | index has no unmerged paths                  | `2`             |
+|                | no conflict markers in staged content        | `2`             |
+|                | the conflict scan actually _completed_       | `2`             |
+|                | staged JSON under the nominated paths parses | `3`             |
+|                | **something is actually staged**             | `5`             |
+|                | **an explicit JSON decision exists**         | `6`             |
+| `push`         | HEAD advanced past `--since-head`            | `5`             |
+|                | HEAD is a non-empty commit                   | `5`             |
+|                | remote **moved**, and now equals local HEAD  | `4`             |
+
+## Usage
+
+```bash
+push-guard.sh check-staged --json-path 'data/**/*.json'
+
+BEFORE=$(git rev-parse HEAD)
+git commit -m "..."
+push-guard.sh push --remote origin --branch main --since-head "$BEFORE"
+```
+
+`--since-head` is what distinguishes "committed nothing" from "committed something", and capturing the remote ref _before_ pushing is what makes `remote == local` mean anything. Both were missing from the guard that produced incident 1.
+
+## Design decisions that measurement forced
+
+These are the interesting part; each one was wrong in the first draft.
+
+**A bare `=======` is deliberately NOT treated as a conflict marker.** It collides with reStructuredText underlines and ASCII rules. Every genuine conflict git writes also contains `<<<<<<<` and `>>>>>>>`, so requiring those loses no real detection. Measured against a real repository: **zero** false positives across the entire tracked tree.
+
+**The JSON check is opt-in by path, not on-by-default.** The first draft checked every staged `*.json`, on the reasoning that broader is strictly stronger. Measured against the same repository: **17 of 119** tracked `.json` files fail a strict parse, _all legitimately_ — every `tsconfig*.json` is JSONC (comments are legal there) and the CA templates are Go templates that merely carry a `.json` suffix. An on-by-default check fires on ~14% of the repo's JSON, and a guard that cries wolf gets routed around until the bypass is habitual — at which point the bypass covers the true positives too. Broader was **weaker**.
+
+**`--json-path` values are normalized to `:(glob)` magic.** Git's default pathspec matching makes `data/**/*.json` require at least one intermediate directory: it matches `data/sub/b.json` and _silently skips_ `data/a.json`. The obvious spelling would have delivered partial coverage with no warning.
+
+## Found by independent review, after the needles were already green
+
+An adversarial review (author ≠ reviewer) found two genuine fail-opens that 17 self-written needles, five mutation runs and a repo-wide false-positive measurement had all missed. Both were reproduced before being fixed, and both now have needles.
+
+**Renamed files were invisible to every content check.** Git detects renames by default (`diff.renames=true` since 2.9), so `git mv` plus a small edit is reported as a single `R` entry — which `--diff-filter=ACM` does not match. Reproduced at 97% similarity: the guard printed `staged content OK` and exited 0 with conflict markers in the staged blob. Fixed with `--no-renames`.
+
+There is a trap inside this one worth recording. With _only_ the renamed file staged, the guard exits 5 — the nothing-staged check fires because the file list came back empty. That looks like a catch and is pure accident; co-stage one ordinary file and the fail-open is total. The needle deliberately co-stages a clean file so it cannot pass for the wrong reason.
+
+**`-I` skipped files marked binary in `.gitattributes`,** while the summary still counted them as scanned — a clean pass _and_ a false count. Fixed with `-a`.
+
+The review also correctly identified one **vacuous control**: the positive `--since-head` case asserted only exit 0, which the push produces anyway, so deleting the entire `--since-head` block left it passing. It now asserts on output.
+
+Two reported findings did **not** reproduce and were not acted on: `:(glob)` does still match a bare directory pathspec, and my first rename repro failed only because the edit dropped similarity below the detection threshold — a badly built test, not an absent bug. Re-testing properly is what confirmed it.
+
+## The JSON decision is mandatory (`.push-guard.json`)
+
+The first release announced `JSON check NOT REQUESTED` and continued. That was _visible_ rather than silent, which is better — but it is still an **absence**, and an absence is not reviewable. Nobody reads a line that has printed correctly ten thousand times. A repo that needed the check and never wired it up stayed unprotected forever, and nothing ever failed.
+
+The decision is now required, from one of exactly two places:
+
+```jsonc
+// nominate generated JSON for parse-checking
+{"json_paths": ["data/**/*.json"], "allow_invalid_json": ["fixtures/*"]}
+
+// or opt out — the reason is REQUIRED and is printed on every run
+{"json_check": "none", "reason": "no generated JSON in this repo"}
+```
+
+`--json-path` on the command line also satisfies it. Saying nothing is refused (exit `6`).
+
+**The asymmetry is deliberate.** Turning the check _on_ is safe from anywhere, so a CLI flag suffices. Turning it _off_ is confined to a committed file, because that is the only form a human can review: you can read a reason in a diff, and you cannot review the fact that nobody typed a flag. An opt-out living in an ad-hoc command line is the old fail-open with extra steps.
+
+A **malformed** config is refused outright rather than treated as absent — that fallback would mean a typo silently disables the check the file was written to enable. A config that parses but _states nothing_ (`{}`) is refused too: valid JSON that says nothing is the original defect wearing a config file as a disguise.
+
+**Migration is a hard cutover, on purpose.** The tempting path is "warn for one release, then enforce" — but that warning phase _is_ the degrade-to-a-warning this tool forbids, and it leaves the fail-open open for exactly as long as the warning is ignored, which is indefinitely. Consumers add a config or the guard refuses. It breaks loudly, once. Two pre-existing cases in this repo's own harness were the first to pay that cost, which is the correct place to feel it.
+
+## Known limitations — stated, not hidden
+
+- `check-staged` inspects the index. Content added to the working tree _after_ it runs is not covered — it belongs in a `pre-commit` hook, where the window is smallest.
+- `push` hardcodes `HEAD:refs/heads/$branch`, so it cannot verify a commit built via plumbing on a different base. A `--sha` option would close this; it is deliberately not added without a needle.
+
+## Test harness
+
+`test-push-guard.sh` — 46 cases, each check in **both polarities**:
+
+- **NEEDLE** — a deliberately broken fixture that must trip the guard.
+- **CONTROL** — a clean fixture that must pass.
+
+Controls are not decoration. A guard that failed unconditionally would satisfy every needle and look fully covered. Several controls additionally assert on the guard's _output_ (`--out`), because exit 0 cannot distinguish "checked the files and they were fine" from "matched no files and had nothing to check" — two controls in an earlier revision were passing vacuously for exactly that reason.
+
+### Mutation results — the harness was itself tested by breaking the guard
+
+**Everything in this section is regenerated by `./mutate-push-guard.sh`, not typed.** The previous version of this table was hand-maintained: it was true when written, went stale as the suite grew, and ended up asserting `unmodified | 32/32 pass` against a 46-case suite. A README is what a reader consults when the tool misbehaves, so a confidently-wrong one is worse than none. Re-run the script and paste; do not edit the numbers.
+
+| mutation                                                         | suite result        | verdict  |
+| ---------------------------------------------------------------- | ------------------- | -------- |
+| _unmodified_                                                     | 46 passed, 0 failed | baseline |
+| `json decision requirement bypassed` (L482)                      | 3/43 fail           | killed   |
+| `opt-out accepted with no written reason` (L334)                 | 1/43 fail           | killed   |
+| `committed re-read of the opt-out skipped` (L405)                | 5/43 fail           | killed   |
+| `untracked config honoured as an opt-out` (L409)                 | 1/43 fail           | killed   |
+| `staged-but-uncommitted opt-out honoured` (L425)                 | 1/43 fail           | killed   |
+| `committed SYMLINK config honoured` (L433)                       | 1/43 fail           | killed   |
+| `unparseable committed config ignored` (L444)                    | 1/43 fail           | killed   |
+| `local-only opt-out (HEAD says ON) honoured` (L459)              | 1/43 fail           | killed   |
+| `empty MERGE exempted` (L704)                                    | 1/43 fail           | killed   |
+| `empty ROOT exempted` (L715)                                     | 1/43 fail           | killed   |
+| `--since-head ancestry check removed` (L665)                     | 1/43 fail           | killed   |
+| `staged-file enumeration ignores git failure` (L173)             | 1/43 fail           | killed   |
+| `malformed config degrades to absent instead of refusing` (L375) | 4/43 fail           | killed   |
+
+13 mutants, 0 survived.
+
+**Why the denominator is 43 while the suite reports 46.** The generator attributes kills only to cases it can parse by name, which is the `PASS [KIND] <name> (exit N)` form. Of the 46 passing assertions, 45 print `PASS` and 43 of those match that form. The three excluded lines are:
+
+```
+  PASS  [CONTROL] guard runs without emitting any interpreter warning
+  PASS  [NEEDLE ] the warning detector fires on a known warning string
+  ok    [e9-fixture    ] fixture is a merge (3 fields) with tree identical to both parents
+```
+
+The two `z1` warning assertions assert on a whole _class_ of output rather than an exit code, so they carry no `(exit N)`; `e9-fixture` is a fixture precondition and prints in the `ok` form. All three still run and still gate the suite — they are excluded from _attribution_, not from _execution_.
+
+An earlier revision of this paragraph named the excluded set as `w2-fixture`, `e9-fixture` and `g1-fixture`. **That was written from memory instead of from the output, and two of the three names were wrong:** `w2-fixture` belongs to `test-verify-clean-clone.sh` and `g1-fixture` to `test-mutate-push-guard.sh`, so neither runs in this suite at all and neither could contribute to its tally. A reader auditing the denominator would have gone looking for them in the wrong files. It is recorded rather than quietly corrected because a confidently-wrong provenance inside the section that exists to make a generated number auditable is the same defect as everything else on this page: **a claim that reads as measured and is not.** The set above was produced by running the suite and applying the generator's own parser to its output.
+
+Earlier mutants, run at the suite size of the day and kept as history rather than as a live claim: fail-open (9/16), always-fail (16/16 — controls catch it), revert `:(glob)` normalization (3/16, caught **only** by the `--out` assertions), drop the remote-did-not-move assertion (1/16), restore blanket `|| true` on the scan (1/17), revert `--no-renames` (1/19), revert `-a` to `-I` (1/19), delete the `--since-head` block (2/19, incl. the control that _was_ vacuous), stray-warning emission (1/32).
+
+A guard nobody has watched fail is not a guard. The same applies to the harness: the `:(glob)` mutant would have passed silently without the output assertions, so the assertions are load-bearing rather than ornamental.
+
+### Two branches were uncovered, and writing this table is what found them
+
+Building the generator turned up two mutants that survived a **46-case suite reporting 46/46 green**: `staged-but-uncommitted opt-out honoured` and `unparseable committed config ignored`. Neither branch had any case at all. Both are now needled, which is why they read _killed_ above.
+
+Both survivors share a shape worth naming: the mutant still exits `6`, because control falls through to a _sibling_ refusal that rejects for a different reason. **An exit-code-only assertion would have been satisfied by the wrong branch.** The new cases anchor on the distinguishing clause instead.
+
+The same audit found a live instance of that defect already in the suite. Three separate branches print the headline `OPT-OUT IS NOT REVIEWABLE` — untracked, staged-not-committed, and symlink — and the untracked needle was anchored on the shared headline. Delete the untracked branch and control reaches a sibling printing those same words, so **the needle would not fail; it would re-point.** A substring anchor does not fail when its subject is removed. It is now anchored on `is not tracked in git`.
+
+### The generator refuses three ways a mutation run can lie
+
+1. **The anchor no longer matches.** The mutant is never applied, the suite is green, and a naive report says _survived_ — the same word a real coverage gap gets. `ANCHOR MISSING` is a loud failure instead.
+2. **The anchor matches prose.** This one landed on the first run: a mutant aimed at the refuse-on-missing-config branch matched inside the `usage()` heredoc, edited a help string, changed no behaviour, and duly reported _survived_. A documentation edit was one step from being recorded as an uncovered branch. **A mutation that cannot change behaviour is not a surviving mutant, it is a non-measurement** — and a non-measurement reported as a result is the same defect as the vacuous test the harness exists to hunt. Anchors resolving inside `usage()` are now refused, and the heredoc's bounds are located at runtime rather than hardcoded.
+3. **The anchor is ambiguous.** Two unrelated branches here are both the single line `if (( status != 0 )); then`; a first-match replace would silently attribute the kill to whichever came first. Multi-line anchors are supported and a match count `!= 1` refuses rather than guesses.
+
+**A blanket `|| true` on the scan was a fail-open in the guard's own error handling.** `git grep` exits `1` for "no match" but `>=2` for a real failure. `|| true` collapsed the two, so a malformed pathspec or unreadable index would have been reported as "ok, no conflict markers" — a clean pass from a scan that never ran. The status is now discriminated, and a PATH-shim fault-injection needle proves the refusal.
+
+**A `<<'PY'` heredoc inside `$( )` made bash print a warning on every run — and 30 needles plus a clean linter all missed it.** The config parser started life as an inline heredoc inside a command substitution, so every invocation emitted `warning: command substitution: 1 unterminated here-document` to stderr. It executed correctly, every needle stayed green, and shellcheck reported nothing. The harness missed it because `expect` asserts _substrings it was told to look for_ — and nobody tells you to look for output you did not know existed. It surfaced only when the guard was run against a real repository.
+
+The fix moves the parser to a top-level constant. The lesson is encoded as case `z1`, which asserts the **absence of a whole output class** rather than the presence of an expected string, and is paired with a needle proving the detector can fire. A tool built to refuse quiet failures was quietly polluting stderr for its entire existence.
+
+**The `-E` flag on `git grep` is load-bearing and was caught by a needle, not by review.** `git grep` defaults to _basic_ regex, in which `(`, `|` and `{7}` are literal characters. Without `-E` the patterns match nothing and the check reports a clean pass over a file full of conflict markers — the exact defect this tool exists to prevent, shipped inside the tool itself.
+
+### Then the review turned on the harness, and found three more
+
+A second independent review ran everything from a fresh clone and reproduced three defects — **all of them in the tools written to prevent defects.** None was in `push-guard.sh`.
+
+**1. The clean-clone verifier could not verify the tree that ships it.** `verify-clean-clone.sh` resolved the repository top level correctly but then passed **bare basenames** to `git ls-tree`, which is a root-relative pathspec. These files really live at `packages/mosaic/framework/tools/git/`, so in place every artifact came back `NOT TRACKED at HEAD` and the verifier exited 1 without ever running. The tool built to stop packaging false-greens was unusable against its own packaging.
+
+Its suite could not see it, because **every fixture installed the artifacts at the fixture repository root.** 6/6 green proved flat-layout operation and said nothing about the deployed path. That is the third time on this tool that a control validated a _model_ instead of the _subject_: v1 of the verifier measured a `cp`'d scratch repo, and then v2's own tests measured a layout that does not exist. **A fixture is a claim about the world; an untested fixture is an unreviewed one.** The committed prefix now comes from `git rev-parse --show-prefix` and is threaded through `ls-tree`, the cloned `stat`, and the suite's working directory; `w6-nested` builds the real nested layout, `w6-prefix` asserts the verifier _reports_ that prefix (so a green `w6` cannot mean the prefix was harmlessly ignored), and `w7-nested-mode` proves the mode needle still bites down there.
+
+**2. Any pre-existing suite failure satisfied every mutant.** The generator called a mutant `KILLED` whenever `failed > 0`, and never required a green baseline. Inject one always-failing case that changes no guard behaviour whatsoever and the run reports _13 killed, 0 survived_, emits the table above, and exits 0. **A tally is not evidence; a named delta is.** The generator now refuses outright unless the unmodified baseline is exit-0 with zero failures — and emits no table when it refuses — then scores each mutant by the _named cases_ that stopped passing, printing the first one (`by: <case>`) beside every kill.
+
+**3. An interrupted run stranded a mutated `push-guard.sh` in the reviewed tree.** Restoration leaned on an `EXIT` trap. **A trap is cleanup, not isolation, and SIGKILL cannot run it.** It happened to the reviewer twice and contaminated the following suite run until the clone was discarded. Isolation is now by construction: the guard and suite are `install`ed into a temp dir and every mutation is applied to _that_ copy, so the reviewed file is never opened for writing at all.
+
+Note the deliberate asymmetry with `verify-clean-clone.sh`, which forbids `cp` anywhere in the file. The rule is not "never copy" — it is **know whether the copy preserves the property you are about to measure.** `cp` launders mode, so the verifier must not copy; mutation is destructive by design, so the generator must.
+
+`test-mutate-push-guard.sh` (8 cases) now covers all three: `g1-*` proves a red baseline is refused with no table, `g2-*` is the positive control plus an assertion that kills are attributed by name, and `g3-*` kills the generator mid-mutation and asserts the subject is byte-identical afterwards.
+
+That last one was **vacuous on its first attempt.** `timeout -s KILL 3` looked convincing and proved nothing: at three seconds the generator is still running its baseline, so no mutation has been applied and the subject is trivially unchanged — for the _unfixed_ in-place generator too, which I confirmed by rebuilding it and running it. The kill is now driven from inside the run (the fixture's suite counts its own invocations and kills the generator on the second, when mutant #1 is applied), and `g3-needle-bites` puts the reconstructed pre-fix mechanism through the identical kill to prove it _does_ strand a mutated file. A control written to close a blocker was itself a member of the vacuous family.
+
+Two smaller things fell out of building those cases, both worth recording because both read as the opposite of what they were:
+
+- **`grep -q` under `pipefail` turns a successful match into a failed assertion.** `grep -q` exits at the first match, the producer dies of SIGPIPE, and `pipefail` reports 141. This cost a red `w6-prefix` against a verifier that was printing the right prefix all along. Capture into a variable and test the variable.
+- **`$PPID` inside `$( )` is the subshell, not the caller.** Killing it merely ends the command substitution; the parent carries on and exits 0. The fixture uses `kill -9 0` (the process group) with the generator launched under `setsid --wait`.
+
+**Linting is measured at default severity, and the earlier claim was not.** "shellcheck clean on all five" was published on the strength of `shellcheck -S warning`, which exited 0 — while the default severity exited 1 with twelve `SC2016` findings. A filtered measurement reported as an unfiltered claim is the same shape as everything else on this page. Those literals genuinely must not expand, so `run_mutants()` carries one scoped, documented `SC2016` suppression; all six files are now clean at **default** severity. (A documented "this literal is intentionally unexpanded" is a different thing from a comment asserting a safety property nobody rechecks.)
+
+**Not independently reproduced here:** blocker 1's original repro ran against the real PR checkout, and this session has no credential for that remote. The `w6`/`w7` fixtures replicate the layout at the exact deployed prefix instead, which is a reconstruction, not the original observation. Stated rather than glossed.
+
+## Proposed framework path
+
+```
+framework/tools/git/push-guard.sh               # the guard
+framework/tools/git/test-push-guard.sh          # 46 needles and controls
+framework/tools/git/mutate-push-guard.sh        # regenerates the mutation table above
+framework/tools/git/test-mutate-push-guard.sh   # 8 needles for the generator
+framework/tools/git/verify-clean-clone.sh       # proves the COMMITTED artifact runs
+framework/tools/git/test-verify-clean-clone.sh  # 9 needles for the verifier
+```
+
+Matches the existing `tools/git/test-*.sh` convention. Dependencies: bash 4.4+, git, python3 — `python3` is already an accepted dependency of `ci-queue-wait.sh`.
+
+**All six must be committed mode `100755`.** They were once delivered `100644`, so a clone exited `126 Permission denied` for everyone who was not the author; `verify-clean-clone.sh` exists to make that unshippable and asserts the mode from `git ls-tree` of the source commit, never from the filesystem.
+
+Operator-agnostic: no hostnames, credentials, remotes, or operator-specific paths. Clean under the framework-PR firewall.

packages/mosaic/framework/tools/git/push-guard.sh

@@ -0,0 +1,793 @@
+#!/usr/bin/env bash
+# push-guard.sh - Mechanical guards against verifications that PASS when the
+# thing they verify never happened.
+#
+# WHY THIS EXISTS
+# ---------------
+# Three independent incidents, one shape:
+#   1. An agent's "PUSH VERIFIED" step compared local HEAD to the remote ref and
+#      reported success. The commit had ABORTED, so local trivially equalled
+#      remote. The guard could not distinguish "pushed" from "committed nothing".
+#   2. An agent chained a push after a FAILED commit, ran on stale state, and
+#      pushed an EMPTY commit carrying an unrelated commit's message.
+#   3. An agent committed unresolved conflict markers into 70 generated files and
+#      pushed invalid JSON to a default branch.
+#
+# All three are the same defect: a check whose success condition is satisfied by
+# the null case. This script asserts the POSITIVE fact (a new object exists, the
+# remote MOVED, the content parses) rather than the absence of an error.
+#
+# DESIGN RULES (do not relax these)
+#   * Every check exits NON-ZERO and names what failed. There is deliberately no
+#     --warn-only / --soft flag: a guard that can degrade to a warning is the
+#     fail-open we are trying to remove.
+#   * Checks are fail-CLOSED. `set -euo pipefail` means an unexpected git or
+#     network error aborts non-zero rather than falling through to "OK".
+#   * Nothing is skipped silently. A check with no applicable inputs says so on
+#     stdout instead of contributing a quiet green.
+#
+# EXIT CODES
+#   0   all requested checks passed
+#   2   conflict markers present, or the index has unmerged paths
+#   3   staged JSON does not parse
+#   4   push verification failed (remote did not move, or moved elsewhere)
+#   5   nothing staged / empty commit — the null case, refused
+#   6   NO JSON DECISION — no --json-path and no usable .push-guard.json
+#   64  usage error
+#
+# Dependencies: bash 4.4+, git, python3.
+
+set -euo pipefail
+
+readonly EX_OK=0
+readonly EX_CONFLICT=2
+readonly EX_JSON=3
+readonly EX_PUSH=4
+readonly EX_NULL=5
+readonly EX_CONFIG=6
+readonly EX_USAGE=64
+
+# Repo-level configuration. Its ABSENCE is refused, not defaulted — see
+# resolve_json_config() for why.
+readonly CONFIG_FILE=".push-guard.json"
+
+# Conflict-marker detection.
+#
+# We match `<<<<<<<`, `>>>>>>>` and the diff3 `|||||||` marker, each anchored at
+# column 0 and required to be followed by a space or end-of-line (real markers
+# are exactly seven characters plus an optional ref label).
+#
+# We deliberately do NOT match a bare `=======` line. It is the one marker that
+# collides with ordinary prose — reStructuredText section underlines and ASCII
+# rules use it constantly — and a guard that fires on documentation gets switched
+# off, which costs more than the miss. Every genuine conflict git writes contains
+# `<<<<<<<` and `>>>>>>>` as well, so requiring those loses no real detection.
+readonly MARKER_PATTERNS=(
+    -e '^<<<<<<<( |$)'
+    -e '^>>>>>>>( |$)'
+    -e '^[|]{7}( |$)'
+)
+
+log()  { printf '%s\n' "$*"; }
+fail() {
+    local code="$1"; shift
+    printf '\n' >&2
+    printf 'PUSH-GUARD FAILED: %s\n' "$1" >&2
+    shift
+    local line
+    for line in "$@"; do printf '  %s\n' "$line" >&2; done
+    printf '\n' >&2
+    exit "$code"
+}
+
+usage() {
+    cat <<'EOF'
+Usage:
+  push-guard.sh check-staged [--json-path <pathspec>]...
+                             [--allow-invalid-json <pathspec>]...
+  push-guard.sh push --remote <remote> --branch <branch> [--since-head <sha>]
+                     [-- <extra git push args>...]
+  push-guard.sh --help
+
+Subcommands:
+  check-staged   Run pre-commit content guards against the STAGED index:
+                   (a) no unmerged index paths, no conflict markers
+                   (c) staged JSON under the nominated paths parses
+                 Refuses to pass when nothing is staged (exit 5).
+                 Check (c) requires an EXPLICIT decision — either --json-path,
+                 or .push-guard.json. Saying nothing is refused (exit 6).
+
+  push           Perform a push and prove it HAPPENED:
+                   - HEAD is a non-empty commit (differs from its parent)
+                   - with --since-head: HEAD advanced past that sha
+                   - the remote ref MOVED, and now equals local HEAD
+                 Capturing the remote ref BEFORE the push is what makes
+                 "remote == local" meaningful; without it the assertion is
+                 satisfied by having pushed nothing.
+
+Options:
+  --json-path <pathspec>           Git pathspec of generated/serialized JSON to
+                                   parse-check, e.g. 'data/**/*.json'. Repeatable.
+                                   Opt-in on purpose: many real .json files are
+                                   JSONC (tsconfig) or templates and do NOT parse
+                                   strictly. Nominate the generated ones. Satisfies
+                                   the decision requirement on its own; overrides a
+                                   config opt-out (loudly).
+  --allow-invalid-json <pathspec>  Exempt a path from the JSON parse check
+                                   (for deliberate malformed-input fixtures).
+                                   Exemptions are printed, never silent.
+  --since-head <sha>               HEAD before your commit step. Asserts a new
+                                   commit object was actually created.
+  --remote <name>                  Remote to push to.
+  --branch <name>                  Branch to push.
+
+Repo config (.push-guard.json, at the repository root):
+  {"json_paths": ["data/**/*.json"], "allow_invalid_json": ["fixtures/*"]}
+    — nominate generated JSON for parse-checking.
+  {"json_check": "none", "reason": "no generated JSON in this repo"}
+    — opt out. The reason is REQUIRED and is printed on every run.
+
+An opt-out is only accepted from this file, never from a command-line flag: a
+committed reason can be read in a diff, an absent flag cannot be reviewed at all.
+An invalid config is refused outright rather than treated as absent.
+
+There is no flag to downgrade a failure to a warning. That is intentional.
+EOF
+}
+
+require_repo() {
+    git rev-parse --show-toplevel >/dev/null 2>&1 \
+        || fail "$EX_USAGE" "not inside a git repository"
+    cd "$(git rev-parse --show-toplevel)"
+}
+
+# ---------------------------------------------------------------- check-staged
+
+# staged_files_z <array-name> [pathspec...]
+#
+# THE FAIL-OPEN THIS FUNCTION EXISTS TO REMOVE:
+#   mapfile -d '' -t files < <(git diff ...)
+# observes MAPFILE's exit status, never the producer's. When git diff dies -- a
+# bad pathspec, a corrupt index -- mapfile cheerfully reads zero bytes and
+# succeeds, and the caller then reports that silence as "nothing to check".
+#
+# `set -o pipefail` does NOT cover this. pipefail applies to PIPELINES; a process
+# substitution is an asynchronous child whose status is never collected. That is
+# the precise reason every `cmd | cmd` in this file is safe and both `< <(cmd)`
+# constructs were not -- a distinction worth stating, because "we set pipefail"
+# reads like whole-file coverage and is not.
+#
+# Both callers now route through here, so the category is gone rather than the
+# two known instances being patched.
+staged_files_z() {
+    local -n _out="$1"; shift
+    local tmp err status=0
+    tmp="$(mktemp)"; err="$(mktemp)"
+    if (( $# )); then
+        git diff --cached --name-only --diff-filter=ACM --no-renames -z \
+            -- "$@" >"$tmp" 2>"$err" || status=$?
+    else
+        git diff --cached --name-only --diff-filter=ACM --no-renames -z \
+            >"$tmp" 2>"$err" || status=$?
+    fi
+    if (( status != 0 )); then
+        local msg; msg="$(tr '\n' ' ' <"$err")"
+        rm -f "$tmp" "$err"
+        fail "$EX_CONFIG" \
+            "CANNOT ENUMERATE STAGED FILES — git diff exited $status" \
+            "git said: ${msg:-(no message)}" \
+            "" \
+            "Refusing to report a result. An enumeration that failed returns no" \
+            "files, which is indistinguishable from a clean tree — reporting that" \
+            "as OK would be a silent pass on an unexamined index."
+    fi
+    _out=()
+    mapfile -d '' -t _out <"$tmp"
+    rm -f "$tmp" "$err"
+}
+
+check_unmerged() {
+    local unmerged
+    unmerged="$(git ls-files --unmerged | awk '{print $4}' | sort -u)"
+    if [[ -n "$unmerged" ]]; then
+        mapfile -t paths <<<"$unmerged"
+        fail "$EX_CONFLICT" \
+            "the index has UNMERGED paths — a merge/rebase is still in progress" \
+            "${paths[@]}" \
+            "" \
+            "Resolve the conflict and 'git add' the result. Do not commit past this."
+    fi
+    log "  ok  index has no unmerged paths"
+}
+
+check_conflict_markers() {
+    local -a files=("$@")
+    local hits
+    # git grep --cached searches the INDEX (what will actually be committed),
+    # not the working tree.
+    #
+    # -a (treat every blob as text), NOT -I (skip binary). -I honours git's
+    # binary classification, which includes an explicit `.gitattributes` `binary`
+    # attribute. A repo that marks a path binary would have its staged conflict
+    # markers silently skipped while the summary still counted the file as
+    # scanned — a clean pass AND a false count. Verified reproducible. The cost
+    # of -a is that a genuine binary blob could theoretically emit a noisy match
+    # line; a false alarm is recoverable, a silent miss is not.
+    # -E is load-bearing: git grep defaults to BASIC regex, in which '(', '|'
+    # and '{7}' are literal characters. Without it these patterns match nothing
+    # and the check reports a clean pass over a file full of markers. That
+    # failure was caught by the needle, not by review.
+    #
+    # Exit status is discriminated, NOT swallowed. git grep returns 1 for "no
+    # match" and >=2 for a real error (bad pathspec, unreadable index). A blanket
+    # '|| true' would turn a broken scan into "ok, no conflict markers" — the
+    # same fail-open in the guard's own error handling.
+    local status=0
+    hits="$(git grep --cached -a -n -E "${MARKER_PATTERNS[@]}" -- "${files[@]}")" || status=$?
+    if (( status > 1 )); then
+        fail "$EX_CONFLICT" \
+            "git grep FAILED (exit $status) — the conflict scan did not run" \
+            "Refusing to report a clean result from a scan that did not complete."
+    fi
+    if [[ -n "$hits" ]]; then
+        mapfile -t lines <<<"$hits"
+        fail "$EX_CONFLICT" \
+            "staged content contains unresolved CONFLICT MARKERS" \
+            "${lines[@]}" \
+            "" \
+            "These are staged and would be committed verbatim."
+    fi
+    log "  ok  no conflict markers in ${#files[@]} staged file(s)"
+}
+
+# JSON parse check.
+#
+# SCOPE IS OPT-IN, AND THAT IS A MEASURED DECISION, NOT LAZINESS.
+# The first draft checked every staged *.json. Run against a real repository that
+# turned out to be 17 of 119 tracked .json files failing a strict parse — all of
+# them legitimate: every tsconfig*.json is JSONC (comments are legal there) and
+# the CA templates are Go templates that merely carry a .json suffix. An
+# on-by-default check would have fired on ~14% of this repo's JSON, and a guard
+# that cries wolf gets routed around until the bypass is habitual — which is
+# worse than no guard, because the bypass then also covers the true positives.
+#
+# So the caller nominates the generated/serialized paths this check is FOR, as
+# git pathspecs (git, not bash, expands them — '**' works correctly).
+#
+# WHAT SAYING NOTHING NOW COSTS YOU
+# ---------------------------------
+# The first release announced "JSON check NOT REQUESTED" and continued. That was
+# visible rather than silent, which is better — but it is still an ABSENCE, and
+# an absence is not reviewable. Nobody reads a line that has printed correctly
+# ten thousand times. A repo that needed the check and never wired it up stayed
+# unprotected forever, and nothing ever failed.
+#
+# The decision is now MANDATORY and must come from one of two places:
+#   * turning the check ON  — --json-path on the command line, or "json_paths"
+#                             in .push-guard.json
+#   * turning the check OFF — ONLY "json_check": "none" in .push-guard.json,
+#                             which REQUIRES a non-empty "reason"
+# Saying nothing at all is refused (exit 6).
+#
+# The asymmetry is deliberate. Turning a check on is safe from anywhere. Turning
+# one OFF is confined to a committed file because that is the only form a human
+# can review: you can read a reason in a diff, and you cannot review the fact
+# that nobody typed a flag. An opt-out that lives in an ad-hoc command line is
+# just the old fail-open with extra steps.
+# The config parser, held as a string rather than an inline heredoc.
+#
+# A `<<'PY'` heredoc INSIDE a $( ) command substitution makes bash emit
+#   warning: command substitution: 1 unterminated here-document
+# on every single run. It still executed, every needle stayed green and the
+# static linter stayed clean — the warning goes to stderr and broke no
+# assertion. It surfaced only when the guard was run against a real
+# repository. A tool built to refuse quiet output was quietly polluting
+# stderr; needle 'z1' now asserts the guard emits no warnings at all.
+#
+# `read -d ''` returns non-zero at EOF without finding a NUL, which is the
+# NORMAL path when slurping a heredoc — hence `|| true`. That is the one
+# shape where it does not mask a real error, unlike the `git grep || true`
+# this codebase already removed once.
+IFS='' read -r -d '' CONFIG_PARSER <<'PY' || true
+import json, sys
+
+path = sys.argv[1]
+try:
+    with open(path) as fh:
+        cfg = json.load(fh)
+except Exception as exc:
+    sys.stderr.write("does not parse: %s" % exc)
+    sys.exit(2)
+
+if not isinstance(cfg, dict):
+    sys.stderr.write("must contain a JSON object, got %s" % type(cfg).__name__)
+    sys.exit(2)
+
+def clean_list(name, value):
+    if not isinstance(value, list):
+        sys.stderr.write('"%s" must be an array' % name)
+        sys.exit(2)
+    for item in value:
+        if not isinstance(item, str) or not item.strip():
+            sys.stderr.write('"%s" must contain only non-empty strings' % name)
+            sys.exit(2)
+        # Tabs/newlines would be mangled by the tab-delimited handoff below.
+        # Reject them explicitly rather than silently truncating a pathspec.
+        if "\t" in item or "\n" in item:
+            sys.stderr.write('"%s" entry contains a tab or newline: %r' % (name, item))
+            sys.exit(2)
+    return value
+
+mode = cfg.get("json_check")
+paths = cfg.get("json_paths")
+allow = cfg.get("allow_invalid_json", [])
+
+if mode is not None and mode != "none":
+    sys.stderr.write('"json_check" must be "none" if present, got %r' % (mode,))
+    sys.exit(2)
+
+if mode == "none":
+    if paths:
+        sys.stderr.write('"json_check": "none" and "json_paths" are mutually exclusive')
+        sys.exit(2)
+    reason = cfg.get("reason")
+    if not isinstance(reason, str) or not reason.strip():
+        sys.stderr.write('"json_check": "none" REQUIRES a non-empty "reason"')
+        sys.exit(2)
+    print("MODE\tnone")
+    print("REASON\t%s" % reason.strip().replace("\t", " ").replace("\n", " "))
+    sys.exit(0)
+
+if paths is None:
+    sys.stderr.write(
+        'states no decision — needs "json_paths", '
+        'or "json_check": "none" with a "reason"'
+    )
+    sys.exit(2)
+
+clean_list("json_paths", paths)
+if not paths:
+    sys.stderr.write('"json_paths" must not be empty')
+    sys.exit(2)
+clean_list("allow_invalid_json", allow)
+
+print("MODE\tcheck")
+for item in paths:
+    print("JPATH\t%s" % item)
+for item in allow:
+    print("ALLOW\t%s" % item)
+PY
+
+resolve_json_config() {
+    local cfg out status=0
+    cfg="$(git rev-parse --show-toplevel)/$CONFIG_FILE"
+
+    if [[ ! -f "$cfg" ]]; then
+        CFG_MODE="absent"
+        return 0
+    fi
+
+    # A malformed config must REFUSE, never degrade to "treat as absent". That
+    # fallback would rebuild precisely the fail-open this gate closes: a typo in
+    # the config would silently disable the check it was written to enable.
+    out="$(python3 -c "$CONFIG_PARSER" "$cfg" 2>&1)" || status=$?
+
+    if (( status != 0 )); then
+        fail "$EX_CONFIG" \
+            "$CONFIG_FILE is INVALID — $out" \
+            "" \
+            "Refusing to run. A config that does not parse is not the same as no" \
+            "config: treating it as absent would silently disable the very check" \
+            "this file was written to enable."
+    fi
+
+    local key val
+    while IFS=$'\t' read -r key val; do
+        case "$key" in
+            MODE)   CFG_MODE="$val" ;;
+            REASON) CFG_REASON="$val" ;;
+            JPATH)  CFG_PATHS+=("$val") ;;
+            ALLOW)  CFG_ALLOW+=("$val") ;;
+        esac
+    done <<<"$out"
+
+    # ------------------------------------------------------------------
+    # THE ASYMMETRY, ENFORCED RATHER THAN INTENDED.
+    # ON may come from anywhere: turning a check on needs no review.
+    # OFF must come from a COMMITTED object, because the entire argument for
+    # requiring a written reason was that a reason is reviewable in a diff
+    # while an absence is not. An opt-out honoured from an untracked
+    # working-tree file is not reviewable either -- it is an ad-hoc local
+    # bypass wearing a config file's clothes, and it defeats the design.
+    # So the OFF decision is re-read from HEAD and the working tree gets no
+    # vote in it. A committed ON flipped to OFF locally is likewise refused.
+    # ------------------------------------------------------------------
+    [[ "$CFG_MODE" == "none" ]] || return 0
+
+    local rel cmode cblob cout cstatus=0
+    rel="$(git ls-files --full-name --error-unmatch -- "$cfg" 2>/dev/null)" || rel=""
+    if [[ -z "$rel" ]]; then
+        fail "$EX_CONFIG" \
+            "OPT-OUT IS NOT REVIEWABLE — $CONFIG_FILE is not tracked in git" \
+            "recorded reason was: ${CFG_REASON:-(none)}" \
+            "" \
+            "The opt-out requires a written reason precisely so it shows up in a" \
+            "diff. An untracked file shows up in nobody's review, so honouring it" \
+            "would rebuild the unreviewable bypass this design exists to prevent." \
+            "" \
+            "Commit $CONFIG_FILE, then run again. Turning the check ON needs no" \
+            "commit; only turning it OFF does."
+    fi
+
+    # A COMMITTED SYMLINK (mode 120000) is a mutable target: the reviewed blob
+    # is a path, and what it points at can change without any diff at all.
+    cmode="$(git ls-tree HEAD -- "$rel" 2>/dev/null | awk '{print $1}')"
+    if [[ -z "$cmode" ]]; then
+        fail "$EX_CONFIG" \
+            "OPT-OUT IS NOT REVIEWABLE — $CONFIG_FILE is staged but not yet in HEAD" \
+            "recorded reason was: ${CFG_REASON:-(none)}" \
+            "" \
+            "A staged-but-uncommitted opt-out has not been through review either." \
+            "Commit it first."
+    fi
+    if [[ "$cmode" == "120000" ]]; then
+        fail "$EX_CONFIG" \
+            "OPT-OUT IS NOT REVIEWABLE — $CONFIG_FILE is a committed SYMLINK" \
+            "" \
+            "The reviewed object would be a path, not a decision: what it points" \
+            "at can be changed later without producing any diff. Commit the" \
+            "config as a regular file."
+    fi
+
+    cblob="$(git show "HEAD:$rel" 2>/dev/null)" || cblob=""
+    cout="$(printf '%s' "$cblob" | python3 -c "$CONFIG_PARSER" /dev/stdin 2>&1)" || cstatus=$?
+    if (( cstatus != 0 )); then
+        fail "$EX_CONFIG" \
+            "COMMITTED $CONFIG_FILE is INVALID — $cout" \
+            "" \
+            "The working tree opts out, but the committed version does not parse," \
+            "so there is no reviewable decision to honour."
+    fi
+    local cmode_val="" creason=""
+    while IFS=$'\t' read -r key val; do
+        case "$key" in
+            MODE)   cmode_val="$val" ;;
+            REASON) creason="$val" ;;
+        esac
+    done <<<"$cout"
+
+    if [[ "$cmode_val" != "none" ]]; then
+        fail "$EX_CONFIG" \
+            "LOCAL-ONLY OPT-OUT — the working tree turns the JSON check OFF but" \
+            "HEAD does not (committed decision: $cmode_val)" \
+            "working-tree reason: ${CFG_REASON:-(none)}" \
+            "" \
+            "An uncommitted edit that disables a committed check is exactly the" \
+            "unreviewable bypass this guard refuses. Commit the change if it is" \
+            "real; revert it if it was a local convenience."
+    fi
+
+    # Print the COMMITTED reason, never the working tree's: the reason anyone
+    # can actually review is the one in the object.
+    CFG_REASON="$creason"
+}
+
+check_staged_json() {
+    local -a checked=() skipped=()
+    local f err
+    local -a pathspec=()
+
+    resolve_json_config
+
+    if (( ${#JSON_PATHS[@]} == 0 )); then
+        case "$CFG_MODE" in
+            absent)
+                fail "$EX_CONFIG" \
+                    "NO JSON DECISION — no --json-path, and no $CONFIG_FILE" \
+                    "" \
+                    "This guard will not run without an explicit decision about" \
+                    "staged-JSON validation. Create $CONFIG_FILE with EITHER:" \
+                    "" \
+                    '  {"json_paths": ["data/**/*.json"]}' \
+                    "" \
+                    "or, if this repo genuinely has no generated JSON:" \
+                    "" \
+                    '  {"json_check": "none", "reason": "<why>"}' \
+                    "" \
+                    "The reason is mandatory so the opt-out is recorded and" \
+                    "reviewable in the diff, instead of being an absence nobody sees."
+                ;;
+            none)
+                log "  --  JSON check OPTED OUT in $CONFIG_FILE — recorded reason: $CFG_REASON"
+                return 0
+                ;;
+            check)
+                JSON_PATHS=(${CFG_PATHS[@]+"${CFG_PATHS[@]}"})
+                ALLOW_INVALID_JSON+=(${CFG_ALLOW[@]+"${CFG_ALLOW[@]}"})
+                log "  ..  JSON paths from $CONFIG_FILE: ${JSON_PATHS[*]}"
+                ;;
+        esac
+    else
+        # An explicit --json-path turns the check ON, so it satisfies the decision
+        # requirement by itself. If the config opted out, the nomination WINS and
+        # says so loudly — resolving a contradiction toward more checking is the
+        # only safe direction, but silently ignoring a committed opt-out would
+        # hide a real disagreement.
+        case "$CFG_MODE" in
+            none)
+                log "  !!  $CONFIG_FILE opts out of the JSON check, but --json-path was"
+                log "  !!  given — honouring the nomination and checking anyway."
+                ;;
+            check)
+                JSON_PATHS+=(${CFG_PATHS[@]+"${CFG_PATHS[@]}"})
+                ALLOW_INVALID_JSON+=(${CFG_ALLOW[@]+"${CFG_ALLOW[@]}"})
+                ;;
+        esac
+    fi
+
+    # Normalize to :(glob) magic. WITHOUT it, git's default pathspec matching
+    # makes 'data/**/*.json' require at least one intermediate directory, so it
+    # matches data/sub/b.json but SILENTLY SKIPS data/a.json. The obvious
+    # spelling would then deliver partial coverage with no warning — a
+    # quiet-underscan, which is the same family of defect as a quiet pass.
+    # Pathspecs that already carry explicit magic (leading ':') are left alone.
+    for f in "${JSON_PATHS[@]}"; do
+        [[ "$f" == :* ]] && pathspec+=("$f") || pathspec+=(":(glob)$f")
+    done
+    for f in ${ALLOW_INVALID_JSON[@]+"${ALLOW_INVALID_JSON[@]}"}; do
+        [[ "$f" == :* ]] && pathspec+=("$f") || pathspec+=(":(exclude,glob)$f")
+        skipped+=("$f")
+    done
+
+    local -a files=()
+    staged_files_z files "${pathspec[@]}"
+
+    for f in ${files[@]+"${files[@]}"}; do
+        [[ "$f" == *.json ]] || continue
+
+        if ! err="$(git show ":$f" | python3 -c '
+import json, sys
+try:
+    json.load(sys.stdin)
+except Exception as exc:
+    sys.stderr.write(str(exc))
+    sys.exit(1)
+' 2>&1)"; then
+            fail "$EX_JSON" \
+                "staged JSON does not parse: $f" \
+                "$err" \
+                "" \
+                "A serialization error from a generator is a STOP, not something to commit past."
+        fi
+        checked+=("$f")
+    done
+
+    for f in ${skipped[@]+"${skipped[@]}"}; do
+        log "  --  JSON check EXEMPTED by --allow-invalid-json: $f"
+    done
+    if (( ${#checked[@]} == 0 )); then
+        log "  --  no staged .json under ${JSON_PATHS[*]} — JSON check not applicable"
+    else
+        log "  ok  ${#checked[@]} staged .json file(s) under ${JSON_PATHS[*]} parse"
+    fi
+}
+
+cmd_check_staged() {
+    require_repo
+    log "push-guard: checking staged content"
+
+    check_unmerged
+
+    # --no-renames is load-bearing, NOT cosmetic. Git detects renames by default
+    # (diff.renames=true since 2.9), so a `git mv` plus a small edit is reported
+    # as ONE 'R' entry — which --diff-filter=ACM DOES NOT MATCH. The renamed file
+    # becomes invisible to every content check: staged conflict markers sail
+    # through and the guard prints "staged content OK". Verified reproducible at
+    # 97% similarity with an ordinary co-staged file present. --no-renames
+    # decomposes each rename back into D + A so the new path is always seen.
+    # (Adding R to the filter also works, but --name-only -z emits two paths for
+    # a rename and is ambiguous to parse — this removes the category instead.)
+    #
+    # SECOND INSTANCE OF THE SAME DEFECT, found by sweeping for the construct
+    # rather than fixing only the one that was reported. This one failed CLOSED
+    # (zero files hit "NOTHING IS STAGED"), so it was never a security hole --
+    # but it reported a confident WRONG DIAGNOSIS, sending anyone debugging it
+    # at their index instead of at the failing git invocation.
+    local -a files=()
+    staged_files_z files
+    if (( ${#files[@]} == 0 )); then
+        fail "$EX_NULL" \
+            "NOTHING IS STAGED" \
+            "About to commit, but the index is identical to HEAD." \
+            "" \
+            "This is the null case: a commit here is empty, and any later" \
+            "'verified' step would be asserting against content that does not exist."
+    fi
+
+    check_conflict_markers "${files[@]}"
+    check_staged_json "${files[@]}"
+
+    log "push-guard: staged content OK"
+}
+
+# ------------------------------------------------------------------------ push
+
+remote_sha() {
+    # Empty output means the branch does not exist on the remote yet.
+    # A network/auth failure makes ls-remote non-zero, which set -e turns into an
+    # abort — the guard never treats an unreachable remote as "unchanged".
+    git ls-remote "$1" "refs/heads/$2" | awk 'NR==1{print $1}'
+}
+
+cmd_push() {
+    require_repo
+    local remote="" branch="" since_head=""
+    local -a extra=()
+
+    while (( $# )); do
+        case "$1" in
+            --remote) remote="${2:-}"; shift 2 ;;
+            --branch) branch="${2:-}"; shift 2 ;;
+            --since-head) since_head="${2:-}"; shift 2 ;;
+            --) shift; extra=("$@"); break ;;
+            *) fail "$EX_USAGE" "unknown argument to push: $1" ;;
+        esac
+    done
+    [[ -n "$remote" && -n "$branch" ]] \
+        || fail "$EX_USAGE" "push requires --remote and --branch"
+
+    local head
+    head="$(git rev-parse HEAD)"
+    log "push-guard: verifying push of $head -> $remote/$branch"
+
+    # (1) Did a new commit actually get created?
+    if [[ -n "$since_head" ]]; then
+        git rev-parse --verify --quiet "${since_head}^{commit}" >/dev/null \
+            || fail "$EX_USAGE" \
+                "--since-head is not a commit in this repository: $since_head" \
+                "" \
+                "Cannot verify advancement against a start point that does not exist."
+
+        if [[ "$head" == "$since_head" ]]; then
+            fail "$EX_NULL" \
+                "HEAD DID NOT ADVANCE — no commit was created" \
+                "HEAD is still $head" \
+                "" \
+                "Your commit step failed and execution continued on stale state." \
+                "Pushing now would publish something you did not just build."
+        fi
+        # INEQUALITY IS NOT ADVANCEMENT. "different from where I started" is
+        # satisfied by checking out any unrelated commit -- including one that
+        # existed long before this session -- which would let pre-existing work
+        # be published as something just built. The claim being made is that new
+        # commits were created ON TOP OF the recorded start point, and only
+        # ancestry states that.
+        if ! git merge-base --is-ancestor "$since_head" "$head"; then
+            fail "$EX_NULL" \
+                "HEAD IS NOT A DESCENDANT of the recorded start point" \
+                "start: $since_head" \
+                "head : $head" \
+                "" \
+                "HEAD differs from the start point but does not build on it, so" \
+                "this is a checkout of other history rather than work you just" \
+                "created. Being different is not the same as having advanced."
+        fi
+        log "  ok  HEAD advanced ${since_head:0:9} -> ${head:0:9} (descendant)"
+    fi
+
+    # (2) Is that commit non-empty?
+    # EXEMPTING BY PARENT COUNT WAS A FAIL-OPEN. An empty root commit sailed
+    # through "emptiness check not applicable" and was then reported as a
+    # CONFIRMED PUSH -- directly contradicting the non-empty requirement this
+    # step exists to enforce. Root and merge commits do have well-defined
+    # emptiness; the original code declined to define it, which is not the same
+    # as it being undefined.
+    local parents
+    parents="$(git rev-list --parents -n 1 HEAD | wc -w)"
+    if (( parents == 2 )); then   # sha + exactly one parent
+        if git diff --quiet HEAD^ HEAD; then
+            fail "$EX_NULL" \
+                "HEAD IS AN EMPTY COMMIT — it changes nothing against its parent" \
+                "commit $head" \
+                "" \
+                "An empty commit carrying a real message is indistinguishable" \
+                "from real work in the log. Refusing to push it."
+        fi
+        log "  ok  HEAD is a non-empty commit"
+    elif (( parents > 2 )); then
+        # A merge is empty when its tree matches EVERY parent: it then carries
+        # no content of its own and no integration either.
+        local p all_same=yes
+        for p in $(git rev-list --parents -n 1 HEAD | cut -d' ' -f2-); do
+            git diff --quiet "$p" HEAD || { all_same=no; break; }
+        done
+        if [[ "$all_same" == yes ]]; then
+            fail "$EX_NULL" \
+                "HEAD IS AN EMPTY MERGE — its tree is identical to every parent" \
+                "commit $head" \
+                "" \
+                "It integrates nothing and introduces nothing. Refusing to push it."
+        fi
+        log "  ok  HEAD is a non-empty merge commit"
+    else
+        # A root commit has no parent, so emptiness is measured against the
+        # empty tree: it is empty when it adds no paths at all.
+        if [[ -z "$(git diff-tree --root -r --name-only --no-commit-id HEAD)" ]]; then
+            fail "$EX_NULL" \
+                "HEAD IS AN EMPTY ROOT COMMIT — it introduces no files" \
+                "commit $head" \
+                "" \
+                "A root commit is empty when it adds nothing against the empty" \
+                "tree. Refusing to push it."
+        fi
+        log "  ok  HEAD is a non-empty root commit"
+    fi
+
+    # (3) Capture the remote BEFORE. This is the step whose absence made the
+    #     original "PUSH VERIFIED" a false positive.
+    local before after
+    before="$(remote_sha "$remote" "$branch")"
+    log "  ..  remote before: ${before:-<branch does not exist>}"
+
+    git push "$remote" "HEAD:refs/heads/$branch" ${extra[@]+"${extra[@]}"}
+
+    after="$(remote_sha "$remote" "$branch")"
+    log "  ..  remote after:  ${after:-<absent>}"
+
+    # (4) The remote must now equal local HEAD...
+    if [[ "$after" != "$head" ]]; then
+        fail "$EX_PUSH" \
+            "REMOTE DOES NOT MATCH LOCAL HEAD after push" \
+            "local HEAD:    $head" \
+            "remote $branch: ${after:-<absent>}" \
+            "" \
+            "The push did not land what you are holding."
+    fi
+    # (5) ...AND it must have MOVED to get there. Without this, a push that
+    #     transferred nothing passes step (4) trivially.
+    if [[ "$after" == "$before" ]]; then
+        fail "$EX_PUSH" \
+            "REMOTE DID NOT MOVE — nothing was actually pushed" \
+            "remote was already at $after before this push ran" \
+            "" \
+            "'remote == local' is satisfied by having pushed nothing. That is" \
+            "the false positive this guard exists to catch: the work you think" \
+            "you just published was already there, or was never committed."
+    fi
+
+    log "push-guard: PUSH CONFIRMED ${before:0:9}${before:+ }-> ${after:0:9}"
+}
+
+# ------------------------------------------------------------------------ main
+
+ALLOW_INVALID_JSON=()
+JSON_PATHS=()
+
+CFG_MODE="absent"
+CFG_REASON=""
+CFG_PATHS=()
+CFG_ALLOW=()
+
+main() {
+    (( $# )) || { usage; exit "$EX_USAGE"; }
+    local sub="$1"; shift
+    case "$sub" in
+        check-staged)
+            while (( $# )); do
+                case "$1" in
+                    --json-path)          JSON_PATHS+=("${2:-}"); shift 2 ;;
+                    --allow-invalid-json) ALLOW_INVALID_JSON+=("${2:-}"); shift 2 ;;
+                    *) fail "$EX_USAGE" "unknown argument to check-staged: $1" ;;
+                esac
+            done
+            cmd_check_staged
+            ;;
+        push)        cmd_push "$@" ;;
+        -h|--help)   usage ;;
+        *)           usage; exit "$EX_USAGE" ;;
+    esac
+    # Explicit: the only way to reach here is with every requested check passed.
+    exit "$EX_OK"
+}
+
+main "$@"

packages/mosaic/framework/tools/git/test-mutate-push-guard.sh

@@ -0,0 +1,178 @@
+#!/usr/bin/env bash
+# test-mutate-push-guard.sh -- needles for the mutation generator.
+#
+# The generator's entire output is a COVERAGE CLAIM, and the README publishes it.
+# That makes it the most dangerous file here: when it is wrong it does not fail,
+# it reassures. Two of its three defects were found by review rather than by any
+# test, so these are the cases that had to exist.
+#
+#   g1  a RED BASELINE must be refused before any mutant runs. Previously ONE
+#       pre-existing suite failure -- changing no guard behaviour at all --
+#       satisfied every mutant: 13 killed, 0 survived, table emitted, exit 0.
+#   g3  an INTERRUPTED run must leave the subject byte-identical. Restoration
+#       used to lean on an EXIT trap, and A TRAP IS CLEANUP, NOT ISOLATION:
+#       SIGKILL cannot run it, so an interrupted run stranded a mutated
+#       push-guard.sh that the next suite run silently inherited.
+#   g2  is the positive control. Without it every case here could be passing
+#       because the generator refuses unconditionally, which is a wall, not a gate.
+
+set -uo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+GEN="$HERE/mutate-push-guard.sh"
+PASS=0; FAIL=0
+TMP="$(mktemp -d)"; trap 'rm -rf "$TMP"' EXIT
+
+ok()   { printf '  ok    [%-16s] %s\n' "$1" "${2:-}"; PASS=$(( PASS + 1 )); }
+bad()  { printf '  FAIL  [%-16s] %s\n' "$1" "$2"; FAIL=$(( FAIL + 1 )); }
+
+# fixture <name> -- a directory holding an independent copy of guard + suite
+fixture() {
+    local d="$TMP/$1"; mkdir -p "$d"
+    install -m 755 "$HERE/push-guard.sh"      "$d/push-guard.sh"
+    install -m 755 "$HERE/test-push-guard.sh" "$d/test-push-guard.sh"
+    printf '%s\n' "$d"
+}
+
+echo "== g1: a RED BASELINE must be refused, with NO table emitted =="
+# The injected case asserts exit 99 from `true`. It fails always, and it changes
+# NO guard behaviour -- which is the whole point: a defect anywhere in the suite
+# used to be enough to certify every branch as covered.
+g1="$(fixture red)"
+python3 - "$g1/test-push-guard.sh" <<'PY'
+import sys
+p = sys.argv[1]; s = open(p).read()
+anchor = 'mkdir -p "$WORK_DIR"\n'
+assert s.count(anchor) == 1, "injection anchor not unique -- fixture would not be the red baseline"
+s = s.replace(anchor, anchor + '\nexpect NEEDLE 99 "injected always-failing case" -- true\n', 1)
+open(p, "w").write(s)
+PY
+# Prove the fixture really IS red before asserting the generator notices, or g1
+# could pass against a green suite and test nothing.
+if "$g1/test-push-guard.sh" >/dev/null 2>&1; then
+    bad g1-fixture "injected suite still passes -- fixture is not a red baseline"
+else
+    ok g1-fixture "fixture suite is red, as required"
+fi
+out="$("$GEN" --dir "$g1" 2>&1)"; rc=$?
+if (( rc != 0 )) && [[ "$out" == *"REFUSING: baseline is not green"* ]]; then
+    ok g1-refused "exit $rc, refused before mutating"
+else
+    bad g1-refused "wanted nonzero + refusal; got rc=$rc"
+fi
+if [[ "$out" != *"README TABLE"* && "$out" != *"killed,"* ]]; then
+    ok g1-no-table "no coverage table emitted from a red baseline"
+else
+    bad g1-no-table "a table or kill count was published despite the red baseline"
+fi
+
+echo
+echo "== g3: an INTERRUPTED run must not alter the subject =="
+# THE KILL MUST LAND INSIDE A MUTATION WINDOW OR THIS CASE PROVES NOTHING.
+# First attempt used `timeout -s KILL 3`. At three seconds the generator is still
+# running its BASELINE, so no mutation has been applied yet and the subject is
+# trivially unchanged -- for the ORIGINAL in-place generator too, which I
+# confirmed by running it. The control passed for a reason unrelated to the fix:
+# a vacuous control, in the control written for blocker 3.
+#
+# So the kill is now driven from INSIDE the run. The fixture's suite counts its
+# own invocations and SIGKILLs the generator on the second one -- invocation 1 is
+# the baseline, invocation 2 happens with mutant #1 APPLIED. That is exactly the
+# window where an in-place generator strands a mutated subject.
+instrument_kill_at_second_run() {
+    python3 - "$1" <<'PY'
+import sys
+p = sys.argv[1]; s = open(p).read()
+anchor = 'PASS=0\nFAIL=0\n'
+assert s.count(anchor) == 1, "instrumentation anchor not unique"
+inject = anchor + '''
+if [[ -n "${G3_COUNTER:-}" ]]; then
+    n=$(( $(cat "$G3_COUNTER" 2>/dev/null || echo 0) + 1 ))
+    printf '%s' "$n" > "$G3_COUNTER"
+    # Invocation 2 = first mutant applied. Kill the generator where it hurts.
+    # `kill -9 0` targets the whole PROCESS GROUP, not $PPID: the generator runs
+    # the suite inside $( ), which forks, so $PPID is that subshell and killing
+    # it merely ends the command substitution -- the generator carries on and
+    # exits 0. The caller puts the generator in its OWN group via setsid, so the
+    # group is exactly the generator and its children, and this harness is not
+    # in it.
+    (( n == 2 )) && kill -9 0
+fi
+'''
+open(p, "w").write(s.replace(anchor, inject, 1))
+PY
+}
+
+# run_killed <dir> -> echoes "<rc> <before> <after>"
+run_killed() {
+    local d="$1" gen="$2" before after rc
+    instrument_kill_at_second_run "$d/test-push-guard.sh"
+    before="$(sha256sum "$d/push-guard.sh" | cut -d' ' -f1)"
+    G3_COUNTER="$d/.count" setsid --wait "$gen" --dir "$d" >/dev/null 2>&1; rc=$?
+    after="$(sha256sum "$d/push-guard.sh" | cut -d' ' -f1)"
+    printf '%s %s %s\n' "$rc" "$before" "$after"
+}
+
+g3="$(fixture killed)"
+read -r krc before after <<<"$(run_killed "$g3" "$GEN")"
+if (( krc != 0 )); then
+    ok g3-was-killed "generator died mid-mutation (exit $krc)"
+else
+    bad g3-was-killed "generator exited 0 -- the kill never landed, so the check below is vacuous"
+fi
+if [[ "$before" == "$after" ]]; then
+    ok g3-subject-intact "push-guard.sh byte-identical after the kill"
+else
+    bad g3-subject-intact "SUBJECT MUTATED AND STRANDED: $before -> $after"
+fi
+
+# PROVE THE NEEDLE BITES. Reconstruct the pre-fix mechanism -- mutate the source
+# in place, restore from an EXIT trap -- and put it through the identical kill.
+# If this does NOT strand a mutated file, g3-subject-intact is measuring nothing
+# and the isolation fix is unevidenced.
+g3o="$(fixture killed-inplace)"
+python3 - "$GEN" "$g3o/gen-inplace.sh" <<'PY'
+import sys
+s = open(sys.argv[1]).read()
+old = '''install -m 755 "$SRC_TARGET" "$WORK/push-guard.sh"
+install -m 755 "$SRC_SUITE"  "$WORK/test-push-guard.sh"
+TARGET="$WORK/push-guard.sh"
+SUITE="$WORK/test-push-guard.sh"
+BAK="$WORK/push-guard.sh.orig"
+cp "$TARGET" "$BAK"'''
+new = '''TARGET="$SRC_TARGET"
+SUITE="$SRC_SUITE"
+BAK="$WORK/push-guard.sh.orig"
+cp "$TARGET" "$BAK"
+trap 'cp "$BAK" "$TARGET"; rm -rf "$WORK"' EXIT'''
+assert s.count(old) == 1, "cannot reconstruct the in-place mechanism -- bite proof would be fake"
+open(sys.argv[2], "w").write(s.replace(old, new, 1))
+PY
+chmod +x "$g3o/gen-inplace.sh"
+read -r _orc obefore oafter <<<"$(run_killed "$g3o" "$g3o/gen-inplace.sh")"
+if [[ "$obefore" != "$oafter" ]]; then
+    ok g3-needle-bites "in-place generator strands a mutated subject, as it must"
+else
+    bad g3-needle-bites "the OLD mechanism also left the subject intact -- g3 is vacuous"
+fi
+
+echo
+echo "== g2: POSITIVE CONTROL -- a clean subject must produce a full green run =="
+g2="$(fixture clean)"
+out2="$("$GEN" --dir "$g2" 2>&1)"; rc2=$?
+if (( rc2 == 0 )) && [[ "$out2" == *"0 survived"* ]]; then
+    ok g2-control "$(printf '%s' "$out2" | grep -E '^[0-9]+ killed')"
+else
+    bad g2-control "wanted exit 0 with 0 survived; got rc=$rc2"
+fi
+# A kill must be attributed to a NAMED case, not to a bare tally -- that is the
+# fix for blocker 2 and it needs its own assertion.
+if [[ "$out2" == *"             by: "* ]]; then
+    ok g2-attributed "kills name the case they broke"
+else
+    bad g2-attributed "no per-mutant case attribution in the output"
+fi
+
+echo
+printf '%d passed, %d failed\n' "$PASS" "$FAIL"
+(( FAIL == 0 ))

packages/mosaic/framework/tools/git/test-pr-review-gitea-comment.sh

@@ -58,6 +58,9 @@ CREDENTIALS_FILE="$WORK_DIR/credentials.json"
 # A dedicated scratch dir the wrapper is pointed at via TMPDIR, so the leak
 # check can assert every POST/GET body + metadata temp file is cleaned up.
 TMP_SCRATCH="$WORK_DIR/scratch"
+# Sandboxed HOME so nothing under the real $HOME (notably the per-slot Gitea token
+# store at ~/.config/mosaic/secrets/gitea-tokens/) is reachable from the wrapper.
+HOME_DIR="$WORK_DIR/home"
 
 cleanup() {
     rm -rf "$WORK_DIR"
@@ -78,9 +81,18 @@ OVERRIDE_TOKEN="override-token-placeholder"
 CROSS_HOST_LOGIN="foreign-host-reviewer"
 CROSS_HOST_TOKEN="cross-host-token-placeholder"
 
-mkdir -p "$REPO_DIR" "$BIN_DIR" "$XDG_DIR" "$STATE_DIR" "$TMP_SCRATCH"
+mkdir -p "$REPO_DIR" "$BIN_DIR" "$XDG_DIR" "$STATE_DIR" "$TMP_SCRATCH" "$HOME_DIR"
 git -C "$REPO_DIR" init -q
 git -C "$REPO_DIR" remote add origin https://git.mosaicstack.dev/mosaicstack/stack.git
+# HERMETICITY: get_gitea_token() step 0 resolves a per-agent identity from
+# `git config --get mosaic.gitIdentity`, which on a provisioned agent seat is set
+# GLOBALLY and therefore leaks into this fresh repo. It then reads a REAL per-slot
+# token from $HOME and returns it WITHOUT ever consulting MOSAIC_CREDENTIALS_FILE,
+# so the fixture credentials below are silently ignored and the suite runs against
+# production credentials. An empty repo-local value shadows the global one and reads
+# back as empty at rc=0, restoring the shared-credential path this suite intends to
+# exercise. Paired with the sandboxed HOME in run_review().
+git -C "$REPO_DIR" config mosaic.gitIdentity ""
 
 # tea config: the override login carries its own token here. The default login
 # name ("mosaicstack") is deliberately absent, so the no-override default path
@@ -266,6 +278,24 @@ submitted = json.loads(os.environ["PR_REVIEW_PAYLOAD"])
 with open(state_path, encoding="utf-8") as handle:
     reviews = json.load(handle)
 
+# review-refused-422 (#1004): the server REFUSES the submit outright with a
+# definite, correct, machine-readable reason in the body — the shape Gitea
+# returns when the acting credential authored the PR. Nothing is created. The
+# wrapper must surface what the server said and must NOT relabel this as the
+# #865 silent-no-op defect class, which is precisely what it is not.
+if mode == "review-refused-422":
+    print("422")
+    print(json.dumps({"message": "Cannot approve your own pull request"}))
+    raise SystemExit(0)
+
+# review-refused-html (#1004): a non-JSON error body, as a fronting proxy or
+# gateway emits. The detail extraction must degrade to the first raw line rather
+# than silently dropping the only explanation available.
+if mode == "review-refused-html":
+    print("502")
+    print("<html><head><title>502 Bad Gateway</title></head>\n<body>nginx</body></html>")
+    raise SystemExit(0)
+
 # no-op-concurrent-review: the wrapper's own submit is SUPPRESSED (200, no
 # created object) even though a concurrent same-identity, same-state review at
 # the same head already exists. Nothing is persisted; no created id to verify.
@@ -517,6 +547,8 @@ run_review() {
         cd "$REPO_DIR"
         PATH="$BIN_DIR:$PATH" \
         TMPDIR="$TMP_SCRATCH" \
+        HOME="$HOME_DIR" \
+        MOSAIC_GIT_IDENTITY="" \
         XDG_CONFIG_HOME="$XDG_DIR" \
         MOSAIC_CREDENTIALS_FILE="$CREDENTIALS_FILE" \
         PR_REVIEW_TEA_LOG="$TEA_LOG" \
@@ -940,4 +972,44 @@ if grep -q 'Approved and verified' "$OUTPUT_FILE"; then
 fi
 assert_no_temp_leak "review-body-null"
 
+# Case 19 (#1004): an outright server REFUSAL must report the provider's own
+# reason and must NOT be relabelled as the #865 silent-no-op defect class. The
+# old arm hardcoded "(#865: no durable review created)" for EVERY non-2xx, so a
+# 422/403/404 — all of them definite, correct refusals the server explained in
+# the discarded body — arrived at the caller wearing the name of the one defect
+# they are not. That misdirection is what makes an operator re-issue the request
+# by hand against the live object to find out what actually happened.
+if run_review review-refused-422 approve; then
+    echo "FAIL: approve reported success when the server refused the submit" >&2
+    cat "$OUTPUT_FILE" >&2
+    exit 1
+fi
+grep -q 'HTTP 422' "$OUTPUT_FILE"
+if ! grep -q 'Cannot approve your own pull request' "$OUTPUT_FILE"; then
+    echo "FAIL: the provider's stated reason was discarded (#1004)" >&2
+    cat "$OUTPUT_FILE" >&2
+    exit 1
+fi
+if grep -q '#865: no durable review created' "$OUTPUT_FILE"; then
+    echo "FAIL: a server refusal was misattributed to the #865 defect class (#1004)" >&2
+    cat "$OUTPUT_FILE" >&2
+    exit 1
+fi
+assert_no_temp_leak "review-refused-422"
+
+# Case 20 (#1004): a non-JSON error body (a fronting proxy's HTML page) must
+# still yield something the caller can act on, rather than a bare status code.
+if run_review review-refused-html approve; then
+    echo "FAIL: approve reported success on a 502" >&2
+    cat "$OUTPUT_FILE" >&2
+    exit 1
+fi
+grep -q 'HTTP 502' "$OUTPUT_FILE"
+if ! grep -q '502 Bad Gateway' "$OUTPUT_FILE"; then
+    echo "FAIL: a non-JSON error body was dropped instead of degrading to its first line (#1004)" >&2
+    cat "$OUTPUT_FILE" >&2
+    exit 1
+fi
+assert_no_temp_leak "review-refused-html"
+
 echo "pr-review.sh REST review + comment create/read-back regression passed"

packages/mosaic/framework/tools/git/test-push-guard.sh

@@ -0,0 +1,659 @@
+#!/usr/bin/env bash
+# test-push-guard.sh - Needle harness for push-guard.sh.
+#
+# Every check gets BOTH polarities:
+#   NEEDLE   a deliberately-broken fixture that MUST trip the guard.
+#   CONTROL  a clean fixture that MUST pass.
+#
+# The controls are not decoration. A guard that failed unconditionally would
+# satisfy every needle and look fully covered — which is the same class of defect
+# (an assertion satisfied by the null case) that push-guard.sh exists to prevent.
+# A needle set without controls cannot tell "working guard" from "broken guard".
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+GUARD="$SCRIPT_DIR/push-guard.sh"
+WORK_DIR="${MOSAIC_TEST_WORK_DIR:-$SCRIPT_DIR/.work}"
+
+PASS=0
+FAIL=0
+
+# Fresh repo + bare "remote" for each case, so no case can inherit another's state.
+new_repo() {
+    local name="$1"
+    local dir="$WORK_DIR/$name"
+    rm -rf "$dir"
+    mkdir -p "$dir"
+    git init -q -b main "$dir/repo"
+    git init -q --bare "$dir/remote.git"
+    git -C "$dir/repo" remote add origin "$dir/remote.git"
+    git -C "$dir/repo" config user.name "Needle Harness"
+    git -C "$dir/repo" config user.email "[email protected]"
+    printf 'seed\n' > "$dir/repo/seed.txt"
+    git -C "$dir/repo" add seed.txt
+    git -C "$dir/repo" commit -q -m "seed"
+    printf '%s' "$dir/repo"
+}
+
+# write_config <repo> <json-text>
+#
+# THIS HELPER USED TO WRITE THE CONFIG UNTRACKED, and the comment that lived here
+# justified it ("does not need to be staged"). That made every opt-out control in
+# this file assert the FORBIDDEN provenance and pass — a control that does not
+# merely test nothing, but tests the OPPOSITE of the requirement and goes green.
+# The whole design is: ON from anywhere, OFF only from a committed reviewable
+# artifact. A harness that opts out from an untracked file was proving the bypass
+# worked. It now COMMITS, so the opt-out controls exercise the supported path.
+write_config() {
+    printf '%s\n' "$2" > "$1/.push-guard.json"
+    git -C "$1" add .push-guard.json
+    git -C "$1" commit -q -m "push-guard config"
+}
+
+# write_config_untracked <repo> <json-text>
+# Deliberately NOT committed — used only where the untracked config is the thing
+# under test and the expected outcome is a REFUSAL.
+write_config_untracked() {
+    printf '%s\n' "$2" > "$1/.push-guard.json"
+}
+
+# expect <kind> <expected_exit> <description> [--out <substring>] -- <command...>
+#
+# --out asserts a substring of the guard's own output. It exists because exit 0
+# alone cannot distinguish "checked the files and they were fine" from "matched
+# no files and had nothing to check". Two controls in an earlier revision of this
+# harness were passing vacuously for exactly that reason — the pathspec silently
+# matched nothing. A control that cannot fail is not a control.
+expect() {
+    local kind="$1" want="$2" desc="$3"; shift 3
+    local need_out=""
+    while (( $# )); do
+        case "$1" in
+            --out) need_out="$2"; shift 2 ;;
+            --)    shift; break ;;
+            *)     break ;;
+        esac
+    done
+    local got=0 out
+    out="$("$@" 2>&1)" || got=$?
+
+    local why=""
+    [[ "$got" == "$want" ]] || why="wanted exit $want, got $got"
+    if [[ -z "$why" && -n "$need_out" && "$out" != *"$need_out"* ]]; then
+        why="exit $got as expected, but output never said: $need_out"
+    fi
+
+    if [[ -z "$why" ]]; then
+        printf '  PASS  [%-7s] %s (exit %s)\n' "$kind" "$desc" "$got"
+        PASS=$((PASS + 1))
+    else
+        printf '  FAIL  [%-7s] %s — %s\n' "$kind" "$desc" "$why"
+        printf '%s\n' "$out" | sed 's/^/          | /'
+        FAIL=$((FAIL + 1))
+    fi
+}
+
+rm -rf "$WORK_DIR"
+mkdir -p "$WORK_DIR"
+
+echo "=== (a) conflict markers / unmerged index ==="
+
+# NEEDLE: staged content carrying real conflict markers.
+R="$(new_repo a1)"
+cat > "$R/conflicted.txt" <<'EOF'
+intro line
+<<<<<<< HEAD
+ours
+=======
+theirs
+>>>>>>> feature/x
+tail line
+EOF
+git -C "$R" add conflicted.txt
+expect NEEDLE 2 "staged conflict markers are refused" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: a genuine unmerged index (merge in progress).
+R="$(new_repo a2)"
+git -C "$R" checkout -q -b other
+printf 'from-other\n' > "$R/clash.txt"
+git -C "$R" add clash.txt && git -C "$R" commit -q -m other
+git -C "$R" checkout -q main
+printf 'from-main\n' > "$R/clash.txt"
+git -C "$R" add clash.txt && git -C "$R" commit -q -m main
+git -C "$R" merge other -q >/dev/null 2>&1 || true
+expect NEEDLE 2 "unmerged index paths are refused" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: ordinary staged content passes.
+# The config is REQUIRED as of the decision gate: this fixture has no generated
+# JSON, so it records that fact with a reason. This is the migration cost of the
+# hard cutover, paid here first — these two controls were the only pre-existing
+# cases that reached the JSON stage without nominating a path, and they are
+# exactly the "repo that never wired it up" the gate now refuses.
+R="$(new_repo a3)"
+write_config "$R" '{"json_check": "none", "reason": "fixture has no generated JSON"}'
+printf 'just some code\n' > "$R/clean.txt"
+git -C "$R" add clean.txt
+expect CONTROL 0 "clean staged content passes (1 file actually scanned)" \
+    --out "no conflict markers in 1 staged file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL (false-positive guard): prose using ======= as an underline must NOT trip.
+# This is why the marker pattern deliberately ignores a bare '======='.
+R="$(new_repo a4)"
+write_config "$R" '{"json_check": "none", "reason": "fixture has no generated JSON"}'
+cat > "$R/README.rst" <<'EOF'
+Section Title
+=============
+
+Body text.
+
+Another Heading
+=======
+EOF
+git -C "$R" add README.rst
+expect CONTROL 0 "prose using ======= underlines does not trip the guard" \
+    --out "no conflict markers in 1 staged file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE (fault injection): if the scan itself ERRORS, the guard must refuse
+# rather than report a clean result. git grep exits 1 for "no match" but >=2 for
+# a real failure; a blanket '|| true' would collapse the two. We inject the
+# failure with a PATH shim rather than trying to corrupt an index.
+R="$(new_repo a5)"
+SHIM="$WORK_DIR/a5/bin"
+mkdir -p "$SHIM"
+REAL_GIT="$(command -v git)"
+cat > "$SHIM/git" <<SH
+#!/usr/bin/env bash
+if [[ "\$1" == "grep" ]]; then exit 2; fi
+exec "$REAL_GIT" "\$@"
+SH
+chmod +x "$SHIM/git"
+printf 'ordinary content\n' > "$R/thing.txt"
+git -C "$R" add thing.txt
+expect NEEDLE 2 "a conflict scan that ERRORS is refused, not reported clean" \
+    --out "did not run" -- \
+    bash -c "cd '$R' && export PATH=\"$SHIM:\$PATH\" && '$GUARD' check-staged"
+
+# NEEDLE: RENAME + MODIFY. Git reports a `git mv` plus a small edit as a single
+# 'R' entry, which --diff-filter=ACM does not match, making the file invisible to
+# every content check. A clean file is co-staged deliberately: without it the
+# file list is empty and the nothing-staged guard fires by ACCIDENT, which would
+# make this needle pass for the wrong reason and hide the real defect.
+R="$(new_repo a6)"
+mkdir -p "$R/data"
+seq 1 200 | sed 's/^/line /' > "$R/data/canon.txt"
+printf 'original\n' > "$R/other.txt"
+git -C "$R" add -A && git -C "$R" commit -q -m seed
+git -C "$R" mv data/canon.txt data/canon2.txt
+printf '<<<<<<< HEAD\nours\n=======\ntheirs\n>>>>>>> b\n' >> "$R/data/canon2.txt"
+printf 'an ordinary innocent change\n' > "$R/other.txt"
+git -C "$R" add -A
+expect NEEDLE 2 "conflict markers in a RENAMED file are refused (rename+modify)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: a path marked binary in .gitattributes. `git grep -I` honours that
+# classification and skips the blob entirely while the summary still counts the
+# file as scanned — a clean pass AND a false count. Hence -a, not -I.
+R="$(new_repo a7)"
+printf 'notes.txt binary\n' > "$R/.gitattributes"
+printf 'x\n<<<<<<< HEAD\nours\n=======\ntheirs\n>>>>>>> b\ny\n' > "$R/notes.txt"
+git -C "$R" add -A
+expect NEEDLE 2 "conflict markers in a .gitattributes-binary file are refused" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+echo "=== (c) staged JSON parses ==="
+
+# NEEDLE: malformed JSON, the shape a broken generator emits.
+R="$(new_repo c1)"
+mkdir -p "$R/data"
+printf '{"a": 1,\n' > "$R/data/broken.json"
+git -C "$R" add data/broken.json
+expect NEEDLE 3 "staged unparseable JSON under --json-path is refused" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/**/*.json'"
+
+# NEEDLE: conflict markers inside a generated JSON file — the 70-file incident.
+R="$(new_repo c2)"
+mkdir -p "$R/data"
+cat > "$R/data/canon.json" <<'EOF'
+{
+<<<<<<< HEAD
+  "v": 1
+=======
+  "v": 2
+>>>>>>> main
+}
+EOF
+git -C "$R" add data/canon.json
+expect NEEDLE 2 "conflict markers in generated JSON are refused" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: valid JSON passes.
+R="$(new_repo c3)"
+mkdir -p "$R/data"
+printf '{"a": 1, "b": [2, 3]}\n' > "$R/data/good.json"
+git -C "$R" add data/good.json
+expect CONTROL 0 "valid staged JSON passes (and was actually parsed)" \
+    --out "1 staged .json file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/**/*.json'"
+
+# CONTROL: an explicit exemption works (and is reported, never silent).
+R="$(new_repo c4)"
+mkdir -p "$R/fixtures"
+printf 'not json at all' > "$R/fixtures/malformed.json"
+git -C "$R" add fixtures/malformed.json
+expect CONTROL 0 "deliberate malformed fixture can be exempted (exemption announced)" \
+    --out "EXEMPTED by --allow-invalid-json" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'fixtures/*' --allow-invalid-json 'fixtures/*'"
+
+# CONTROL (false-positive regression): JSONC is the common real-world case.
+# tsconfig.json legally carries comments and does NOT parse strictly. Measured on
+# a real repo: 17 of 119 tracked .json files are like this. An on-by-default
+# check would fire on all of them; scoping by --json-path is what prevents it.
+R="$(new_repo c5)"
+cat > "$R/tsconfig.json" <<'EOF'
+{
+  // JSONC: comments are legal here and strict json.load() rejects them.
+  "compilerOptions": { "strict": true }
+}
+EOF
+mkdir -p "$R/data"
+printf '{"generated": true}\n' > "$R/data/view.json"
+git -C "$R" add tsconfig.json data/view.json
+expect CONTROL 0 "JSONC outside --json-path does not trip the JSON check" \
+    --out "1 staged .json file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/**/*.json'"
+
+# NEEDLE: the same tsconfig DOES fail if someone wrongly nominates it, proving
+# the check is genuinely running and the control above is not a vacuous pass.
+expect NEEDLE 3 "the same JSONC file fails when explicitly nominated" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'tsconfig.json'"
+
+echo "=== (d) the JSON decision is MANDATORY (.push-guard.json) ==="
+
+# NEEDLE: the fail-open this gate closes. No --json-path, no config: the previous
+# release printed "JSON check NOT REQUESTED" and exited 0, leaving the repo
+# unprotected forever with nothing ever failing.
+R="$(new_repo d1)"
+printf '{"a": 1}\n' > "$R/thing.json"
+git -C "$R" add thing.json
+expect NEEDLE 6 "no --json-path and no config is REFUSED (the closed fail-open)" \
+    --out "NO JSON DECISION" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: config nominates paths, and the check genuinely runs off it.
+R="$(new_repo d2)"
+write_config "$R" '{"json_paths": ["data/**/*.json"]}'
+mkdir -p "$R/data"
+printf '{"a": 1,\n' > "$R/data/broken.json"
+git -C "$R" add data/broken.json
+expect NEEDLE 3 "broken JSON is caught via config-supplied json_paths" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: opt-out WITHOUT a reason. An unexplained opt-out is the absence again,
+# merely relocated into a file.
+R="$(new_repo d3)"
+write_config "$R" '{"json_check": "none"}'
+printf 'code\n' > "$R/x.txt"
+git -C "$R" add x.txt
+expect NEEDLE 6 "json_check:none without a reason is refused" \
+    --out "REQUIRES a non-empty" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: malformed config must REFUSE, never fall back to "treat as absent".
+# That fallback would mean a typo silently disables the check the file enables.
+R="$(new_repo d4)"
+write_config "$R" '{"json_paths": ["data/**/*.json",'
+printf 'code\n' > "$R/x.txt"
+git -C "$R" add x.txt
+expect NEEDLE 6 "an unparseable config is refused, not treated as absent" \
+    --out "INVALID" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: a config that parses but states NO decision. Distinct from malformed —
+# this one is valid JSON and still says nothing, which is the original defect
+# wearing a config file as a disguise.
+R="$(new_repo d5)"
+write_config "$R" '{}'
+printf 'code\n' > "$R/x.txt"
+git -C "$R" add x.txt
+expect NEEDLE 6 "a valid config that states no decision is refused" \
+    --out "states no decision" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# NEEDLE: a bogus json_check value must not be read as an opt-out.
+R="$(new_repo d6)"
+write_config "$R" '{"json_check": "off", "reason": "typo for none"}'
+printf 'code\n' > "$R/x.txt"
+git -C "$R" add x.txt
+expect NEEDLE 6 'json_check with an unrecognised value is refused' \
+    --out 'must be "none"' -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: config nominates paths, JSON is clean.
+# --out is REQUIRED. Exit 0 alone cannot distinguish "read the config, resolved
+# the paths, parsed the files" from "matched nothing and had nothing to do" —
+# the vacuous-control trap that already caught this harness once.
+R="$(new_repo d7)"
+write_config "$R" '{"json_paths": ["data/**/*.json"]}'
+mkdir -p "$R/data"
+printf '{"generated": true}\n' > "$R/data/view.json"
+git -C "$R" add data/view.json
+expect CONTROL 0 "config-supplied json_paths pass and are reported as parsed" \
+    --out "1 staged .json file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: a recorded opt-out passes AND the reason is echoed. Asserting on the
+# reason is the whole point — an opt-out nobody can see is what we just removed.
+R="$(new_repo d8)"
+write_config "$R" '{"json_check": "none", "reason": "no generated JSON in this repo"}'
+printf 'code\n' > "$R/x.txt"
+git -C "$R" add x.txt
+expect CONTROL 0 "a recorded opt-out passes and PRINTS its reason" \
+    --out "recorded reason: no generated JSON in this repo" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: config-supplied exemptions still work through the config path.
+R="$(new_repo d9)"
+write_config "$R" '{"json_paths": ["fixtures/*"], "allow_invalid_json": ["fixtures/*"]}'
+mkdir -p "$R/fixtures"
+printf 'not json at all' > "$R/fixtures/malformed.json"
+git -C "$R" add fixtures/malformed.json
+expect CONTROL 0 "config-supplied allow_invalid_json exempts (and announces it)" \
+    --out "EXEMPTED by --allow-invalid-json" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: --json-path alone still satisfies the decision, with no config at all.
+# This is what keeps every pre-existing caller working: nominating a path IS an
+# explicit decision. Only saying nothing is refused.
+R="$(new_repo d10)"
+mkdir -p "$R/data"
+printf '{"a": 1}\n' > "$R/data/good.json"
+git -C "$R" add data/good.json
+expect CONTROL 0 "--json-path alone satisfies the decision with no config present" \
+    --out "1 staged .json file(s)" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/**/*.json'"
+
+# NEEDLE: a CLI nomination must WIN over a config opt-out, loudly. Resolving a
+# contradiction toward more checking is the only safe direction, but doing it
+# silently would hide a genuine disagreement between caller and repo.
+R="$(new_repo d11)"
+write_config "$R" '{"json_check": "none", "reason": "claims no generated JSON"}'
+mkdir -p "$R/data"
+printf '{"a": 1,\n' > "$R/data/broken.json"
+git -C "$R" add data/broken.json
+expect NEEDLE 3 "--json-path overrides a config opt-out and still catches bad JSON" \
+    --out "honouring the nomination" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/**/*.json'"
+
+echo "=== (z) the guard itself emits no stray output ==="
+
+# CONTROL: the guard must not print interpreter warnings.
+#
+# This case exists because a real one shipped: the config parser was an inline
+# `<<'PY'` heredoc inside a $( ) command substitution, so bash printed
+#   warning: command substitution: 1 unterminated here-document
+# on EVERY run. Thirty needles and a clean shellcheck all missed it — the
+# warning went to stderr, and no assertion in this harness looked at output it
+# had not already been told to expect. It was found only by running the guard
+# against a real repository.
+#
+# The lesson is narrow and worth encoding: asserting on what you EXPECT to see
+# cannot detect what you never thought to look for. This asserts on the absence
+# of a whole output class instead.
+R="$(new_repo z1)"
+write_config "$R" '{"json_paths": ["data/**/*.json"]}'
+mkdir -p "$R/data"
+printf '{"a": 1}\n' > "$R/data/view.json"
+git -C "$R" add data/view.json
+z_out="$(cd "$R" && "$GUARD" check-staged 2>&1)"
+if grep -qiE 'warning:|unterminated|command substitution' <<<"$z_out"; then
+    printf '  FAIL  [%-7s] %s\n' "CONTROL" "guard emits interpreter warnings"
+    printf '%s\n' "$z_out" | sed 's/^/          | /'
+    FAIL=$((FAIL + 1))
+else
+    printf '  PASS  [%-7s] %s\n' "CONTROL" "guard runs without emitting any interpreter warning"
+    PASS=$((PASS + 1))
+fi
+
+# NEEDLE for the case above: prove the detector can actually fire, otherwise it
+# is one more assertion that passes because it looked at nothing.
+if grep -qiE 'warning:|unterminated|command substitution' \
+        <<<"bash: warning: command substitution: 1 unterminated here-document"; then
+    printf '  PASS  [%-7s] %s\n' "NEEDLE" "the warning detector fires on a known warning string"
+    PASS=$((PASS + 1))
+else
+    printf '  FAIL  [%-7s] %s\n' "NEEDLE" "the warning detector is dead — it cannot fire"
+    FAIL=$((FAIL + 1))
+fi
+
+echo "=== null case: nothing staged ==="
+
+# NEEDLE: the index equals HEAD. Committing here produces the empty commit.
+R="$(new_repo n1)"
+expect NEEDLE 5 "empty index is refused before a commit happens" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+echo "=== (b) push actually happened ==="
+
+# CONTROL: a real push that moves the remote.
+R="$(new_repo b1)"
+printf 'work\n' > "$R/work.txt"
+git -C "$R" add work.txt && git -C "$R" commit -q -m "real work"
+expect CONTROL 0 "a push that moves the remote is confirmed" \
+    --out "PUSH CONFIRMED" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch main"
+
+# NEEDLE: THE ORIGINAL FALSE POSITIVE. Remote already equals local HEAD, so the
+# naive 'remote == local' assertion succeeds while nothing is transferred.
+R="$(new_repo b2)"
+printf 'work\n' > "$R/work.txt"
+git -C "$R" add work.txt && git -C "$R" commit -q -m "real work"
+git -C "$R" push -q origin HEAD:refs/heads/main
+expect NEEDLE 4 "second push transferring nothing is refused (remote did not move)" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch main"
+
+# NEEDLE: the commit step aborted, so HEAD never advanced.
+R="$(new_repo b3)"
+HEAD_BEFORE="$(git -C "$R" rev-parse HEAD)"
+expect NEEDLE 5 "push after an aborted commit is refused (HEAD did not advance)" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch main --since-head '$HEAD_BEFORE'"
+
+# NEEDLE: an empty commit carrying a real message.
+R="$(new_repo b4)"
+git -C "$R" commit -q --allow-empty -m "feat: important-sounding message"
+expect NEEDLE 5 "pushing an empty commit is refused" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch main"
+
+# CONTROL: --since-head is satisfied when a real commit was made.
+R="$(new_repo b5)"
+HEAD_BEFORE="$(git -C "$R" rev-parse HEAD)"
+printf 'work\n' > "$R/work.txt"
+git -C "$R" add work.txt && git -C "$R" commit -q -m "real work"
+# --out is required here. Without it this control is VACUOUS: deleting the whole
+# --since-head validation block would still yield exit 0, because the empty-commit
+# and remote-moved checks independently succeed. It would prove nothing about the
+# code path it names.
+expect CONTROL 0 "--since-head passes when a real commit was created" \
+    --out "HEAD advanced" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch main --since-head '$HEAD_BEFORE'"
+
+# ---------------------------------------------------------------------------
+# Needles for the five blockers rev-974 found from a clean checkout. Every one
+# of these was reproduced before it was fixed; none is a hypothesis.
+# ---------------------------------------------------------------------------
+
+echo
+echo "-- blocker 2: the enumerating producer's exit status --"
+# FAULT INJECTION. mapfile < <(git diff) reported MAPFILE's status, so a git diff
+# that died returned zero files and the guard published that silence as clean.
+R="$(new_repo e1)"
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect NEEDLE 6 "a failed file enumeration REFUSES instead of reporting clean" \
+    --out "CANNOT ENUMERATE STAGED FILES" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path ':(this-magic-does-not-exist)data/*.json'"
+# CONTROL: the same malformed file with a WORKING pathspec must still be caught,
+# so the needle above is not passing merely because everything now refuses.
+expect CONTROL 3 "a working pathspec still catches the malformed JSON" \
+    --out "data/bad.json" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged --json-path 'data/*.json'"
+
+echo
+echo "-- blocker 3: OFF must come from a committed, reviewable object --"
+R="$(new_repo e2)"
+write_config_untracked "$R" '{"json_check": "none", "reason": "local unreviewed bypass"}'
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+# The anchor is the DISTINGUISHING clause, not the shared headline. Three
+# separate branches print "OPT-OUT IS NOT REVIEWABLE" — untracked, staged-not-
+# committed, and symlink. Anchoring on the headline means this needle stays green
+# if the untracked branch is deleted and control falls through to a SIBLING that
+# prints the same words: a substring anchor does not fail when its subject is
+# removed, IT RE-POINTS. Anchor on the clause only this branch can produce.
+expect NEEDLE 6 "an UNTRACKED opt-out is refused as unreviewable" \
+    --out "is not tracked in git" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# STAGED BUT NOT COMMITTED. Found by mutation, not by review: `if [[ -z "$cmode" ]]`
+# survived `if false` against a 44/44 green suite, because no case ever built this
+# state. Note the mutant still exits 6 — control falls to the LOCAL-ONLY branch
+# below and refuses for a different reason. An exit-code-only assertion here would
+# be satisfied by the wrong branch, which is why --out carries the distinguishing
+# clause. `git add` puts the file in the index, so ls-files matches while HEAD
+# does not: staged review is not review.
+R="$(new_repo e2b)"
+write_config_untracked "$R" '{"json_check": "none", "reason": "staged, never committed"}'
+git -C "$R" add .push-guard.json
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect NEEDLE 6 "a STAGED-but-uncommitted opt-out is refused" \
+    --out "staged but not yet in HEAD" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# COMMITTED CONFIG DOES NOT PARSE while the working tree opts out cleanly. Also a
+# mutation survivor. The working-tree config is valid, so the early config check
+# passes and we reach the re-read; the committed object is what fails. Without
+# this branch an opt-out could be honoured on the strength of a HEAD blob nobody
+# can actually read a decision out of.
+R="$(new_repo e2c)"
+write_config "$R" '{ this is not json'
+printf '%s\n' '{"json_check": "none", "reason": "valid here, broken in HEAD"}' > "$R/.push-guard.json"
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect NEEDLE 6 "an UNPARSEABLE committed config cannot authorise an opt-out" \
+    --out "is INVALID" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# A committed ON silently flipped OFF in the working tree is the same bypass.
+R="$(new_repo e3)"
+write_config "$R" '{"json_paths": ["data/**/*.json"]}'
+printf '%s\n' '{"json_check": "none", "reason": "local convenience"}' > "$R/.push-guard.json"
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect NEEDLE 6 "a committed ON flipped OFF in the working tree is refused" \
+    --out "LOCAL-ONLY OPT-OUT" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# A committed SYMLINK is a mutable target: the reviewed blob is a path, and what
+# it points at can change with no diff at all.
+R="$(new_repo e4)"
+printf '%s\n' '{"json_check": "none", "reason": "via symlink"}' > "$R/real-config.json"
+ln -s real-config.json "$R/.push-guard.json"
+git -C "$R" add real-config.json .push-guard.json
+git -C "$R" commit -q -m "symlinked config"
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect NEEDLE 6 "a committed SYMLINK config is refused as a mutable target" \
+    --out "committed SYMLINK" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+# CONTROL: the supported path still works. Without this the whole opt-out feature
+# could be dead and every needle above would still pass — a gate that can never
+# say yes is not a gate.
+R="$(new_repo e5)"
+write_config "$R" '{"json_check": "none", "reason": "committed and reviewable"}'
+mkdir -p "$R/data"; printf '{ not json' > "$R/data/bad.json"
+git -C "$R" add -f data/bad.json
+expect CONTROL 0 "a COMMITTED opt-out is honoured and prints its committed reason" \
+    --out "recorded reason: committed and reviewable" -- \
+    bash -c "cd '$R' && '$GUARD' check-staged"
+
+echo
+echo "-- blocker 4: advancement is ancestry, not inequality --"
+R="$(new_repo e6)"
+git -C "$R" checkout -qb other
+printf 'o\n' > "$R/o.txt"; git -C "$R" add o.txt; git -C "$R" commit -q -m o
+OTHER="$(git -C "$R" rev-parse HEAD)"
+git -C "$R" checkout -q main 2>/dev/null || git -C "$R" checkout -q master
+printf 'm\n' > "$R/m.txt"; git -C "$R" add m.txt; git -C "$R" commit -q -m m
+MAINH="$(git -C "$R" rev-parse HEAD)"
+git -C "$R" checkout -q "$OTHER"
+expect NEEDLE 5 "a checkout of pre-existing diverged history is not 'advancement'" \
+    --out "NOT A DESCENDANT" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch other --since-head '$MAINH'"
+
+echo
+echo "-- blocker 5: root and merge commits have defined emptiness --"
+R="$(new_repo e7)"
+git -C "$R" checkout -q --orphan fresh
+git -C "$R" rm -q -rf . >/dev/null 2>&1 || true
+git -C "$R" commit -q --allow-empty -m "empty root"
+expect NEEDLE 5 "an EMPTY ROOT commit is refused, not exempted" \
+    --out "EMPTY ROOT COMMIT" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch fresh"
+
+# CONTROL: a real root commit must still push, or the fix is just a new wall.
+R="$(new_repo e8)"
+git -C "$R" checkout -q --orphan fresh2
+git -C "$R" rm -q -rf . >/dev/null 2>&1 || true
+printf 'real\n' > "$R/real.txt"; git -C "$R" add real.txt
+git -C "$R" commit -q -m "real root"
+expect CONTROL 0 "a NON-empty root commit still pushes" \
+    --out "non-empty root commit" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch fresh2"
+
+# THE MERGE BRANCH HAD NO NEEDLE AT ALL. It was defined, hand-verified, and
+# shipped -- and deleting the refusal left the suite at 41/41 green. Defining
+# semantics is not testing them, and an untested branch is indistinguishable
+# from an absent one to everyone downstream.
+# EMPTY MERGE: two branches that each change nothing, merged. The merge tree is
+# then identical to EVERY parent -- it integrates nothing and introduces nothing.
+R="$(new_repo e9)"
+git -C "$R" checkout -q -b mx
+git -C "$R" commit -q --allow-empty -m "x: no tree change"
+git -C "$R" checkout -q -b my HEAD~1 2>/dev/null || git -C "$R" checkout -q -b my
+git -C "$R" commit -q --allow-empty -m "y: no tree change"
+git -C "$R" checkout -q mx
+git -C "$R" merge -q --no-ff --no-edit my
+# PROVE THE FIXTURE IS ACTUALLY AN EMPTY MERGE before asserting on it, or the
+# needle passes for the wrong reason on a repo that never made a merge at all.
+np="$(git -C "$R" rev-list --parents -n 1 HEAD | wc -w)"
+if (( np > 2 )) && git -C "$R" diff --quiet HEAD^1 HEAD && git -C "$R" diff --quiet HEAD^2 HEAD; then
+    printf '  ok    [%-14s] fixture is a merge (%d fields) with tree identical to both parents\n' "e9-fixture" "$np"; PASS=$(( PASS + 1 ))
+else
+    printf '  FAIL  [%-14s] fixture is not an empty merge -- needle would be vacuous\n' "e9-fixture"; FAIL=$(( FAIL + 1 ))
+fi
+expect NEEDLE 5 "an EMPTY MERGE is refused, not exempted" \
+    --out "EMPTY MERGE" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch mx"
+
+# CONTROL: a merge that really integrates must still push. Both sides add a
+# distinct file, so the merge tree differs from BOTH parents.
+R="$(new_repo e10)"
+git -C "$R" checkout -q -b nx
+printf 'from x\n' > "$R/x.txt"; git -C "$R" add x.txt; git -C "$R" commit -q -m "x adds a file"
+git -C "$R" checkout -q -b ny HEAD~1
+printf 'from y\n' > "$R/y.txt"; git -C "$R" add y.txt; git -C "$R" commit -q -m "y adds a file"
+git -C "$R" checkout -q nx
+git -C "$R" merge -q --no-ff --no-edit ny
+expect CONTROL 0 "a NON-empty merge commit still pushes" \
+    --out "non-empty merge commit" -- \
+    bash -c "cd '$R' && '$GUARD' push --remote origin --branch nx"
+
+echo
+printf 'push-guard needles: %d passed, %d failed\n' "$PASS" "$FAIL"
+(( FAIL == 0 )) || exit 1

packages/mosaic/framework/tools/git/test-verify-clean-clone.sh

@@ -0,0 +1,144 @@
+#!/usr/bin/env bash
+# test-verify-clean-clone.sh -- needles for the verifier itself.
+#
+# v1 of the verifier passed while the real repository recorded 100644, because it
+# asserted a SCRATCH repo built by cp. There was no needle that could have caught
+# that: every case ran against a tree whose modes came off my filesystem.
+# So the load-bearing needle here is w2 -- SOURCE GIT MODE 100644, DISK MODE 755.
+# That is the exact contaminated state, and v1 exits 0 on it while v2 must refuse.
+# A verifier without this needle is the same shape as the defect it verifies.
+
+set -uo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+VERIFY="$HERE/verify-clean-clone.sh"
+ARTIFACTS=(push-guard.sh test-push-guard.sh verify-clean-clone.sh mutate-push-guard.sh
+           test-mutate-push-guard.sh
+           test-verify-clean-clone.sh)
+
+# THE REAL DEPLOYED LAYOUT. Every fixture in the first version of this file
+# installed the artifacts at the fixture ROOT, so 6/6 green proved flat-layout
+# operation and said NOTHING about the path these files actually ship at. The
+# verifier was unusable in place and the suite could not see it, because THE
+# FIXTURE ENCODED A LAYOUT THAT DOES NOT EXIST. A fixture is a claim about the
+# world; an untested fixture is an unreviewed one.
+readonly REAL_PREFIX="packages/mosaic/framework/tools/git"
+
+PASS=0; FAIL=0
+TMP="$(mktemp -d)"; trap 'rm -rf "$TMP"' EXIT
+
+# Build a source repo whose COMMITTED modes are 100755 and whose disk modes are
+# executable -- the honest state.
+# mkrepo <repo-root> [subdir]
+# With a subdir the artifacts are committed at repo/<subdir>/, which is how they
+# really ship. Echoes the directory the artifacts landed in -- that is what gets
+# passed as --repo, so the caller never has to reconstruct the path.
+mkrepo() {
+    local d="$1" sub="${2:-}"
+    local dest="$d${sub:+/$sub}"
+    mkdir -p "$dest"
+    local f
+    for f in "${ARTIFACTS[@]}"; do
+        install -m 755 "$HERE/$f" "$dest/$f"
+    done
+    git -C "$d" init -q .
+    git -C "$d" config user.email "[email protected]"
+    git -C "$d" config user.name "Verifier Needles"
+    git -C "$d" add -A
+    git -C "$d" commit -q -m "artifacts"
+    printf '%s\n' "$dest"
+}
+
+run_case() {
+    local name="$1" want_rc="$2" want_txt="$3" repo="$4"
+    local out rc
+    out="$("$VERIFY" --repo "$repo" 2>&1)"; rc=$?
+    if (( rc == want_rc )) && [[ "$out" == *"$want_txt"* ]]; then
+        printf '  ok    [%-14s]\n' "$name"; PASS=$(( PASS + 1 ))
+    else
+        printf '  FAIL  [%-14s] wanted rc=%d containing %q; got rc=%d\n%s\n' \
+            "$name" "$want_rc" "$want_txt" "$rc" "$out"; FAIL=$(( FAIL + 1 ))
+    fi
+}
+
+echo "== POSITIVE CONTROL: an honestly-committed artifact must PASS =="
+# Without this, every case below could be passing because the verifier always
+# refuses -- a wall, not a gate.
+mkrepo "$TMP/good" >/dev/null
+run_case w1-honest 0 "the COMMITTED artifact ran and passed" "$TMP/good"
+
+echo
+echo "== THE DEPLOYED LAYOUT: artifacts NESTED, not at the repository root =="
+# The blocker: ls-tree was given a bare basename, which is a ROOT-relative
+# pathspec, so in the real tree every artifact came back NOT TRACKED and the
+# verifier refused to run at all. This control fails against that version and
+# passes only when the committed PREFIX is threaded through ls-tree, the cloned
+# stat, and the suite's working directory.
+w6dir="$(mkrepo "$TMP/nested" "$REAL_PREFIX")"
+run_case w6-nested 0 "the COMMITTED artifact ran and passed" "$w6dir"
+# ...and prove the run actually happened DOWN THERE rather than at the root, or
+# a passing w6 would only mean the prefix was ignored harmlessly.
+#
+# Captured into a variable rather than piped into `grep -q` ON PURPOSE. grep -q
+# exits at the FIRST match, the verifier then dies of SIGPIPE, and under
+# `pipefail` the pipeline reports that 141 -- so A SUCCESSFUL MATCH READS AS A
+# FAILED ASSERTION. This cost me a red w6-prefix against a verifier that was
+# printing the right prefix all along. Same family as the pipefail/process-
+# substitution note already on record: the exit status being consulted is not
+# the status of the thing being asserted.
+w6out="$("$VERIFY" --repo "$w6dir" 2>&1)"
+if [[ "$w6out" == *"prefix $REAL_PREFIX/"* ]]; then
+    printf '  ok    [%-14s] verifier reported prefix %s/\n' "w6-prefix" "$REAL_PREFIX"; PASS=$(( PASS + 1 ))
+else
+    printf '  FAIL  [%-14s] verifier did not report the nested prefix -- it may have\n' "w6-prefix"
+    printf '        passed by looking at the root, which is the blocker unfixed\n'; FAIL=$(( FAIL + 1 ))
+fi
+# And the mode needle must ALSO bite in the nested layout: a prefix threaded
+# into the clone but not into ls-tree would silently stop checking modes.
+w7dir="$(mkrepo "$TMP/nested-laundered" "$REAL_PREFIX")"
+git -C "$TMP/nested-laundered" update-index --chmod=-x "$REAL_PREFIX/push-guard.sh"
+git -C "$TMP/nested-laundered" commit -q -m "drop exec bit in git only"
+run_case w7-nested-mode 1 "committed 100644, needs 100755" "$w7dir"
+
+echo
+echo "== THE B1 NEEDLE: source git mode 100644, DISK MODE STILL 755 =="
+# This is the reviewer's exact reproduction. v1 of the verifier exits 0 here.
+mkrepo "$TMP/laundered" >/dev/null
+git -C "$TMP/laundered" update-index --chmod=-x push-guard.sh test-push-guard.sh
+git -C "$TMP/laundered" commit -q -m "drop exec bit in git only"
+# PROVE THE FIXTURE IS THE CONTAMINATED STATE, not merely a broken repo: git must
+# say 100644 while the filesystem still says executable. If the disk bit were
+# gone too, the needle would be testing something easier than the real defect.
+src_mode="$(git -C "$TMP/laundered" ls-tree HEAD -- push-guard.sh | awk '{print $1}')"
+disk_mode="$(stat -c '%a' "$TMP/laundered/push-guard.sh")"
+if [[ "$src_mode" == "100644" && "$disk_mode" == "755" ]]; then
+    printf '  ok    [%-14s] fixture is git=%s disk=%s\n' "w2-fixture" "$src_mode" "$disk_mode"; PASS=$(( PASS + 1 ))
+else
+    printf '  FAIL  [%-14s] fixture wrong: git=%s disk=%s -- needle would not test the defect\n' \
+        "w2-fixture" "$src_mode" "$disk_mode"; FAIL=$(( FAIL + 1 ))
+fi
+run_case w2-laundered 1 "committed 100644, needs 100755" "$TMP/laundered"
+
+echo
+echo "== the artifact must be COMMITTED, or there is no mode to verify =="
+mkrepo "$TMP/untracked" >/dev/null
+git -C "$TMP/untracked" rm -q --cached push-guard.sh
+git -C "$TMP/untracked" commit -q -m "untrack the guard"
+run_case w3-untracked 1 "NOT TRACKED" "$TMP/untracked"
+
+echo
+echo "== a committed SYMLINK is a path, not the reviewed code =="
+mkrepo "$TMP/symlink" >/dev/null
+( cd "$TMP/symlink" && rm -f push-guard.sh && ln -s /dev/null push-guard.sh \
+  && git add push-guard.sh && git commit -q -m "symlink the guard" )
+run_case w4-symlink 1 "SYMLINK" "$TMP/symlink"
+
+echo
+echo "== not a repository at all: REFUSE, never pass =="
+mkdir -p "$TMP/bare"
+for f in "${ARTIFACTS[@]}"; do install -m 755 "$HERE/$f" "$TMP/bare/$f"; done
+run_case w5-norepo 1 "not inside a git repository" "$TMP/bare"
+
+echo
+printf '%d passed, %d failed\n' "$PASS" "$FAIL"
+(( FAIL == 0 ))

packages/mosaic/framework/tools/git/verify-clean-clone.sh

@@ -0,0 +1,147 @@
+#!/usr/bin/env bash
+# verify-clean-clone.sh -- prove the COMMITTED artifact runs, from a clean clone.
+#
+# ================== THIS FILE IS THE SECOND VERSION. THE FIRST HAD B1. ========
+# B1 was: the delivered scripts were committed mode 100644, so the artifact
+# returned 126 Permission denied for anyone who cloned it. Two of us ran 32/32
+# because our local working copies had the exec bit set by hand at creation.
+#
+# I wrote v1 of this file to prevent exactly that. V1 COPIED THE WORKING-TREE
+# FILES INTO A SCRATCH REPOSITORY AND ASSERTED THE SCRATCH REPOSITORY'S INDEX.
+# cp preserves the local exec bit, so `git add` in the scratch repo recorded
+# 100755 NO MATTER WHAT THE REAL REPOSITORY STORED. Reviewer reproduction:
+#     git update-index --chmod=-x push-guard.sh test-push-guard.sh
+#     ./verify-clean-clone.sh   ->  EXIT 0, "CLEAN CLONE: suite ran and passed"
+# while the real index read 100644 -- the precise contaminated state B1 was.
+#
+#   THE CONTROL FOR THE DEFECT INHERITED THE DEFECT, BECAUSE IT MEASURED A COPY
+#   INSTEAD OF THE SUBJECT. cp LAUNDERS MODE.
+#
+# Both of v1's mechanisms were right -- assert the INDEX not the disk, execute
+# DIRECTLY not via `bash script`. They were applied to the wrong repository.
+# So v2 changes what is measured, not how:
+#   * mode is read from the SOURCE repository's COMMITTED TREE (git ls-tree),
+#     which no local chmod can influence;
+#   * the tree under test is produced by CLONING THAT COMMIT, so every mode
+#     comes out of the object store rather than off my filesystem.
+# There is no cp anywhere in this file, and that is deliberate.
+#
+# It also REFUSES rather than passes when the artifacts are untracked: an
+# artifact that is not committed has no mode to verify, and a verifier that
+# silently succeeds on nothing is the vacuous-absence failure all over again.
+
+set -euo pipefail
+
+readonly EX_FAIL=1
+readonly EX_USAGE=64
+
+REPO=""
+REV="HEAD"
+
+die() { printf 'usage error: %s\n' "$1" >&2; exit "$EX_USAGE"; }
+
+while (( $# )); do
+    case "$1" in
+        --repo) REPO="${2:-}"; shift 2 ;;
+        --rev)  REV="${2:-}";  shift 2 ;;
+        *) die "unknown argument: $1" ;;
+    esac
+done
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+[[ -n "$REPO" ]] || REPO="$HERE"
+
+ARTIFACTS=(push-guard.sh test-push-guard.sh verify-clean-clone.sh mutate-push-guard.sh
+           test-mutate-push-guard.sh
+           test-verify-clean-clone.sh)
+SUITE="test-push-guard.sh"
+
+# --- the subject must be a real repository, or there is nothing to verify -----
+if ! ROOT="$(git -C "$REPO" rev-parse --show-toplevel 2>/dev/null)"; then
+    printf 'REFUSING: %s is not inside a git repository.\n' "$REPO" >&2
+    printf 'This verifier checks the COMMITTED mode of the artifact. An uncommitted\n' >&2
+    printf 'artifact has no committed mode, and passing here would prove nothing.\n' >&2
+    exit "$EX_FAIL"
+fi
+if ! REV_SHA="$(git -C "$ROOT" rev-parse --verify --quiet "${REV}^{commit}")"; then
+    printf 'REFUSING: %s does not resolve to a commit in %s\n' "$REV" "$ROOT" >&2
+    exit "$EX_FAIL"
+fi
+
+# --- THE ARTIFACT'S COMMITTED PATH, NOT ITS BASENAME -------------------------
+# v2 asserted `git ls-tree HEAD -- push-guard.sh`, which is a ROOT-RELATIVE
+# pathspec. These files really live several directories down. Run in place and
+# every artifact came back "NOT TRACKED" -- the verifier built to stop packaging
+# false-greens could not verify the tree that ships it.
+#
+# The tests missed it because EVERY FIXTURE INSTALLED THE ARTIFACTS AT THE
+# FIXTURE ROOT. 6/6 green proved flat-layout operation and nothing about the
+# deployed path. THAT IS THE THIRD TIME ON THIS TOOL THAT A CONTROL VALIDATED A
+# MODEL INSTEAD OF THE SUBJECT: v1 measured a cp'd scratch repo, and then v2's
+# own tests measured a layout that does not exist. A fixture is a claim about
+# the world, and an untested fixture is an unreviewed one.
+#
+# --show-prefix answers "where is this directory inside its repository", so the
+# same prefix drives ls-tree, the cloned stat, and the suite's working dir.
+PREFIX="$(git -C "$REPO" rev-parse --show-prefix)"
+
+printf '=== subject ===\n'
+printf '  repo   %s\n  rev    %s (%s)\n  prefix %s\n\n' \
+    "$ROOT" "$REV" "$REV_SHA" "${PREFIX:-<repository root>}"
+
+# --- 1. MODE, FROM THE COMMITTED TREE OF THE SUBJECT -------------------------
+# git ls-tree reports what the COMMIT records. Nothing on my filesystem can
+# move this number -- which is the whole point, and what v1 got wrong.
+printf '=== committed modes (git ls-tree %s) ===\n' "$REV"
+rc=0
+for f in "${ARTIFACTS[@]}"; do
+    entry="$(git -C "$ROOT" ls-tree "$REV_SHA" -- "${PREFIX}${f}")"
+    if [[ -z "$entry" ]]; then
+        printf '  FAIL  %s is NOT TRACKED at %s -- nothing committed to verify\n' "$f" "$REV"
+        rc=1; continue
+    fi
+    mode="${entry%% *}"; rest="${entry#* }"; type="${rest%% *}"
+    if [[ "$type" != blob ]]; then
+        printf '  FAIL  %s is a %s at %s, not a regular file\n' "$f" "$type" "$REV"
+        rc=1; continue
+    fi
+    case "$mode" in
+        100755) printf '  ok    %s committed %s\n' "$f" "$mode" ;;
+        120000) printf '  FAIL  %s is a SYMLINK (%s) -- the reviewed blob is a path, not the code\n' "$f" "$mode"; rc=1 ;;
+        *)      printf '  FAIL  %s committed %s, needs 100755\n' "$f" "$mode"
+                printf '        fix with: git update-index --chmod=+x %s && commit\n' "$f"
+                rc=1 ;;
+    esac
+done
+if (( rc != 0 )); then
+    printf '\nREFUSING TO CONTINUE: the COMMITTED modes are wrong, whatever the disk says.\n'
+    printf 'A clone of this commit would exit 126 for the next person.\n'
+    exit "$EX_FAIL"
+fi
+
+# --- 2. RUN FROM A CLONE OF THAT COMMIT --------------------------------------
+# Cloning materialises every file from the object store, so the modes on disk
+# are the COMMITTED modes by construction. No cp, no local state, nothing this
+# machine can contribute.
+WORK="$(mktemp -d)"
+trap 'rm -rf "$WORK"' EXIT
+
+printf '\n=== cloning %s (no local mode bits survive this) ===\n' "$REV_SHA"
+git clone -q --no-local --no-hardlinks "$ROOT" "$WORK/clone"
+git -C "$WORK/clone" -c advice.detachedHead=false checkout -q "$REV_SHA"
+
+for f in "${ARTIFACTS[@]}"; do
+    printf '  clone disk mode: %s %s\n' "$(stat -c '%a' "$WORK/clone/${PREFIX}${f}")" "${PREFIX}${f}"
+done
+
+printf '\n=== executing DIRECTLY (./%s), not via "bash %s" ===\n' "$SUITE" "$SUITE"
+# Invoking the interpreter explicitly masks a missing exec bit completely -- it
+# is how the original green was obtained. Direct execution is the thing under
+# test, so the mode has to be real for this line to succeed.
+cd "$WORK/clone/${PREFIX}"
+if ! "./$SUITE"; then
+    printf '\nCLEAN-CLONE RUN FAILED.\n'
+    exit "$EX_FAIL"
+fi
+
+printf '\n=== CLEAN CLONE: the COMMITTED artifact ran and passed ===\n'

packages/mosaic/framework/tools/quality/scripts/check-test-enumeration.sh

@@ -0,0 +1,165 @@
+#!/usr/bin/env bash
+# check-test-enumeration.sh — CI test-membership guard (#1017).
+#
+# CI reaches shell suites through two hand-enumerated surfaces:
+#   S1  packages/mosaic/package.json  scripts."test:framework-shell"
+#   S2  .woodpecker/ci.yml            direct `bash packages/mosaic/framework/tools/...` commands
+#
+# A hand-enumerated allowlist re-arms its own gap: a new suite never auto-joins,
+# so the list silently under-runs the disk (17 of 39 suites were invisible when
+# #1017 was filed). This guard makes that under-run impossible to do silently:
+#
+#   FAIL when a suite-shaped file exists on disk and is neither enumerated on
+#        the UNION of both surfaces nor listed in the exclusions file.
+#        ("Enumerated", deliberately — F1/F2 on PR #1018 proved this guard sees
+#        NAMING, not reachability, and its words must not claim otherwise.)
+#   FAIL when either surface names a path that does not exist on disk
+#        (a rename manufactures a stale entry silently — checked BOTH directions).
+#   FAIL when an exclusion entry has no reason, names a path that is gone,
+#        names a path that is also enumerated (contradiction), or names a path
+#        outside the population (dead weight that looks like coverage).
+#
+# POPULATION PATTERN — a deliberate decision, stated per #1017's record:
+# basename matches *test*.sh (contains "test", ends ".sh"). Deliberately BROAD:
+# the strict `test-*.sh` prefix cannot even name three real boundary files
+# (tmux/agent-send.test.sh — CI-run; orchestrator/smoke-test.sh;
+# wake/validate-973/microtest-wake-assert.sh), and three independent censuses
+# handled that last file three different ways with no trace of the judgement.
+# The broad pattern makes such files MEMBERS, so their disposition must be a
+# signed exclusion, not an accident of the glob. The SAME pattern is applied to
+# both sides of the comparison (disk and enumeration) — a comparison globbed two
+# ways runs on two different populations. Scripts outside the pattern on both
+# sides symmetrically (e.g. check-resident-budget.sh, verify-sanitized.sh) are
+# check-scripts, not suites; their existence is still verified via the
+# both-directions rule because every surface-named path must exist on disk.
+#
+# The surfaces are PARSED, never line-ranged: three seats independently
+# mis-scoped hand-written line ranges against these files (#1017 thread). S1 is
+# read via JSON + command-chain tokenization; S2 by extracting every
+# packages/mosaic/framework/tools/ token wherever it appears in the file.
+#
+# Exclusions file format (framework/tools/quality/test-enumeration-exclusions.txt):
+#   <repo-relative-path> | <non-empty reason>
+# Lines starting with # and blank lines are ignored. An exclusion is a recorded
+# decision someone signed, not an omission nobody made.
+
+set -uo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+ROOT="$(cd "$SCRIPT_DIR/../../../../../.." && pwd)"
+while (( $# )); do
+    case "$1" in
+        --root) ROOT="$(cd "$2" && pwd)"; shift 2 ;;
+        *) echo "usage: check-test-enumeration.sh [--root <repo-root>]" >&2; exit 2 ;;
+    esac
+done
+
+PKG_JSON="$ROOT/packages/mosaic/package.json"
+CI_YML="$ROOT/.woodpecker/ci.yml"
+TOOLS_DIR="$ROOT/packages/mosaic/framework/tools"
+EXCLUSIONS="$TOOLS_DIR/quality/test-enumeration-exclusions.txt"
+
+for f in "$PKG_JSON" "$CI_YML"; do
+    [[ -f "$f" ]] || { echo "FAIL: required surface file missing: $f" >&2; exit 2; }
+done
+[[ -d "$TOOLS_DIR" ]] || { echo "FAIL: tools dir missing: $TOOLS_DIR" >&2; exit 2; }
+
+fail_count=0
+fail() { printf 'FAIL  %s\n' "$1"; fail_count=$(( fail_count + 1 )); }
+
+# in_population <repo-relative path> — the single pattern, used for BOTH sides.
+in_population() {
+    local base; base="$(basename "$1")"
+    [[ "$base" == *test*.sh ]]
+}
+
+# --- Surface 1: package.json test:framework-shell, parsed, repo-relative -----
+# Tokens are script paths iff they contain "/" and end .sh/.py; interpreter
+# names and flags are skipped. Paths are relative to packages/mosaic/.
+mapfile -t S1 < <(python3 - "$PKG_JSON" <<'PY'
+import json, shlex, sys
+cmd = json.load(open(sys.argv[1]))["scripts"].get("test:framework-shell", "")
+seen = []
+for seg in cmd.split("&&"):
+    for tok in shlex.split(seg):
+        if "/" in tok and (tok.endswith(".sh") or tok.endswith(".py")):
+            path = "packages/mosaic/" + tok
+            if path not in seen:
+                seen.append(path)
+print("\n".join(seen))
+PY
+)
+
+# --- Surface 2: ci.yml, every framework/tools token wherever it appears ------
+# Comment lines (first non-whitespace char is #) are skipped BEFORE matching:
+# commenting an invocation out is the most common way a suite actually gets
+# disabled, and a raw-text regex would keep calling it enumerated (F1, 20155 on
+# PR #1018 — demonstrated, not argued). Known residual limit: a path named only
+# in a TRAILING comment on a live line still matches; no such line exists today
+# and full fidelity would need a YAML parser the CI image does not ship.
+mapfile -t S2 < <(grep -vE '^[[:space:]]*#' "$CI_YML" \
+    | grep -oE 'packages/mosaic/framework/tools/[A-Za-z0-9_./-]+\.(sh|py)' | sort -u)
+
+# --- Union, and its population-restricted view -------------------------------
+declare -A ENUM=() ENUM_POP=()
+for p in "${S1[@]:-}" "${S2[@]:-}"; do
+    [[ -n "$p" ]] || continue
+    ENUM["$p"]=1
+    in_population "$p" && ENUM_POP["$p"]=1
+done
+
+# --- Direction B: every surface-named path must exist on disk ----------------
+for p in "${!ENUM[@]}"; do
+    [[ -f "$ROOT/$p" ]] || fail "STALE ENUMERATION: surfaces name '$p' but it does not exist on disk"
+done
+
+# --- Exclusions: parsed with the same rigor the enumeration gets -------------
+declare -A EXCLUDED=()
+if [[ -f "$EXCLUSIONS" ]]; then
+    lineno=0
+    while IFS= read -r line; do
+        lineno=$(( lineno + 1 ))
+        [[ "$line" =~ ^[[:space:]]*(#|$) ]] && continue
+        path="${line%%|*}"; reason="${line#*|}"
+        path="$(echo "$path" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')"
+        reason="$(echo "$reason" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')"
+        if [[ "$line" != *"|"* || -z "$reason" ]]; then
+            fail "EXCLUSION MISSING REASON: line $lineno ('$path') — an exclusion is a recorded decision someone signed"
+            continue
+        fi
+        if [[ ! -f "$ROOT/$path" ]]; then
+            fail "STALE EXCLUSION: line $lineno excludes '$path' which does not exist on disk"
+            continue
+        fi
+        if ! in_population "$path"; then
+            fail "EXCLUSION OUTSIDE POPULATION: line $lineno excludes '$path' which the population pattern does not name — dead weight that reads as coverage"
+            continue
+        fi
+        if [[ -n "${ENUM[$path]:-}" ]]; then
+            fail "CONTRADICTORY EXCLUSION: line $lineno excludes '$path' which the surfaces already enumerate"
+            continue
+        fi
+        EXCLUDED["$path"]=1
+    done < "$EXCLUSIONS"
+fi
+
+# --- Direction A: disk population must be enumerated or signed-excluded ------
+disk_total=0
+unlisted=0
+while IFS= read -r f; do
+    rel="${f#"$ROOT"/}"
+    in_population "$rel" || continue
+    disk_total=$(( disk_total + 1 ))
+    if [[ -z "${ENUM_POP[$rel]:-}" && -z "${EXCLUDED[$rel]:-}" ]]; then
+        fail "UNENUMERATED: '$rel' exists on disk but is neither enumerated on any CI surface nor signed in the exclusions file"
+        unlisted=$(( unlisted + 1 ))
+    fi
+done < <(find "$TOOLS_DIR" -type f -name '*.sh' | sort)
+
+if (( fail_count > 0 )); then
+    printf 'enumeration guard: %d failure(s) — population %d, enumerated (in-population) %d, excluded %d\n' \
+        "$fail_count" "$disk_total" "${#ENUM_POP[@]}" "${#EXCLUDED[@]}"
+    exit 1
+fi
+printf 'enumeration guard: OK — population %d, enumerated (in-population) %d, excluded (signed) %d, surfaces name %d path(s), all present on disk\n' \
+    "$disk_total" "${#ENUM_POP[@]}" "${#EXCLUDED[@]}" "${#ENUM[@]}"

packages/mosaic/framework/tools/quality/scripts/test-check-test-enumeration.sh

@@ -0,0 +1,166 @@
+#!/usr/bin/env bash
+# test-check-test-enumeration.sh — needles for the enumeration guard (#1017).
+#
+# Every failure mode the guard promises gets BOTH polarities:
+#   NEEDLE   a fixture that MUST trip the guard, asserted on the guard's OWN
+#            words (--out) — exit 1 alone cannot distinguish "caught the rogue
+#            file" from "choked on the fixture".
+#   CONTROL  a fixture that MUST pass. A guard that failed unconditionally
+#            would satisfy every needle here — the null-case defect the guard's
+#            own subject matter (#1017) exists to make impossible.
+#
+# The needles encode the specific errors that produced #1017's thread:
+#   n6 is the 20124 boundary file (a suite the strict prefix cannot name);
+#   n2b proves surface 2 is PARSED, not line-ranged (three seats mis-scoped
+#       hand-written ranges against ci.yml);
+#   n5/n7 keep the exclusions file honest so it cannot become the next silent cap;
+#   n8/c4 are F1 (20155): a commented-out ci.yml line is NOT enumeration —
+#       commenting-out is the most common way a suite actually gets disabled,
+#       and it must fail loud in one direction without false-staling the other.
+
+set -uo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+GUARD="$HERE/check-test-enumeration.sh"
+TMP="$(mktemp -d)"; trap 'rm -rf "$TMP"' EXIT
+PASS=0; FAIL=0
+
+# fixture <name> — a minimal repo root the guard accepts via --root:
+# one suite enumerated on S1 (plus a naming-outlier suite, so the S1 parser's
+# handling of non-prefix names is always exercised), one on S2, one check-script
+# named on S2 that is outside the population, and an empty exclusions file.
+fixture() {
+    local r="$TMP/$1"
+    mkdir -p "$r/packages/mosaic/framework/tools/git" \
+             "$r/packages/mosaic/framework/tools/tmux" \
+             "$r/packages/mosaic/framework/tools/quality/scripts" \
+             "$r/.woodpecker"
+    printf '#!/usr/bin/env bash\nexit 0\n' > "$r/packages/mosaic/framework/tools/git/test-a.sh"
+    printf '#!/usr/bin/env bash\nexit 0\n' > "$r/packages/mosaic/framework/tools/tmux/outlier.test.sh"
+    printf '#!/usr/bin/env bash\nexit 0\n' > "$r/packages/mosaic/framework/tools/quality/scripts/test-ci.sh"
+    printf '#!/usr/bin/env bash\nexit 0\n' > "$r/packages/mosaic/framework/tools/quality/scripts/verify-thing.sh"
+    cat > "$r/packages/mosaic/package.json" <<'JSON'
+{"scripts": {"test:framework-shell": "bash framework/tools/git/test-a.sh && bash framework/tools/tmux/outlier.test.sh"}}
+JSON
+    cat > "$r/.woodpecker/ci.yml" <<'YML'
+steps:
+  sanitize:
+    commands:
+      - bash packages/mosaic/framework/tools/quality/scripts/verify-thing.sh
+  guard:
+    commands:
+      - bash packages/mosaic/framework/tools/quality/scripts/test-ci.sh
+YML
+    : > "$r/packages/mosaic/framework/tools/quality/test-enumeration-exclusions.txt"
+    printf '%s' "$r"
+}
+
+# expect <kind> <want-exit> <desc> [--out <substring>] -- <root>
+expect() {
+    local kind="$1" want="$2" desc="$3"; shift 3
+    local need_out=""
+    while (( $# )); do
+        case "$1" in
+            --out) need_out="$2"; shift 2 ;;
+            --)    shift; break ;;
+        esac
+    done
+    local root="$1" got=0 out
+    out="$(bash "$GUARD" --root "$root" 2>&1)" || got=$?
+    local why=""
+    [[ "$got" == "$want" ]] || why="wanted exit $want, got $got"
+    if [[ -z "$why" && -n "$need_out" && "$out" != *"$need_out"* ]]; then
+        why="exit $got as expected, but output never said: $need_out"
+    fi
+    if [[ -z "$why" ]]; then
+        printf '  PASS  [%-7s] %s (exit %s)\n' "$kind" "$desc" "$got"
+        PASS=$(( PASS + 1 ))
+    else
+        printf '  FAIL  [%-7s] %s — %s\n' "$kind" "$desc" "$why"
+        printf '%s\n' "$out" | sed 's/^/          | /'
+        FAIL=$(( FAIL + 1 ))
+    fi
+}
+
+excl() { printf '%s\n' "$2" >> "$1/packages/mosaic/framework/tools/quality/test-enumeration-exclusions.txt"; }
+
+echo "=== c1: a fully consistent fixture passes ==="
+R="$(fixture c1)"
+expect CONTROL 0 "consistent tree: both surfaces enumerated, nothing unlisted" \
+    --out "enumeration guard: OK" -- "$R"
+
+echo "=== n1: an on-disk suite reachable from no surface must fail ==="
+R="$(fixture n1)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/test-rogue.sh"
+expect NEEDLE 1 "unlisted suite is named in the failure" \
+    --out "UNENUMERATED: 'packages/mosaic/framework/tools/git/test-rogue.sh'" -- "$R"
+
+echo "=== n6: the 20124 boundary file — a suite the strict prefix cannot name ==="
+R="$(fixture n6)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/rogue.test.sh"
+expect NEEDLE 1 "naming-outlier suite (*.test.sh) is a population member, not invisible" \
+    --out "UNENUMERATED: 'packages/mosaic/framework/tools/git/rogue.test.sh'" -- "$R"
+
+echo "=== c3: a non-suite script outside the pattern is outside it on BOTH sides ==="
+R="$(fixture c3)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/check-unrelated.sh"
+expect CONTROL 0 "check-script on disk, unlisted, outside population: not the guard's business" \
+    --out "enumeration guard: OK" -- "$R"
+
+echo "=== n2/n2b: a surface naming a path absent from disk must fail — both surfaces ==="
+R="$(fixture n2)"
+rm "$R/packages/mosaic/framework/tools/git/test-a.sh"
+expect NEEDLE 1 "S1 (package.json) stale entry" \
+    --out "STALE ENUMERATION: surfaces name 'packages/mosaic/framework/tools/git/test-a.sh'" -- "$R"
+R="$(fixture n2b)"
+rm "$R/packages/mosaic/framework/tools/quality/scripts/test-ci.sh"
+expect NEEDLE 1 "S2 (ci.yml) stale entry — proves ci.yml is parsed, not line-ranged" \
+    --out "STALE ENUMERATION: surfaces name 'packages/mosaic/framework/tools/quality/scripts/test-ci.sh'" -- "$R"
+
+echo "=== c2: a rogue suite with a SIGNED exclusion passes, and is counted ==="
+R="$(fixture c2)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/test-rogue.sh"
+excl "$R" "packages/mosaic/framework/tools/git/test-rogue.sh | non-hermetic pending fixture work (needle-suite specimen)"
+expect CONTROL 0 "signed exclusion is honoured and visible in the summary" \
+    --out "excluded (signed) 1" -- "$R"
+
+echo "=== n3: an exclusion with no reason is not a decision ==="
+R="$(fixture n3)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/test-rogue.sh"
+excl "$R" "packages/mosaic/framework/tools/git/test-rogue.sh |   "
+expect NEEDLE 1 "empty reason rejected" --out "EXCLUSION MISSING REASON" -- "$R"
+R="$(fixture n3b)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/test-rogue.sh"
+excl "$R" "packages/mosaic/framework/tools/git/test-rogue.sh"
+expect NEEDLE 1 "missing separator rejected (the path alone is not a signature)" \
+    --out "EXCLUSION MISSING REASON" -- "$R"
+
+echo "=== n4: an exclusion whose path is gone is stale, not satisfied ==="
+R="$(fixture n4)"
+excl "$R" "packages/mosaic/framework/tools/git/test-vanished.sh | was excluded once, then deleted"
+expect NEEDLE 1 "stale exclusion rejected" --out "STALE EXCLUSION" -- "$R"
+
+echo "=== n5: excluding an enumerated suite is a contradiction, not belt-and-braces ==="
+R="$(fixture n5)"
+excl "$R" "packages/mosaic/framework/tools/git/test-a.sh | already in CI but excluded anyway"
+expect NEEDLE 1 "contradictory exclusion rejected" --out "CONTRADICTORY EXCLUSION" -- "$R"
+
+echo "=== n8/c4: a commented-out ci.yml line is not enumeration (F1, 20155) ==="
+R="$(fixture n8)"
+printf '#!/usr/bin/env bash\nexit 0\n' > "$R/packages/mosaic/framework/tools/git/test-disabled.sh"
+printf '      # - bash packages/mosaic/framework/tools/git/test-disabled.sh\n' >> "$R/.woodpecker/ci.yml"
+expect NEEDLE 1 "suite named only in a commented-out invocation is UNENUMERATED" \
+    --out "UNENUMERATED: 'packages/mosaic/framework/tools/git/test-disabled.sh'" -- "$R"
+R="$(fixture c4)"
+printf '      # - bash packages/mosaic/framework/tools/git/test-vanished.sh\n' >> "$R/.woodpecker/ci.yml"
+expect CONTROL 0 "comment naming an absent path raises no false stale-enumeration" \
+    --out "enumeration guard: OK" -- "$R"
+
+echo "=== n7: excluding a file outside the population is dead weight, not coverage ==="
+R="$(fixture n7)"
+excl "$R" "packages/mosaic/framework/tools/quality/scripts/verify-thing.sh | not a suite but signing it anyway"
+expect NEEDLE 1 "out-of-population exclusion rejected" --out "EXCLUSION OUTSIDE POPULATION" -- "$R"
+
+echo
+printf 'enumeration-guard needles: %d passed, %d failed\n' "$PASS" "$FAIL"
+(( FAIL == 0 ))

packages/mosaic/framework/tools/quality/test-enumeration-exclusions.txt

@@ -0,0 +1,45 @@
+# test-enumeration-exclusions.txt — signed exclusions for check-test-enumeration.sh (#1017).
+#
+# Every entry is a recorded decision: a suite-shaped file that exists on disk,
+# is NOT reachable from any CI surface, and carries the reason someone signed
+# for that. The guard FAILS on an entry with no reason, a stale path, or a path
+# the surfaces already enumerate. Burning an entry down = making it CI-reachable
+# (package.json test:framework-shell or a ci.yml step) and deleting its line.
+#
+# Format: <repo-relative path> | <reason>
+# All entries below were signed at #1017's filing base (main 826a8b3b, 2026-07-31)
+# by pepper (sb-it-1-dt); measurements cited are one-run assertions from that seat.
+
+# --- tools/git: the #1007 five — non-hermetic, resolve real credentials ---
+packages/mosaic/framework/tools/git/test-pr-merge-gitea-empty-uid.sh | resolves real credentials (#1007 census); joins CI after the wrapper-half hermeticity fix (git -C scoping)
+packages/mosaic/framework/tools/git/test-issue-create-interactive-auth.sh | resolves real credentials (#1007 census); joins CI after the wrapper-half hermeticity fix
+packages/mosaic/framework/tools/git/test-gitea-login-resolution.sh | resolves real credentials (#1007 census); joins CI after the wrapper-half hermeticity fix
+packages/mosaic/framework/tools/git/test-pr-metadata-gitea.sh | resolves real credentials (#1007 census, fourth entry via family-grep); joins CI after the wrapper-half hermeticity fix
+packages/mosaic/framework/tools/git/test-issue-comment-readback.sh | resolves real credentials (#1007 census, fifth entry); joins CI after the wrapper-half hermeticity fix
+
+# --- tools/git: push guards — measured green locally, CI-image fitness unverified ---
+packages/mosaic/framework/tools/git/test-push-guard.sh | measured green at 826a8b3b (46 passed / 0 failed, one run, 2026-07-31); CI-image fitness unverified; #1017 burndown
+packages/mosaic/framework/tools/git/test-mutate-push-guard.sh | measured green at 826a8b3b (8/0, 13 mutants killed 0 survived, one run, 2026-07-31); requires setsid (util-linux), absent from the alpine base image; #1017 burndown
+packages/mosaic/framework/tools/git/test-issue-create-body-safety.sh | hermeticity unaudited — the unprotected suite in #1007's protected/unprotected split; audit before CI; #1017 burndown
+
+# --- tools/git: unmeasured ---
+packages/mosaic/framework/tools/git/test-verify-clean-clone.sh | unmeasured in CI image; asserts git file-mode (100644/755) semantics that need verification on the CI filesystem first; #1017 burndown
+packages/mosaic/framework/tools/git/test-help-exit-code.sh | unmeasured in CI image; stub-based (#701 regression harness), likely CI-fit; #1017 burndown
+packages/mosaic/framework/tools/git/test-lane-brief-pr-linkage.sh | unmeasured in CI image; fixture-based (#546/#547 regression harness), likely CI-fit; #1017 burndown
+
+# --- tools/tmux: require a live tmux server ---
+packages/mosaic/framework/tools/tmux/test-send-message-socket.sh | requires a real tmux server on a throwaway socket; CI image ships no tmux; #1017 burndown (needs tmux in image or a signed permanent exclusion)
+packages/mosaic/framework/tools/tmux/test-send-message-verdict.sh | requires real tmux-pane fixtures on a throwaway socket; CI image ships no tmux; #1017 burndown (same condition as its sibling)
+
+# --- single-suite directories: unmeasured in CI ---
+packages/mosaic/framework/tools/fleet/test-start-agent-session.sh | unmeasured in CI image; stubs tmux via a fake bin dir, likely CI-fit; #1017 burndown
+packages/mosaic/framework/tools/glpi/test-list-http-status.sh | unmeasured in CI image; stub-based (#807 regression harness), likely CI-fit; #1017 burndown
+packages/mosaic/framework/tools/orchestrator/test-board-roll.sh | unmeasured in CI image; file-fixture based, likely CI-fit; #1017 burndown
+packages/mosaic/framework/tools/woodpecker/test-ci-wait-exit-matrix.sh | unmeasured in CI image; drives ci-wait.sh against a stub pipeline-status.sh, likely CI-fit; #1017 burndown
+
+# --- naming-boundary files the strict test-*.sh prefix cannot even name ---
+# (#1017: three independent censuses handled the microtest file three different
+# ways — editorial drop, structural exclusion, accidental inclusion — with no
+# recorded judgement. These lines ARE that judgement, signed.)
+packages/mosaic/framework/tools/orchestrator/smoke-test.sh | behavior smoke checks for coord continue/run workflows, run manually by orchestrator seats; unmeasured in CI; #1017 burndown
+packages/mosaic/framework/tools/wake/validate-973/microtest-wake-assert.sh | #973 instrument self-test, run as a precondition of the validate-973 evidence procedure rather than as a standing CI suite; #1017 burndown candidate

packages/mosaic/framework/tools/wake/_wake-common.sh

@@ -191,3 +191,177 @@ _wake_init_dir() {
   [ -f "$dir/pending.jsonl" ] || printf '' | _atomic_write "$dir/pending.jsonl"
   [ -f "$dir/ack-ledger.jsonl" ] || printf '' | _atomic_write "$dir/ack-ledger.jsonl"
 }
+
+# ---------------------------------------------------------------------------
+# #973 — three-valued grep assertion helpers for the wake test suites.
+#
+# grep's exit contract is three-valued: 0 = match, 1 = no match, >1 = ERROR
+# (bad file, bad pattern, resource failure). Every wake-suite assertion used
+# to read all non-zero as "absent", so a grep that COULD NOT LOOK wore the
+# colour of a verdict: OR-polarity sites (`|| fail`) went falsely red,
+# AND-polarity sites (`&& fail` — including the credential canaries) went
+# falsely green. The repair is to refuse to answer: rc 0 -> match, rc 1 -> no
+# match, anything else -> loud abort naming the call site, the raw exit code,
+# and the arguments. An error NEVER becomes a verdict.
+#
+# Production tools (store.sh, ack.sh) source this file but call none of the
+# helpers below; they are inert outside the suites.
+#
+# Suite integration contract:
+#   - Call `wake_assert_init` ONCE at suite top level, right after sourcing.
+#     It dups the suite's real stderr to a saved fd BEFORE any call-site
+#     redirect exists, so an abort stays loud even at sites that append
+#     `2>/dev/null` (the preimage credential canaries pre-swallow stderr —
+#     exactly where a silent abort would recreate the defect being fixed).
+#   - Assertion sites live inside `( ... ) && ok` subshell blocks, pipelines,
+#     and `$(...)` substitutions, where a plain `exit` dies one layer deep and
+#     the suite would carry on to emit a verdict. The abort therefore signals
+#     the suite's MAIN shell ($$ is the main PID in every subshell) and then
+#     exits the current context: the suite dies by signal, non-zero, with NO
+#     verdict line emitted.
+#
+# Validation instrumentation (#973 evidence, not part of the assertion fix):
+#   - WAKE_ASSERT_LEDGER=<file>: every helper call appends
+#     "<helper> <caller-file>:<caller-line>" to <file>. That is the ONLY
+#     divergence from production behaviour — the suite otherwise runs its
+#     normal arms, so a validate run exercises exactly the shipped paths.
+#   - WAKE_ASSERT_FORCE_GREP_ERROR_AT=<caller-file>:<caller-line>: at exactly
+#     that call site, the invocation is routed through a REAL grep driven onto
+#     its real error path (unknown option -> rc 2) — a genuinely executed
+#     failing process, not a stubbed return — to prove per-site that the abort
+#     fires. Unset in production; matching no site is a no-op.
+# ---------------------------------------------------------------------------
+
+# wake_assert_init — dup the suite's real stderr once, for abort loudness.
+# MUST be called at suite TOP LEVEL, immediately after sourcing and before any
+# test block: a lazy (first-call) dup could capture an already-redirected
+# stderr if the first executed helper call sat under a call-site 2>/dev/null,
+# silencing every abort thereafter. The fd is allocated dynamically (>= 10),
+# so it cannot collide with the wake lock fds (8) or the detector run-loop
+# lock (9).
+#
+# Init also PINS the BASH_LINENO convention the site coordinates depend on:
+# a helper call written across a backslash continuation must report at its
+# FIRST physical line (the denominator artifact's convention). That was
+# measured on a developer bash (5.3.x); CI runs whatever bash its base image
+# baked in, and that version floats silently between image rebuilds. A bash
+# that disagrees would shift every continuation-site coordinate by one line
+# UNDER the validation instead of in front of it — so the convention is
+# asserted at runtime, in the same bash binary that runs the suite, and a
+# disagreeing bash aborts the suite loudly instead of skewing coordinates.
+_wake_assert_lineno_pin() {
+  local _wa_pin_tmp _wa_pin_got
+  _wa_pin_tmp="$(mktemp)" || {
+    _wake_assert_err_note "WAKE-ASSERT INIT ABORT: mktemp failed; cannot pin the BASH_LINENO convention — a pin that silently does not run is not a pin (#973)"
+    exit 97
+  }
+  cat >"$_wa_pin_tmp" <<'WAKE_ASSERT_PIN'
+_wap() { printf '%s\n' "${BASH_LINENO[0]}"; }
+(
+  _wap simple
+  _wap \
+    continuation
+)
+WAKE_ASSERT_PIN
+  # WAKE_ASSERT_PIN_BASH: test-only interpreter override so the pin's abort
+  # arm can be PROVEN to fire (microtest C10) — bash resets $BASH at startup,
+  # so the real probe interpreter cannot be spoofed from the environment.
+  _wa_pin_got="$("${WAKE_ASSERT_PIN_BASH:-${BASH:-bash}}" "$_wa_pin_tmp" 2>/dev/null)"
+  rm -f "$_wa_pin_tmp"
+  if [ "$_wa_pin_got" != "$(printf '3\n4')" ]; then
+    _wake_assert_err_note "WAKE-ASSERT INIT ABORT: BASH_LINENO convention violated on bash ${BASH_VERSION}: probe reported [${_wa_pin_got:-<no output>}], expected [3 4] (simple call at own line, continuation call at FIRST physical line) — site coordinates are untrustworthy on this bash (#973)"
+    exit 97
+  fi
+}
+
+wake_assert_init() {
+  if [ -z "${_wake_assert_err_fd:-}" ]; then
+    exec {_wake_assert_err_fd}>&2
+    _wake_assert_lineno_pin
+  fi
+}
+
+# _wake_assert_err_note MSG — write MSG to the saved real-stderr fd, falling
+# back to the current stderr if init was never called.
+_wake_assert_err_note() {
+  if [ -n "${_wake_assert_err_fd:-}" ]; then
+    printf '%s\n' "$1" >&"$_wake_assert_err_fd" 2>/dev/null ||
+      printf '%s\n' "$1" >&2
+  else
+    printf '%s\n' "$1" >&2
+  fi
+}
+
+# _wake_assert_abort HELPER SITE RC ARGS... — refuse to answer, loudly.
+# Writes the named reason to the saved real-stderr fd (falling back to the
+# current stderr), signals the suite's main shell, and exits this context.
+_wake_assert_abort() {
+  local _wa_helper="$1" _wa_where="$2" _wa_code="$3"
+  shift 3
+  _wake_assert_err_note "WAKE-ASSERT ABORT: ${_wa_helper} at ${_wa_where}: grep exit ${_wa_code} is an error, not a verdict (args: $*) — refusing to answer (#973)"
+  if [ -n "${BASHPID:-}" ] && [ "$BASHPID" != "$$" ]; then
+    kill -TERM "$$" 2>/dev/null || true
+  fi
+  exit 97
+}
+
+# _wake_assert_armed SITE — true iff the forced-error arm targets SITE; on a
+# match it emits a positive confirmation FIRST, so "site did not abort" can
+# never conflate SITE NOT CONVERTED with ARM NEVER REACHED IT: an armed run
+# with no ARMED line means the arm matched nothing (typo/renumber/drift), and
+# an ARMED line with no abort means the site's error path is broken. The two
+# defects are separable on stderr alone.
+_wake_assert_armed() {
+  [ "${WAKE_ASSERT_FORCE_GREP_ERROR_AT:-}" = "$1" ] || return 1
+  _wake_assert_err_note "WAKE-ASSERT ARMED: forcing real grep error at $1 (#973)"
+  return 0
+}
+
+# has_match GREP_ARGS... — three-valued grep verdict.
+# Drop-in for verdict-bearing `grep` calls (flags, files, stdin all pass
+# through; stdout is not captured, so extract-form call sites may use it
+# inside a substitution). Returns 0 on match, 1 on no-match; any other grep
+# exit aborts the suite via _wake_assert_abort.
+has_match() {
+  local _wa_site="${BASH_SOURCE[1]##*/}:${BASH_LINENO[0]}" _wa_rc=0
+  if [ -n "${WAKE_ASSERT_LEDGER:-}" ]; then
+    printf 'has_match %s\n' "$_wa_site" >>"$WAKE_ASSERT_LEDGER"
+  fi
+  if _wake_assert_armed "$_wa_site"; then
+    command grep --wake-assert-forced-error -- /dev/null
+    _wa_rc=$?
+  else
+    command grep "$@"
+    _wa_rc=$?
+  fi
+  case "$_wa_rc" in
+  0) return 0 ;;
+  1) return 1 ;;
+  *) _wake_assert_abort has_match "$_wa_site" "$_wa_rc" "$@" ;;
+  esac
+}
+
+# count_lines GREP_ARGS... — `grep -c` with the same three-way discipline.
+# Call sites drop their `-c` (the helper supplies it) and keep every other
+# argument. Prints the count on rc 0 AND rc 1 (rc 1 is grep's "count is 0" —
+# a valid measurement, not an error); any other exit aborts. The abort still
+# kills the suite from inside a `$(...)` capture: the substitution subshell
+# cannot exit the suite, but the signal to the main shell can — a count from
+# a failed measurement is never printed.
+count_lines() {
+  local _wa_site="${BASH_SOURCE[1]##*/}:${BASH_LINENO[0]}" _wa_rc=0 _wa_out=""
+  if [ -n "${WAKE_ASSERT_LEDGER:-}" ]; then
+    printf 'count_lines %s\n' "$_wa_site" >>"$WAKE_ASSERT_LEDGER"
+  fi
+  if _wake_assert_armed "$_wa_site"; then
+    _wa_out="$(command grep --wake-assert-forced-error -c -- /dev/null)"
+    _wa_rc=$?
+  else
+    _wa_out="$(command grep -c "$@")"
+    _wa_rc=$?
+  fi
+  case "$_wa_rc" in
+  0 | 1) printf '%s\n' "$_wa_out" ;;
+  *) _wake_assert_abort count_lines "$_wa_site" "$_wa_rc" "$@" ;;
+  esac
+}

packages/mosaic/framework/tools/wake/detector.sh

@@ -529,7 +529,19 @@ cmd_run() {
         echo "detector.sh: WARN — off-host liveness beacon emit failed (see beacon.sh); the off-host absence check remains the authoritative dead-man." >&2
     fi
     [ "$once" -eq 1 ] && break
-    sleep "$interval"
+    # Close the detector lock fd in the sleep child; otherwise an orphaned sleep
+    # keeps the single-instance flock (fd 9, taken at exec 9> above) alive after
+    # the detector parent dies. The lock is non-blocking (`flock -n`, above), so
+    # for as long as that sleep survives a replacement instance is REFUSED and
+    # exits rather than queueing. This particular hold is BOUNDED by one poll
+    # interval (WAKE_DETECTOR_INTERVAL, default 30s): when the orphaned sleep
+    # exits its copy of fd 9 closes, ending this bounded sleep-child hold. It
+    # does NOT follow that the next start succeeds — other inheritors of fd 9
+    # (the M1 adapter, M2 sink grandchildren) are outside this patch's scope and
+    # can keep holding the flock. The cost this removes is a restart window in
+    # which every supervisor retry fails on the sleep child's account.
+    # `9>&-` closes ONLY the child's copy — the parent's lock is unaffected.
+    sleep "$interval" 9>&-
   done
 }
 

packages/mosaic/framework/tools/wake/manifest.txt

@@ -465,8 +465,26 @@
 #              never a hand-built flat dead-letter row, which would make the
 #              audit's correct non-conviction look exactly like the defect
 #              under hunt (the #951 review's false-defect near-miss).
+#   0.7.2  #973 three-valued grep verdicts across ALL TEN wake test suites.
+#              grep's exit contract is three-valued (0 match / 1 no-match /
+#              >=2 ERROR); every suite assertion read non-zero as "absent",
+#              so a grep that COULD NOT LOOK wore the colour of a verdict —
+#              OR-polarity sites failed falsely RED, AND-polarity sites
+#              (including all 19 credential canaries) failed falsely GREEN
+#              under load. _wake-common.sh gains has_match/count_lines
+#              (rc 0/1 pass through; anything else LOUDLY ABORTS the whole
+#              suite naming file:line + raw rc — an error is never a
+#              verdict), wake_assert_init (saved-fd abort loudness that
+#              survives call-site 2>/dev/null + a runtime pin of the
+#              BASH_LINENO coordinate convention against CI bash drift),
+#              and 261 call sites converted mechanically from a frozen
+#              denominator artifact. Production tools source but never call
+#              the helpers; suite verdict semantics on rc 0/1 are UNCHANGED.
+#              Evidence chain in validate-973/ (microtest C1-C11, expected/
+#              static/trace set arithmetic, 21 forced-error arms, residual
+#              sweep with per-form plants).
 component=wake
-version=0.7.1
+version=0.7.2
 
 # Watch-list schema this component consumes, and the INCLUSIVE range of
 # schema_version values it supports. A wake-watch-list.json whose schema_version

packages/mosaic/framework/tools/wake/test-wake-beacon.sh

@@ -31,6 +31,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 BEACON="$SCRIPT_DIR/beacon.sh"
 
 command -v jq >/dev/null 2>&1 || {
@@ -129,7 +136,7 @@ echo "== B2: beacon ABSENCE past SLO -> alarm FIRES + ROUTES =="
   out="$("$BEACON" check --slo-seconds 5 2>&1)"
   rc=$?
   [ "$rc" -eq 1 ] || fail_msg "B2: a stale-past-SLO beacon must FIRE the absence alarm (exit 1); got $rc [$out]"
-  echo "$out" | grep -qi 'ALARM FIRED' || fail_msg "B2: absence must announce the alarm fired [$out]"
+  echo "$out" | has_match -qi 'ALARM FIRED' || fail_msg "B2: absence must announce the alarm fired [$out]"
   [ -s "$ALARM_OUT" ] || fail_msg "B2: the alarm must actually ROUTE to the sink (payload not written)"
   jq -e '.kind == "beacon-absence-alarm"' "$ALARM_OUT" >/dev/null 2>&1 || fail_msg "B2: routed payload must be a beacon-absence-alarm [$(cat "$ALARM_OUT" 2>/dev/null)]"
   # NEVER-received is also an absence (depends on nothing the dying host does).
@@ -150,13 +157,13 @@ echo "== B3: unconfigured OR unreachable ALARM target -> FAIL LOUD =="
   out="$("$BEACON" check --slo-seconds 5 2>&1)"
   rc=$?
   [ "$rc" -eq 3 ] || fail_msg "B3a: unconfigured alarm target must FAIL LOUD (exit 3); got $rc [$out]"
-  echo "$out" | grep -qi 'silent no-alarm host' || fail_msg "B3a: the failure must name the silent-no-alarm-host hazard [$out]"
+  echo "$out" | has_match -qi 'silent no-alarm host' || fail_msg "B3a: the failure must name the silent-no-alarm-host hazard [$out]"
   # (b) UNREACHABLE alarm sink (non-zero exit).
   export WAKE_ALARM_SINK_CMD="false"
   out2="$("$BEACON" check --slo-seconds 5 2>&1)"
   rc2=$?
   [ "$rc2" -eq 3 ] || fail_msg "B3b: unreachable alarm target must FAIL LOUD (exit 3); got $rc2 [$out2]"
-  echo "$out2" | grep -qi 'UNREACHABLE' || fail_msg "B3b: the failure must name the unreachable target [$out2]"
+  echo "$out2" | has_match -qi 'UNREACHABLE' || fail_msg "B3b: the failure must name the unreachable target [$out2]"
 ) && ok
 
 echo "== B4: isolated host -> DEGRADED different-supervision-root beacon FLAGGED =="
@@ -169,8 +176,8 @@ echo "== B4: isolated host -> DEGRADED different-supervision-root beacon FLAGGED
   rc=$?
   err="$(cat "$TMP_ROOT/b4.err")"
   [ "$rc" -eq 0 ] || fail_msg "B4: a different-supervision-root emit must still succeed (exit 0); got $rc [$out][$err]"
-  echo "$err" | grep -qi 'DEGRADED' || fail_msg "B4: a different-supervision-root beacon must be FLAGGED degraded on stderr [$err]"
-  echo "$out" | grep -q 'degraded=true' || fail_msg "B4: emit must NOT silently present a degraded beacon as healthy (degraded=true expected) [$out]"
+  echo "$err" | has_match -qi 'DEGRADED' || fail_msg "B4: a different-supervision-root beacon must be FLAGGED degraded on stderr [$err]"
+  echo "$out" | has_match -q 'degraded=true' || fail_msg "B4: emit must NOT silently present a degraded beacon as healthy (degraded=true expected) [$out]"
 ) && ok
 
 echo "== B5: same-host-sibling -> REJECTED as non-independent, seq NOT advanced =="
@@ -182,7 +189,7 @@ echo "== B5: same-host-sibling -> REJECTED as non-independent, seq NOT advanced
   out="$("$BEACON" emit 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "B5: a same-host-sibling beacon must be REJECTED (non-zero exit) [$out]"
-  echo "$out" | grep -qi 'not an independent' || fail_msg "B5: the rejection must explain it is NOT an independent leg [$out]"
+  echo "$out" | has_match -qi 'not an independent' || fail_msg "B5: the rejection must explain it is NOT an independent leg [$out]"
   # A rejected emit must not have minted a seq (rejection precedes counter bump).
   seq_after="$("$BEACON" status 2>/dev/null | sed -n 's/^beacon_emitter_seq=//p')"
   [ "${seq_after:-0}" -eq 0 ] || fail_msg "B5: a rejected emit must NOT advance the monotonic seq (got $seq_after)"
@@ -201,10 +208,10 @@ echo "== B6: alarm target resolved BY NAME; beacon.sh inlines no endpoint/secret
   out="$("$BEACON" check --slo-seconds 5 2>&1)"
   rc=$?
   [ "$rc" -eq 1 ] || fail_msg "B6: absence via a by-name alarm adapter must fire (exit 1); got $rc [$out]"
-  head -n1 "$ALARM_OUT" 2>/dev/null | grep -qF "$SECRET_TARGET" || fail_msg "B6: the adapter must resolve+route to the BY-NAME target [$(cat "$ALARM_OUT" 2>/dev/null)]"
+  head -n1 "$ALARM_OUT" 2>/dev/null | has_match -qF "$SECRET_TARGET" || fail_msg "B6: the adapter must resolve+route to the BY-NAME target [$(cat "$ALARM_OUT" 2>/dev/null)]"
   # The framework file must NOT inline the endpoint/secret: it only knows a NAME.
-  grep -qF "$SECRET_TARGET" "$BEACON" && fail_msg "B6: beacon.sh must NOT inline the target endpoint/secret"
-  grep -qF "$SECRET_TARGET" "$WAKE_ALARM_SINK_CMD" && fail_msg "B6: even the adapter must resolve by-name, not inline the secret"
+  has_match -qF "$SECRET_TARGET" "$BEACON" && fail_msg "B6: beacon.sh must NOT inline the target endpoint/secret"
+  has_match -qF "$SECRET_TARGET" "$WAKE_ALARM_SINK_CMD" && fail_msg "B6: even the adapter must resolve by-name, not inline the secret"
   true
 ) && ok
 
@@ -218,7 +225,7 @@ echo "== B7: unconfigured OR unreachable BEACON sink on emit -> FAIL LOUD =="
   out="$("$BEACON" emit 2>&1)"
   rc=$?
   [ "$rc" -eq 3 ] || fail_msg "B7a: unconfigured beacon sink must FAIL LOUD (exit 3); got $rc [$out]"
-  echo "$out" | grep -qi 'silent no-alarm host' || fail_msg "B7a: the failure must name the silent-no-alarm-host hazard [$out]"
+  echo "$out" | has_match -qi 'silent no-alarm host' || fail_msg "B7a: the failure must name the silent-no-alarm-host hazard [$out]"
   # A refused emit (no sink) must not have minted a seq.
   seq_after="$("$BEACON" status 2>/dev/null | sed -n 's/^beacon_emitter_seq=//p')"
   [ "${seq_after:-0}" -eq 0 ] || fail_msg "B7a: an unconfigured-sink emit must NOT advance the seq (got $seq_after)"
@@ -227,7 +234,7 @@ echo "== B7: unconfigured OR unreachable BEACON sink on emit -> FAIL LOUD =="
   out2="$("$BEACON" emit 2>&1)"
   rc2=$?
   [ "$rc2" -eq 1 ] || fail_msg "B7b: unreachable beacon sink must FAIL LOUD (exit 1); got $rc2 [$out2]"
-  echo "$out2" | grep -qi 'UNREACHABLE' || fail_msg "B7b: the failure must name the unreachable sink [$out2]"
+  echo "$out2" | has_match -qi 'UNREACHABLE' || fail_msg "B7b: the failure must name the unreachable sink [$out2]"
 ) && ok
 
 echo "== B8: no invented SLO -> check --slo-seconds is REQUIRED (fail-loud) =="
@@ -238,7 +245,7 @@ echo "== B8: no invented SLO -> check --slo-seconds is REQUIRED (fail-loud) =="
   out="$("$BEACON" check 2>&1)"
   rc=$?
   [ "$rc" -eq 3 ] || fail_msg "B8: check without an SLO must fail loud (exit 3); got $rc [$out]"
-  echo "$out" | grep -qi 'slo' || fail_msg "B8: the usage error must name the missing SLO [$out]"
+  echo "$out" | has_match -qi 'slo' || fail_msg "B8: the usage error must name the missing SLO [$out]"
 ) && ok
 
 echo "== B9: capture-pane hint is a liveness HINT ONLY (does NOT suppress absence) =="
@@ -267,7 +274,7 @@ echo "== B10: fresh beacon within SLO -> ALIVE (exit 0, no alarm) =="
   out="$("$BEACON" check --slo-seconds 60 2>&1)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "B10: a fresh beacon within SLO must be ALIVE (exit 0); got $rc [$out]"
-  echo "$out" | grep -qi 'ALIVE' || fail_msg "B10: a fresh beacon must report ALIVE [$out]"
+  echo "$out" | has_match -qi 'ALIVE' || fail_msg "B10: a fresh beacon must report ALIVE [$out]"
   [ ! -s "$ALARM_OUT" ] || fail_msg "B10: a fresh beacon must NOT fire an alarm"
 ) && ok
 
@@ -291,7 +298,7 @@ echo "== B11: staleness from monitor ingested_ts -> a far-future emit_ts STILL g
   jq -c --argjson ing "$((now - 100))" '.ingested_ts = $ing' "$WAKE_BEACON_RECEIVED" >"$H/tmp" && mv "$H/tmp" "$WAKE_BEACON_RECEIVED"
   out="$("$BEACON" check --slo-seconds 5 2>&1)"; rc=$?
   [ "$rc" -eq 1 ] || fail_msg "B11: a far-future emit_ts must NOT defer staleness — receive-time governs (expected absence exit 1); got $rc [$out]"
-  echo "$out" | grep -qi 'ALARM FIRED' || fail_msg "B11: the receive-time-stale beacon must fire the absence alarm [$out]"
+  echo "$out" | has_match -qi 'ALARM FIRED' || fail_msg "B11: the receive-time-stale beacon must fire the absence alarm [$out]"
   jq -e '.age_seconds >= 100' "$ALARM_OUT" >/dev/null 2>&1 || fail_msg "B11: staleness age must be measured from ingested_ts (>=100s), not emit_ts [$(cat "$ALARM_OUT" 2>/dev/null)]"
 ) && ok
 
@@ -329,7 +336,7 @@ else
   jq -c '.beacon_seq = 99999 | .host_id = "attacker"' "$SHIPPED" >"$spoof"
   out="$("$BEACON" record <"$spoof" 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "B12: a spoofed beacon (altered fields) must be REJECTED at record; got rc=$rc [$out]"
-  echo "$out" | grep -qi 'spoofed beacon' || fail_msg "B12: the rejection must name the spoof [$out]"
+  echo "$out" | has_match -qi 'spoofed beacon' || fail_msg "B12: the rejection must name the spoof [$out]"
   [ ! -s "$WAKE_BEACON_RECEIVED" ] || fail_msg "B12: a rejected spoof must NOT be stored (dead-man clock not advanced)"
   # (c) an UNSIGNED beacon is rejected when signing is configured.
   unsigned="$H/unsigned.json"
@@ -337,14 +344,14 @@ else
   out2="$("$BEACON" record <"$unsigned" 2>&1)"; rc2=$?
   [ "$rc2" -ne 0 ] || fail_msg "B12: an unsigned beacon must be REJECTED when signing is configured; got rc=$rc2 [$out2]"
   # beacon.sh must not inline the key material.
-  grep -qF "test-beacon-hmac-key-do-not-echo" "$BEACON" && fail_msg "B12: beacon.sh must NOT inline the HMAC key"
+  has_match -qF "test-beacon-hmac-key-do-not-echo" "$BEACON" && fail_msg "B12: beacon.sh must NOT inline the HMAC key"
   true
 ) && ok
 fi
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake beacon harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake beacon harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake beacon harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-detector.sh

@@ -29,6 +29,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 DET="$SCRIPT_DIR/detector.sh"
 STORE="$SCRIPT_DIR/store.sh"
 
@@ -253,8 +260,8 @@ echo "== D5: watch-list schema_version out of manifest range -> FAIL LOUD =="
   err="$("$DET" poll-once 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "D5: an out-of-range schema_version must FAIL LOUD (non-zero exit)"
-  echo "$err" | grep -qi 'schema_version' || fail_msg "D5: the failure must name schema_version [$err]"
-  echo "$err" | grep -qi 'range' || fail_msg "D5: the failure must state it is out of the supported range [$err]"
+  echo "$err" | has_match -qi 'schema_version' || fail_msg "D5: the failure must name schema_version [$err]"
+  echo "$err" | has_match -qi 'range' || fail_msg "D5: the failure must state it is out of the supported range [$err]"
   # And nothing was enqueued / no cursor advance under a rejected watch-list.
   [ "$(depth)" = "0" ] || fail_msg "D5: a rejected watch-list must not enqueue, got depth $(depth)"
   [ "$(det_seq)" = "0" ] || fail_msg "D5: a rejected watch-list must not advance observed_seq, got $(det_seq)"
@@ -287,7 +294,7 @@ echo "== D6: source error / ambiguous-empty -> FAIL LOUD, observed_seq NOT advan
   err="$("$DET" poll-once 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "D6: a source error must FAIL LOUD (non-zero exit)"
-  echo "$err" | grep -qi 'FAIL LOUD' || fail_msg "D6: the source error must be loud [$err]"
+  echo "$err" | has_match -qi 'FAIL LOUD' || fail_msg "D6: the source error must be loud [$err]"
   [ "$(det_seq)" = "$seq_before" ] || fail_msg "D6: a source error must NOT advance observed_seq (got $(det_seq), was $seq_before)"
   [ "$(depth)" = "0" ] || fail_msg "D6: a source error must NOT enqueue, got depth $(depth)"
 
@@ -298,7 +305,7 @@ echo "== D6: source error / ambiguous-empty -> FAIL LOUD, observed_seq NOT advan
   err="$("$DET" poll-once 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "D6: an ambiguous-empty response must FAIL LOUD (non-zero exit)"
-  echo "$err" | grep -qi 'AMBIGUOUS-EMPTY' || fail_msg "D6: ambiguous-empty must be named in the loud failure [$err]"
+  echo "$err" | has_match -qi 'AMBIGUOUS-EMPTY' || fail_msg "D6: ambiguous-empty must be named in the loud failure [$err]"
   [ "$(det_seq)" = "$seq_before" ] || fail_msg "D6: ambiguous-empty must NOT advance observed_seq (got $(det_seq))"
   [ "$(depth)" = "0" ] || fail_msg "D6: ambiguous-empty must NOT enqueue, got depth $(depth)"
 
@@ -442,7 +449,7 @@ EOF
   write_fc_watchlist "$wl" 999
   err="$("$DET" poll-once 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "D9: the new field must NOT weaken Gate B — an out-of-range schema_version must still FAIL LOUD (rc=$rc)"
-  echo "$err" | grep -qi 'range' || fail_msg "D9: the out-of-range failure must still state it is out of the supported range [$err]"
+  echo "$err" | has_match -qi 'range' || fail_msg "D9: the out-of-range failure must still state it is out of the supported range [$err]"
 ) && ok
 
 echo "== D10: snapshot metadata (fd 3, #940) — adapter-attested sha/ts land in the enqueued locators =="
@@ -513,7 +520,7 @@ EOF
   printf 'SHA-BBB\n' >"$stub/repo_r1"
   err="$("$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D11: malformed metadata must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'snapshot' || fail_msg "D11: dropping malformed metadata must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'snapshot' || fail_msg "D11: dropping malformed metadata must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e '.locators | has("snapshot_sha") or has("snapshot_ts")' >/dev/null 2>&1 \
     && fail_msg "D11: malformed metadata must emit NO snapshot fields [$entry]"
@@ -522,7 +529,7 @@ EOF
   printf 'SHA-CCC\n' >"$stub/repo_r1"
   err="$("$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D11: rejected snapshot_sha must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'snapshot' || fail_msg "D11: rejecting a bad snapshot_sha must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'snapshot' || fail_msg "D11: rejecting a bad snapshot_sha must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e '.locators | has("snapshot_sha") or has("snapshot_ts")' >/dev/null 2>&1 \
     && fail_msg "D11: rejected metadata must emit NO snapshot fields [$entry]"
@@ -560,7 +567,7 @@ EOF
   printf 'SHA-BBB\n' >"$stub/repo_r1"
   err="$("$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D12: ts-without-sha must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'without a valid snapshot_sha' || fail_msg "D12: dropping ts-without-sha must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'without a valid snapshot_sha' || fail_msg "D12: dropping ts-without-sha must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e '.locators | has("snapshot_sha") or has("snapshot_ts")' >/dev/null 2>&1 \
     && fail_msg "D12: ts-without-sha must emit NO snapshot fields [$entry]"
@@ -571,7 +578,7 @@ EOF
   printf 'SHA-CCC\n' >"$stub/repo_r1"
   err="$("$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D12: future ts must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'future-skew' || fail_msg "D12: dropping a future ts must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'future-skew' || fail_msg "D12: dropping a future ts must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts") | not' >/dev/null 2>&1 \
     || fail_msg "D12: future ts must drop ts but KEEP the sha [$entry]"
@@ -581,7 +588,7 @@ EOF
   printf 'SHA-DDD\n' >"$stub/repo_r1"
   err="$("$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D12: absurd ts must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'sane positive epoch' || fail_msg "D12: rejecting an absurd ts must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'sane positive epoch' || fail_msg "D12: rejecting an absurd ts must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts") | not' >/dev/null 2>&1 \
     || fail_msg "D12: absurd ts must drop ts but KEEP the sha [$entry]"
@@ -621,7 +628,7 @@ EOF
   printf 'SHA-BBB\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK='300s' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: SLACK='300s' must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'falling back to 300' || fail_msg "D13: malformed slack must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'falling back to 300' || fail_msg "D13: malformed slack must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts")' >/dev/null 2>&1 \
     || fail_msg "D13: valid metadata must SURVIVE a malformed knob (fallback, not drop) [$entry]"
@@ -630,7 +637,7 @@ EOF
   printf 'SHA-CCC\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK='abc' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: SLACK='abc' must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'falling back to 300' || fail_msg "D13: non-numeric slack must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'falling back to 300' || fail_msg "D13: non-numeric slack must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts")' >/dev/null 2>&1 \
     || fail_msg "D13: valid metadata must SURVIVE a non-numeric knob [$entry]"
@@ -640,7 +647,7 @@ EOF
   printf 'SHA-DDD\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK='-99999999' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: negative SLACK must NEVER fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'falling back to 300' || fail_msg "D13: negative slack must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'falling back to 300' || fail_msg "D13: negative slack must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts")' >/dev/null 2>&1 \
     || fail_msg "D13: negative slack must NOT invert the guard into deny-all [$entry]"
@@ -652,7 +659,7 @@ EOF
   printf 'SHA-CC2\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK=$'300\n8' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: multi-line SLACK (300\\n8) must NEVER fail the poll (rc=$rc) [$err]"
-  echo "$err" | grep -qi 'falling back to 300' || fail_msg "D13: multi-line slack must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'falling back to 300' || fail_msg "D13: multi-line slack must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts")' >/dev/null 2>&1 \
     || fail_msg "D13: valid metadata must SURVIVE a multi-line knob [$entry]"
@@ -660,7 +667,7 @@ EOF
   printf 'SHA-CC3\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK=$'300\nabc' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: multi-line SLACK (300\\nabc) must NEVER fail the poll (rc=$rc) [$err]"
-  echo "$err" | grep -qi 'falling back to 300' || fail_msg "D13: multi-line non-numeric slack must be LOUD on stderr [$err]"
+  echo "$err" | has_match -qi 'falling back to 300' || fail_msg "D13: multi-line non-numeric slack must be LOUD on stderr [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts")' >/dev/null 2>&1 \
     || fail_msg "D13: valid metadata must SURVIVE a multi-line non-numeric knob [$entry]"
@@ -687,7 +694,7 @@ EOF
   printf 'SHA-EEE\n' >"$stub/repo_r1"
   err="$(WAKE_SNAPSHOT_TS_FUTURE_SLACK='0' "$DET" poll-once 2>&1 >/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D13: valid SLACK=0 must not fail the poll (rc=$rc)"
-  echo "$err" | grep -qi 'future-skew' || fail_msg "D13: a valid tightened slack must still reject a future ts [$err]"
+  echo "$err" | has_match -qi 'future-skew' || fail_msg "D13: a valid tightened slack must still reject a future ts [$err]"
   entry="$("$STORE" drain | tail -1)"
   echo "$entry" | jq -e --arg s "$goodsha" 'select(.locators.snapshot_sha==$s) | .locators | has("snapshot_ts") | not' >/dev/null 2>&1 \
     || fail_msg "D13: valid SLACK=0 must drop the future ts but keep the sha [$entry]"
@@ -696,7 +703,7 @@ EOF
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake detector harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake detector harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake detector harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-digest-hmac.sh

@@ -35,6 +35,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 STORE="$SCRIPT_DIR/store.sh"
 DIGEST="$SCRIPT_DIR/digest.sh"
 SIGN="$SCRIPT_DIR/sign.sh"
@@ -102,13 +109,13 @@ echo "== D1: CUMULATIVE-STATE — two pending changes BOTH render (not just late
   "$STORE" enqueue --seq 1 --class actionable --locators '{"repo":"r","issue":11}' >/dev/null
   "$STORE" enqueue --seq 2 --class actionable --locators '{"repo":"r","issue":22}' >/dev/null
   out="$("$DIGEST" render)" || fail_msg "D1: render exited non-zero"
-  echo "$out" | grep -q 'issue=#11' || fail_msg "D1: OLDER change (issue #11) dropped — digest is a delta, not cumulative state"
-  echo "$out" | grep -q 'issue=#22' || fail_msg "D1: newer change (issue #22) missing"
-  echo "$out" | grep -q 'seq 1' || fail_msg "D1: seq 1 not listed in cumulative set"
-  echo "$out" | grep -q 'seq 2' || fail_msg "D1: seq 2 not listed in cumulative set"
+  echo "$out" | has_match -q 'issue=#11' || fail_msg "D1: OLDER change (issue #11) dropped — digest is a delta, not cumulative state"
+  echo "$out" | has_match -q 'issue=#22' || fail_msg "D1: newer change (issue #22) missing"
+  echo "$out" | has_match -q 'seq 1' || fail_msg "D1: seq 1 not listed in cumulative set"
+  echo "$out" | has_match -q 'seq 2' || fail_msg "D1: seq 2 not listed in cumulative set"
   # A coalescing digest-class entry is STATE (full), not a delta: a later digest
   # subsumes the earlier, but the cumulative unacked set (both actionables) stays.
-  echo "$out" | grep -q 'pending=2' || fail_msg "D1: cumulative pending count wrong (expected 2)"
+  echo "$out" | has_match -q 'pending=2' || fail_msg "D1: cumulative pending count wrong (expected 2)"
 ) && ok
 
 echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARANTINED (fail-loud PER-ENTRY, #920); never delivered as valid =="
@@ -127,9 +134,9 @@ echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARAN
   # but the unlocated claim is NEVER delivered as a valid CLAIM (fail-loud is
   # preserved, now per-entry). The old exit-4 wedged the entire drain (#920).
   [ "$rc" -eq 0 ] || fail_msg "D2: a malformed actionable must be quarantined (render exit 0, #920), got $rc"
-  printf '%s' "$out" | grep -q 'mergeable=true' && fail_msg "D2: an unlocated actionable claim must NOT be delivered as a valid CLAIM"
-  grep -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2: the malformed claim must be DEAD-LETTERED (fail-loud preserved, per-entry)"
-  grep -qi 'QUARANTINE' "$err" || fail_msg "D2: a LOUD per-entry alarm must fire for the malformed claim"
+  printf '%s' "$out" | has_match -q 'mergeable=true' && fail_msg "D2: an unlocated actionable claim must NOT be delivered as a valid CLAIM"
+  has_match -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2: the malformed claim must be DEAD-LETTERED (fail-loud preserved, per-entry)"
+  has_match -qi 'QUARANTINE' "$err" || fail_msg "D2: a LOUD per-entry alarm must fire for the malformed claim"
 
   # A present-but-imprecise sha (not 40 hex) does NOT satisfy the hard locator ->
   # quarantined, not delivered.
@@ -140,8 +147,8 @@ echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARAN
   rc=0
   out="$("$DIGEST" render 2>/dev/null)" || rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D2: imprecise-sha entry must be quarantined (render exit 0), got $rc"
-  printf '%s' "$out" | grep -q 'ci=green' && fail_msg "D2: imprecise sha (not 40-hex) must not satisfy the hard-locator gate (claim must not deliver)"
-  grep -q 'ci=green' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2: imprecise-sha claim must be dead-lettered"
+  printf '%s' "$out" | has_match -q 'ci=green' && fail_msg "D2: imprecise sha (not 40-hex) must not satisfy the hard-locator gate (claim must not deliver)"
+  has_match -q 'ci=green' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2: imprecise-sha claim must be dead-lettered"
 
   # The SAME claim WITH a precise 40-hex sha renders fine (delivered, not quarantined).
   h="$(fresh_state d2c)"
@@ -149,7 +156,7 @@ echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARAN
   export WAKE_STATE_HOME
   "$STORE" enqueue --seq 1 --class actionable --locators "$(jq -cn --arg s "$SHA40" '{claim:"ci=green",sha:$s}')" >/dev/null
   out="$("$DIGEST" render 2>/dev/null)" || fail_msg "D2: a well-located actionable claim must render"
-  printf '%s' "$out" | grep -q "$SHA40" || fail_msg "D2: a well-located actionable claim must be DELIVERED"
+  printf '%s' "$out" | has_match -q "$SHA40" || fail_msg "D2: a well-located actionable claim must be DELIVERED"
   [ -s "$h/default/dead-letter.jsonl" ] && fail_msg "D2: a well-located claim must NOT be quarantined"
   # --- #905 bypass-prevention (STILL enforced, now via quarantine): a NON-
   # CANONICAL entry with a TOP-LEVEL `.claim` (store.sh never emits this shape;
@@ -164,8 +171,8 @@ echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARAN
   rc=0
   out="$(printf '%s\n' "$toplevel_claim_entry" | "$DIGEST" render --stdin 2>/dev/null)" || rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D2(#905): top-level .claim must be quarantined via --stdin (exit 0), got $rc"
-  printf '%s' "$out" | grep -q 'mergeable=true' && fail_msg "D2(#905): --stdin top-level-.claim must NOT be delivered (gate not bypassed)"
-  grep -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2(#905): --stdin top-level .claim must be dead-lettered (gate enforced)"
+  printf '%s' "$out" | has_match -q 'mergeable=true' && fail_msg "D2(#905): --stdin top-level-.claim must NOT be delivered (gate not bypassed)"
+  has_match -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2(#905): --stdin top-level .claim must be dead-lettered (gate enforced)"
   ff="$TMP_ROOT/d2d-entry.jsonl"
   printf '%s\n' "$toplevel_claim_entry" >"$ff"
   h="$(fresh_state d2e)"
@@ -174,8 +181,8 @@ echo "== D2: HARD-LOCATOR enforcement — a malformed actionable claim is QUARAN
   rc=0
   out2="$("$DIGEST" render --from-file "$ff" 2>/dev/null)" || rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D2(#905): top-level .claim must be quarantined via --from-file (exit 0), got $rc"
-  printf '%s' "$out2" | grep -q 'mergeable=true' && fail_msg "D2(#905): --from-file top-level-.claim must NOT be delivered (gate not bypassed)"
-  grep -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2(#905): --from-file top-level .claim must be dead-lettered (gate enforced)"
+  printf '%s' "$out2" | has_match -q 'mergeable=true' && fail_msg "D2(#905): --from-file top-level-.claim must NOT be delivered (gate not bypassed)"
+  has_match -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D2(#905): --from-file top-level .claim must be dead-lettered (gate enforced)"
 ) && ok
 
 echo "== D3: TWO-TIER — orientation no-op with ZERO tool calls; actionable = claim-to-verify =="
@@ -197,7 +204,7 @@ echo "== D3: TWO-TIER — orientation no-op with ZERO tool calls; actionable = c
   done
   # No pending obligations => no-op common case.
   out="$(PATH="$bin:$PATH" "$DIGEST" render --lane build)" || fail_msg "D3: no-op render failed"
-  echo "$out" | grep -q 'NO-OP' || fail_msg "D3: empty inbox must render an explicit NO-OP orientation"
+  echo "$out" | has_match -q 'NO-OP' || fail_msg "D3: empty inbox must render an explicit NO-OP orientation"
   [ -e "$WAKE_STATE_HOME/TOOL_CALLED" ] && fail_msg "D3: orientation no-op made a live tool call (must be ZERO)"
   # Now an actionable, consequential fact. It must be a CLAIM-TO-VERIFY, never
   # rendered as a trusted assertion or an auto-action.
@@ -206,14 +213,14 @@ echo "== D3: TWO-TIER — orientation no-op with ZERO tool calls; actionable = c
   out2="$(PATH="$bin:$PATH" "$DIGEST" render)" || fail_msg "D3: actionable render failed"
   # Rendering itself still makes ZERO live calls (it only lays out claims).
   [ -e "$WAKE_STATE_HOME/TOOL_CALLED" ] && fail_msg "D3: rendering an actionable claim made a live call (must defer to the consumer's gate)"
-  echo "$out2" | grep -q 'CLAIM@seq' || fail_msg "D3: consequential fact not framed as CLAIM@seq"
-  echo "$out2" | grep -qi 'VERIFY LIVE' || fail_msg "D3: claim not marked for live verification"
-  echo "$out2" | grep -qi 'do NOT act on this line' || fail_msg "D3: claim missing do-not-auto-action framing"
+  echo "$out2" | has_match -q 'CLAIM@seq' || fail_msg "D3: consequential fact not framed as CLAIM@seq"
+  echo "$out2" | has_match -qi 'VERIFY LIVE' || fail_msg "D3: claim not marked for live verification"
+  echo "$out2" | has_match -qi 'do NOT act on this line' || fail_msg "D3: claim missing do-not-auto-action framing"
   # The consequential fact must NOT appear as a bare trusted directive.
-  echo "$out2" | grep -qiE 'merge now|go ahead and (merge|deploy)|safe to merge' &&
+  echo "$out2" | has_match -qiE 'merge now|go ahead and (merge|deploy)|safe to merge' &&
     fail_msg "D3: digest auto-actioned a consequential fact (imperative present)"
   # And its hard locator + one-call re-verify hint are present.
-  echo "$out2" | grep -q "re-verify (ONE call)" || fail_msg "D3: actionable claim missing one-call re-verify locator"
+  echo "$out2" | has_match -q "re-verify (ONE call)" || fail_msg "D3: actionable claim missing one-call re-verify locator"
   true
 ) && ok
 
@@ -229,7 +236,7 @@ echo "== D4: SCRUB — secret-canary + ANSI/bidi/zero-width in source free-text
   "$STORE" enqueue --seq 1 --class actionable --locators "$loc" >/dev/null
   out="$("$DIGEST" render)" || fail_msg "D4: render failed"
   # ANSI escape / CSI must be gone.
-  printf '%s' "$out" | LC_ALL=C grep -q "$(printf '\x1b')" && fail_msg "D4: ANSI ESC survived the scrub"
+  printf '%s' "$out" | LC_ALL=C has_match -q "$(printf '\x1b')" && fail_msg "D4: ANSI ESC survived the scrub"
   # bidi/zero-width/BOM UTF-8 sequences must be gone.
   # #912: patterns are LITERAL bytes + `grep -E`, NOT PCRE `grep -P`. BusyBox
   # grep (Alpine/musl CI) has no `-P` — a `grep -qP` there errors
@@ -244,21 +251,21 @@ echo "== D4: SCRUB — secret-canary + ANSI/bidi/zero-width in source free-text
   _b8b="$(printf '%b' '\x8b')"; _b8f="$(printf '%b' '\x8f')"
   _baa="$(printf '%b' '\xaa')"; _bae="$(printf '%b' '\xae')"
   _bbom="$(printf '%b' '\xef\xbb\xbf')"
-  printf '%s' "$out" | LC_ALL=C grep -qE "${_b280}[${_b8b}-${_b8f}${_baa}-${_bae}]|${_bbom}" &&
+  printf '%s' "$out" | LC_ALL=C has_match -qE "${_b280}[${_b8b}-${_b8f}${_baa}-${_bae}]|${_bbom}" &&
     fail_msg "D4: bidi/zero-width/BOM survived the scrub"
   # C0 control bytes (except tab/newline) must be gone.
   _c00="$(printf '%b' '\x01')"; _c08="$(printf '%b' '\x08')"
   _c0e="$(printf '%b' '\x0e')"; _c1f="$(printf '%b' '\x1f')"; _c7f="$(printf '%b' '\x7f')"
-  printf '%s' "$out" | LC_ALL=C grep -qE "[${_c00}-${_c08}${_c0e}-${_c1f}${_c7f}]" &&
+  printf '%s' "$out" | LC_ALL=C has_match -qE "[${_c00}-${_c08}${_c0e}-${_c1f}${_c7f}]" &&
     fail_msg "D4: a C0 control byte survived the scrub"
   # Secret canaries must be redacted, never inlined.
-  printf '%s' "$out" | grep -q 'ghp_0123456789' && fail_msg "D4: GitHub-token canary LEAKED into the digest"
-  printf '%s' "$out" | grep -q 'AKIAIOSFODNN7EXAMPLE' && fail_msg "D4: AWS-key canary LEAKED into the digest"
-  printf '%s' "$out" | grep -q 'REDACTED-SECRET' || fail_msg "D4: secret redaction marker absent — canary may not have been scrubbed"
+  printf '%s' "$out" | has_match -q 'ghp_0123456789' && fail_msg "D4: GitHub-token canary LEAKED into the digest"
+  printf '%s' "$out" | has_match -q 'AKIAIOSFODNN7EXAMPLE' && fail_msg "D4: AWS-key canary LEAKED into the digest"
+  printf '%s' "$out" | has_match -q 'REDACTED-SECRET' || fail_msg "D4: secret redaction marker absent — canary may not have been scrubbed"
   # Free-text is quoted inside a DELIMITED untrusted block, framed as NOT instructions.
-  printf '%s' "$out" | grep -q 'BEGIN UNTRUSTED DATA' || fail_msg "D4: source free-text not placed in a delimited untrusted block"
+  printf '%s' "$out" | has_match -q 'BEGIN UNTRUSTED DATA' || fail_msg "D4: source free-text not placed in a delimited untrusted block"
   # The 40-hex git SHA locator must NOT be mangled by the secret scrubber.
-  printf '%s' "$out" | grep -q "$SHA40" || fail_msg "D4: legitimate 40-hex SHA locator was wrongly scrubbed"
+  printf '%s' "$out" | has_match -q "$SHA40" || fail_msg "D4: legitimate 40-hex SHA locator was wrongly scrubbed"
   true
 ) && ok
 
@@ -323,11 +330,11 @@ echo "== H2: KEY BY-NAME, never inline; no key leak; same-uid boundary documente
     fail_msg "H2: by-name key resolution failed"
   echo "$env1" | jq -e .wake_mac >/dev/null || fail_msg "H2: no MAC produced from by-name key"
   # The key VALUE must never appear in the signed output.
-  echo "$env1" | grep -q 'SUPERSECRET-KEYVALUE-XYZ' && fail_msg "H2: key material LEAKED into the signed envelope"
+  echo "$env1" | has_match -q 'SUPERSECRET-KEYVALUE-XYZ' && fail_msg "H2: key material LEAKED into the signed envelope"
   # A signed store-entry (hmac placeholder filled) must not leak the key either.
   entry="$(printf '{"observed_seq":1,"locators":{"repo":"r","issue":1},"class":"actionable","emit_ts":1700000000,"hmac":""}' |
     WAKE_HMAC_KEY_NAME=signing-key "$SIGN" sign-entry)"
-  echo "$entry" | grep -q 'SUPERSECRET-KEYVALUE-XYZ' && fail_msg "H2: key material LEAKED into the signed entry"
+  echo "$entry" | has_match -q 'SUPERSECRET-KEYVALUE-XYZ' && fail_msg "H2: key material LEAKED into the signed entry"
   echo "$entry" | jq -e '.hmac != "" and .hmac != null' >/dev/null || fail_msg "H2: sign-entry did not fill the hmac placeholder"
   # No flag may accept key MATERIAL inline — only a key NAME. An attempt to pass
   # a literal key must be rejected as an unknown option (never silently honored).
@@ -341,8 +348,8 @@ echo "== H2: KEY BY-NAME, never inline; no key leak; same-uid boundary documente
     fail_msg "H2: signing with an unresolvable key name must FAIL LOUD"
   fi
   # The same-uid threat boundary + off-uid follow-up must be DOCUMENTED in the tool.
-  grep -qi 'same-uid' "$SIGN" || fail_msg "H2: same-uid threat boundary not documented in sign.sh"
-  grep -qi 'off-uid' "$SIGN" || fail_msg "H2: off-uid future signer not named in sign.sh"
+  has_match -qi 'same-uid' "$SIGN" || fail_msg "H2: same-uid threat boundary not documented in sign.sh"
+  has_match -qi 'off-uid' "$SIGN" || fail_msg "H2: off-uid future signer not named in sign.sh"
 ) && ok
 
 echo "== D5 (#914a): EMBEDDED ACK NAMESPACE — env-less copy-run targets the RENDER-TIME agent, not 'default' =="
@@ -355,7 +362,7 @@ echo "== D5 (#914a): EMBEDDED ACK NAMESPACE — env-less copy-run targets the RE
   out="$(WAKE_AGENT=someagent "$DIGEST" render)" || fail_msg "D5: render (WAKE_AGENT=someagent) failed"
   ack_line="$(printf '%s\n' "$out" | awk '/^-- ACK/{f=1;next} f && NF {print; exit}')"
   [ -n "$ack_line" ] || fail_msg "D5: no embedded ack line extracted from the digest"
-  printf '%s' "$ack_line" | grep -q 'WAKE_AGENT=someagent' ||
+  printf '%s' "$ack_line" | has_match -q 'WAKE_AGENT=someagent' ||
     fail_msg "D5: embedded ack line has no explicit WAKE_AGENT=someagent prefix — an env-less copy-run silently resolves to 'default' [$ack_line]"
   # Actually RUN it with NO WAKE_AGENT in the environment (the real failure
   # mode: a consumer copy-pastes the line into a fresh shell).
@@ -401,12 +408,12 @@ echo "== D6 (#914b): DIGEST-CLASS LOCATOR THREADING — ORIENTATION pointer carr
   loc="$(jq -cn '{kind:"repo", id:"r1", observed_hash:"deadbeefcafe0123456789abcdef0123456789abcdef0123456789abcdef01", remote:"example/repo"}')"
   "$STORE" enqueue --seq 1 --class digest --locators "$loc" >/dev/null
   out="$("$DIGEST" render)" || fail_msg "D6: render failed"
-  orientline="$(printf '%s\n' "$out" | grep -E '^\s*\* seq 1 \[digest\]')"
+  orientline="$(printf '%s\n' "$out" | has_match -E '^\s*\* seq 1 \[digest\]')"
   [ -n "$orientline" ] || fail_msg "D6: no ORIENTATION line found for seq 1"
-  printf '%s' "$orientline" | grep -qE 'locator: *$' &&
+  printf '%s' "$orientline" | has_match -qE 'locator: *$' &&
     fail_msg "D6: digest-class ORIENTATION pointer rendered an EMPTY locator despite a populated .locators field [$orientline]"
   # Must surface something a consumer can act on to re-verify.
-  printf '%s' "$orientline" | grep -qE 'remote=example/repo|id=r1|kind=repo' ||
+  printf '%s' "$orientline" | has_match -qE 'remote=example/repo|id=r1|kind=repo' ||
     fail_msg "D6: digest-class ORIENTATION pointer does not carry a usable locator [$orientline]"
 
   # --- ACTIONABLE-tier hard-locator FAIL-LOUD must be PRESERVED (now PER-ENTRY
@@ -421,14 +428,14 @@ echo "== D6 (#914b): DIGEST-CLASS LOCATOR THREADING — ORIENTATION pointer carr
   rc=0
   out="$("$DIGEST" render 2>"$err")" || rc=$?
   [ "$rc" -eq 0 ] || fail_msg "D6: a malformed actionable is now per-entry quarantined (render exit 0, #920), got $rc"
-  printf '%s' "$out" | grep -q 'mergeable=true' && fail_msg "D6: a malformed actionable claim must NOT be delivered as valid (fail-loud preserved)"
-  grep -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D6: a malformed actionable must be DEAD-LETTERED (fail-loud preserved, per-entry)"
-  grep -qi 'QUARANTINE' "$err" || fail_msg "D6: a malformed actionable must raise a loud per-entry alarm"
+  printf '%s' "$out" | has_match -q 'mergeable=true' && fail_msg "D6: a malformed actionable claim must NOT be delivered as valid (fail-loud preserved)"
+  has_match -q 'mergeable=true' "$h/default/dead-letter.jsonl" 2>/dev/null || fail_msg "D6: a malformed actionable must be DEAD-LETTERED (fail-loud preserved, per-entry)"
+  has_match -qi 'QUARANTINE' "$err" || fail_msg "D6: a malformed actionable must raise a loud per-entry alarm"
 ) && ok
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake digest/hmac harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake digest/hmac harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake digest/hmac harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-digest-quarantine.sh

@@ -117,6 +117,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 DIGEST="$SCRIPT_DIR/digest.sh"
 
 command -v jq >/dev/null 2>&1 || {
@@ -176,12 +183,12 @@ echo "== Q1 (a): malformed address-free {kind,id,observed_hash} QUARANTINES; cle
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q1: render must EXIT 0 (per-entry quarantine, not whole-digest exit-4), got rc=$rc"
-  printf '%s' "$out" | grep -q "$SHA40" || fail_msg "Q1: the clean sibling (sha $SHA40) must STILL be delivered in the same drain [head-of-line block]"
-  printf '%s' "$out" | grep -q 'MALFORMED-Q' && fail_msg "Q1: the quarantined entry must be EXCLUDED from the rendered digest"
+  printf '%s' "$out" | has_match -q "$SHA40" || fail_msg "Q1: the clean sibling (sha $SHA40) must STILL be delivered in the same drain [head-of-line block]"
+  printf '%s' "$out" | has_match -q 'MALFORMED-Q' && fail_msg "Q1: the quarantined entry must be EXCLUDED from the rendered digest"
   [ -f "$(dlq "$home")" ] || fail_msg "Q1: a durable dead-letter file must be written"
-  grep -q 'MALFORMED-Q' "$(dlq "$home")" 2>/dev/null || fail_msg "Q1: the malformed entry must be DEAD-LETTERED (accounted-for, not silently dropped)"
-  grep -qi 'QUARANTINE' "$err" || fail_msg "Q1: a LOUD per-entry alarm must fire on stderr"
-  grep -q 'observed_seq=1' "$err" || fail_msg "Q1: the alarm must identify the offending entry (observed_seq=1)"
+  has_match -q 'MALFORMED-Q' "$(dlq "$home")" 2>/dev/null || fail_msg "Q1: the malformed entry must be DEAD-LETTERED (accounted-for, not silently dropped)"
+  has_match -qi 'QUARANTINE' "$err" || fail_msg "Q1: a LOUD per-entry alarm must fire on stderr"
+  has_match -q 'observed_seq=1' "$err" || fail_msg "Q1: the alarm must identify the offending entry (observed_seq=1)"
 ) && ok
 
 echo "== Q2 (b): reconciler enumeration (reconciled:true) renders ORIENTATION-tier, NO exit-4 =="
@@ -200,8 +207,8 @@ echo "== Q2 (b): reconciler enumeration (reconciled:true) renders ORIENTATION-ti
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q2: a reconciler enumeration must NOT exit-4 (it is ORIENTATION-tier), got rc=$rc"
-  printf '%s' "$out" | grep -q 'id=ENUM-B' || fail_msg "Q2: the enumeration must render as an ORIENTATION pointer (id=ENUM-B via _locator_line)"
-  printf '%s' "$out" | grep -q 'CLAIM@seq' && fail_msg "Q2: an enumeration must NOT render as an ACTIONABLE CLAIM@seq"
+  printf '%s' "$out" | has_match -q 'id=ENUM-B' || fail_msg "Q2: the enumeration must render as an ORIENTATION pointer (id=ENUM-B via _locator_line)"
+  printf '%s' "$out" | has_match -q 'CLAIM@seq' && fail_msg "Q2: an enumeration must NOT render as an ACTIONABLE CLAIM@seq"
   [ -s "$(dlq "$home")" ] && fail_msg "Q2: an ORIENTATION-tier enumeration must NOT be quarantined/dead-lettered"
   true
 ) && ok
@@ -220,10 +227,10 @@ echo "== Q3 (c): TWO DISTINCT enumerations BOTH survive as SEPARATE orientation
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q3: two enumerations must render (exit 0), got rc=$rc"
-  n="$(printf '%s\n' "$out" | grep -c 'id=ENUM-C[12]' || true)"
+  n="$(printf '%s\n' "$out" | count_lines 'id=ENUM-C[12]' || true)"
   [ "$n" = "2" ] || fail_msg "Q3: BOTH distinct enumerations must survive as SEPARATE orientation pointers (expected 2, got $n) — neither coalesced away"
-  printf '%s' "$out" | grep -q 'id=ENUM-C1' || fail_msg "Q3: enumeration ENUM-C1 must be present"
-  printf '%s' "$out" | grep -q 'id=ENUM-C2' || fail_msg "Q3: enumeration ENUM-C2 must be present"
+  printf '%s' "$out" | has_match -q 'id=ENUM-C1' || fail_msg "Q3: enumeration ENUM-C1 must be present"
+  printf '%s' "$out" | has_match -q 'id=ENUM-C2' || fail_msg "Q3: enumeration ENUM-C2 must be present"
   [ -s "$(dlq "$home")" ] && fail_msg "Q3: enumerations must NOT be quarantined"
   true
 ) && ok
@@ -239,10 +246,10 @@ echo "== Q4: PRESERVED — a genuine malformed ACTIONABLE claim is STILL loud (d
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q4: render must exit 0 (per-entry quarantine), got rc=$rc"
-  printf '%s' "$out" | grep -q 'CLAIM-KEEP' && fail_msg "Q4: a malformed actionable must NOT be delivered as if valid"
-  printf '%s' "$out" | grep -q '(none) — no consequential claims pending' || fail_msg "Q4: with the only claim quarantined, the ACTIONABLE section must show (none)"
-  grep -q 'CLAIM-KEEP' "$(dlq "$home")" 2>/dev/null || fail_msg "Q4: the malformed actionable must be DEAD-LETTERED (loudly surfaced, not silent)"
-  grep -qi 'QUARANTINE' "$err" || fail_msg "Q4: the malformed actionable must raise a LOUD alarm"
+  printf '%s' "$out" | has_match -q 'CLAIM-KEEP' && fail_msg "Q4: a malformed actionable must NOT be delivered as if valid"
+  printf '%s' "$out" | has_match -q '(none) — no consequential claims pending' || fail_msg "Q4: with the only claim quarantined, the ACTIONABLE section must show (none)"
+  has_match -q 'CLAIM-KEEP' "$(dlq "$home")" 2>/dev/null || fail_msg "Q4: the malformed actionable must be DEAD-LETTERED (loudly surfaced, not silent)"
+  has_match -qi 'QUARANTINE' "$err" || fail_msg "Q4: the malformed actionable must raise a LOUD alarm"
 ) && ok
 
 echo "== Q5: claim-precedence gated — a non-actionable-class entry carrying a claim (no hard locator) is STILL quarantined =="
@@ -258,8 +265,8 @@ echo "== Q5: claim-precedence gated — a non-actionable-class entry carrying a
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q5: render must exit 0, got rc=$rc"
-  grep -q 'CLAIMY' "$(dlq "$home")" 2>/dev/null || fail_msg "Q5: a claim-carrying entry with no hard locator must be quarantined (claim precedence, §2.1)"
-  printf '%s' "$out" | grep -q 'CI is green' && fail_msg "Q5: the un-verifiable claim must NOT be delivered"
+  has_match -q 'CLAIMY' "$(dlq "$home")" 2>/dev/null || fail_msg "Q5: a claim-carrying entry with no hard locator must be quarantined (claim precedence, §2.1)"
+  printf '%s' "$out" | has_match -q 'CI is green' && fail_msg "Q5: the un-verifiable claim must NOT be delivered"
   true
 ) && ok
 
@@ -278,11 +285,11 @@ echo "== Q6 (a): dead-lettered entry routes EXACTLY ONE off-host alarm (payload
   out="$("$DIGEST" render --from-file "$f" --agent default 2>"$err")"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q6: render must still EXIT 0 (per-entry quarantine, not whole-drain wedge), got rc=$rc"
-  n="$(grep -c . "$ALARM_OUT" 2>/dev/null || true)"
+  n="$(count_lines . "$ALARM_OUT" 2>/dev/null || true)"
   [ "$n" = "1" ] || fail_msg "Q6: EXACTLY ONE off-host alarm must route for the dead-lettered entry (got $n) [$(cat "$ALARM_OUT" 2>/dev/null)]"
-  grep -q '"observed_seq":21' "$ALARM_OUT" 2>/dev/null || fail_msg "Q6: the routed alarm payload must name the entry's observed_seq (21)"
-  grep -qi 'QUARANTINE' "$err" || fail_msg "Q6: the existing #920 stderr diagnostic must STILL fire (local + off-host, not either/or)"
-  printf '%s' "$out" | grep -q 'DLQ-Q6' && fail_msg "Q6: the quarantined entry must still be EXCLUDED from the rendered digest"
+  has_match -q '"observed_seq":21' "$ALARM_OUT" 2>/dev/null || fail_msg "Q6: the routed alarm payload must name the entry's observed_seq (21)"
+  has_match -qi 'QUARANTINE' "$err" || fail_msg "Q6: the existing #920 stderr diagnostic must STILL fire (local + off-host, not either/or)"
+  printf '%s' "$out" | has_match -q 'DLQ-Q6' && fail_msg "Q6: the quarantined entry must still be EXCLUDED from the rendered digest"
   true
 ) && ok
 
@@ -300,9 +307,9 @@ echo "== Q7 (b): re-draining the SAME still-dead-lettered entry N times routes Z
   for i in 1 2 3 4; do
     "$DIGEST" render --from-file "$f" --agent default >/dev/null 2>"$TMP_ROOT/q7.err.$i"
   done
-  n="$(grep -c . "$ALARM_OUT" 2>/dev/null || true)"
+  n="$(count_lines . "$ALARM_OUT" 2>/dev/null || true)"
   [ "$n" = "1" ] || fail_msg "Q7: re-draining the SAME dead-lettered entry 4x must route ONLY ONE off-host alarm total (durable dedup by observed_seq); got $n [$(cat "$ALARM_OUT" 2>/dev/null)]"
-  grep -qi 'QUARANTINE' "$TMP_ROOT/q7.err.4" || fail_msg "Q7: the #920 stderr diagnostic must STILL fire on every re-drain (only the off-host route is deduped)"
+  has_match -qi 'QUARANTINE' "$TMP_ROOT/q7.err.4" || fail_msg "Q7: the #920 stderr diagnostic must STILL fire on every re-drain (only the off-host route is deduped)"
 ) && ok
 
 echo "== Q8 (c): a NEW distinct dead-lettered entry routes its OWN one alarm (dedup is per-entry, not a global latch) =="
@@ -321,10 +328,10 @@ echo "== Q8 (c): a NEW distinct dead-lettered entry routes its OWN one alarm (de
   "$DIGEST" render --from-file "$f1" --agent default >/dev/null 2>/dev/null
   "$DIGEST" render --from-file "$f1" --agent default >/dev/null 2>/dev/null # re-drain seq 31 -> must NOT re-alarm
   "$DIGEST" render --from-file "$f2" --agent default >/dev/null 2>/dev/null # NEW distinct seq 32 -> its own alarm
-  n="$(grep -c . "$ALARM_OUT" 2>/dev/null || true)"
+  n="$(count_lines . "$ALARM_OUT" 2>/dev/null || true)"
   [ "$n" = "2" ] || fail_msg "Q8: two DISTINCT dead-lettered entries must together route exactly 2 off-host alarms total (got $n) [$(cat "$ALARM_OUT" 2>/dev/null)]"
-  grep -q '"observed_seq":31' "$ALARM_OUT" 2>/dev/null || fail_msg "Q8: seq 31's alarm must be present"
-  grep -q '"observed_seq":32' "$ALARM_OUT" 2>/dev/null || fail_msg "Q8: seq 32's (the new distinct entry's) OWN alarm must be present"
+  has_match -q '"observed_seq":31' "$ALARM_OUT" 2>/dev/null || fail_msg "Q8: seq 31's alarm must be present"
+  has_match -q '"observed_seq":32' "$ALARM_OUT" 2>/dev/null || fail_msg "Q8: seq 32's (the new distinct entry's) OWN alarm must be present"
 ) && ok
 
 echo "== Q9 (d): WAKE_ALARM_SINK_CMD unconfigured OR unreachable -> FAIL LOUD (never silent no-alarm); per-entry, render still exits 0 =="
@@ -340,9 +347,9 @@ echo "== Q9 (d): WAKE_ALARM_SINK_CMD unconfigured OR unreachable -> FAIL LOUD (n
   out_a="$("$DIGEST" render --from-file "$f" --agent default 2>"$err_a")"
   rc_a=$?
   [ "$rc_a" -eq 0 ] || fail_msg "Q9a: per-entry quarantine must still exit 0 even when the off-host alarm sink is unconfigured (no whole-drain wedge), got rc=$rc_a"
-  grep -qi 'FAIL LOUD' "$err_a" || fail_msg "Q9a: an unconfigured off-host alarm target must FAIL LOUD on stderr [$(cat "$err_a")]"
-  grep -Eqi 'silent no-alarm|silent-miss|PERMANENTLY miss|permanent silent miss' "$err_a" || fail_msg "Q9a: the diagnostic must name the silent-miss hazard (G2a), mirroring beacon.sh's fail-closed wording [$(cat "$err_a")]"
-  printf '%s' "$out_a" | grep -q 'DLQ-Q9' && fail_msg "Q9a: the quarantined entry must still be EXCLUDED from the rendered digest"
+  has_match -qi 'FAIL LOUD' "$err_a" || fail_msg "Q9a: an unconfigured off-host alarm target must FAIL LOUD on stderr [$(cat "$err_a")]"
+  has_match -Eqi 'silent no-alarm|silent-miss|PERMANENTLY miss|permanent silent miss' "$err_a" || fail_msg "Q9a: the diagnostic must name the silent-miss hazard (G2a), mirroring beacon.sh's fail-closed wording [$(cat "$err_a")]"
+  printf '%s' "$out_a" | has_match -q 'DLQ-Q9' && fail_msg "Q9a: the quarantined entry must still be EXCLUDED from the rendered digest"
   true
 ) && ok
 (
@@ -355,9 +362,9 @@ echo "== Q9 (d): WAKE_ALARM_SINK_CMD unconfigured OR unreachable -> FAIL LOUD (n
   out_b="$("$DIGEST" render --from-file "$f" --agent default 2>"$err_b")"
   rc_b=$?
   [ "$rc_b" -eq 0 ] || fail_msg "Q9b: per-entry quarantine must still exit 0 even when the off-host alarm sink is unreachable, got rc=$rc_b"
-  grep -qi 'FAIL LOUD' "$err_b" || fail_msg "Q9b: an unreachable off-host alarm target must FAIL LOUD on stderr [$(cat "$err_b")]"
-  grep -qi 'UNREACHABLE' "$err_b" || fail_msg "Q9b: the diagnostic must name the unreachable target [$(cat "$err_b")]"
-  printf '%s' "$out_b" | grep -q 'DLQ-Q9' && fail_msg "Q9b: the quarantined entry must still be EXCLUDED from the rendered digest"
+  has_match -qi 'FAIL LOUD' "$err_b" || fail_msg "Q9b: an unreachable off-host alarm target must FAIL LOUD on stderr [$(cat "$err_b")]"
+  has_match -qi 'UNREACHABLE' "$err_b" || fail_msg "Q9b: the diagnostic must name the unreachable target [$(cat "$err_b")]"
+  printf '%s' "$out_b" | has_match -q 'DLQ-Q9' && fail_msg "Q9b: the quarantined entry must still be EXCLUDED from the rendered digest"
   true
 ) && ok
 
@@ -383,16 +390,16 @@ echo "== Q10: snapshot metadata (#940) — snapshot_sha/snapshot_ts render on th
   out="$("$DIGEST" render --from-file "$f" --agent default 2>/dev/null)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q10: render must succeed (rc=$rc)"
-  snapa_line="$(printf '%s\n' "$out" | grep 'id=SNAP-A' || true)"
-  printf '%s' "$snapa_line" | grep -q 'snapshot_sha=0123abc4567890def0123abc4567890def012345' \
+  snapa_line="$(printf '%s\n' "$out" | has_match 'id=SNAP-A' || true)"
+  printf '%s' "$snapa_line" | has_match -q 'snapshot_sha=0123abc4567890def0123abc4567890def012345' \
     || fail_msg "Q10: snapshot_sha must render on the ORIENTATION pointer line [$snapa_line]"
-  printf '%s' "$snapa_line" | grep -q 'snapshot_ts=1753850000' \
+  printf '%s' "$snapa_line" | has_match -q 'snapshot_ts=1753850000' \
     || fail_msg "Q10: snapshot_ts must render on the ORIENTATION pointer line (age = emit_ts - snapshot_ts, local arithmetic) [$snapa_line]"
-  printf '%s' "$out" | grep -q 'git show 0123abc4567890def0123abc4567890def012345:BOARD.md' \
+  printf '%s' "$out" | has_match -q 'git show 0123abc4567890def0123abc4567890def012345:BOARD.md' \
     || fail_msg "Q10: snapshot_sha+path must upgrade the actionable re-verify hint to a one-call git show"
   # The sibling without metadata must not grow empty snapshot_ fields.
-  snapb_line="$(printf '%s\n' "$out" | grep 'id=SNAP-B' || true)"
-  printf '%s' "$snapb_line" | grep -q 'snapshot_' \
+  snapb_line="$(printf '%s\n' "$out" | has_match 'id=SNAP-B' || true)"
+  printf '%s' "$snapb_line" | has_match -q 'snapshot_' \
     && fail_msg "Q10: an entry without metadata must render NO snapshot_ fields [$snapb_line]"
   true
 ) && ok
@@ -434,28 +441,28 @@ echo "== Q11 (#944): REAL detector-shape actionable RENDERS as CLAIM@seq; addres
   [ "$rc" -eq 0 ] || fail_msg "Q11: render must exit 0, got rc=$rc"
   # (a) POSITIVE: the live entry RENDERS as an actionable claim (not merely
   #     passes the predicate) with the one-call git-show re-verify hint.
-  printf '%s' "$out" | grep -q 'seq 68 — CLAIM@seq' || fail_msg "Q11a: the live seq-68 detector-shape entry must RENDER as CLAIM@seq (positive control)"
-  printf '%s' "$out" | grep -q 'git show 55d4909569d2b5fbccfec49ec9ca83db5049f3ce:docs/scratchpads/heartbeat-planning' \
+  printf '%s' "$out" | has_match -q 'seq 68 — CLAIM@seq' || fail_msg "Q11a: the live seq-68 detector-shape entry must RENDER as CLAIM@seq (positive control)"
+  printf '%s' "$out" | has_match -q 'git show 55d4909569d2b5fbccfec49ec9ca83db5049f3ce:docs/scratchpads/heartbeat-planning' \
     || fail_msg "Q11a: the rendered claim must carry the one-call re-verify hint git show <snapshot_sha>:<path>"
   # (b) POSITIVE: path arm alone suffices; hint degrades to one-call re-read.
-  printf '%s' "$out" | grep -q 'seq 69 — CLAIM@seq' || fail_msg "Q11b: a path-only detector-shape entry must RENDER as CLAIM@seq (path arm)"
-  printf '%s' "$out" | grep -q 're-read BOARD.md' || fail_msg "Q11b: the path-only claim must carry the one-call re-read <path> hint"
-  n_claims="$(printf '%s\n' "$out" | grep -c 'CLAIM@seq' || true)"
+  printf '%s' "$out" | has_match -q 'seq 69 — CLAIM@seq' || fail_msg "Q11b: a path-only detector-shape entry must RENDER as CLAIM@seq (path arm)"
+  printf '%s' "$out" | has_match -q 're-read BOARD.md' || fail_msg "Q11b: the path-only claim must carry the one-call re-read <path> hint"
+  n_claims="$(printf '%s\n' "$out" | count_lines 'CLAIM@seq' || true)"
   [ "$n_claims" = "2" ] || fail_msg "Q11: EXACTLY the two valid entries must render as CLAIM@seq (got $n_claims)"
   # (c)+(d) NEGATIVES retained: both quarantine, each with its OWN alarm.
-  printf '%s' "$out" | grep -q 'ADDR-FREE' && fail_msg "Q11c: the address-free entry must be EXCLUDED from the digest"
-  printf '%s' "$out" | grep -q 'SNAP-ONLY' && fail_msg "Q11d: no bare path-less snapshot_sha entry may appear in the digest (gate must not widen past board_file)"
-  grep -q 'ADDR-FREE' "$(dlq "$home")" 2>/dev/null || fail_msg "Q11c: the address-free entry must be DEAD-LETTERED"
+  printf '%s' "$out" | has_match -q 'ADDR-FREE' && fail_msg "Q11c: the address-free entry must be EXCLUDED from the digest"
+  printf '%s' "$out" | has_match -q 'SNAP-ONLY' && fail_msg "Q11d: no bare path-less snapshot_sha entry may appear in the digest (gate must not widen past board_file)"
+  has_match -q 'ADDR-FREE' "$(dlq "$home")" 2>/dev/null || fail_msg "Q11c: the address-free entry must be DEAD-LETTERED"
   for snap_id in SNAP-ONLY-40 SNAP-ONLY-7 SNAP-ONLY-64; do
-    grep -q "$snap_id" "$(dlq "$home")" 2>/dev/null || fail_msg "Q11d: the bare snapshot_sha entry ($snap_id) must be DEAD-LETTERED"
+    has_match -q "$snap_id" "$(dlq "$home")" 2>/dev/null || fail_msg "Q11d: the bare snapshot_sha entry ($snap_id) must be DEAD-LETTERED"
   done
-  grep -q 'heartbeat-planning' "$(dlq "$home")" 2>/dev/null && fail_msg "Q11a: the valid live entry must NOT be dead-lettered"
-  grep -q 'PILOT-LOCAL' "$(dlq "$home")" 2>/dev/null && fail_msg "Q11b: the valid path-only entry must NOT be dead-lettered"
-  n_alarms="$(grep -c . "$ALARM_OUT" 2>/dev/null || true)"
+  has_match -q 'heartbeat-planning' "$(dlq "$home")" 2>/dev/null && fail_msg "Q11a: the valid live entry must NOT be dead-lettered"
+  has_match -q 'PILOT-LOCAL' "$(dlq "$home")" 2>/dev/null && fail_msg "Q11b: the valid path-only entry must NOT be dead-lettered"
+  n_alarms="$(count_lines . "$ALARM_OUT" 2>/dev/null || true)"
   [ "$n_alarms" = "4" ] || fail_msg "Q11: exactly the four invalid entries must alarm (got $n_alarms) [$(cat "$ALARM_OUT" 2>/dev/null)]"
-  grep -q '"observed_seq":70' "$ALARM_OUT" 2>/dev/null || fail_msg "Q11c: seq 70's own alarm must be present"
+  has_match -q '"observed_seq":70' "$ALARM_OUT" 2>/dev/null || fail_msg "Q11c: seq 70's own alarm must be present"
   for snap_seq in 71 72 73; do
-    grep -q "\"observed_seq\":$snap_seq" "$ALARM_OUT" 2>/dev/null || fail_msg "Q11d: seq $snap_seq's own alarm must be present"
+    has_match -q "\"observed_seq\":$snap_seq" "$ALARM_OUT" 2>/dev/null || fail_msg "Q11d: seq $snap_seq's own alarm must be present"
   done
   true
 ) && ok
@@ -477,15 +484,15 @@ echo "== Q12 (#946): quarantined entries are DISCLOSED (by seq, content withheld
   [ "$rc" -eq 0 ] || fail_msg "Q12: render must exit 0, got rc=$rc"
   # DISCLOSURE: a held entry must be VISIBLE in the digest it was held from —
   # a silent hold is how five successive digests each stepped past seq 68...
-  printf '%s' "$out" | grep -q 'QUARANTINED' || fail_msg "Q12: the digest must carry a QUARANTINED disclosure section (no silent hold)"
-  printf '%s' "$out" | grep -q 'seq 2 .*HELD' || fail_msg "Q12: the disclosure must name the held seq (2) as HELD"
+  printf '%s' "$out" | has_match -q 'QUARANTINED' || fail_msg "Q12: the digest must carry a QUARANTINED disclosure section (no silent hold)"
+  printf '%s' "$out" | has_match -q 'seq 2 .*HELD' || fail_msg "Q12: the disclosure must name the held seq (2) as HELD"
   # ...but WITHOUT re-injecting the refused content: disclosure is by seq only;
   # the Q1/Q4/Q5/Q6/Q9/Q11 exclusion property stands.
-  printf '%s' "$out" | grep -q 'ADDR-Q12' && fail_msg "Q12: the quarantined entry's content/locators must stay EXCLUDED from the digest"
+  printf '%s' "$out" | has_match -q 'ADDR-Q12' && fail_msg "Q12: the quarantined entry's content/locators must stay EXCLUDED from the digest"
   # CLAMP: the embedded ack stops BELOW the quarantined seq, and says so loudly.
-  printf '%s' "$out" | grep -Eq 'consumed --upto 1$' || fail_msg "Q12: the embedded ack must be CLAMPED to --upto 1 (below quarantined seq 2)"
-  printf '%s' "$out" | grep -Eq 'consumed --upto 2( |$)' && fail_msg "Q12: the raw observed cursor (2) must NOT be embedded while seq 2 is quarantined"
-  printf '%s' "$out" | grep -q 'ACK CLAMPED' || fail_msg "Q12: the clamp must be LOUDLY disclosed in the ACK section"
+  printf '%s' "$out" | has_match -Eq 'consumed --upto 1$' || fail_msg "Q12: the embedded ack must be CLAMPED to --upto 1 (below quarantined seq 2)"
+  printf '%s' "$out" | has_match -Eq 'consumed --upto 2( |$)' && fail_msg "Q12: the raw observed cursor (2) must NOT be embedded while seq 2 is quarantined"
+  printf '%s' "$out" | has_match -q 'ACK CLAMPED' || fail_msg "Q12: the clamp must be LOUDLY disclosed in the ACK section"
   # A foreign-data render must NOT rewrite the lane's quarantine truth.
   [ -e "$home/default/quarantined.set" ] && fail_msg "Q12: a --from-file render must NOT write the store's quarantined.set (lane truth is store-mode only)"
   true
@@ -503,9 +510,9 @@ echo "== Q13 (#946): nothing quarantined -> ack UNCLAMPED at the observed cursor
   out="$("$DIGEST" render --from-file "$f" --agent default 2>/dev/null)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q13: render must exit 0, got rc=$rc"
-  printf '%s' "$out" | grep -Eq 'consumed --upto 1$' || fail_msg "Q13: with nothing quarantined the ack must embed the observed cursor (1) unchanged"
-  printf '%s' "$out" | grep -q 'QUARANTINED' && fail_msg "Q13: no disclosure section when nothing is quarantined"
-  printf '%s' "$out" | grep -q 'ACK CLAMPED' && fail_msg "Q13: no clamp note when nothing is quarantined"
+  printf '%s' "$out" | has_match -Eq 'consumed --upto 1$' || fail_msg "Q13: with nothing quarantined the ack must embed the observed cursor (1) unchanged"
+  printf '%s' "$out" | has_match -q 'QUARANTINED' && fail_msg "Q13: no disclosure section when nothing is quarantined"
+  printf '%s' "$out" | has_match -q 'ACK CLAMPED' && fail_msg "Q13: no clamp note when nothing is quarantined"
   true
 ) && ok
 
@@ -520,8 +527,8 @@ echo "== Q14 (#946): store-mode render SYNCS quarantine truth into the store —
   out="$("$DIGEST" render --from-store --agent default 2>/dev/null)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q14: render must exit 0, got rc=$rc"
-  printf '%s' "$out" | grep -q 'QUARANTINED' || fail_msg "Q14: the store-mode digest must disclose the held entry"
-  printf '%s' "$out" | grep -Eq 'consumed --upto 1$' || fail_msg "Q14: the embedded ack must clamp to 1 (below quarantined seq 2)"
+  printf '%s' "$out" | has_match -q 'QUARANTINED' || fail_msg "Q14: the store-mode digest must disclose the held entry"
+  printf '%s' "$out" | has_match -Eq 'consumed --upto 1$' || fail_msg "Q14: the embedded ack must clamp to 1 (below quarantined seq 2)"
   qf="$home/default/quarantined.set"
   [ "$(cat "$qf" 2>/dev/null)" = "2" ] || fail_msg "Q14: a store-mode render must sync quarantined.set to exactly {2}, got [$(cat "$qf" 2>/dev/null)]"
   # END-TO-END: even a hand-typed upto past the held seq is refused at the
@@ -545,8 +552,8 @@ echo "== Q15 (#946): gate-fix RECOVERY — a stale quarantined.set is REPLACED b
   out="$("$DIGEST" render --from-store --agent default 2>/dev/null)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "Q15: render must exit 0, got rc=$rc"
-  printf '%s' "$out" | grep -q 'QUARANTINED' && fail_msg "Q15: nothing quarantines under the fixed gate — no disclosure section"
-  printf '%s' "$out" | grep -Eq 'consumed --upto 2$' || fail_msg "Q15: the ack must embed the full observed cursor (2) once the gate is fixed"
+  printf '%s' "$out" | has_match -q 'QUARANTINED' && fail_msg "Q15: nothing quarantines under the fixed gate — no disclosure section"
+  printf '%s' "$out" | has_match -Eq 'consumed --upto 2$' || fail_msg "Q15: the ack must embed the full observed cursor (2) once the gate is fixed"
   [ -s "$home/default/quarantined.set" ] && fail_msg "Q15: the clean render must REPLACE (clear) the stale quarantined.set — a cumulative-forever set would block acks on entries that now render, got [$(cat "$home/default/quarantined.set")]"
   "$STORE" consume --upto 2 >/dev/null 2>&1 || fail_msg "Q15: the ordinary consume must succeed after the clamp self-heals"
 ) && ok
@@ -557,7 +564,7 @@ echo "== Q16 (guard): Q2's ENUM-B fixture must STAY address-free — the reconci
   # Token concatenated so THIS guard's own source lines never contain the
   # literal fixture id and cannot self-match.
   enum_id='ENUM''-B'
-  fixture_line="$(grep -F "\"id\":\"$enum_id\"" "$self" | grep -F '"observed_seq":5' | head -n1)"
+  fixture_line="$(has_match -F "\"id\":\"$enum_id\"" "$self" | has_match -F '"observed_seq":5' | head -n1)"
   [ -n "$fixture_line" ] || fail_msg "Q16: could not locate Q2's $enum_id fixture line (renamed/renumbered? update this guard)"
   fixture_json="$(printf '%s' "$fixture_line" | sed "s/.*'\({.*}\)'.*/\1/")"
   # Positive controls FIRST (blind-instrument rule): the extraction must yield
@@ -578,7 +585,7 @@ echo "== Q16 (guard): Q2's ENUM-B fixture must STAY address-free — the reconci
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake digest-quarantine harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake digest-quarantine harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake digest-quarantine harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-fn-oracle.sh

@@ -25,6 +25,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 ORACLE="$SCRIPT_DIR/fn-oracle.sh"
 DET="$SCRIPT_DIR/detector.sh"
 
@@ -62,8 +69,8 @@ echo "== O1: healthy pipeline -> synthetic-canary FN-rate = 0 =="
   out="$("$ORACLE" run --slo-seconds 120 --count 3 2>&1)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "O1: a healthy pipeline must exit 0 (got $rc) [$out]"
-  echo "$out" | grep -q 'FN-RATE = 0/3' || fail_msg "O1: FN-rate must be 0/3 on a healthy pipeline [$out]"
-  echo "$out" | grep -q 'VERDICT = PASS' || fail_msg "O1: verdict must be PASS on a healthy pipeline [$out]"
+  echo "$out" | has_match -q 'FN-RATE = 0/3' || fail_msg "O1: FN-rate must be 0/3 on a healthy pipeline [$out]"
+  echo "$out" | has_match -q 'VERDICT = PASS' || fail_msg "O1: verdict must be PASS on a healthy pipeline [$out]"
 ) && ok
 
 echo "== O2: DISABLED detector (perfect no-op) -> FN-DETECTED (blindspot killer) =="
@@ -76,9 +83,9 @@ echo "== O2: DISABLED detector (perfect no-op) -> FN-DETECTED (blindspot killer)
   out="$("$ORACLE" run --slo-seconds 120 --count 3 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "O2: a detector that drops a KNOWN delta MUST fail the oracle (non-zero exit), even at a perfect no-op rate"
-  echo "$out" | grep -q 'FN-RATE = 3/3' || fail_msg "O2: every dropped canary must count as a false-negative (FN-RATE 3/3) [$out]"
-  echo "$out" | grep -q 'VERDICT = FN-DETECTED' || fail_msg "O2: verdict must be FN-DETECTED for a dropping detector [$out]"
-  echo "$out" | grep -qi 'never OBSERVED' || fail_msg "O2: the failure must name the dropped (never-observed) delta [$out]"
+  echo "$out" | has_match -q 'FN-RATE = 3/3' || fail_msg "O2: every dropped canary must count as a false-negative (FN-RATE 3/3) [$out]"
+  echo "$out" | has_match -q 'VERDICT = FN-DETECTED' || fail_msg "O2: verdict must be FN-DETECTED for a dropping detector [$out]"
+  echo "$out" | has_match -qi 'never OBSERVED' || fail_msg "O2: the failure must name the dropped (never-observed) delta [$out]"
 ) && ok
 
 echo "== O3: reached CONSUMED but too slow -> FN-DETECTED (within-SLO clause) =="
@@ -91,10 +98,10 @@ echo "== O3: reached CONSUMED but too slow -> FN-DETECTED (within-SLO clause) ==
   out="$("$ORACLE" run --slo-seconds 1 --count 1 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "O3: a canary that reaches CONSUMED past its SLO must be a false-negative (non-zero exit)"
-  echo "$out" | grep -qi 'per-class SLO' || fail_msg "O3: the failure must attribute to the per-class SLO, not a drop [$out]"
+  echo "$out" | has_match -qi 'per-class SLO' || fail_msg "O3: the failure must attribute to the per-class SLO, not a drop [$out]"
   # It must NOT be the 'never observed' branch: the delta WAS observed/delivered,
   # just too slowly. This proves O3 exercises the SLO clause specifically.
-  if echo "$out" | grep -qi 'never OBSERVED'; then
+  if echo "$out" | has_match -qi 'never OBSERVED'; then
     fail_msg "O3: an SLO breach must NOT be misreported as a dropped delta [$out]"
   fi
 ) && ok
@@ -110,7 +117,7 @@ echo "== O4: verdict is OFF-DOMAIN (from terminal consumed_seq, not detector sel
   out="$("$ORACLE" run --slo-seconds 120 --count 1 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "O4: a drive that exits 0 but delivers nothing must still be FN-DETECTED (verdict is off-domain)"
-  echo "$out" | grep -q 'VERDICT = FN-DETECTED' || fail_msg "O4: off-domain verdict must not be fooled by a clean exit code [$out]"
+  echo "$out" | has_match -q 'VERDICT = FN-DETECTED' || fail_msg "O4: off-domain verdict must not be fooled by a clean exit code [$out]"
 ) && ok
 
 echo "== O5: no invented SLO -> --slo-seconds is REQUIRED (fail-loud) =="
@@ -121,12 +128,12 @@ echo "== O5: no invented SLO -> --slo-seconds is REQUIRED (fail-loud) =="
   err="$("$ORACLE" run --count 1 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "O5: run without an SLO must fail loud (no invented default)"
-  echo "$err" | grep -qi 'slo' || fail_msg "O5: the usage error must name the missing SLO [$err]"
+  echo "$err" | has_match -qi 'slo' || fail_msg "O5: the usage error must name the missing SLO [$err]"
 ) && ok
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake fn-oracle harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake fn-oracle harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake fn-oracle harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-install.sh

@@ -34,6 +34,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 WI="$SCRIPT_DIR/wake-install.sh"
 BEACON="$SCRIPT_DIR/beacon.sh"
 FRAMEWORK_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"
@@ -94,7 +101,7 @@ EOF
   export WAKE_INSTALL_MANIFEST="$BAD_MANIFEST"
   out="$(bash "$WI" install 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I2: install must FAIL when a wake candidate is not framework-owned (got rc=$rc)"
-  echo "$out" | grep -qi 'Gate A VIOLATION' || fail_msg "I2: refusal must name the Gate A violation [$out]"
+  echo "$out" | has_match -qi 'Gate A VIOLATION' || fail_msg "I2: refusal must name the Gate A violation [$out]"
   # No partial write: the target must have received NO wake tool file.
   [ ! -e "$TGT/tools/wake/beacon.sh" ] || fail_msg "I2: a refused install must not have written any wake file (partial write leaked)"
   # And the positive control: with the REAL manifest, the same candidates install.
@@ -121,7 +128,7 @@ EOF
     || fail_msg "I3: blank-reset drop-in write failed"
   out="$(bash "$WI" verify-single "$UNIT" 2>&1)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "I3: blank-reset must resolve exactly one OnUnitActiveUSec (rc=$rc) [$out]"
-  echo "$out" | grep -qi 'EXACTLY ONE' || fail_msg "I3: verify must confirm exactly-one [$out]"
+  echo "$out" | has_match -qi 'EXACTLY ONE' || fail_msg "I3: verify must confirm exactly-one [$out]"
   # NEGATIVE CONTROL: a drop-in WITHOUT the reset line appends -> TWO values -> fail.
   cat >"$UD/$UNIT.d/interval.conf" <<'EOF'
 [Timer]
@@ -141,7 +148,7 @@ echo "== I4: snapshot-guard — reap without a snapshot is REFUSED; allowed afte
   # (a) reap WITHOUT snapshot -> refuse, unit still present.
   out="$(bash "$WI" reap-unit "$UNIT" 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I4: reap without a snapshot must be REFUSED (rc=$rc)"
-  echo "$out" | grep -qi 'snapshot-guard' || fail_msg "I4: refusal must name the snapshot-guard [$out]"
+  echo "$out" | has_match -qi 'snapshot-guard' || fail_msg "I4: refusal must name the snapshot-guard [$out]"
   [ -f "$UD/$UNIT" ] || fail_msg "I4: a refused reap must NOT delete the unit"
   # (b) snapshot, then reap -> allowed, unit gone, snapshot retained.
   bash "$WI" snapshot-unit "$UNIT" >/dev/null 2>&1 || fail_msg "I4: snapshot-unit failed"
@@ -161,28 +168,28 @@ echo "== I5: fail-closed install-validate — unconfigured HMAC/alarm FAIL LOUD;
   export WAKE_HMAC_KEY_NAME="primary"
   out="$(bash "$WI" validate-hmac-key 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I5: missing credential store must FAIL LOUD for the HMAC key (rc=$rc)"
-  echo "$out" | grep -qi 'UNSIGNED' || fail_msg "I5: HMAC failure must warn about unsigned wakes [$out]"
+  echo "$out" | has_match -qi 'UNSIGNED' || fail_msg "I5: HMAC failure must warn about unsigned wakes [$out]"
   # Now provide the key by-name -> pass, and the value must NEVER be echoed.
   jq -cn --arg k "$SECRET_KEY" '{wake:{hmac_keys:{"primary":$k}}}' >"$CRED"
   out2="$(bash "$WI" validate-hmac-key 2>&1)"; rc2=$?
   [ "$rc2" -eq 0 ] || fail_msg "I5: a by-name-resolvable HMAC key must pass (rc=$rc2) [$out2]"
-  echo "$out2" | grep -qF "$SECRET_KEY" && fail_msg "I5: validate must NEVER echo the HMAC key material"
+  echo "$out2" | has_match -qF "$SECRET_KEY" && fail_msg "I5: validate must NEVER echo the HMAC key material"
   # --- alarm target: unconfigured -> fail loud (silent no-alarm host).
   unset WAKE_ALARM_SINK_CMD
   out3="$(bash "$WI" validate-alarm-target 2>&1)"; rc3=$?
   [ "$rc3" -ne 0 ] || fail_msg "I5: unconfigured alarm target must FAIL LOUD (rc=$rc3)"
-  echo "$out3" | grep -qi 'silent no-alarm host' || fail_msg "I5: alarm failure must name the silent-no-alarm hazard [$out3]"
+  echo "$out3" | has_match -qi 'silent no-alarm host' || fail_msg "I5: alarm failure must name the silent-no-alarm hazard [$out3]"
   # unreachable -> fail loud.
   export WAKE_ALARM_SINK_CMD="false"
   out4="$(bash "$WI" validate-alarm-target 2>&1)"; rc4=$?
   [ "$rc4" -ne 0 ] || fail_msg "I5: unreachable alarm sink must FAIL LOUD (rc=$rc4)"
-  echo "$out4" | grep -qi 'UNREACHABLE' || fail_msg "I5: alarm failure must name the unreachable target [$out4]"
+  echo "$out4" | has_match -qi 'UNREACHABLE' || fail_msg "I5: alarm failure must name the unreachable target [$out4]"
   # reachable -> pass.
   export WAKE_ALARM_SINK_CMD="cat >/dev/null"
   bash "$WI" validate-alarm-target >/dev/null 2>&1 || fail_msg "I5: a configured+reachable alarm sink must pass"
   # The installer file must inline NO secret/endpoint.
-  grep -qF "$SECRET_ENDPOINT" "$WI" && fail_msg "I5: wake-install.sh must NOT inline any alarm endpoint"
-  grep -qE 'hmac_keys[^A-Za-z_].*=[^=].*[A-Za-z0-9]{8,}' "$WI" && fail_msg "I5: wake-install.sh must NOT inline key material"
+  has_match -qF "$SECRET_ENDPOINT" "$WI" && fail_msg "I5: wake-install.sh must NOT inline any alarm endpoint"
+  has_match -qE 'hmac_keys[^A-Za-z_].*=[^=].*[A-Za-z0-9]{8,}' "$WI" && fail_msg "I5: wake-install.sh must NOT inline key material"
   true
 ) && ok
 
@@ -204,7 +211,7 @@ echo "== I6: reset->verify->retire — overlap keeps legacy running; only §4-ve
   [ "$rc" -eq 0 ] || fail_msg "I6: overlap reset-verify must succeed (rc=$rc) [$out]"
   [ -f "$UD/$TIMER" ] || fail_msg "I6: overlap phase must LEAVE the legacy timer running (retire withheld)"
   [ -f "$SNAP/$TIMER" ] || fail_msg "I6: the legacy timer must be snapshotted before any retire"
-  echo "$out" | grep -qi 'LEFT RUNNING' || fail_msg "I6: overlap must announce retire is withheld [$out]"
+  echo "$out" | has_match -qi 'LEFT RUNNING' || fail_msg "I6: overlap must announce retire is withheld [$out]"
   # (b) §4-vector pass: retire LAST, snapshot-guarded (fallback proven live above).
   out2="$(bash "$WI" reset-verify-retire c --interval 30min --vector-passed 2>&1)"; rc2=$?
   [ "$rc2" -eq 0 ] || fail_msg "I6: vector-passed retire must succeed (rc=$rc2) [$out2]"
@@ -283,11 +290,11 @@ echo "== I9: dep-check — a host seed missing _lib/manifest.sh FAILS LOUD (name
   TGT="$(fresh i9-target)"
   out="$(WAKE_INSTALL_SOURCE="$FAKE" WAKE_INSTALL_TARGET="$TGT" bash "$WI_FAKE" install 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I9: install MUST fail when _lib/manifest.sh is missing (rc=$rc)"
-  echo "$out" | grep -qi 'manifest.sh' || fail_msg "I9: the failure must NAME the missing library (manifest.sh) [$out]"
-  echo "$out" | grep -qiE 'REMEDY|mosaic update|re-seed|framework install' \
+  echo "$out" | has_match -qi 'manifest.sh' || fail_msg "I9: the failure must NAME the missing library (manifest.sh) [$out]"
+  echo "$out" | has_match -qiE 'REMEDY|mosaic update|re-seed|framework install' \
     || fail_msg "I9: the failure must give an actionable REMEDY, not just an error [$out]"
   # It must be a CLEAR fail-loud, NOT the obscure bare `source: No such file or directory`.
-  echo "$out" | grep -qi 'No such file or directory' \
+  echo "$out" | has_match -qi 'No such file or directory' \
     && fail_msg "I9: must not fail with a bare source error (obscure) [$out]"
   # Positive control: with the helper present (real framework root) install succeeds.
   TGT_OK="$(fresh i9-target-ok)"
@@ -313,10 +320,10 @@ echo "== I10: systemd search-path — install links mosaic-wake.service into the
   rm -f "$UD/mosaic-wake.service"
   out2="$(bash "$WI" validate-systemd-path 2>&1)"; rc2=$?
   [ "$rc2" -ne 0 ] || fail_msg "I10: validate must FAIL when the unit is not in the search path (rc=$rc2) [$out2]"
-  echo "$out2" | grep -qi 'search path' || fail_msg "I10: validate failure must name the search-path miss [$out2]"
+  echo "$out2" | has_match -qi 'search path' || fail_msg "I10: validate failure must name the search-path miss [$out2]"
   # (c) idempotent re-install: exactly one search-path entry, still resolvable.
   bash "$WI" install >/dev/null 2>&1 || fail_msg "I10: re-run install must succeed"
-  n="$(find "$UD" -maxdepth 1 -name 'mosaic-wake.service' | grep -c .)"
+  n="$(find "$UD" -maxdepth 1 -name 'mosaic-wake.service' | count_lines .)"
   [ "$n" -eq 1 ] || fail_msg "I10: re-install must not duplicate the search-path entry (found $n)"
   bash "$WI" validate-systemd-path >/dev/null 2>&1 || fail_msg "I10: re-install must keep the unit resolvable"
 ) && ok
@@ -334,12 +341,12 @@ echo "== I11: F7 — the legacy reap REFUSES unless the canon fallback wake is p
   #     it must REFUSE (schedulable floor not met).
   out0="$(bash "$WI" fallback-proven-live 2>&1)"; rc0=$?
   [ "$rc0" -ne 0 ] || fail_msg "I11: fallback-proven-live must FAIL when the fallback wake is not installed (rc=$rc0)"
-  echo "$out0" | grep -qi 'F7' || fail_msg "I11: the refusal must name the F7 precondition [$out0]"
+  echo "$out0" | has_match -qi 'F7' || fail_msg "I11: the refusal must name the F7 precondition [$out0]"
   # (b) NEGATIVE — vector-passed reap with NO live fallback must be REFUSED and the
   #     legacy timer LEFT RUNNING (never a coverage gap).
   out="$(bash "$WI" reset-verify-retire f --interval 30min --vector-passed 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I11: reap must be REFUSED without a proven-live fallback (rc=$rc)"
-  echo "$out" | grep -qi 'FALLBACK WAKE is not proven live' || fail_msg "I11: refusal must name the un-proven fallback [$out]"
+  echo "$out" | has_match -qi 'FALLBACK WAKE is not proven live' || fail_msg "I11: refusal must name the un-proven fallback [$out]"
   [ -f "$UD/$TIMER" ] || fail_msg "I11: a refused reap must LEAVE the legacy timer running (F7 — no coverage gap)"
   # (c) POSITIVE — provision the fallback at the schedulable floor, then the reap
   #     proceeds (F7 satisfied) and the legacy timer is retired.
@@ -367,11 +374,11 @@ echo "== I12: fallback drain — a STALLED detector still gets delivery via the
   # even with no detector running — no starvation of the drain.
   out="$(bash "$DIGEST" render --from-store 2>/dev/null)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "I12: the canon fallback drain must exit 0 (rc=$rc)"
-  echo "$out" | grep -q 'STALLED-DRAIN-MARK' \
+  echo "$out" | has_match -q 'STALLED-DRAIN-MARK' \
     || fail_msg "I12: the fallback drain must DELIVER the pending obligation a stalled detector left (no delivery starvation) [$out]"
   # Bind the invariant to the SHIPPED unit: its ExecStart must be this canon drain.
   UNIT="$FRAMEWORK_ROOT/systemd/user/mosaic-wake-fallback.service"
-  grep -qE '^ExecStart=.*digest\.sh render --from-store' "$UNIT" \
+  has_match -qE '^ExecStart=.*digest\.sh render --from-store' "$UNIT" \
     || fail_msg "I12: mosaic-wake-fallback.service ExecStart must fire the canon drain (digest.sh render --from-store)"
 ) && ok
 
@@ -391,11 +398,11 @@ echo "== I13: install links + validates the canon fallback timer+service into th
   rm -f "$UD/mosaic-wake-fallback.timer"
   out="$(bash "$WI" validate-fallback-units 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "I13: validate must FAIL when a fallback unit is not in the search path (rc=$rc) [$out]"
-  echo "$out" | grep -qi 'search path' || fail_msg "I13: validate failure must name the search-path miss [$out]"
+  echo "$out" | has_match -qi 'search path' || fail_msg "I13: validate failure must name the search-path miss [$out]"
   # (c) idempotent re-install: exactly one entry per unit, still resolvable.
   bash "$WI" install >/dev/null 2>&1 || fail_msg "I13: re-run install must succeed"
-  nt="$(find "$UD" -maxdepth 1 -name 'mosaic-wake-fallback.timer' | grep -c .)"
-  ns="$(find "$UD" -maxdepth 1 -name 'mosaic-wake-fallback.service' | grep -c .)"
+  nt="$(find "$UD" -maxdepth 1 -name 'mosaic-wake-fallback.timer' | count_lines .)"
+  ns="$(find "$UD" -maxdepth 1 -name 'mosaic-wake-fallback.service' | count_lines .)"
   [ "$nt" -eq 1 ] && [ "$ns" -eq 1 ] || fail_msg "I13: re-install must not duplicate the fallback entries (timer=$nt service=$ns)"
   bash "$WI" validate-fallback-units >/dev/null 2>&1 || fail_msg "I13: re-install must keep the fallback units resolvable"
 ) && ok
@@ -407,17 +414,17 @@ echo "== I14: per-class fallback cadence — blank-reset yields EXACTLY ONE OnUn
   TIMER="mosaic-wake-fallback.timer"
   # The shipped timer carries the base OnUnitActiveSec placeholder (=1h).
   cp "$FRAMEWORK_ROOT/systemd/user/$TIMER" "$UD/$TIMER"
-  grep -q '^OnUnitActiveSec=1h' "$UD/$TIMER" || fail_msg "I14: shipped fallback timer must carry a base OnUnitActiveSec placeholder"
+  has_match -q '^OnUnitActiveSec=1h' "$UD/$TIMER" || fail_msg "I14: shipped fallback timer must carry a base OnUnitActiveSec placeholder"
   # write-fallback-cadence writes the per-class cadence in BLANK-RESET form.
   out="$(bash "$WI" write-fallback-cadence 30min 2>&1)"; rc=$?
   [ "$rc" -eq 0 ] || fail_msg "I14: write-fallback-cadence must succeed + verify single (rc=$rc) [$out]"
-  echo "$out" | grep -qi 'exactly one' || fail_msg "I14: the cadence write must confirm exactly-one OnUnitActiveUSec [$out]"
+  echo "$out" | has_match -qi 'exactly one' || fail_msg "I14: the cadence write must confirm exactly-one OnUnitActiveUSec [$out]"
   [ -f "$UD/$TIMER.d/cadence.conf" ] || fail_msg "I14: the per-class cadence drop-in must be written under <timer>.d/"
   # Assert the blank-reset FORM: an empty `OnUnitActiveSec=` reset line IMMEDIATELY
   # FOLLOWED by the new value. Portable across GNU and BusyBox grep (Alpine CI) —
   # `grep -z` (NUL-data) is a GNU-only extension BusyBox grep does NOT support, so
   # match the reset line and require the value on the very next line (-A1) instead.
-  grep -A1 '^OnUnitActiveSec=$' "$UD/$TIMER.d/cadence.conf" | grep -qx 'OnUnitActiveSec=30min' \
+  has_match -A1 '^OnUnitActiveSec=$' "$UD/$TIMER.d/cadence.conf" | has_match -qx 'OnUnitActiveSec=30min' \
     || fail_msg "I14: the drop-in must use the blank-reset form (empty reset line, then the value)"
   bash "$WI" verify-single "$TIMER" >/dev/null 2>&1 || fail_msg "I14: base(1h)+blank-reset(30min) must resolve exactly one OnUnitActiveUSec"
   # NEGATIVE CONTROL: a drop-in WITHOUT the reset line appends -> base 1h + 30min -> two -> fail.
@@ -428,7 +435,7 @@ echo "== I14: per-class fallback cadence — blank-reset yields EXACTLY ONE OnUn
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake install harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake install harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake install harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-preimage.sh

@@ -46,6 +46,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 PRE="$SCRIPT_DIR/preimage.sh"
 STORE="$SCRIPT_DIR/store.sh"
 DET="$SCRIPT_DIR/detector.sh"
@@ -202,9 +209,9 @@ echo "== P4: credential-store PATH refused — bytes never captured (acceptance
   sd="$(state_dir)"
   row="$(tail -n1 "$sd/preimage/preimage-ledger.jsonl")"
   [ "$(jq -r '.captured' <<<"$row")" = "false" ] || fail_msg "P4: row must record captured=false [$row]"
-  jq -r '.refused // ""' <<<"$row" | grep -qi 'path' || fail_msg "P4: refusal must name the path deny [$row]"
+  jq -r '.refused // ""' <<<"$row" | has_match -qi 'path' || fail_msg "P4: refusal must name the path deny [$row]"
   # THE invariant: the secret bytes exist NOWHERE under the wake state dir.
-  if grep -rq "$secret" "$sd" 2>/dev/null; then
+  if has_match -rq "$secret" "$sd" 2>/dev/null; then
     fail_msg "P4: credential bytes leaked into the wake state dir"
   fi
 ) && ok
@@ -225,8 +232,8 @@ echo "== P5: secret-SHAPED content refused (refusal, not redaction) =="
   sd="$(state_dir)"
   row="$(tail -n1 "$sd/preimage/preimage-ledger.jsonl")"
   [ "$(jq -r '.captured' <<<"$row")" = "false" ] || fail_msg "P5: row must record captured=false [$row]"
-  jq -r '.refused // ""' <<<"$row" | grep -qi 'secret' || fail_msg "P5: refusal must name secret-shaped content [$row]"
-  if grep -rq "$tok" "$sd" 2>/dev/null; then
+  jq -r '.refused // ""' <<<"$row" | has_match -qi 'secret' || fail_msg "P5: refusal must name secret-shaped content [$row]"
+  if has_match -rq "$tok" "$sd" 2>/dev/null; then
     fail_msg "P5: secret-shaped bytes leaked into the wake state dir"
   fi
 ) && ok
@@ -275,7 +282,7 @@ echo "== P8: unresolvable adapter -> FAIL LOUD, never 'no change' (D2 class) =="
   unset WAKE_WATCH_LIST WAKE_PREIMAGE_EXTRA MOSAIC_HOME
   out="$("$PRE" check --enqueue 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "P8: an unobservable preimage definition must FAIL LOUD (rc=0)"
-  echo "$out" | grep -qi 'does not resolve' || fail_msg "P8: the failure must name the unresolvable adapter [$out]"
+  echo "$out" | has_match -qi 'does not resolve' || fail_msg "P8: the failure must name the unresolvable adapter [$out]"
 ) && ok
 
 echo "== P9: corrupt ledger -> REFUSE to compare/re-baseline =="
@@ -294,7 +301,7 @@ echo "== P9: corrupt ledger -> REFUSE to compare/re-baseline =="
   printf 'v2 changed\n' >"$fx/f.env"
   out="$("$PRE" check --enqueue 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "P9: a corrupt ledger must FAIL LOUD (rc=0)"
-  echo "$out" | grep -qi 'unparseable' || fail_msg "P9: the failure must name the corrupt ledger [$out]"
+  echo "$out" | has_match -qi 'unparseable' || fail_msg "P9: the failure must name the corrupt ledger [$out]"
   [ "$(wc -l <"$sd/preimage/preimage-ledger.jsonl")" = "$r1" ] || fail_msg "P9: nothing may be appended over corrupt history"
 ) && ok
 
@@ -314,7 +321,7 @@ echo "== P10: oversized file -> bytes refused, hash still recorded =="
   sd="$(state_dir)"
   row="$(tail -n1 "$sd/preimage/preimage-ledger.jsonl")"
   [ "$(jq -r '.captured' <<<"$row")" = "false" ] || fail_msg "P10: row must record captured=false [$row]"
-  jq -r '.refused // ""' <<<"$row" | grep -qi 'MAX_BYTES' || fail_msg "P10: refusal must name the size cap [$row]"
+  jq -r '.refused // ""' <<<"$row" | has_match -qi 'MAX_BYTES' || fail_msg "P10: refusal must name the size cap [$row]"
   sha="$(jq -r '.sha256' <<<"$row")"
   [ "$sha" = "$(sha256sum "$fx/big.bin" | awk '{print $1}')" ] || fail_msg "P10: hash must still be recorded [$row]"
   [ ! -f "$sd/preimage/objects/$sha" ] || fail_msg "P10: oversized bytes must NOT be stored"
@@ -362,7 +369,7 @@ echo "== P12: detector — preimage infra failure is LOUD but does not starve ob
   printf 'NOT-JSON-GARBAGE{{{\n' >"$sd/preimage/preimage-ledger.jsonl"
   out="$("$DET" poll-once 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "P12: the pass must exit non-zero on preimage infra failure"
-  echo "$out" | grep -qi 'preimage' || fail_msg "P12: the failure must name the preimage check [$out]"
+  echo "$out" | has_match -qi 'preimage' || fail_msg "P12: the failure must name the preimage check [$out]"
   n="$(find "$sd/detector" -name 'watch-*.hash' 2>/dev/null | wc -l | tr -d '[:space:]')"
   [ "$n" -ge 1 ] || fail_msg "P12: source observation must still proceed (no watch hash baselined)"
 ) && ok
@@ -397,10 +404,10 @@ echo "== P13: symlinked/renamed credential store refused on BOTH path forms (#96
   n="$(jq -r 'select(.captured == false) | .path' "$sd/preimage/preimage-ledger.jsonl" | wc -l | tr -d '[:space:]')"
   [ "$n" = "2" ] || fail_msg "P13: both decoys must record captured=false (got $n)"
   # THE invariant (decoy method): the planted bytes exist NOWHERE in state.
-  if grep -rq "$s1" "$sd" 2>/dev/null; then
+  if has_match -rq "$s1" "$sd" 2>/dev/null; then
     fail_msg "P13: renamed-target store bytes leaked into the wake state dir"
   fi
-  if grep -rq "$s2" "$sd" 2>/dev/null; then
+  if has_match -rq "$s2" "$sd" 2>/dev/null; then
     fail_msg "P13: prefix-less key bytes leaked into the wake state dir"
   fi
 ) && ok
@@ -423,7 +430,7 @@ echo "== P14: detector.env-class key — safe WITHOUT opt-in by polarity, refuse
   sd="$(state_dir)"
   row="$(tail -n1 "$sd/preimage/preimage-ledger.jsonl")"
   [ "$(jq -r '.captured' <<<"$row")" = "false" ] || fail_msg "P14a: extra must be record-only without opt-in [$row]"
-  if grep -rq "$hm" "$sd" 2>/dev/null; then
+  if has_match -rq "$hm" "$sd" 2>/dev/null; then
     fail_msg "P14a: key bytes leaked without any opt-in"
   fi
   # (b) The operator opts the env file in (the exact error the old usage text
@@ -434,8 +441,8 @@ echo "== P14: detector.env-class key — safe WITHOUT opt-in by polarity, refuse
   [ "$rc" -eq 0 ] || fail_msg "P14b: refusal is not an infra failure (rc=$rc) [$out]"
   row="$(tail -n1 "$sd/preimage/preimage-ledger.jsonl")"
   [ "$(jq -r '.captured' <<<"$row")" = "false" ] || fail_msg "P14b: opted-in key material must still refuse [$row]"
-  jq -r '.refused // ""' <<<"$row" | grep -qi 'secret' || fail_msg "P14b: refusal must name secret-shaped content [$row]"
-  if grep -rq "$hm" "$sd" 2>/dev/null; then
+  jq -r '.refused // ""' <<<"$row" | has_match -qi 'secret' || fail_msg "P14b: refusal must name secret-shaped content [$row]"
+  if has_match -rq "$hm" "$sd" 2>/dev/null; then
     fail_msg "P14b: key bytes leaked despite refusal"
   fi
 ) && ok
@@ -488,7 +495,7 @@ echo "== P16: deleted ledger over surviving objects/ — REFUSE to re-baseline (
   printf '# v3\n' >>"$fx/adapter.sh"
   out="$("$PRE" check --enqueue 2>&1)"; rc=$?
   [ "$rc" -ne 0 ] || fail_msg "P16: absent ledger over prior objects must FAIL LOUD (rc=0) [$out]"
-  echo "$out" | grep -qi 'REFUSING to re-baseline' || fail_msg "P16: the failure must name the refusal [$out]"
+  echo "$out" | has_match -qi 'REFUSING to re-baseline' || fail_msg "P16: the failure must name the refusal [$out]"
   [ ! -e "$sd/preimage/preimage-ledger.jsonl" ] || fail_msg "P16: the ledger must NOT be silently recreated over deleted history"
   [ "$(ls "$sd/preimage/objects" | wc -l | tr -d '[:space:]')" = "$nobj" ] || fail_msg "P16: prior objects must remain untouched"
   [ "$(depth)" = "0" ] || fail_msg "P16: the v2->v3 change must NOT be absorbed or enqueued from an unverifiable baseline (depth=$(depth))"
@@ -520,7 +527,7 @@ echo "== P17: allowlist symmetry — symlink to a DENIED target refuses; symlink
   sd="$(state_dir)"
   crow="$(jq -c --arg p "$(realpath "$fx/settings.json")" 'select(.path == $p)' "$sd/preimage/preimage-ledger.jsonl" | tail -n1)"
   [ "$(jq -r '.captured' <<<"$crow")" = "false" ] || fail_msg "P17: allowlisted symlink to a denied target must refuse [$crow]"
-  if grep -rq "$s" "$sd" 2>/dev/null; then
+  if has_match -rq "$s" "$sd" 2>/dev/null; then
     fail_msg "P17: credential bytes leaked via an allowlisted alias"
   fi
   brow="$(jq -c --arg p "$(realpath "$fx/alias.cfg")" 'select(.path == $p)' "$sd/preimage/preimage-ledger.jsonl" | tail -n1)"

packages/mosaic/framework/tools/wake/test-wake-reconcile.sh

@@ -29,6 +29,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 RECON="$SCRIPT_DIR/reconcile.sh"
 STORE="$SCRIPT_DIR/store.sh"
 DET="$SCRIPT_DIR/detector.sh"
@@ -87,7 +94,7 @@ EOF
   out="$("$RECON" inventory 2>&1)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "R1: a complete inventory must PASS (exit 0) [$out]"
-  echo "$out" | grep -qi 'COMPLETE' || fail_msg "R1: a complete inventory must report COMPLETE [$out]"
+  echo "$out" | has_match -qi 'COMPLETE' || fail_msg "R1: a complete inventory must report COMPLETE [$out]"
 ) && ok
 
 echo "== R2: OMITTED source -> FLAG (vacuous-pass prevented, not silently green) =="
@@ -106,8 +113,8 @@ EOF
   out="$("$RECON" inventory 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R2: an omitted (declared-but-unwatched) source must FLAG (non-zero), not silently pass"
-  echo "$out" | grep -qi 'r2' || fail_msg "R2: the flag must name the omitted source r2 [$out]"
-  echo "$out" | grep -qi 'vacuous' || fail_msg "R2: the flag must state the vacuous-pass is prevented [$out]"
+  echo "$out" | has_match -qi 'r2' || fail_msg "R2: the flag must name the omitted source r2 [$out]"
+  echo "$out" | has_match -qi 'vacuous' || fail_msg "R2: the flag must state the vacuous-pass is prevented [$out]"
 ) && ok
 
 echo "== R3: required_sources omission -> FLAG =="
@@ -126,7 +133,7 @@ EOF
   out="$("$RECON" inventory 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R3: a required_sources omission must FLAG (non-zero)"
-  echo "$out" | grep -qi "requires source 'r2'" || fail_msg "R3: the flag must name the required-but-omitted source r2 [$out]"
+  echo "$out" | has_match -qi "requires source 'r2'" || fail_msg "R3: the flag must name the required-but-omitted source r2 [$out]"
 ) && ok
 
 echo "== R4: dangling watch reference -> FLAG =="
@@ -144,7 +151,7 @@ EOF
   out="$("$RECON" inventory 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R4: a dangling reference must FLAG (non-zero)"
-  echo "$out" | grep -qi 'dangling' || fail_msg "R4: the flag must state it is dangling [$out]"
+  echo "$out" | has_match -qi 'dangling' || fail_msg "R4: the flag must state it is dangling [$out]"
 ) && ok
 
 echo "== R5/R6: pre-existing state -> UNACCOUNTED flag + enumerated into store; re-run 0 =="
@@ -173,14 +180,14 @@ EOF
   out="$("$RECON" reconcile 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R5: pre-existing unaccounted state must FLAG (non-zero) on first reconcile"
-  echo "$out" | grep -qi 'UNACCOUNTED=2' || fail_msg "R5: both pre-existing sources must be UNACCOUNTED [$out]"
+  echo "$out" | has_match -qi 'UNACCOUNTED=2' || fail_msg "R5: both pre-existing sources must be UNACCOUNTED [$out]"
   # R6: enumerated into the durable store — one entry per pre-existing source.
   [ "$(depth)" = "2" ] || fail_msg "R6: pre-existing state must be ENUMERATED into the store (depth 2), got $(depth)"
   # A follow-up reconcile now finds everything accounted -> 0 unaccounted.
   out2="$("$RECON" reconcile 2>&1)"
   rc2=$?
   [ "$rc2" -eq 0 ] || fail_msg "R6: a second reconcile must report 0 unaccounted (exit 0) [$out2]"
-  echo "$out2" | grep -qi 'UNACCOUNTED=0' || fail_msg "R6: second reconcile must be 0 unaccounted [$out2]"
+  echo "$out2" | has_match -qi 'UNACCOUNTED=0' || fail_msg "R6: second reconcile must be 0 unaccounted [$out2]"
   [ "$(depth)" = "2" ] || fail_msg "R6: a clean reconcile must NOT re-enumerate (depth still 2), got $(depth)"
 ) && ok
 
@@ -211,7 +218,7 @@ EOF
   out="$("$RECON" reconcile 2>&1)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "R7: state reflected in the inbox must be ACCOUNTED (exit 0) [$out]"
-  echo "$out" | grep -qi 'UNACCOUNTED=0' || fail_msg "R7: inbox-reflected state must be 0 unaccounted [$out]"
+  echo "$out" | has_match -qi 'UNACCOUNTED=0' || fail_msg "R7: inbox-reflected state must be 0 unaccounted [$out]"
   [ "$(depth)" = "1" ] || fail_msg "R7: reconciler must NOT double-enumerate inbox-reflected state (depth still 1), got $(depth)"
 ) && ok
 
@@ -236,7 +243,7 @@ EOF
   out="$("$RECON" reconcile 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R8: a source error must FAIL LOUD (non-zero exit)"
-  echo "$out" | grep -qi 'FAIL LOUD' || fail_msg "R8: the source error must be loud [$out]"
+  echo "$out" | has_match -qi 'FAIL LOUD' || fail_msg "R8: the source error must be loud [$out]"
   [ "$(depth)" = "0" ] || fail_msg "R8: a failed observation must NOT enumerate anything, got depth $(depth)"
 ) && ok
 
@@ -278,7 +285,7 @@ EOF
   out="$("$RECON" reconcile 2>&1)"
   rc=$?
   [ "$rc" -ne 0 ] || fail_msg "R9: pre-existing beta is unaccounted on this pass -> must FLAG (non-zero) [$out]"
-  echo "$out" | grep -qi 'UNACCOUNTED=1' || fail_msg "R9: only beta should be unaccounted (alpha is inbox-accounted) [$out]"
+  echo "$out" | has_match -qi 'UNACCOUNTED=1' || fail_msg "R9: only beta should be unaccounted (alpha is inbox-accounted) [$out]"
   [ "$(depth)" = "2" ] || fail_msg "R9: reconciler must ENUMERATE beta into the co-fed store (depth 2), got $(depth)"
 
   # A further detector delta on beta must allocate 3 — the unified allocator
@@ -292,8 +299,8 @@ EOF
   # already used, so this set would contain a duplicate (alias).
   seqs="$("$STORE" drain | jq -r '.observed_seq' | sort -n | tr '\n' ' ')"
   [ "$seqs" = "1 2 3 " ] || fail_msg "R9: co-fed observed_seqs must be distinct+gapless '1 2 3', got '$seqs' (a duplicate = the aliasing #908 dissolved)"
-  ndistinct="$("$STORE" drain | jq -r '.observed_seq' | sort -nu | grep -c .)"
-  ntotal="$("$STORE" drain | jq -r '.observed_seq' | grep -c .)"
+  ndistinct="$("$STORE" drain | jq -r '.observed_seq' | sort -nu | count_lines .)"
+  ntotal="$("$STORE" drain | jq -r '.observed_seq' | count_lines .)"
   [ "$ndistinct" = "$ntotal" ] || fail_msg "R9: aliasing detected — $ntotal entries but only $ndistinct distinct observed_seq"
   # The contiguous-prefix CONSUMED contract holds over the co-fed seqs.
   "$STORE" consume --upto 3 >/dev/null 2>&1 || fail_msg "R9: CONSUMED 3 must succeed over the gapless co-fed prefix"
@@ -333,7 +340,7 @@ EOF
   out="$("$RECON" reconcile 2>&1)"
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "R10: a consumed state must be ACCOUNTED (exit 0, no spurious rc=1 CRITICAL) [$out]"
-  echo "$out" | grep -qi 'UNACCOUNTED=0' || fail_msg "R10: a consumed state must be 0 unaccounted (no re-enumeration) [$out]"
+  echo "$out" | has_match -qi 'UNACCOUNTED=0' || fail_msg "R10: a consumed state must be 0 unaccounted (no re-enumeration) [$out]"
   [ "$(depth)" = "0" ] || fail_msg "R10: reconciler must NOT re-enumerate a consumed state (depth still 0 = no duplicate wake), got $(depth)"
 ) && ok
 
@@ -372,7 +379,7 @@ EOF
   [ "$rc" -ne 0 ] || fail_msg "R11: a genuine gap (r2) must still FLAG (non-zero) [$out]"
   # After #932: ONLY r2 is unaccounted (r1 suppressed by the store record). On
   # BASE both r1 and r2 re-enumerate (UNACCOUNTED=2) -> this assertion is red-first.
-  echo "$out" | grep -qi 'UNACCOUNTED=1' || fail_msg "R11: exactly ONE source (the gap r2) must be unaccounted; the consumed r1 must be suppressed [$out]"
+  echo "$out" | has_match -qi 'UNACCOUNTED=1' || fail_msg "R11: exactly ONE source (the gap r2) must be unaccounted; the consumed r1 must be suppressed [$out]"
   # Prove precisely WHICH state re-enumerated: the gap r2 IS enumerated, the
   # consumed r1 is NOT. (base re-enumerates r1 too -> the r1-absent assertion is
   # red-first; the r2-present assertion holds both before and after = no over-suppression.)
@@ -383,7 +390,7 @@ EOF
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake reconcile harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake reconcile harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake reconcile harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-store-ack.sh

@@ -42,6 +42,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 STORE="$SCRIPT_DIR/store.sh"
 ACK="$SCRIPT_DIR/ack.sh"
 
@@ -96,14 +103,14 @@ echo "== T1: three-cursor advancement =="
   "$STORE" enqueue --seq 1 --class actionable --locators '{"repo":"r","issue":1}' >/dev/null
   "$STORE" enqueue --seq 2 --class actionable --locators '{"repo":"r","issue":2}' >/dev/null
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'observed_seq=2' || fail_msg "T1: observed_seq should be 2 after enqueue 1,2 [$cur]"
-  echo "$cur" | grep -q 'consumed_seq=0' || fail_msg "T1: consumed_seq must NOT advance on enqueue (only on CONSUMED ack) [$cur]"
-  echo "$cur" | grep -q 'pending_depth=2' || fail_msg "T1: pending depth should be 2 [$cur]"
+  echo "$cur" | has_match -q 'observed_seq=2' || fail_msg "T1: observed_seq should be 2 after enqueue 1,2 [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=0' || fail_msg "T1: consumed_seq must NOT advance on enqueue (only on CONSUMED ack) [$cur]"
+  echo "$cur" | has_match -q 'pending_depth=2' || fail_msg "T1: pending depth should be 2 [$cur]"
   # consumed_seq advances only on CONSUMED.
   "$STORE" consume --upto 2 >/dev/null
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=2' || fail_msg "T1: consumed_seq should be 2 after CONSUMED 2 [$cur]"
-  echo "$cur" | grep -q 'pending_depth=0' || fail_msg "T1: pending drained after CONSUMED [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=2' || fail_msg "T1: consumed_seq should be 2 after CONSUMED 2 [$cur]"
+  echo "$cur" | has_match -q 'pending_depth=0' || fail_msg "T1: pending drained after CONSUMED [$cur]"
 ) && ok
 
 echo "== T2: digest coalesce-REPLACE vs actionable APPEND =="
@@ -116,16 +123,16 @@ echo "== T2: digest coalesce-REPLACE vs actionable APPEND =="
   "$STORE" enqueue --seq 3 --class digest --locators '{"head":"bbb"}' >/dev/null
   "$STORE" enqueue --seq 4 --class human --locators '{"from":"peer"}' >/dev/null
   out="$("$STORE" drain)"
-  ndigest="$(printf '%s\n' "$out" | jq -c 'select(.class=="digest")' | grep -c . || true)"
+  ndigest="$(printf '%s\n' "$out" | jq -c 'select(.class=="digest")' | count_lines . || true)"
   [ "$ndigest" = "1" ] || fail_msg "T2: digest must COALESCE to a single pending entry, got $ndigest"
   head="$(printf '%s\n' "$out" | jq -r 'select(.class=="digest") | .locators.head')"
   [ "$head" = "bbb" ] || fail_msg "T2: newest digest must REPLACE prior (expected bbb, got $head)"
-  nactionable="$(printf '%s\n' "$out" | jq -c 'select(.class=="actionable")' | grep -c . || true)"
-  nhuman="$(printf '%s\n' "$out" | jq -c 'select(.class=="human")' | grep -c . || true)"
+  nactionable="$(printf '%s\n' "$out" | jq -c 'select(.class=="actionable")' | count_lines . || true)"
+  nhuman="$(printf '%s\n' "$out" | jq -c 'select(.class=="human")' | count_lines . || true)"
   [ "$nactionable" = "1" ] || fail_msg "T2: actionable must APPEND (never replaced), got $nactionable"
   [ "$nhuman" = "1" ] || fail_msg "T2: human must APPEND / stay durable, got $nhuman"
   # Durability never bypassed: all classes present in the durable store.
-  total="$(printf '%s\n' "$out" | grep -c . || true)"
+  total="$(printf '%s\n' "$out" | count_lines . || true)"
   [ "$total" = "3" ] || fail_msg "T2: durable store should hold digest+actionable+human = 3, got $total"
 ) && ok
 
@@ -141,7 +148,7 @@ echo "== T3: contiguous-prefix CONSUMED (reject ack N while N-1 unconsumed) =="
     fail_msg "T3: CONSUMED 3 must be REJECTED while seq 2 is a gap (unconsumed)"
   fi
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=0' || fail_msg "T3: rejected CONSUMED must NOT advance the cursor [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=0' || fail_msg "T3: rejected CONSUMED must NOT advance the cursor [$cur]"
   # Also reject via the ack wrapper.
   if "$ACK" consumed --upto 3 --no-sync >/dev/null 2>&1; then
     fail_msg "T3: ack.sh CONSUMED 3 must be REJECTED over a gap"
@@ -150,11 +157,11 @@ echo "== T3: contiguous-prefix CONSUMED (reject ack N while N-1 unconsumed) =="
   "$STORE" enqueue --seq 2 --class actionable --locators '{}' >/dev/null
   "$ACK" consumed --upto 3 --no-sync >/dev/null 2>&1 || fail_msg "T3: CONSUMED 3 should succeed once gap at 2 is filled"
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=3' || fail_msg "T3: consumed_seq should be 3 after contiguous prefix filled [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=3' || fail_msg "T3: consumed_seq should be 3 after contiguous prefix filled [$cur]"
   # Cumulative + can't regress: CONSUMED 2 after 3 is an idempotent no-op.
   "$ACK" consumed --upto 2 --no-sync >/dev/null 2>&1 || fail_msg "T3: cumulative CONSUMED 2 (<=3) should be an idempotent success"
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=3' || fail_msg "T3: cursor must not regress below 3 [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=3' || fail_msg "T3: cursor must not regress below 3 [$cur]"
 ) && ok
 
 echo "== T4: wake_id DELIVERY-dedup (dup delivery = re-RECEIVE, never re-action) =="
@@ -169,7 +176,7 @@ echo "== T4: wake_id DELIVERY-dedup (dup delivery = re-RECEIVE, never re-action)
   [ "$r2" = "DUP" ] || fail_msg "T4: duplicate delivery of same wake_id should be DUP (re-RECEIVE), got '$r2'"
   # RECEIVED (delivery) must NEVER advance consumed_seq (delivery != consumption).
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=0' || fail_msg "T4: RECEIVED must not advance consumed_seq [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=0' || fail_msg "T4: RECEIVED must not advance consumed_seq [$cur]"
 ) && ok
 
 echo "== T5: atomic write-tmp+rename survives crash mid-write =="
@@ -189,7 +196,7 @@ echo "== T5: atomic write-tmp+rename survives crash mid-write =="
   drained="$("$STORE" drain)"
   printf '%s\n' "$drained" | jq -e . >/dev/null 2>&1 || fail_msg "T5: drain returned non-JSON — garbage temp corrupted the store"
   printf '%s\n' "$drained" | stream_any '.observed_seq==1' || fail_msg "T5: committed entry (seq 1) lost after simulated crash"
-  printf '%s\n' "$drained" | grep -q 999 && fail_msg "T5: uncommitted garbage (seq 999) leaked into the live store"
+  printf '%s\n' "$drained" | has_match -q 999 && fail_msg "T5: uncommitted garbage (seq 999) leaked into the live store"
   # A subsequent real mutation must succeed DESPITE the stale temp present.
   "$STORE" enqueue --seq 2 --class actionable --locators '{"issue":2}' >/dev/null || fail_msg "T5: enqueue after crash temp failed"
   # #927: the enqueue HOT PATH must NOT reap tmp files — an unconditional delete
@@ -198,7 +205,7 @@ echo "== T5: atomic write-tmp+rename survives crash mid-write =="
   # untouched by an enqueue; reaping it on the hot path is exactly the bug.
   [ -e "$STATE_DIR/.wake.tmp.crash12" ] || fail_msg "T5: the enqueue hot path must NOT delete tmp files off its own write (that hot-path reap was the #927 clobber)"
   d2="$("$STORE" drain)"
-  [ "$(printf '%s\n' "$d2" | grep -c .)" = "2" ] || fail_msg "T5: store not healthy after crash+recovery (expected 2 entries)"
+  [ "$(printf '%s\n' "$d2" | has_match -c .)" = "2" ] || fail_msg "T5: store not healthy after crash+recovery (expected 2 entries)"
   # Bounded accumulation is preserved via a MAINTENANCE reap (store.sh init /
   # detector tick), age-scoped so it only removes DEMONSTRABLY-orphaned tmps
   # (older than any plausible in-flight write) and never a live one. Age the
@@ -209,7 +216,7 @@ echo "== T5: atomic write-tmp+rename survives crash mid-write =="
   "$STORE" init >/dev/null 2>&1 || fail_msg "T5: store.sh init (maintenance) failed"
   [ -e "$STATE_DIR/.wake.tmp.crash12" ] && fail_msg "T5: maintenance reap (store.sh init) must remove a demonstrably-orphaned stale temp (bounded accumulation)"
   d3="$("$STORE" drain)"
-  [ "$(printf '%s\n' "$d3" | grep -c .)" = "2" ] || fail_msg "T5: store not healthy after maintenance reap (expected 2 entries)"
+  [ "$(printf '%s\n' "$d3" | has_match -c .)" = "2" ] || fail_msg "T5: store not healthy after maintenance reap (expected 2 entries)"
   printf '%s\n' "$d3" | jq -e . >/dev/null 2>&1 || fail_msg "T5: drain returned non-JSON after maintenance reap"
 ) && ok
 
@@ -254,12 +261,12 @@ echo "== T6: durability survives restart (retain until CONSUMED) =="
   # "Session 2": a brand-new process (this subshell invocation of store.sh) must
   # see the persisted entries — nothing was held in memory.
   d="$("$STORE" drain)"
-  [ "$(printf '%s\n' "$d" | grep -c .)" = "2" ] || fail_msg "T6: entries not retained across restart (expected 2)"
+  [ "$(printf '%s\n' "$d" | has_match -c .)" = "2" ] || fail_msg "T6: entries not retained across restart (expected 2)"
   printf '%s\n' "$d" | stream_any '.class=="human"' || fail_msg "T6: a human message was lost across restart (durability bypassed)"
   # Retained UNTIL consumed: after CONSUMED they are released.
   "$STORE" consume --upto 2 >/dev/null
   d2="$("$STORE" drain)"
-  n2="$(printf '%s\n' "$d2" | grep -c . || true)"
+  n2="$(printf '%s\n' "$d2" | count_lines . || true)"
   [ "$n2" = "0" ] || fail_msg "T6: entries should be released only AFTER CONSUMED (still $n2 pending)"
 ) && ok
 
@@ -296,7 +303,7 @@ EOF
   end="$(date +%s.%N)"
   elapsed_ms="$(awk -v s="$start" -v e="$end" 'BEGIN { printf "%d", (e - s) * 1000 }')"
   [ "$elapsed_ms" -lt 1500 ] || fail_msg "T7: ack path blocked ${elapsed_ms}ms — must return without waiting on the background sync"
-  echo "$out" | grep -q 'CONSUMED 1' || fail_msg "T7: CONSUMED not reported [$out]"
+  echo "$out" | has_match -q 'CONSUMED 1' || fail_msg "T7: CONSUMED not reported [$out]"
   # Local write is durable IMMEDIATELY (no network needed to record the ack).
   STATE_DIR="$WAKE_STATE_HOME/default"
   jq_any "$STATE_DIR/ack-ledger.jsonl" '.type=="CONSUMED" and .upto==1' ||
@@ -321,8 +328,8 @@ echo "== T8: SOLE store-side allocator — enqueue (no --seq) allocates contiguo
   [ "$s1" = "1" ] || fail_msg "T8: first store-allocated observed_seq must be 1, got '$s1'"
   [ "$s2" = "2" ] || fail_msg "T8: second store-allocated observed_seq must be 2 (contiguous), got '$s2'"
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'observed_seq=2' || fail_msg "T8: observed_seq cursor should be 2 [$cur]"
-  echo "$cur" | grep -q 'pending_depth=2' || fail_msg "T8: both allocations must be durably enqueued [$cur]"
+  echo "$cur" | has_match -q 'observed_seq=2' || fail_msg "T8: observed_seq cursor should be 2 [$cur]"
+  echo "$cur" | has_match -q 'pending_depth=2' || fail_msg "T8: both allocations must be durably enqueued [$cur]"
   # ANTI-SWALLOW: consume the prefix, then a LEGACY explicit --seq inside the
   # consumed prefix must FAIL LOUD (never the old silent seq<=consumed no-op).
   "$STORE" consume --upto 2 >/dev/null
@@ -331,7 +338,7 @@ echo "== T8: SOLE store-side allocator — enqueue (no --seq) allocates contiguo
     fail_msg "T8: explicit --seq 1 <= consumed_seq 2 must FAIL LOUD (anti-swallow), not be a silent no-op"
   fi
   err="$("$STORE" enqueue --seq 1 --class actionable --locators '{}' 2>&1 || true)"
-  echo "$err" | grep -qi 'anti-swallow' || fail_msg "T8: the refusal must name the anti-swallow guarantee [$err]"
+  echo "$err" | has_match -qi 'anti-swallow' || fail_msg "T8: the refusal must name the anti-swallow guarantee [$err]"
   after_depth="$("$STORE" cursors | sed -n 's/pending_depth=//p')"
   [ "$before_depth" = "$after_depth" ] || fail_msg "T8: a refused enqueue must not mutate the store (depth $before_depth->$after_depth)"
   # And the NEXT real allocation is > consumed (2) — never inside the prefix.
@@ -443,8 +450,8 @@ if command -v flock >/dev/null 2>&1; then
     [ -n "$a" ] && [ -n "$b" ] || fail_msg "T10: both concurrent enqueues must print an allocated seq (got '$a','$b')"
     [ "$a" != "$b" ] || fail_msg "T10: two concurrent enqueues must get DISTINCT seqs, both got '$a' (aliasing / lost write without the lock)"
     cur="$("$STORE" cursors)"
-    echo "$cur" | grep -q 'observed_seq=2' || fail_msg "T10: observed_seq must reach 2 after two enqueues [$cur]"
-    echo "$cur" | grep -q 'pending_depth=2' || fail_msg "T10: both entries must be durably stored (no lost write) [$cur]"
+    echo "$cur" | has_match -q 'observed_seq=2' || fail_msg "T10: observed_seq must reach 2 after two enqueues [$cur]"
+    echo "$cur" | has_match -q 'pending_depth=2' || fail_msg "T10: both entries must be durably stored (no lost write) [$cur]"
     # The two allocated seqs are exactly {1,2} (distinct, contiguous, gapless).
     lo="$a"; hi="$b"; [ "$a" -gt "$b" ] && { lo="$b"; hi="$a"; }
     { [ "$lo" = "1" ] && [ "$hi" = "2" ]; } || fail_msg "T10: concurrent seqs must be {1,2}, got {$lo,$hi}"
@@ -492,7 +499,7 @@ echo "== T11: final observed_seq cursor write FAILURE — fail loud + observed.s
   # the _atomic_write failure and returns 0).
   [ "$rc" -ne 0 ] || fail_msg "T11: an enqueue whose FINAL cursor write fails must EXIT NON-ZERO (fail loud), got rc=$rc"
   # The loud diagnostic names the cursor write (not a generic error).
-  grep -qi 'cursor' "$errfile" || fail_msg "T11: the failure diagnostic must name the observed_seq cursor write [$(cat "$errfile")]"
+  has_match -qi 'cursor' "$errfile" || fail_msg "T11: the failure diagnostic must name the observed_seq cursor write [$(cat "$errfile")]"
 
   # (2) The cursor did NOT advance — the allocation is NOT committed.
   obs_after="$("$STORE" cursors | sed -n 's/^observed_seq=//p')"
@@ -536,7 +543,7 @@ echo "== T12: #932 — consume records the last-consumed observed_hash per (kind
   r2h="$(jq -sr '[ .[] | select(.kind=="repo" and .id=="r2") ] | .[0].observed_hash' "$rec" 2>/dev/null)"
   [ "$r2h" = "HASH-C" ] || fail_msg "T12: repo/r2 must record HASH-C, got '$r2h'"
   # ADDITIVE: existing on-disk state files are unchanged/consistent post-consume.
-  "$STORE" cursors | grep -q 'consumed_seq=3' || fail_msg "T12: consumed_seq must be 3 after CONSUMED 3"
+  "$STORE" cursors | has_match -q 'consumed_seq=3' || fail_msg "T12: consumed_seq must be 3 after CONSUMED 3"
 ) && ok
 
 echo "== T13: #946 — ordinary consume REFUSES to advance past a quarantined seq (store + ack paths) =="
@@ -555,10 +562,10 @@ echo "== T13: #946 — ordinary consume REFUSES to advance past a quarantined se
     fail_msg "T13: ordinary consume --upto 3 must be REFUSED while seq 2 is quarantined"
   fi
   err="$("$STORE" consume --upto 3 2>&1 >/dev/null || true)"
-  echo "$err" | grep -q 'quarantined seq(s): 2' || fail_msg "T13: the refusal must NAME the quarantined seq [$err]"
-  echo "$err" | grep -q -- '--force-past-quarantine' || fail_msg "T13: the refusal must NAME the force flag [$err]"
+  echo "$err" | has_match -q 'quarantined seq(s): 2' || fail_msg "T13: the refusal must NAME the quarantined seq [$err]"
+  echo "$err" | has_match -q -- '--force-past-quarantine' || fail_msg "T13: the refusal must NAME the force flag [$err]"
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=0' || fail_msg "T13: a refused consume must NOT advance the cursor [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=0' || fail_msg "T13: a refused consume must NOT advance the cursor [$cur]"
   # BELOW the quarantined seq the ordinary path is unaffected.
   "$STORE" consume --upto 1 >/dev/null 2>&1 || fail_msg "T13: consume --upto 1 (below the quarantined seq) must succeed"
   # The ack wrapper propagates the refusal — no ordinary-path bypass exists.
@@ -566,7 +573,7 @@ echo "== T13: #946 — ordinary consume REFUSES to advance past a quarantined se
     fail_msg "T13: ack.sh consumed --upto 3 must be REFUSED while seq 2 is quarantined (ordinary-path bypass)"
   fi
   cur="$("$STORE" cursors)"
-  echo "$cur" | grep -q 'consumed_seq=1' || fail_msg "T13: cursor must still be 1 after the refused ack [$cur]"
+  echo "$cur" | has_match -q 'consumed_seq=1' || fail_msg "T13: cursor must still be 1 after the refused ack [$cur]"
 ) && ok
 
 echo "== T14: #946 — FORCED step-over is LOUD, prunes the set, and NEVER fabricates a consumed-hash row for the quarantined entry =="
@@ -585,9 +592,9 @@ echo "== T14: #946 — FORCED step-over is LOUD, prunes the set, and NEVER fabri
   rc=$?
   [ "$rc" -eq 0 ] || fail_msg "T14: forced consume must succeed (rc=$rc) [$(cat "$errf")]"
   [ "$out" = "3" ] || fail_msg "T14: forced consume must print the new cursor 3, got '$out'"
-  grep -q 'FORCED PAST QUARANTINE' "$errf" || fail_msg "T14: the forced path must be LOUD on stderr [$(cat "$errf")]"
-  grep -q 'seq 2' "$errf" || fail_msg "T14: the forced-path diagnostic must name the stepped-over seq 2 [$(cat "$errf")]"
-  "$STORE" cursors | grep -q 'consumed_seq=3' || fail_msg "T14: forced consume must advance the cursor to 3"
+  has_match -q 'FORCED PAST QUARANTINE' "$errf" || fail_msg "T14: the forced path must be LOUD on stderr [$(cat "$errf")]"
+  has_match -q 'seq 2' "$errf" || fail_msg "T14: the forced-path diagnostic must name the stepped-over seq 2 [$(cat "$errf")]"
+  "$STORE" cursors | has_match -q 'consumed_seq=3' || fail_msg "T14: forced consume must advance the cursor to 3"
   # NO FALSE WITNESS: the quarantined entry (repo/b) was NEVER delivered, so no
   # consumed-hash row may exist for it — even on the forced path (the reconciler
   # re-enumerating it once is safe-but-noisy; a false witness silences it
@@ -597,7 +604,7 @@ echo "== T14: #946 — FORCED step-over is LOUD, prunes the set, and NEVER fabri
   jq_any "$rec" '.kind=="repo" and .id=="b"' && fail_msg "T14: the quarantined entry repo/b must have NO consumed-hash row (a row would witness a delivery that never happened)"
   # The stepped-over seq is PRUNED from the set (it is consumed now; a stale
   # entry would re-refuse forever).
-  grep -qxF '2' "$qf" 2>/dev/null && fail_msg "T14: seq 2 must be PRUNED from quarantined.set after the forced step-over"
+  has_match -qxF '2' "$qf" 2>/dev/null && fail_msg "T14: seq 2 must be PRUNED from quarantined.set after the forced step-over"
   # The ack wrapper's force flag passes through, stays LOUD on stderr, and
   # still reports a CLEAN cursor line on stdout.
   "$STORE" enqueue --class actionable --locators '{"kind":"repo","id":"d","observed_hash":"HD"}' >/dev/null
@@ -607,8 +614,8 @@ echo "== T14: #946 — FORCED step-over is LOUD, prunes the set, and NEVER fabri
   out2="$("$ACK" consumed --upto 5 --no-sync --force-past-quarantine 2>"$errf2")"
   rc2=$?
   [ "$rc2" -eq 0 ] || fail_msg "T14: forced ack must succeed (rc=$rc2) [$(cat "$errf2")]"
-  echo "$out2" | grep -q '^CONSUMED 5$' || fail_msg "T14: forced ack must report a CLEAN cursor line 'CONSUMED 5', got '$out2'"
-  grep -q 'FORCED PAST QUARANTINE' "$errf2" || fail_msg "T14: the forced-path loudness must survive the ack wrapper (stderr) [$(cat "$errf2")]"
+  echo "$out2" | has_match -q '^CONSUMED 5$' || fail_msg "T14: forced ack must report a CLEAN cursor line 'CONSUMED 5', got '$out2'"
+  has_match -q 'FORCED PAST QUARANTINE' "$errf2" || fail_msg "T14: the forced-path loudness must survive the ack wrapper (stderr) [$(cat "$errf2")]"
   jq_any "$rec" '.kind=="repo" and .id=="e"' && fail_msg "T14: the quarantined repo/e must have NO consumed-hash row via the forced ack path either"
   true
 ) && ok
@@ -671,10 +678,10 @@ echo "== T16: #946 — quarantine-audit: a consumed-hash row matching a dead-let
   if "$STORE" quarantine-audit >"$rep" 2>&1; then
     fail_msg "T16: report-mode audit must exit NON-ZERO when false rows exist"
   fi
-  grep -q 'FALSE WITNESS' "$rep" || fail_msg "T16: the audit must name the false row loudly [$(cat "$rep")]"
-  grep -q '"id":"X"' "$rep" || fail_msg "T16: the audit must identify the false row (repo/X@1) [$(cat "$rep")]"
-  grep -q '"id":"Y"' "$rep" && fail_msg "T16: the clean row repo/Y must NOT be flagged"
-  grep -q '"id":"Z"' "$rep" && fail_msg "T16: the HEALED row repo/Z@4 must NOT be flagged (its dead-letter evidence is seq 3 with a different hash)"
+  has_match -q 'FALSE WITNESS' "$rep" || fail_msg "T16: the audit must name the false row loudly [$(cat "$rep")]"
+  has_match -q '"id":"X"' "$rep" || fail_msg "T16: the audit must identify the false row (repo/X@1) [$(cat "$rep")]"
+  has_match -q '"id":"Y"' "$rep" && fail_msg "T16: the clean row repo/Y must NOT be flagged"
+  has_match -q '"id":"Z"' "$rep" && fail_msg "T16: the HEALED row repo/Z@4 must NOT be flagged (its dead-letter evidence is seq 3 with a different hash)"
   # Report mode modifies nothing.
   jq_any "$rec" '.id=="X"' || fail_msg "T16: report mode must not modify the record"
   # REPAIR: exactly the false row is removed; the dead-letter LEDGER is history
@@ -683,10 +690,10 @@ echo "== T16: #946 — quarantine-audit: a consumed-hash row matching a dead-let
   jq_any "$rec" '.id=="X"' && fail_msg "T16: --repair must REMOVE the provably-false X row"
   jq_any "$rec" '.id=="Y" and .observed_hash=="HY"' || fail_msg "T16: --repair must keep the clean Y row"
   jq_any "$rec" '.id=="Z" and .observed_hash=="HZ-NEW" and .observed_seq==4' || fail_msg "T16: --repair must keep the healed Z@4 row"
-  [ "$(grep -c . "$dl")" = "2" ] || fail_msg "T16: the dead-letter LEDGER must be untouched by --repair"
+  [ "$(has_match -c . "$dl")" = "2" ] || fail_msg "T16: the dead-letter LEDGER must be untouched by --repair"
   # Clean re-audit: OK, exit 0.
   "$STORE" quarantine-audit >"$TMP_ROOT/t16.ok" 2>&1 || fail_msg "T16: a clean audit must exit 0 [$(cat "$TMP_ROOT/t16.ok")]"
-  grep -qi 'OK' "$TMP_ROOT/t16.ok" || fail_msg "T16: a clean audit must say OK [$(cat "$TMP_ROOT/t16.ok")]"
+  has_match -qi 'OK' "$TMP_ROOT/t16.ok" || fail_msg "T16: a clean audit must say OK [$(cat "$TMP_ROOT/t16.ok")]"
 ) && ok
 
 echo "== T17: #952 — the clean-sweep message names BOTH unprovable residual classes; a surviving-but-empty-hash dead-letter row is correctly NOT convicted =="
@@ -722,20 +729,20 @@ echo "== T17: #952 — the clean-sweep message names BOTH unprovable residual cl
   # match can never fire: this is unprovable class 2, NOT a false witness.
   rep="$TMP_ROOT/t17.rep"
   "$STORE" quarantine-audit >"$rep" 2>&1 || fail_msg "T17: the audit must exit 0 — nothing here is provable [$(cat "$rep")]"
-  grep -q 'FALSE WITNESS' "$rep" && fail_msg "T17: the empty-hash evidence must NOT convict (the predicate is correct and must not change) [$(cat "$rep")]"
+  has_match -q 'FALSE WITNESS' "$rep" && fail_msg "T17: the empty-hash evidence must NOT convict (the predicate is correct and must not change) [$(cat "$rep")]"
   # The wording under test (#952): BOTH residual classes, named.
-  grep -qi 'pruned' "$rep" || fail_msg "T17: clean sweep must name residual class 1 — evidence pruned away [$(cat "$rep")]"
-  grep -qi 'empty observed_hash' "$rep" || fail_msg "T17: clean sweep must name residual class 2 — surviving evidence with an empty observed_hash [$(cat "$rep")]"
+  has_match -qi 'pruned' "$rep" || fail_msg "T17: clean sweep must name residual class 1 — evidence pruned away [$(cat "$rep")]"
+  has_match -qi 'empty observed_hash' "$rep" || fail_msg "T17: clean sweep must name residual class 2 — surviving evidence with an empty observed_hash [$(cat "$rep")]"
   # --repair on a clean sweep removes nothing: the unprovable row survives.
   "$STORE" quarantine-audit --repair >"$TMP_ROOT/t17.fix" 2>&1 || fail_msg "T17: --repair on a clean sweep must exit 0 [$(cat "$TMP_ROOT/t17.fix")]"
   jq_any "$rec" '.kind=="bench" and .observed_seq==13 and .observed_hash=="H-REAL-CONSUMED"' ||
     fail_msg "T17: --repair must NOT remove the unprovable bench@13 row — the audit only removes what the ledger can convict"
-  [ "$(grep -c . "$dl")" = "1" ] || fail_msg "T17: the dead-letter LEDGER must be untouched"
+  [ "$(count_lines . "$dl")" = "1" ] || fail_msg "T17: the dead-letter LEDGER must be untouched"
 ) && ok
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake store/ack harness: FAILED ($(grep -c . "$FAILFILE") assertion(s))" >&2
+  echo "wake store/ack harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
   exit 1
 fi
 echo "wake store/ack harness: all invariants passed ($pass groups)"

packages/mosaic/framework/tools/wake/test-wake-store-enqueue-race.sh

@@ -32,6 +32,13 @@
 set -uo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.
+# shellcheck disable=SC1091
+if ! . "$SCRIPT_DIR/_wake-common.sh"; then
+  echo "WAKE-ASSERT INIT ABORT: cannot source _wake-common.sh — suite ran ZERO wake assertions (#984)" >&2
+  exit 97
+fi
+wake_assert_init
 STORE="$SCRIPT_DIR/store.sh"
 
 command -v jq >/dev/null 2>&1 || {
@@ -147,7 +154,7 @@ EOF
     wait "$pa" 2>/dev/null || true
   else
     # Confirm the window is genuinely open: A holds a live in-flight tmp now.
-    n_tmp="$(find "$STATE_DIR" -maxdepth 1 -name '.wake.tmp.*' -type f | grep -c . || true)"
+    n_tmp="$(find "$STATE_DIR" -maxdepth 1 -name '.wake.tmp.*' -type f | count_lines . || true)"
     [ "$n_tmp" -ge 1 ] || fail_msg "T-RACE: expected A's live in-flight tmp to exist while A holds the lock (got $n_tmp)"
 
     # B: its PRE-LOCK _wake_init_dir runs now (pre-fix: deletes A's live tmp),
@@ -173,7 +180,7 @@ EOF
     if [ "$ra" -ne 0 ]; then
       fail_msg "T-RACE: enqueue A was SPURIOUSLY ABORTED (rc=$ra) — its live in-flight tmp was deleted by B's pre-lock cleanup [#927]. stderr: $(tr '\n' ' ' <"$a_err")"
     fi
-    if grep -q 'durable pending write FAILED' "$a_err" 2>/dev/null; then
+    if has_match -q 'durable pending write FAILED' "$a_err" 2>/dev/null; then
       fail_msg "T-RACE: enqueue A reported 'durable pending write FAILED' — the exact #927 spurious abort (its tmp was clobbered mid-write by a concurrent pre-lock cleanup)."
     fi
     [ "$rb" -eq 0 ] || fail_msg "T-RACE: enqueue B should also succeed (rc=$rb). stderr: $(tr '\n' ' ' <"$b_err")"
@@ -189,20 +196,20 @@ EOF
 
     # #908 store invariants: both durably landed, cursor reached 2, no burned seq.
     cur="$("$STORE" cursors)"
-    echo "$cur" | grep -q 'observed_seq=2' || fail_msg "T-RACE: observed_seq must reach 2 (both allocations committed) [$cur]"
-    echo "$cur" | grep -q 'pending_depth=2' || fail_msg "T-RACE: both entries must be durably stored — no lost/aborted write [$cur]"
-    echo "$cur" | grep -q 'consumed_seq=0' || fail_msg "T-RACE: enqueue must never advance consumed_seq [$cur]"
+    echo "$cur" | has_match -q 'observed_seq=2' || fail_msg "T-RACE: observed_seq must reach 2 (both allocations committed) [$cur]"
+    echo "$cur" | has_match -q 'pending_depth=2' || fail_msg "T-RACE: both entries must be durably stored — no lost/aborted write [$cur]"
+    echo "$cur" | has_match -q 'consumed_seq=0' || fail_msg "T-RACE: enqueue must never advance consumed_seq [$cur]"
     # Gapless: the contiguous prefix 1..2 is consumable (no interior gap/burn).
     "$STORE" consume --upto 2 >/dev/null 2>&1 || fail_msg "T-RACE: CONSUMED 2 must succeed — seqs {1,2} are gapless (no burned seq)"
     # No stale tmp left leaking either.
-    n_leak="$(find "$STATE_DIR" -maxdepth 1 -name '.wake.tmp.*' -type f | grep -c . || true)"
+    n_leak="$(find "$STATE_DIR" -maxdepth 1 -name '.wake.tmp.*' -type f | count_lines . || true)"
     [ "$n_leak" = "0" ] || fail_msg "T-RACE: $n_leak stale tmp file(s) leaked after both enqueues committed"
   fi
 ) && ok
 
 echo
 if [ -s "$FAILFILE" ]; then
-  echo "wake store enqueue-race harness: FAILED ($(grep -c . "$FAILFILE") assertion(s)) — #927 TOCTOU reproduced (RED)" >&2
+  echo "wake store enqueue-race harness: FAILED ($(count_lines . "$FAILFILE") assertion(s)) — #927 TOCTOU reproduced (RED)" >&2
   exit 1
 fi
 echo "wake store enqueue-race harness: all invariants passed ($pass group) — #927 race closed (GREEN)"

packages/mosaic/framework/tools/wake/validate-973/check-973.py

@@ -0,0 +1,318 @@
+#!/usr/bin/env python3
+"""check-973.py — computation backend for the #973 validation harness.
+
+Everything here derives from exactly two inputs: the frozen denominator
+artifact (denominator-089615f.json) and the SOURCE TEXT of the ten converted
+suites at the current tree. It never reads the ledger — set arithmetic against
+the runtime trace belongs to validate-973.sh, so the two legs of the
+comparison come from independent code paths.
+
+Subcommands (all print sorted, stable output; non-zero exit on any failure):
+
+  expected   The expected coordinate set from the ARTIFACT: one
+             "<helper> <file>:<line+7>" row per denominator row (+7 = 3
+             converter header lines + 4 lines from the #984 source guard,
+             uniform across all ten suites).
+             Multi-grep lines stay ONE coordinate.
+
+  static     The converted-site inventory from the SOURCE TEXT at the current
+             tree: every non-comment line bearing a has_match/count_lines
+             token, as "<helper> <file>:<line>". Independent of the artifact
+             row list, so `expected == static` is a real check on the
+             conversion, not a tautology. (Amendment ONE, leg 1: the ledger is
+             an execution trace, not an inventory — the inventory must come
+             from the text.)
+
+  arms       The forced-error arm list: the 19 denominator canaries plus one
+             E-form arm (store-ack:733→740, a $(count_lines) capture compared
+             afterward — the A6 shape) plus one F-form arm (quarantine:560→567,
+             the multi-grep pipeline capture), as "<helper> <file>:<line+7>
+             <form>". Both extras are asserted to exist in the artifact with
+             the expected form — a renumber that moved them fails here, not
+             silently downstream.
+
+  sweep      Residual sweep: the denominator's own classifier (ported from the
+             frozen derivation) over the ten suites at the current tree must
+             find ZERO unconverted verdict-form grep sites; and, IN THE SAME
+             RUN, eight specimens (six per-form + two absorb-branch probes, #985)
+             planted into a temp copy of a real
+             suite must ALL be found with their correct forms — an instrument
+             that reports zero must first be seen finding what it claims to
+             find (A5).
+"""
+
+import json
+import re
+import shutil
+import sys
+import tempfile
+from pathlib import Path
+
+HERE = Path(__file__).resolve().parent
+WAKE = HERE.parent
+ART = HERE / "denominator-089615f.json"
+
+HEADER_SHIFT = 7  # 3 converter header lines after SCRIPT_DIR + 4 lines from the
+# #984 source guard (1-line `. _wake-common.sh && wake_assert_init` became a 5-line
+# guarded block) — both uniform across all ten suites, both above every site.
+
+# The two hand-picked extra arms (base coordinates; forms asserted at load).
+EXTRA_ARMS = [
+    ("test-wake-store-ack.sh", 733, "E-count-capture"),
+    ("test-wake-digest-quarantine.sh", 560, "F-extract-capture"),
+]
+
+RX_HELPER = re.compile(r"(^|[^A-Za-z0-9_.-])(has_match|count_lines)([^A-Za-z0-9_.-]|$)")
+
+# ---- classifier, ported verbatim in logic from the frozen denominator
+# ---- derivation (docs/journal/fleet/drift-derive-089615f__pepper.py)
+RX_FAIL_SAME = re.compile(r"(\|\||&&)\s*fail")
+RX_COUNT_SUB = re.compile(r"\$\(.*grep\s+[^)]*-c|\$\(\s*grep\s+-c")
+RX_ASSIGN_SUB = re.compile(r'=\s*"?\$\(.*grep')
+RX_IF = re.compile(r"^\s*(el)?if\s+.*grep")
+RX_GREP = re.compile(r"(^|[^A-Za-z0-9_.-])grep([^A-Za-z0-9_.-]|$)")
+
+# grep in COMMAND position: at line start or after a command separator / subshell
+# opener / shell keyword / `!`. Quote-unaware by design — a quoted "grep" after a
+# separator reads as a command and lands the line in residual, which fails LOUD;
+# the absorb direction (note) is the one that must never fire on a real verdict.
+RX_GREP_CMD = re.compile(
+    r"(?:^|[;|&(`]|\$\(|\bif\b|\belif\b|\bthen\b|\belse\b|\bdo\b|\bwhile\b|\buntil\b|!)"
+    r"\s*grep(?:\s|$)"
+)
+
+
+def classify(lines):
+    """Return (sites, dispo). Every line containing the word grep gets a row."""
+    sites, dispo = [], []
+    n = len(lines)
+    for i, raw in enumerate(lines):
+        line = raw
+        ln = i + 1
+        if not RX_GREP.search(line):
+            continue
+        stripped = line.strip()
+        if stripped.startswith("#"):
+            dispo.append((ln, "comment", stripped))
+            continue
+        nxt = ""
+        for j in range(i + 1, min(i + 3, n)):
+            if lines[j].strip():
+                nxt = lines[j].strip()
+                break
+        if "$(" in line and RX_COUNT_SUB.search(line):
+            sites.append((ln, "E-count-capture", stripped))
+            continue
+        if RX_ASSIGN_SUB.search(line) and "grep -c" not in line:
+            sites.append((ln, "F-extract-capture", stripped))
+            continue
+        if RX_FAIL_SAME.search(line):
+            sites.append((ln, "A-same-line", stripped))
+            continue
+        if stripped.endswith("\\"):
+            k = i + 1
+            joined = stripped[:-1]
+            while k < n:
+                cont = lines[k].strip()
+                joined += " " + (cont[:-1] if cont.endswith("\\") else cont)
+                if not cont.endswith("\\"):
+                    break
+                k += 1
+            if re.search(r"(\|\||&&)\s*fail", joined) or (
+                joined.rstrip().endswith(("||", "&&"))
+                and k + 1 < n
+                and lines[k + 1].strip().startswith("fail")
+            ):
+                sites.append((ln, "C-cont-backslash", stripped))
+                continue
+            dispo.append((ln, "backslash-no-fail-continuation", stripped))
+            continue
+        if stripped.endswith(("||", "&&")) and nxt.startswith("fail"):
+            sites.append((ln, "B-cont-operator", stripped))
+            continue
+        if RX_IF.search(line):
+            window = " ".join(lines[j] for j in range(i, min(i + 5, n)))
+            if "fail" in window:
+                sites.append((ln, "D-if-form", stripped))
+                continue
+            dispo.append((ln, "if-grep-no-fail-window", stripped))
+            continue
+        win = " ".join(lines[j] for j in range(max(0, i - 2), min(i + 3, n)))
+        if re.search(r"fail", win, re.I):
+            dispo.append((ln, "BACKSTOP-HAND-REVIEW", stripped))
+        else:
+            dispo.append((ln, "no-verdict-context", stripped))
+    return sites, dispo
+
+
+def residual_sites(lines):
+    """classify() plus the absorb decision — the ONE path both sweep legs share.
+
+    A classified site is absorbed as a note only when its line carries a wake
+    helper token AND the line shows no grep in command position: a converted
+    line whose PATTERN argument merely contains the word grep. A helper line
+    that also runs a real grep verdict (has_match ... && grep -q SECRET ... &&
+    fail) stays residual (#985). Multi-line forms anchor the site at the line
+    containing grep, so a command-position grep on a continuation line never
+    shares its line with the helper token and stays residual by construction.
+    """
+    sites, dispo = classify(lines)
+    residual, notes = [], []
+    for ln, form, text in sites:
+        line = lines[ln - 1]
+        if RX_HELPER.search(line) and not RX_GREP_CMD.search(line):
+            notes.append((ln, form, text))
+        else:
+            residual.append((ln, form, text))
+    return residual, notes, dispo
+
+
+def load_art():
+    art = json.loads(ART.read_text())
+    assert art["total"] == 261 == len(art["rows"]), "artifact self-consistency"
+    return art
+
+
+def helper_for(row):
+    return "count_lines" if row["form"].startswith("E") else "has_match"
+
+
+def suite_files(art):
+    return sorted({r["file"] for r in art["rows"]})
+
+
+def cmd_expected():
+    art = load_art()
+    out = sorted(
+        f"{helper_for(r)} {r['file']}:{r['line'] + HEADER_SHIFT}" for r in art["rows"]
+    )
+    assert len(out) == len(set(out)) == 261, "expected set must be 261 distinct rows"
+    print("\n".join(out))
+    return 0
+
+
+def cmd_static():
+    art = load_art()
+    rows = []
+    for f in suite_files(art):
+        for i, line in enumerate((WAKE / f).read_text().split("\n"), start=1):
+            if line.strip().startswith("#"):
+                continue
+            m = RX_HELPER.search(line)
+            if not m:
+                continue
+            helper = (
+                "count_lines"
+                if RX_HELPER.search(line).group(2) == "count_lines"
+                else "has_match"
+            )
+            rows.append(f"{helper} {f}:{i}")
+    print("\n".join(sorted(rows)))
+    return 0
+
+
+def cmd_arms():
+    art = load_art()
+    by_key = {(r["file"], r["line"]): r for r in art["rows"]}
+    rows = []
+    canaries = [r for r in art["rows"] if r.get("canary")]
+    assert len(canaries) == 19, f"expected 19 canaries, artifact has {len(canaries)}"
+    for r in canaries:
+        rows.append(f"{helper_for(r)} {r['file']}:{r['line'] + HEADER_SHIFT} {r['form']}")
+    for f, ln, want_form in EXTRA_ARMS:
+        r = by_key.get((f, ln))
+        assert r is not None, f"extra arm {f}:{ln} not in artifact — renumbered?"
+        assert r["form"] == want_form, f"extra arm {f}:{ln} form {r['form']} != {want_form}"
+        rows.append(f"{helper_for(r)} {f}:{ln + HEADER_SHIFT} {r['form']}")
+    assert len(rows) == 21
+    print("\n".join(rows))
+    return 0
+
+
+# (expected classify form, expected disposition through residual_sites, snippet)
+PLANTS = [
+    ("A-same-line", "residual", ['grep -q needle haystack || fail "plant-A"']),
+    ("B-cont-operator", "residual", ["grep -q needle haystack ||", '  fail "plant-B"']),
+    ("C-cont-backslash", "residual", ["grep -q needle \\", '  haystack || fail "plant-C"']),
+    ("D-if-form", "residual", ["if ! grep -q needle haystack; then", '  fail "plant-D"', "fi"]),
+    ("E-count-capture", "residual", ['[ "$(grep -c needle haystack)" = "1" ] || fail "plant-E"']),
+    ("F-extract-capture", "residual", ['val="$(grep needle haystack)"']),
+    # G: a converted line that ALSO runs a raw grep verdict — the helper token
+    # must not absorb it (#985)
+    ("A-same-line", "residual", ['has_match -q needle "$F" && grep -q SECRET "$F" && fail "plant-G"']),
+    # H: negative control — helper whose PATTERN argument is the word grep;
+    # must be absorbed as a note, never residual
+    ("A-same-line", "note", ['has_match -q "grep" haystack || fail "plant-H"']),
+]
+
+
+def cmd_sweep():
+    art = load_art()
+    bad = 0
+
+    # leg 1: real suites at the current tree must be residual-free
+    for f in suite_files(art):
+        residual, notes, _dispo = residual_sites((WAKE / f).read_text().split("\n"))
+        for ln, form, text in notes:
+            # converted line whose PATTERN argument contains the word grep:
+            # not an unconverted site, but never silently absorbed either
+            print(f"SWEEP-NOTE {f}:{ln} converted line matches grep-token ({form}): {text[:80]}")
+        for ln, form, text in residual:
+            print(f"SWEEP-RESIDUAL {f}:{ln} {form}: {text[:100]}")
+            bad += 1
+        print(f"SWEEP {f}: {len(residual)} residual verdict site(s)")
+
+    # leg 2, SAME RUN, SAME PATH as leg 1: the instrument must find every plant
+    # with the right form AND the right absorb disposition — plants G/H exercise
+    # the absorb branch itself, so this leg must go through residual_sites(),
+    # not raw classify()
+    donor = suite_files(art)[0]
+    with tempfile.TemporaryDirectory() as td:
+        planted = Path(td) / donor
+        shutil.copy(WAKE / donor, planted)
+        base_lines = planted.read_text().split("\n")
+        offset = len(base_lines)
+        expect = {}
+        for form, dispo, snippet in PLANTS:
+            expect[offset + 1] = (form, dispo)  # first physical line of each plant
+            base_lines.extend(snippet)
+            offset = len(base_lines)
+        planted.write_text("\n".join(base_lines))
+        residual, notes, _ = residual_sites(planted.read_text().split("\n"))
+        found = {ln: (form, "residual") for ln, form, _t in residual}
+        found.update({ln: (form, "note") for ln, form, _t in notes})
+        unexpected = [(ln, form) for ln, form, _t in residual if ln not in expect]
+        hits = sum(1 for ln, want in expect.items() if found.get(ln) == want)
+        n_plants = len(PLANTS)
+        print(f"SWEEP-PLANTS found={hits}/{n_plants} in planted copy of {donor}")
+        if hits != n_plants:
+            for ln, want in sorted(expect.items()):
+                got = found.get(ln, ("<missed>", "<missed>"))
+                if got != want:
+                    print(f"SWEEP-PLANT-MISS line {ln}: expected {want}, got {got}")
+            bad += 1
+        if unexpected:
+            # the donor is a converted suite: any non-plant RESIDUAL site in the
+            # copy contradicts the zero leg 1 just reported on the original
+            # (non-plant notes mirror leg 1's treatment: printed there, not bad)
+            for ln, form in unexpected:
+                print(f"SWEEP-PLANT-UNEXPECTED {donor}(copy):{ln} {form}")
+            bad += 1
+
+    return 1 if bad else 0
+
+
+def main():
+    cmds = {
+        "expected": cmd_expected,
+        "static": cmd_static,
+        "arms": cmd_arms,
+        "sweep": cmd_sweep,
+    }
+    if len(sys.argv) != 2 or sys.argv[1] not in cmds:
+        sys.exit(f"usage: check-973.py {{{'|'.join(cmds)}}}")
+    sys.exit(cmds[sys.argv[1]]())
+
+
+if __name__ == "__main__":
+    main()

packages/mosaic/framework/tools/wake/validate-973/convert-973.py

@@ -0,0 +1,131 @@
+#!/usr/bin/env python3
+"""convert-973.py — mechanical #973 site conversion, driven by the frozen
+denominator artifact (denominator-089615f.json), never by ad-hoc grepping.
+
+For every row in the artifact it FIRST verifies the worktree line still says
+what the artifact froze (exact match after whitespace strip, artifact-side
+truncation as prefix match, or the normalized suite-summary template), and
+aborts before touching anything on the first verification failure — a
+conversion applied to a line the denominator did not measure would be the
+umbrella defect wearing the converter's clothes.
+
+Transforms (behaviour-preserving; verdict semantics unchanged on grep rc 0/1):
+  E-count-capture   `grep -c ARGS`  -> `count_lines ARGS`  (helper adds -c)
+  all other forms   `grep ARGS`     -> `has_match ARGS`    (drop-in)
+  env prefixes (`LC_ALL=C grep`) are kept — the prefix reaches the grep child
+  through the function (microtest C8).
+
+The two multi-grep pipeline sites (digest-quarantine:560, install:420) convert
+BOTH greps: each is measurement-bearing, and under pipefail an rc=2 in the
+left element is masked by an rc=1 in the right — the same defect one pipe
+deeper. They stay ONE denominator site each (one coordinate); the ledger
+records helper calls, so those coordinates appear twice per execution and the
+equality check compares SETS of coordinates.
+
+Finally each suite gains three header lines directly after its SCRIPT_DIR
+assignment (source + wake_assert_init + comment), shifting every site by +3
+lines exactly; the validation harness maps base coordinates accordingly.
+"""
+
+import json
+import re
+import sys
+from pathlib import Path
+
+HERE = Path(__file__).resolve().parent
+WAKE = HERE.parent
+ART = HERE / "denominator-089615f.json"
+
+RX_GREP_TOKEN = re.compile(r"(^|[^A-Za-z0-9_.-])grep([^A-Za-z0-9_.-]|$)")
+
+HEADER = [
+    "# #973: three-valued grep assertion helpers (has_match/count_lines); init saves real stderr for abort loudness.\n",
+    "# shellcheck disable=SC1091\n",
+    '. "$SCRIPT_DIR/_wake-common.sh" && wake_assert_init\n',
+]
+
+MULTI_GREP_CONVERT_BOTH = {
+    ("test-wake-digest-quarantine.sh", 560),
+    ("test-wake-install.sh", 420),
+}
+
+SUMMARY_TEMPLATE_MARK = '$(grep -c . "$FAILFILE")'
+
+
+def verify(row, actual):
+    a = actual.strip()
+    t = row["text"].strip()
+    if a == t:
+        return True
+    if t and a.startswith(t):  # artifact-side truncation
+        return True
+    # normalized suite-summary template rows
+    if t.startswith('echo "wake ') and SUMMARY_TEMPLATE_MARK in actual and a.startswith('echo "wake '):
+        return True
+    return False
+
+
+def convert_line(row, line):
+    key = (row["file"], row["line"])
+    n_grep = len(RX_GREP_TOKEN.findall(line))
+    if key in MULTI_GREP_CONVERT_BOTH:
+        assert n_grep == 2, f"{key}: expected 2 grep tokens, found {n_grep}"
+    else:
+        assert n_grep == 1, f"{key}: expected 1 grep token, found {n_grep}: {line!r}"
+
+    if row["form"].startswith("E"):
+        assert line.count("grep -c ") == 1, f"{key}: E row without single 'grep -c ': {line!r}"
+        return line.replace("grep -c ", "count_lines ", 1)
+
+    def repl(m):
+        return m.group(1) + "has_match" + m.group(2)
+
+    count = 2 if key in MULTI_GREP_CONVERT_BOTH else 1
+    return RX_GREP_TOKEN.sub(repl, line, count=count)
+
+
+def main():
+    art = json.loads(ART.read_text())
+    rows = art["rows"]
+    by_file = {}
+    for r in rows:
+        by_file.setdefault(r["file"], []).append(r)
+
+    # pass 1: verify every row before touching any file
+    bad = 0
+    texts = {}
+    for f, frs in by_file.items():
+        lines = (WAKE / f).read_text().split("\n")
+        texts[f] = lines
+        for r in frs:
+            if not verify(r, lines[r["line"] - 1]):
+                bad += 1
+                print(f"VERIFY-FAIL {f}:{r['line']}\n  artifact: {r['text']!r}\n  worktree: {lines[r['line'] - 1]!r}")
+    if bad:
+        sys.exit(f"ABORT: {bad} row(s) failed verification; nothing was modified.")
+
+    # pass 2: convert + insert header
+    total = {"has_match": 0, "count_lines": 0}
+    for f, frs in sorted(by_file.items()):
+        lines = texts[f]
+        for r in frs:
+            i = r["line"] - 1
+            new = convert_line(r, lines[i])
+            assert new != lines[i], f"{f}:{r['line']}: no-op conversion"
+            lines[i] = new
+            total["count_lines" if r["form"].startswith("E") else "has_match"] += 1
+        # header insertion after the SCRIPT_DIR= line
+        sd = [i for i, ln in enumerate(lines) if ln.startswith('SCRIPT_DIR="$(')]
+        assert len(sd) == 1, f"{f}: expected exactly one SCRIPT_DIR line, found {len(sd)}"
+        first_site = min(r["line"] for r in frs) - 1
+        assert sd[0] < first_site, f"{f}: SCRIPT_DIR line {sd[0] + 1} not before first site {first_site + 1}"
+        lines[sd[0] + 1 : sd[0] + 1] = [h.rstrip("\n") for h in HEADER]
+        (WAKE / f).write_text("\n".join(lines))
+        print(f"{f}: {len(frs)} sites converted, header at line {sd[0] + 2}")
+
+    print(f"TOTAL: {total['has_match']} has_match + {total['count_lines']} count_lines = {sum(total.values())} sites in {len(by_file)} files")
+    assert sum(total.values()) == art["total"] == 261, "site count mismatch vs artifact"
+
+
+if __name__ == "__main__":
+    main()

packages/mosaic/framework/tools/wake/validate-973/microtest-wake-assert.sh

@@ -0,0 +1,299 @@
+#!/usr/bin/env bash
+# microtest-wake-assert.sh — #973 instrument self-test. Run BEFORE trusting any
+# validate-run evidence: it proves the counted ledger and the abort mechanics on
+# two generated mini-suites, so a defect in the instrument cannot silently wear
+# the colour of a clean validation.
+#
+# What it proves (each check named C1..C8 below):
+#   C1  green run: ledger set EQUALS a text-derived expected set spanning TWO
+#       files (file-field discrimination), row count > 1, both sentinels emitted,
+#       exit 0. Also pins the BASH_LINENO convention for backslash-continuation
+#       call sites against the first-physical-line convention the denominator
+#       artifact uses.
+#   C2  early-exit truncation: a suite that exits before its later site yields a
+#       SHORT ledger, and the expected-set comparison catches it — a counted
+#       ledger must report its own truncation, never a smaller total.
+#   C3  abort from inside a `( ... )` test subshell kills the WHOLE suite: no
+#       sentinel, non-zero exit, loud named reason (file:line + raw rc).
+#   C4  abort stays loud at a call site that appends 2>/dev/null (the preimage
+#       canary shape) — the saved-fd path.
+#   C5  abort escapes a `$( count_lines ... )` substitution (A6 shape): the
+#       count from a failed measurement is never compared and the suite dies.
+#   C6  abort escapes a pipeline tail (`printf | has_match`).
+#   C7  count_lines prints 0 on grep rc 1 (zero matches is a measurement, not an
+#       error) — implicit in C1's green run via the delta-count site.
+#   C8  an env-prefix on the helper (`LC_ALL=C has_match ...`) reaches the grep
+#       child — pins the conversion shape for the digest-hmac LC_ALL site.
+#   C9  an arm that matches NO site is loud about it by omission: green run,
+#       sentinel present, and NO "WAKE-ASSERT ARMED" line — so "did not abort"
+#       is separable into arm-never-matched (no ARMED line) vs error-path-
+#       broken (ARMED line, no abort). C3..C6 require the ARMED line AND the
+#       aborting site's ledger row (append lands BEFORE the grep runs, so an
+#       abort can never shorten the count it is part of).
+#   C10 the BASH_LINENO pin's abort arm fires: under a probe interpreter that
+#       misreports the continuation line, wake_assert_init aborts loudly and
+#       nothing past init executes — a pin whose failure arm was never seen
+#       firing is an undertaking, not a control.
+#   C11 the FAILED-summary template executes on the red path: a mini-suite
+#       driven deterministically red emits the exact converted summary shape
+#       (`FAILED ($(count_lines . "$FAILFILE") assertion(s))`) with the right
+#       count, exits 1, and the summary site's ledger row lands. The nine
+#       real-suite summary sites are structurally unreachable in a green run
+#       (guarded by [ -s "$FAILFILE" ]); their dispositions cite THIS check as
+#       the measured execution of the same template, so "unexecuted in the
+#       green run" never silently means "never executed anywhere".
+set -uo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+export WAKE_COMMON="$HERE/../_wake-common.sh"
+[ -f "$WAKE_COMMON" ] || {
+  echo "microtest: _wake-common.sh not found at $WAKE_COMMON" >&2
+  exit 1
+}
+
+TMP="$(mktemp -d)"
+trap 'rm -rf "$TMP"' EXIT
+
+fails=0
+check() { # check NAME COND-DESCRIPTION (pass/fail already decided by caller: $1=name $2=0|1 $3=detail)
+  if [ "$2" -eq 0 ]; then
+    echo "  PASS $1"
+  else
+    echo "  FAIL $1 — $3"
+    fails=$((fails + 1))
+  fi
+}
+
+# --- fixture data ----------------------------------------------------------
+printf 'alpha\nbeta\nbeta\ngamma-unused\n' >"$TMP/data.txt"
+
+# --- mini-suite A: six helper sites across every converted form ------------
+cat >"$TMP/mini-a.sh" <<'MINI_A'
+#!/usr/bin/env bash
+set -uo pipefail
+. "$WAKE_COMMON"
+wake_assert_init
+TMP="$1"
+FAILFILE="$TMP/failures-a"
+: >"$FAILFILE"
+fail_msg() { echo "  FAIL: $*" >&2; echo x >>"$FAILFILE"; }
+ok() { :; }
+(
+  has_match -q alpha "$TMP/data.txt" || fail_msg "alpha missing" # SITE:or-subshell
+) && ok
+(
+  has_match -q FORBIDDEN "$TMP/data.txt" 2>/dev/null && fail_msg "forbidden present" # SITE:and-swallow
+) && ok
+(
+  [ "$(count_lines beta "$TMP/data.txt")" = "2" ] || fail_msg "beta count" # SITE:count-capture
+) && ok
+(
+  printf 'gamma\n' | has_match -q gamma || fail_msg "gamma pipeline" # SITE:pipeline
+) && ok
+(
+  has_match -q \
+    alpha "$TMP/data.txt" || fail_msg "continuation" # SITE:continuation
+) && ok
+(
+  [ "$(count_lines delta "$TMP/data.txt")" = "0" ] || fail_msg "delta zero" # SITE:count-zero
+) && ok
+if [ -s "$FAILFILE" ]; then
+  echo "mini-a: FAILED" >&2
+  exit 1
+fi
+echo "mini-a: OK" >&2
+MINI_A
+
+# --- mini-suite B: second file, one site behind an early exit --------------
+cat >"$TMP/mini-b.sh" <<'MINI_B'
+#!/usr/bin/env bash
+set -uo pipefail
+. "$WAKE_COMMON"
+wake_assert_init
+TMP="$1"
+(
+  has_match -q alpha "$TMP/data.txt" || echo "b1 missing" >&2 # SITE:b-first
+)
+if [ "${MINI_B_EARLY_EXIT:-}" = "1" ]; then
+  exit 0
+fi
+(
+  has_match -q beta "$TMP/data.txt" || echo "b2 missing" >&2 # SITE:b-second
+)
+echo "mini-b: OK" >&2
+MINI_B
+chmod +x "$TMP/mini-a.sh" "$TMP/mini-b.sh"
+
+# Text-derived expected set: helper-name + basename:line for every SITE-marked
+# call, taken from the generated files' TEXT (independent of BASH_LINENO), with
+# the continuation site expected at its FIRST physical line — the denominator
+# artifact's convention.
+expected_set() { # expected_set FILE
+  local f="$1" base
+  base="$(basename "$f")"
+  awk '
+    /# SITE:/ {
+      line = NR
+      if ($0 !~ /has_match|count_lines/) line = NR - 1  # marker on the continuation tail
+      print line
+    }
+  ' "$f" | while read -r ln; do
+    txt="$(sed -n "${ln}p" "$f")"
+    case "$txt" in
+    *count_lines*) printf 'count_lines %s:%s\n' "$base" "$ln" ;;
+    *) printf 'has_match %s:%s\n' "$base" "$ln" ;;
+    esac
+  done
+}
+
+site_line() { # site_line FILE MARKER -> first physical line of that call
+  local f="$1" marker="$2" ln
+  ln="$(grep -n "# SITE:${marker}\$" "$f" | cut -d: -f1)"
+  # continuation marker sits on the tail line; the call starts one line up
+  if ! sed -n "${ln}p" "$f" | grep -Eq 'has_match|count_lines'; then
+    ln=$((ln - 1))
+  fi
+  printf '%s' "$ln"
+}
+
+# --- C1: green run, two files, set equality --------------------------------
+LEDGER="$TMP/ledger-c1"
+: >"$LEDGER"
+outA="$(WAKE_ASSERT_LEDGER="$LEDGER" bash "$TMP/mini-a.sh" "$TMP" 2>&1)"
+rcA=$?
+outB="$(WAKE_ASSERT_LEDGER="$LEDGER" bash "$TMP/mini-b.sh" "$TMP" 2>&1)"
+rcB=$?
+{ expected_set "$TMP/mini-a.sh"; expected_set "$TMP/mini-b.sh"; } | sort >"$TMP/expected-c1"
+sort "$LEDGER" >"$TMP/got-c1"
+n_expected="$(grep -c . "$TMP/expected-c1")"
+if [ "$rcA" -eq 0 ] && [ "$rcB" -eq 0 ] &&
+  printf '%s' "$outA" | grep -q 'mini-a: OK' &&
+  printf '%s' "$outB" | grep -q 'mini-b: OK' &&
+  [ "$n_expected" -gt 1 ] &&
+  cmp -s "$TMP/expected-c1" "$TMP/got-c1"; then
+  check C1 0 ""
+else
+  check C1 1 "rcA=$rcA rcB=$rcB expected($n_expected)/got diff: $(diff "$TMP/expected-c1" "$TMP/got-c1" 2>&1 | head -n 10 | tr '\n' ' ')"
+fi
+
+# --- C2: early exit -> short ledger, comparison catches it -----------------
+LEDGER="$TMP/ledger-c2"
+: >"$LEDGER"
+WAKE_ASSERT_LEDGER="$LEDGER" MINI_B_EARLY_EXIT=1 bash "$TMP/mini-b.sh" "$TMP" >/dev/null 2>&1
+expected_set "$TMP/mini-b.sh" | sort >"$TMP/expected-c2"
+sort "$LEDGER" >"$TMP/got-c2"
+if ! cmp -s "$TMP/expected-c2" "$TMP/got-c2" &&
+  grep -q "has_match mini-b.sh:$(site_line "$TMP/mini-b.sh" b-first)" "$TMP/got-c2" &&
+  ! grep -q "mini-b.sh:$(site_line "$TMP/mini-b.sh" b-second)" "$TMP/got-c2"; then
+  check C2 0 ""
+else
+  check C2 1 "truncated ledger was not detected as short"
+fi
+
+# --- C3..C6: per-shape abort proofs ----------------------------------------
+abort_case() { # abort_case NAME MARKER HELPER
+  local name="$1" marker="$2" helper="$3" ln site out rc ledger
+  ln="$(site_line "$TMP/mini-a.sh" "$marker")"
+  site="mini-a.sh:${ln}"
+  ledger="$TMP/ledger-${name}"
+  : >"$ledger"
+  out="$(WAKE_ASSERT_LEDGER="$ledger" WAKE_ASSERT_FORCE_GREP_ERROR_AT="$site" \
+    bash "$TMP/mini-a.sh" "$TMP" 2>&1)"
+  rc=$?
+  if [ "$rc" -ne 0 ] &&
+    ! printf '%s' "$out" | grep -q 'mini-a: OK' &&
+    ! printf '%s' "$out" | grep -q 'mini-a: FAILED' &&
+    printf '%s' "$out" | grep -q "WAKE-ASSERT ARMED: forcing real grep error at $site" &&
+    printf '%s' "$out" | grep -q "WAKE-ASSERT ABORT" &&
+    printf '%s' "$out" | grep -q "$site" &&
+    printf '%s' "$out" | grep -q "grep exit 2" &&
+    grep -q "^${helper} ${site}\$" "$ledger"; then
+    check "$name" 0 ""
+  else
+    check "$name" 1 "rc=$rc site=$site ledger=$(grep -c . "$ledger") out=$(printf '%s' "$out" | tail -n 3 | tr '\n' ' ')"
+  fi
+}
+abort_case C3 or-subshell has_match
+abort_case C4 and-swallow has_match
+abort_case C5 count-capture count_lines
+abort_case C6 pipeline has_match
+
+# --- C7: covered by C1 (delta-count site prints 0 on grep rc 1) ------------
+check C7 0 ""
+
+# --- C8: env-prefix on a function reaches the grep child -------------------
+envprobe() { command env | command grep -c '^LC_ALL=xx_wake_test$'; }
+got="$(LC_ALL=xx_wake_test envprobe 2>/dev/null)" # bash's setlocale warning about the fake locale is itself proof the prefix landed
+if [ "$got" = "1" ]; then check C8 0 ""; else check C8 1 "env-prefix did not reach child (got=$got)"; fi
+
+# --- C9: arm matching NO site -> green run, no ARMED line ------------------
+out="$(WAKE_ASSERT_FORCE_GREP_ERROR_AT="mini-a.sh:9999" bash "$TMP/mini-a.sh" "$TMP" 2>&1)"
+rc=$?
+if [ "$rc" -eq 0 ] &&
+  printf '%s' "$out" | grep -q 'mini-a: OK' &&
+  ! printf '%s' "$out" | grep -q 'WAKE-ASSERT ARMED'; then
+  check C9 0 ""
+else
+  check C9 1 "rc=$rc out=$(printf '%s' "$out" | tail -n 3 | tr '\n' ' ')"
+fi
+
+# --- C10: lineno pin aborts under an interpreter that breaks the convention -
+cat >"$TMP/fake-bash" <<'FAKE'
+#!/usr/bin/env bash
+# stand-in for a bash whose BASH_LINENO convention differs: misreports the
+# continuation call one line low (the exact skew the pin exists to catch)
+printf '3\n5\n'
+FAKE
+chmod +x "$TMP/fake-bash"
+out="$(WAKE_ASSERT_PIN_BASH="$TMP/fake-bash" bash -c '. "$WAKE_COMMON" && wake_assert_init && echo REACHED-PAST-INIT' 2>&1)"
+rc=$?
+if [ "$rc" -ne 0 ] &&
+  ! printf '%s' "$out" | grep -q 'REACHED-PAST-INIT' &&
+  printf '%s' "$out" | grep -q 'WAKE-ASSERT INIT ABORT: BASH_LINENO convention violated'; then
+  check C10 0 ""
+else
+  check C10 1 "rc=$rc out=$(printf '%s' "$out" | tail -n 2 | tr '\n' ' ')"
+fi
+
+# --- C11: red path executes the converted FAILED-summary template -----------
+cat >"$TMP/mini-c.sh" <<'MINI_C'
+#!/usr/bin/env bash
+set -uo pipefail
+. "$WAKE_COMMON"
+wake_assert_init
+TMP="$1"
+FAILFILE="$TMP/failures-c"
+: >"$FAILFILE"
+fail_msg() { echo "  FAIL: $*" >&2; echo x >>"$FAILFILE"; }
+ok() { :; }
+(
+  has_match -q alpha "$TMP/data.txt" && fail_msg "alpha present" # SITE:c-inverted (deterministically red: alpha IS in the fixture)
+) && ok
+echo
+if [ -s "$FAILFILE" ]; then
+  echo "wake mini-c harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2 # SITE:c-summary
+  exit 1
+fi
+echo "wake mini-c harness: all invariants passed (1 group)"
+MINI_C
+chmod +x "$TMP/mini-c.sh"
+LEDGER="$TMP/ledger-c11"
+: >"$LEDGER"
+out="$(WAKE_ASSERT_LEDGER="$LEDGER" bash "$TMP/mini-c.sh" "$TMP" 2>&1)"
+rc=$?
+summary_ln="$(site_line "$TMP/mini-c.sh" c-summary)"
+if [ "$rc" -eq 1 ] &&
+  printf '%s' "$out" | grep -q 'wake mini-c harness: FAILED (1 assertion(s))' &&
+  ! printf '%s' "$out" | grep -q 'all invariants passed' &&
+  grep -q "^count_lines mini-c.sh:${summary_ln}\$" "$LEDGER"; then
+  check C11 0 ""
+else
+  check C11 1 "rc=$rc summary_ln=$summary_ln ledger=$(tr '\n' ' ' <"$LEDGER") out=$(printf '%s' "$out" | tail -n 2 | tr '\n' ' ')"
+fi
+
+echo
+if [ "$fails" -gt 0 ]; then
+  echo "microtest-wake-assert: FAILED ($fails check(s))" >&2
+  exit 1
+fi
+echo "microtest-wake-assert: OK (all checks passed)"

packages/mosaic/framework/tools/wake/validate-973/unexecuted-sites-dispositions.txt

@@ -0,0 +1,37 @@
+# unexecuted-sites-dispositions.txt — #973 validation, amendment ONE leg 3.
+#
+# The ledger is an execution trace, not an inventory: a green instrumented run
+# cannot execute a site that only lives on a suite's red path. Every converted
+# site that did NOT appear in the green-run trace is enumerated here with an
+# individual disposition; validate-973.sh fails if any unexecuted site lacks a
+# row here, and ALSO fails if a row here names a site that DID execute (stale
+# disposition). Key = first two whitespace-separated fields; text after "—" is
+# the adjudication.
+#
+# All nine sites below are the same structural shape, adjudicated one by one
+# from source text: the suite's FAILED-branch summary line,
+#   echo "wake <name> harness: FAILED ($(count_lines . "$FAILFILE") assertion(s))" >&2
+# guarded by `if [ -s "$FAILFILE" ]` — structurally unreachable while every
+# assertion passes, which is precisely the state a green validation run is
+# required to be in. (The tenth suite, test-wake-preimage.sh, uses its own
+# X/Y summary format with no grep in the red branch, so it has no row here.)
+#
+# The disposition is NOT "it would work": the exact template is EXECUTED red
+# in microtest C11 (deterministically failed mini-suite, same
+# count_lines-in-substitution summary shape → right count, exit 1, ledger row
+# at the summary coordinate), and the E-in-substitution abort path is proven
+# by microtest C5 plus the forced-error arm at test-wake-store-ack.sh:736.
+# Each site's conversion text is independently verified by the static
+# inventory (check-973.py static == expected, all 261 rows).
+#
+# Verified guard per site (line numbers at branch tip, +3 header shift):
+
+count_lines test-wake-beacon.sh:354 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 353; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-detector.sh:706 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 705; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-digest-hmac.sh:438 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 437; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-digest-quarantine.sh:588 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 587; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-fn-oracle.sh:136 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 135; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-install.sh:438 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 437; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-reconcile.sh:393 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 392; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-store-ack.sh:745 — red-path summary; guard `[ -s "$FAILFILE" ]` at line 744; template execution measured by microtest C11; text verified by static inventory
+count_lines test-wake-store-enqueue-race.sh:212 — red-path summary (with "#927 TOCTOU reproduced (RED)" tail); guard `[ -s "$FAILFILE" ]` at line 211; template execution measured by microtest C11; text verified by static inventory

packages/mosaic/framework/tools/wake/validate-973/validate-973.sh

@@ -0,0 +1,218 @@
+#!/usr/bin/env bash
+# validate-973.sh — #973 validation driver. One run produces the complete
+# evidence chain for the 261-site conversion:
+#
+#   0. instrument self-test (microtest) — no validate evidence is trusted
+#      before the instrument itself has been proven, including its abort arms.
+#   1. expected set: 261 coordinates from the FROZEN artifact (+7 header
+#      shift: 3 converter lines + 4 #984 guard lines), count asserted against the number declared below BEFORE any
+#      suite runs.
+#   2. static inventory: converted call sites re-derived from SOURCE TEXT,
+#      must equal the expected set exactly (amendment ONE, leg 1 — the
+#      inventory comes from the text, never from the ledger).
+#   3. green instrumented run: all ten suites with WAKE_ASSERT_LEDGER; each
+#      must exit 0 AND emit its own sentinel (per-suite formats differ and are
+#      pinned here — a suite that died early must never pass on another
+#      suite's output).
+#   4. trace arithmetic on coordinate SETS (loops re-execute sites and the
+#      multi-grep lines append twice per pass, so counts are meaningless;
+#      sets are not):
+#        trace − expected  MUST be empty (a helper ran at a coordinate the
+#                          denominator never measured);
+#        expected − trace  = converted-but-never-executed: enumerated, and
+#                          every entry must carry a disposition in the
+#                          committed unexecuted-sites-dispositions.txt, with
+#                          no stale dispositions the other way (amendment
+#                          ONE, legs 2+3 — the ledger is an execution trace,
+#                          not an inventory; the difference is enumerated and
+#                          individually dispositioned, never silently absent).
+#   5. forced-error arms: the 19 denominator canaries plus one E-form and one
+#      F-form site, each run with WAKE_ASSERT_FORCE_GREP_ERROR_AT: the suite
+#      must emit the ARMED line (the arm proved it fired), the ABORT line
+#      naming the site, exit non-zero, emit NO sentinel, and the aborting
+#      site's ledger row must already be present (the append lands before the
+#      grep).
+#   6. residual sweep: the denominator's own classifier finds zero unconverted
+#      verdict greps in the suites — and eight plants (six per-form + two
+#      absorb-branch probes, #985) in the same run.
+#
+# Output discipline (A10): every line that reports on a suite names the file
+# under test; exit codes are reported before failure counts.
+set -uo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+WAKE="$(cd "$HERE/.." && pwd)"
+CHECK="$HERE/check-973.py"
+DISPO="$HERE/unexecuted-sites-dispositions.txt"
+TMP="$(mktemp -d)"
+trap 'rm -rf "$TMP"' EXIT
+
+# Declared BEFORE any suite runs (A2): the run must produce THESE numbers,
+# not be described by whatever numbers it produced.
+EXPECTED_SUITES=10
+EXPECTED_SITES=261
+EXPECTED_ARMS=21
+
+fails=0
+flag() {
+  printf 'FAIL %s\n' "$*"
+  fails=$((fails + 1))
+}
+
+SUITES=(
+  test-wake-beacon.sh
+  test-wake-detector.sh
+  test-wake-digest-hmac.sh
+  test-wake-digest-quarantine.sh
+  test-wake-fn-oracle.sh
+  test-wake-install.sh
+  test-wake-preimage.sh
+  test-wake-reconcile.sh
+  test-wake-store-ack.sh
+  test-wake-store-enqueue-race.sh
+)
+[ "${#SUITES[@]}" -eq "$EXPECTED_SUITES" ] ||
+  flag "suite list has ${#SUITES[@]} entries, declared $EXPECTED_SUITES"
+
+# Per-suite sentinel patterns, pinned: nine suites share the harness template
+# (enqueue-race appends a tail after it); preimage uses its own format.
+sentinel_for() {
+  case "$1" in
+  test-wake-preimage.sh) printf '%s' '^== test-wake-preimage: 17/17 passed ==$' ;;
+  *) printf '%s' 'harness: all invariants passed' ;;
+  esac
+}
+
+# --- 0: instrument self-test ------------------------------------------------
+if bash "$HERE/microtest-wake-assert.sh" >"$TMP/microtest.out" 2>&1; then
+  echo "MICROTEST microtest-wake-assert.sh exit=0 (instrument proven)"
+else
+  rc=$?
+  echo "MICROTEST microtest-wake-assert.sh exit=$rc"
+  sed 's/^/  /' "$TMP/microtest.out" | tail -n 15
+  flag "instrument self-test failed — no validate evidence below is trustworthy"
+fi
+
+# --- 1+2: expected set (artifact) vs static inventory (source text) ---------
+python3 "$CHECK" expected | sort >"$TMP/expected.txt" ||
+  flag "check-973.py expected failed"
+n_expected="$(grep -c . "$TMP/expected.txt")"
+echo "EXPECTED-SET $n_expected coordinates (declared: $EXPECTED_SITES)"
+[ "$n_expected" -eq "$EXPECTED_SITES" ] ||
+  flag "expected set has $n_expected coordinates, declared $EXPECTED_SITES"
+
+python3 "$CHECK" static | sort >"$TMP/static.txt" ||
+  flag "check-973.py static failed"
+if cmp -s "$TMP/expected.txt" "$TMP/static.txt"; then
+  echo "STATIC-INVENTORY equals expected set ($(grep -c . "$TMP/static.txt") rows from source text)"
+else
+  flag "static inventory (source text) differs from expected set (artifact):"
+  diff "$TMP/expected.txt" "$TMP/static.txt" | head -n 20 | sed 's/^/  /'
+fi
+
+# --- 3: green instrumented run ----------------------------------------------
+LEDGER="$TMP/ledger"
+: >"$LEDGER"
+for s in "${SUITES[@]}"; do
+  out="$(WAKE_ASSERT_LEDGER="$LEDGER" bash "$WAKE/$s" 2>&1)"
+  rc=$?
+  if printf '%s\n' "$out" | grep -Eq "$(sentinel_for "$s")"; then
+    sent="present"
+  else
+    sent="ABSENT"
+  fi
+  echo "SUITE $s exit=$rc sentinel=$sent"
+  [ "$rc" -eq 0 ] || flag "$s exited $rc in the green instrumented run"
+  [ "$sent" = "present" ] || flag "$s did not emit its sentinel"
+done
+
+# --- 4: trace arithmetic on coordinate sets ---------------------------------
+sort -u "$LEDGER" >"$TMP/trace.txt"
+echo "TRACE $(grep -c . "$TMP/trace.txt") distinct coordinates from $(grep -c . "$LEDGER") ledger rows"
+
+comm -13 "$TMP/expected.txt" "$TMP/trace.txt" >"$TMP/rogue.txt"
+if [ -s "$TMP/rogue.txt" ]; then
+  flag "trace contains coordinates OUTSIDE the frozen denominator:"
+  sed 's/^/  ROGUE /' "$TMP/rogue.txt"
+else
+  echo "TRACE-MINUS-EXPECTED empty (no helper ran at an unmeasured coordinate)"
+fi
+
+comm -23 "$TMP/expected.txt" "$TMP/trace.txt" >"$TMP/unexec.txt"
+n_unexec="$(grep -c . "$TMP/unexec.txt" || true)"
+echo "UNEXECUTED $n_unexec of $EXPECTED_SITES converted sites did not execute in the green run"
+if [ ! -f "$DISPO" ]; then
+  flag "disposition file missing: $DISPO — every unexecuted site must be individually dispositioned"
+  sed 's/^/  UNDISPOSITIONED /' "$TMP/unexec.txt"
+else
+  awk '!/^#/ && NF >= 2 {print $1, $2}' "$DISPO" | sort -u >"$TMP/dispo-keys.txt"
+  comm -23 "$TMP/unexec.txt" "$TMP/dispo-keys.txt" >"$TMP/undispo.txt"
+  comm -13 "$TMP/unexec.txt" "$TMP/dispo-keys.txt" >"$TMP/stale-dispo.txt"
+  if [ -s "$TMP/undispo.txt" ]; then
+    flag "unexecuted sites WITHOUT a disposition:"
+    sed 's/^/  UNDISPOSITIONED /' "$TMP/undispo.txt"
+  fi
+  if [ -s "$TMP/stale-dispo.txt" ]; then
+    flag "dispositions for sites that DID execute (stale — the file no longer matches the run):"
+    sed 's/^/  STALE-DISPO /' "$TMP/stale-dispo.txt"
+  fi
+  if [ ! -s "$TMP/undispo.txt" ] && [ ! -s "$TMP/stale-dispo.txt" ]; then
+    echo "DISPOSITIONS all $n_unexec unexecuted sites individually dispositioned, none stale"
+  fi
+fi
+
+# --- 5: forced-error arms ---------------------------------------------------
+python3 "$CHECK" arms >"$TMP/arms.txt" || flag "check-973.py arms failed"
+n_arms="$(grep -c . "$TMP/arms.txt")"
+echo "ARMS $n_arms forced-error arms (declared: $EXPECTED_ARMS)"
+[ "$n_arms" -eq "$EXPECTED_ARMS" ] ||
+  flag "arm list has $n_arms entries, declared $EXPECTED_ARMS"
+
+while read -r helper site form; do
+  f="${site%%:*}"
+  aled="$TMP/ledger-arm"
+  : >"$aled"
+  out="$(WAKE_ASSERT_LEDGER="$aled" WAKE_ASSERT_FORCE_GREP_ERROR_AT="$site" \
+    bash "$WAKE/$f" 2>&1)"
+  rc=$?
+  bad=""
+  [ "$rc" -ne 0 ] || bad="$bad exit=0"
+  printf '%s\n' "$out" | grep -q "WAKE-ASSERT ARMED: forcing real grep error at $site" ||
+    bad="$bad no-ARMED-line"
+  printf '%s\n' "$out" | grep -q "WAKE-ASSERT ABORT: ${helper} at ${site}: grep exit" ||
+    bad="$bad no-ABORT-line"
+  # AND-polarity check (a match is the defect): a grep error (rc>=2) must be
+  # its own loud arm — it cannot fall through as "no sentinel = pass".
+  rc_sent=0
+  printf '%s\n' "$out" | grep -Eq "$(sentinel_for "$f")" || rc_sent=$?
+  case "$rc_sent" in
+  0) bad="$bad sentinel-emitted" ;;
+  1) : ;;
+  *) bad="$bad sentinel-grep-error-rc=$rc_sent" ;;
+  esac
+  grep -q "^${helper} ${site}\$" "$aled" ||
+    bad="$bad no-ledger-row"
+  if [ -z "$bad" ]; then
+    echo "ARM $site ($form) exit=$rc armed+abort+no-sentinel+ledger-row"
+  else
+    echo "ARM $site ($form) exit=$rc DEFECTS:$bad"
+    flag "arm $site ($form) failed:$bad"
+  fi
+done <"$TMP/arms.txt"
+
+# --- 6: residual sweep ------------------------------------------------------
+if python3 "$CHECK" sweep >"$TMP/sweep.out" 2>&1; then
+  echo "SWEEP exit=0"
+else
+  echo "SWEEP exit=$?"
+  flag "residual sweep failed"
+fi
+sed 's/^/  /' "$TMP/sweep.out"
+
+# --- summary (exit codes above, failure count last — A10) --------------------
+echo
+if [ "$fails" -gt 0 ]; then
+  echo "validate-973: FAILED ($fails failure(s))" >&2
+  exit 1
+fi
+echo "validate-973: OK — $EXPECTED_SUITES suites, $EXPECTED_SITES sites, $EXPECTED_ARMS arms, sweep clean"

packages/mosaic/package.json

@@ -25,7 +25,7 @@
     "lint": "eslint src",
     "typecheck": "tsc --noEmit",
     "test": "vitest run --passWithNoTests && pnpm run test:framework-shell",
-    "test:framework-shell": "python3 src/lease-broker/daemon_deadline_unittest.py && python3 src/lease-broker/normative_fragments_unittest.py && python3 src/lease-broker/receipt_challenge_unittest.py && python3 src/lease-broker/context_recovery_unittest.py && python3 src/lease-broker/recovery_runtime_unittest.py && python3 src/lease-broker/recovery_b1_adversarial_unittest.py && python3 src/lease-broker/framework_skill_portability_unittest.py && python3 src/mutator-gate/runtime_tools_unittest.py && python3 src/mutator-gate/runtime_launch_guard_unittest.py && python3 src/mutator-gate/version_coupling_unittest.py && python3 framework/tools/lease-broker/check-runtime-launches.py --root ../.. && bash framework/tools/codex/test-pr-diff-context.sh && bash framework/tools/qa/test-deps-preflight.sh && bash framework/tools/git/test-pr-review-gitea-comment.sh && bash framework/tools/git/test-pr-review-repo-host-override.sh && bash framework/tools/git/test-ci-queue-wait-branch-absent.sh && bash framework/tools/git/test-git-credential-mosaic.sh && bash framework/tools/git/test-gitea-token-identity.sh && bash framework/tools/_scripts/test-install-ordering-guard.sh && bash framework/tools/tmux/agent-send.test.sh && bash framework/tools/wake/test-wake-store-ack.sh && bash framework/tools/wake/test-wake-store-enqueue-race.sh && bash framework/tools/wake/test-wake-digest-hmac.sh && bash framework/tools/wake/test-wake-digest-quarantine.sh && bash framework/tools/wake/test-wake-detector.sh && bash framework/tools/wake/test-wake-fn-oracle.sh && bash framework/tools/wake/test-wake-reconcile.sh && bash framework/tools/wake/test-wake-beacon.sh && bash framework/tools/wake/test-wake-preimage.sh && bash framework/tools/wake/test-wake-install.sh"
+    "test:framework-shell": "bash framework/tools/quality/scripts/check-test-enumeration.sh && bash framework/tools/quality/scripts/test-check-test-enumeration.sh && python3 src/lease-broker/daemon_deadline_unittest.py && python3 src/lease-broker/normative_fragments_unittest.py && python3 src/lease-broker/receipt_challenge_unittest.py && python3 src/lease-broker/context_recovery_unittest.py && python3 src/lease-broker/recovery_runtime_unittest.py && python3 src/lease-broker/recovery_b1_adversarial_unittest.py && python3 src/lease-broker/framework_skill_portability_unittest.py && python3 src/mutator-gate/runtime_tools_unittest.py && python3 src/mutator-gate/runtime_launch_guard_unittest.py && python3 src/mutator-gate/version_coupling_unittest.py && python3 framework/tools/lease-broker/check-runtime-launches.py --root ../.. && bash framework/tools/codex/test-pr-diff-context.sh && bash framework/tools/qa/test-deps-preflight.sh && bash framework/tools/git/test-pr-review-gitea-comment.sh && bash framework/tools/git/test-pr-review-repo-host-override.sh && bash framework/tools/git/test-ci-queue-wait-branch-absent.sh && bash framework/tools/git/test-git-credential-mosaic.sh && bash framework/tools/git/test-gitea-token-identity.sh && bash framework/tools/_scripts/test-install-ordering-guard.sh && bash framework/tools/tmux/agent-send.test.sh && bash framework/tools/wake/test-wake-store-ack.sh && bash framework/tools/wake/test-wake-store-enqueue-race.sh && bash framework/tools/wake/test-wake-digest-hmac.sh && bash framework/tools/wake/test-wake-digest-quarantine.sh && bash framework/tools/wake/test-wake-detector.sh && bash framework/tools/wake/test-wake-fn-oracle.sh && bash framework/tools/wake/test-wake-reconcile.sh && bash framework/tools/wake/test-wake-beacon.sh && bash framework/tools/wake/test-wake-preimage.sh && bash framework/tools/wake/test-wake-install.sh"
   },
   "dependencies": {
     "@mosaicstack/brain": "workspace:*",