#!/usr/bin/env bash
# test-upgrade-rollback.sh — the #791 B1 regression gate.
#
# A keep-mode upgrade takes a pre-update snapshot and installs an ERR/INT/TERM
# trap that restores it if the sync aborts midway (install.sh: make_snapshot +
# `trap restore_snapshot`). That trap is only reached if `set -E` (errtrace) is
# active — otherwise a failure INSIDE sync_framework_keep() (which runs entirely
# in a function) never fires the trap, and the upgrade aborts leaving a
# half-written target with NO rollback. This test proves:
#
#   Part A (the gate):   the shipped installer rolls back a mid-sync failure —
#                        the restore message fires, the corrupted file is put
#                        back, AND the whole target is byte-identical to its
#                        pre-upgrade state.
#   Part B (the control): the SAME installer with `-E` stripped does NOT roll back
#                        (dead trap) — the mid-sync corruption survives, proving
#                        errtrace is load-bearing. If anyone removes `set -E`,
#                        Part A goes red.
#
# The mid-sync failure is injected with a PATH-shadowing `cp` shim rather than
# file permissions. The earlier 0400/EACCES approach was NOT portable: Woodpecker
# runs steps as root (node:24-alpine has no USER directive), and root overwrites a
# 0400 file, so the failure never fired and this gate silently passed (#791
# blocker-3). The shim fails deterministically for one framework-owned
# destination regardless of uid, and — like a real interrupted cp (disk-full
# mid-write) — leaves a partially-written target behind, so rollback has real
# damage to undo and the control has real damage to expose.
#
# Usage:  bash test-upgrade-rollback.sh
set -uo pipefail

FW="$(cd "$(dirname "${BASH_SOURCE[0]}")/../../.." && pwd)"   # packages/mosaic/framework
INSTALL="$FW/install.sh"
ORIG_PATH="$PATH"

# The `-E`-stripped control installer must live INSIDE $FW: install.sh derives
# SOURCE_DIR from its own path and `source`s $SOURCE_DIR/tools/_lib/manifest.sh,
# so a copy anywhere else aborts at the source line before ever reaching the sync
# loop — which would make the control a false negative. A root dotfile is
# operator-owned (unknown→operator), so the sync loop skips it. Clean up on exit.
STRIPPED="$FW/.install-rollback-control.tmp.sh"
NOEXIT="$FW/.install-noexit-control.tmp.sh"
D1CTRL="$FW/.install-d1guard-control.tmp.sh"
D2CTRL="$FW/.install-d2guard-control.tmp.sh"
rm -f "$STRIPPED" "$NOEXIT" "$D1CTRL" "$D2CTRL"
trap 'rm -f "$STRIPPED" "$NOEXIT" "$D1CTRL" "$D2CTRL"' EXIT

pass=0; fail=0
chk() { if eval "$2"; then echo "  ✓ $1"; pass=$((pass + 1)); else echo "  ✗ $1"; fail=$((fail + 1)); fi; }

SECRET='SUPER-SECRET-TOKEN-do-not-log-b1'
# A framework-owned file the shim fails the copy of. The seeded target holds GOOD
# bytes; source ships different bytes, so sync_framework_keep() attempts the copy
# and the shim intercepts it. Root-level framework files sort before guides/, so
# several framework files are already refreshed when the copy reaches this one.
POISON_REL='guides/E2E-DELIVERY.md'
GOOD='GOOD-REFERENCE-CONTENT-pre-upgrade-b1'
GARBAGE='PARTIAL-WRITE-GARBAGE-mid-sync-b1'

# A `cp` shim: for the poisoned destination, simulate an interrupted copy — write
# partial garbage to the target, then fail — otherwise delegate to the real cp
# (resolved via the ORIGINAL PATH so make_snapshot/restore still work).
make_cp_shim() {
  local dir="$1"
  cat > "$dir/cp" <<SHIM
#!/usr/bin/env bash
dest="\${@: -1}"
case "\$dest" in
  */$POISON_REL)
    printf '%s' '$GARBAGE' > "\$dest" 2>/dev/null || true
    exit 1 ;;
esac
exec env PATH="$ORIG_PATH" cp "\$@"
SHIM
  chmod +x "$dir/cp"
}

# A `find` shim that fails every enumeration scan (`-print0`) as if it hit an
# EACCES/I/O error partway — it emits the real (here: complete) list first, then
# exits non-zero, exactly the class of failure a `< <(find …)` process
# substitution silently swallows. All non-`-print0` finds (e.g. the -delete
# sweep) delegate to the real find on the original PATH. Used to prove #791
# blocker-D1: the shipped installer must honor find's exit status and roll back.
make_find_fail_shim() {
  local dir="$1"
  cat > "$dir/find" <<SHIM
#!/usr/bin/env bash
for a in "\$@"; do
  if [ "\$a" = "-print0" ]; then
    env PATH="$ORIG_PATH" find "\$@"   # emit the real list…
    exit 1                              # …then fail as if the scan hit EACCES
  fi
done
exec env PATH="$ORIG_PATH" find "\$@"
SHIM
  chmod +x "$dir/find"
}

# An `rm` shim that fails ONLY `rm -rf <FAIL_RM_TARGET>` (the restore's target
# reset) and delegates every other rm to the real one. Used to prove #791
# blocker-D2: when the target reset inside restore_snapshot fails, the installer
# must emit the manual-recovery pointer (snapshot path) instead of exiting
# silently under `set -e`. FAIL_RM_TARGET is exported into the installer env.
make_rm_fail_shim() {
  local dir="$1"
  cat > "$dir/rm" <<'SHIM'
#!/usr/bin/env bash
last="${@: -1}"
if [ -n "${FAIL_RM_TARGET:-}" ] && [ "$last" = "$FAIL_RM_TARGET" ]; then
  exit 1
fi
exec env PATH="$ORIG_PATH_FOR_RM" rm "$@"
SHIM
  chmod +x "$dir/rm"
}

seed_home() {
  local H="$1"
  mkdir -p "$H/agents" "$H/tools/_lib" "$H/memory" "$H/guides"
  printf '# persona\n' > "$H/SOUL.md"          # recognized install → keep mode + snapshot
  printf 'MODEL=opus\n' > "$H/agents/coder0.conf"
  printf '# operator memory\n' > "$H/memory/note.md"
  printf 'TOKEN=%s\n' "$SECRET" > "$H/tools/_lib/credentials.json"
  echo 3 > "$H/.framework-version"
  # Good pre-upgrade bytes; source ships different bytes, so cp is attempted.
  printf '%s' "$GOOD" > "$H/$POISON_REL"
}

# Run one keep-mode upgrade against $1=installer, seeding a fresh home and a
# byte-for-byte reference of the pre-upgrade state, with the cp shim first on
# PATH. Echoes: "<exit>\t<out>\t<ref>\t<home>".
run_upgrade() {
  local installer="$1" shim_maker="${2:-make_cp_shim}" H REF OUT SHIM rc
  H=$(mktemp -d); REF=$(mktemp -d); OUT=$(mktemp); SHIM=$(mktemp -d)
  seed_home "$H"
  env PATH="$ORIG_PATH" cp -a "$H/." "$REF/"     # pre-upgrade reference (real cp)
  "$shim_maker" "$SHIM"
  set +e
  PATH="$SHIM:$ORIG_PATH" \
    MOSAIC_HOME="$H" MOSAIC_INSTALL_MODE=keep MOSAIC_SYNC_ONLY=1 bash "$installer" >"$OUT" 2>&1
  rc=$?
  set -e 2>/dev/null || true
  rm -rf "$SHIM"
  printf '%s\t%s\t%s\t%s\n' "$rc" "$OUT" "$REF" "$H"
}

echo "#791 upgrade rollback (B1 regression gate):"

# ── Part A: the shipped installer must roll back a mid-sync failure ───────────
IFS=$'\t' read -r rcA OUTA REFA HA < <(run_upgrade "$INSTALL")

chk "[shipped] upgrade aborts non-zero on the injected mid-sync failure" \
  "[ '$rcA' -ne 0 ]"
chk "[shipped] restore_snapshot fires (rollback message present)" \
  "grep -q 'restoring previous state from snapshot' '$OUTA'"
chk "[shipped] the corrupted file is restored to its pre-upgrade bytes" \
  "[ \"\$(cat '$HA/$POISON_REL')\" = '$GOOD' ]"
chk "[shipped] target rolled back byte-identical to pre-upgrade state" \
  "diff -r '$REFA' '$HA' >/dev/null 2>&1"
chk "[shipped] operator secret value absent from installer output" \
  "! grep -q '$SECRET' '$OUTA'"

# ── Part B: control — strip `-E`, the trap is dead, no rollback happens ───────
# Proves errtrace is what makes the trap reachable. If `set -E` is ever removed
# from install.sh, Part A's rollback assertions fail exactly like this control.
sed 's/^set -Eeuo pipefail/set -euo pipefail/' "$INSTALL" > "$STRIPPED"
chk "[control] the -E strip actually changed the installer" \
  "! cmp -s '$INSTALL' '$STRIPPED'"

IFS=$'\t' read -r rcB OUTB REFB HB < <(run_upgrade "$STRIPPED")
chk "[control] without -E the upgrade still aborts non-zero" \
  "[ '$rcB' -ne 0 ]"
# The load-bearing, deterministic proof of B1: without errtrace the ERR trap
# never fires for a failure inside sync_framework_keep(), so no rollback runs.
chk "[control] without -E the rollback message does NOT fire (dead trap)" \
  "! grep -q 'restoring previous state from snapshot' '$OUTB'"
chk "[control] without -E the mid-sync corruption survives (no rollback)" \
  "[ \"\$(cat '$HB/$POISON_REL')\" = '$GARBAGE' ]"

# ── Part C: an INT/TERM interrupt must terminate, not resume (blocker-A) ──────
# A bash signal trap that merely returns lets the script continue past the
# interrupt — restoring the snapshot, then resuming the sync and reporting
# success. We inject a SIGTERM mid-sync with a cp that SUCCEEDS (so set -e never
# fires and ONLY the signal path governs), and assert the shipped installer
# restores AND exits without reporting success. The control strips `exit 1` from
# the trap and shows the buggy resume-to-success.
make_term_shim() {
  local dir="$1"
  cat > "$dir/cp" <<SHIM
#!/usr/bin/env bash
dest="\${@: -1}"
case "\$dest" in
  */$POISON_REL)
    kill -TERM "\$PPID" 2>/dev/null   # signal install.sh; the copy still succeeds
    exec env PATH="$ORIG_PATH" cp "\$@" ;;
esac
exec env PATH="$ORIG_PATH" cp "\$@"
SHIM
  chmod +x "$dir/cp"
}

# Run one keep-mode upgrade with the SIGTERM shim. Echoes "<exit>\t<out>\t<home>".
run_signal_upgrade() {
  local installer="$1" H OUT SHIM rc
  H=$(mktemp -d); OUT=$(mktemp); SHIM=$(mktemp -d)
  seed_home "$H"
  make_term_shim "$SHIM"
  set +e
  PATH="$SHIM:$ORIG_PATH" \
    MOSAIC_HOME="$H" MOSAIC_INSTALL_MODE=keep MOSAIC_SYNC_ONLY=1 bash "$installer" >"$OUT" 2>&1
  rc=$?
  set -e 2>/dev/null || true
  rm -rf "$SHIM"
  printf '%s\t%s\t%s\n' "$rc" "$OUT" "$H"
}

IFS=$'\t' read -r rcC OUTC HC < <(run_signal_upgrade "$INSTALL")
chk "[signal] SIGTERM mid-sync aborts non-zero (trap exits, does not resume)" \
  "[ '$rcC' -ne 0 ]"
chk "[signal] restore_snapshot fires on the interrupt" \
  "grep -q 'restoring previous state from snapshot' '$OUTC'"
chk "[signal] does NOT resume to report sync success after the interrupt" \
  "! grep -q 'file phase complete' '$OUTC'"

# Control: strip `exit 1` from the signal trap → the handler returns, the script
# resumes past the interrupt and wrongly reports success. In $FW so SOURCE_DIR resolves.
sed "s/trap 'restore_snapshot; exit 1' ERR INT TERM/trap 'restore_snapshot' ERR INT TERM/" \
  "$INSTALL" > "$NOEXIT"
chk "[control] the exit-strip actually changed the installer" \
  "! cmp -s '$INSTALL' '$NOEXIT'"
IFS=$'\t' read -r _rcD OUTD HD < <(run_signal_upgrade "$NOEXIT")
chk "[control] without 'exit 1' the trap resumes and reports sync success (the bug)" \
  "grep -q 'file phase complete' '$OUTD'"

# ── Part D: a failed source/prune `find` scan must abort + roll back (D1) ─────
# A `< <(find …)` process substitution discards find's exit status, so an
# EACCES/I/O failure mid-scan would truncate the file list yet leave the reading
# loop exiting 0 — a partial upgrade committed and reported as success, with the
# ERR/restore trap never firing. The shipped installer captures the scan into a
# checked temp file (_scan_or_die) and aborts on failure. We inject a `find` that
# fails every `-print0` scan and assert the shipped installer rolls back.
IFS=$'\t' read -r rcE OUTE REFE HE < <(run_upgrade "$INSTALL" make_find_fail_shim)
chk "[find-fail] a failing framework scan aborts the upgrade non-zero" \
  "[ '$rcE' -ne 0 ]"
chk "[find-fail] restore_snapshot fires on the aborted scan" \
  "grep -q 'restoring previous state from snapshot' '$OUTE'"
chk "[find-fail] the abort is a fail-closed enumeration error (not a silent truncation)" \
  "grep -q 'Could not enumerate framework files' '$OUTE'"
chk "[find-fail] target rolled back byte-identical to pre-upgrade state" \
  "diff -r '$REFE' '$HE' >/dev/null 2>&1"

# Control: neuter the D1 guard (turn its `return 1` into a no-op) so a find
# failure is swallowed exactly as `< <(find …)` would — the scan appears to
# succeed and the upgrade reports completion with NO rollback.
sed 's/return 1  # D1-GUARD/: # D1-GUARD-DISABLED/' "$INSTALL" > "$D1CTRL"
chk "[control] the D1-guard strip actually changed the installer" \
  "! cmp -s '$INSTALL' '$D1CTRL'"
IFS=$'\t' read -r _rcF OUTF REFF HF < <(run_upgrade "$D1CTRL" make_find_fail_shim)
chk "[control] with the D1 guard disabled the find failure is swallowed (no rollback)" \
  "! grep -q 'restoring previous state from snapshot' '$OUTF'"
chk "[control] with the D1 guard disabled the upgrade wrongly reports success" \
  "grep -q 'file phase complete' '$OUTF'"

# ── Part E: a failed target reset inside restore must not exit silently (D2) ──
# restore_snapshot resets the target (`rm -rf; mkdir -p`) before rebuilding from
# the snapshot. Under `set -e` (trap disarmed) a bare reset that fails would exit
# the whole script immediately — after `rm` may have deleted part of the target —
# WITHOUT printing where the snapshot lives. We trigger a rollback (cp poison) AND
# fail the target reset (rm shim), then assert the shipped installer emits the
# manual-recovery pointer and preserves the snapshot.
run_rmfail_upgrade() {
  local installer="$1" H OUT SHIM rc
  H=$(mktemp -d); OUT=$(mktemp); SHIM=$(mktemp -d)
  seed_home "$H"
  make_cp_shim "$SHIM"        # poison cp → triggers the abort + restore
  make_rm_fail_shim "$SHIM"   # rm -rf <H> fails → exercises the D2 reset guard
  set +e
  PATH="$SHIM:$ORIG_PATH" ORIG_PATH_FOR_RM="$ORIG_PATH" FAIL_RM_TARGET="$H" \
    MOSAIC_HOME="$H" MOSAIC_INSTALL_MODE=keep MOSAIC_SYNC_ONLY=1 bash "$installer" >"$OUT" 2>&1
  rc=$?
  set -e 2>/dev/null || true
  rm -rf "$SHIM"
  printf '%s\t%s\t%s\n' "$rc" "$OUT" "$H"
}

IFS=$'\t' read -r rcG OUTG HG < <(run_rmfail_upgrade "$INSTALL")
chk "[reset-fail] a failed target reset still aborts non-zero" \
  "[ '$rcG' -ne 0 ]"
chk "[reset-fail] the manual-recovery pointer is emitted (not a silent set -e exit)" \
  "grep -q 'Snapshot restore could not reset' '$OUTG'"
chk "[reset-fail] the recovery message points at a preserved snapshot dir" \
  "grep -q 'preserved at: .*mosaic-snapshot' '$OUTG'"
SNAP_E="$(grep -o '/[^ ]*mosaic-snapshot[^ ]*' "$OUTG" | head -1)"
chk "[reset-fail] the named snapshot directory actually survives for recovery" \
  "[ -n '$SNAP_E' ] && [ -d '$SNAP_E' ]"
chk "[reset-fail] operator secret value never appears in installer output" \
  "! grep -q '$SECRET' '$OUTG'"

# Control: delete the D2 recovery line so a failed reset returns non-zero with NO
# operator pointer — the observable defect (half-reset target, snapshot orphaned
# in /tmp with no path told to the operator). Proves the message is load-bearing.
sed '/Snapshot restore could not reset/d' "$INSTALL" > "$D2CTRL"
chk "[control] the D2-recovery strip actually changed the installer" \
  "! cmp -s '$INSTALL' '$D2CTRL'"
IFS=$'\t' read -r _rcH OUTH HH < <(run_rmfail_upgrade "$D2CTRL")
chk "[control] without the D2 recovery line the operator gets no snapshot pointer" \
  "! grep -q 'Snapshot restore could not reset' '$OUTH'"
[ -n "${SNAP_E:-}" ] && rm -rf "$SNAP_E"
# Reap any snapshot the reset-fail runs left in /tmp (reset failed → never cleaned).
grep -o '/[^ ]*mosaic-snapshot[^ ]*' "$OUTH" 2>/dev/null | head -1 | while read -r s; do rm -rf "$s"; done

# Cleanup ($STRIPPED / $NOEXIT / $D1CTRL / $D2CTRL are also removed by the EXIT trap).
for d in "$HA" "$REFA" "$HB" "$REFB" "$HC" "$HD" "$HE" "$REFE" "$HF" "$REFF" "$HG" "$HH"; do rm -rf "$d"; done
rm -f "$OUTA" "$OUTB" "$OUTC" "$OUTD" "$OUTE" "$OUTF" "$OUTG" "$OUTH" \
  "$STRIPPED" "$NOEXIT" "$D1CTRL" "$D2CTRL"

echo
echo "RESULT: $pass passed, $fail failed"
[ "$fail" -eq 0 ]