The organization file gains packs, board and workflows, and each code
project gains board and workflows. The reader checks their shapes and keeps
them on the loaded organization and on projects[id]. A workflow step's roles
are checked for shape only at load; applyPack resolves them at write time
(org definition, V2 template or human). An inline proposed hire keeps its
full role entry beside its {inline, sha256} pin, bounded as a definition
entry is.
applyPack(id, plan, {revision, actor, assertClean}) writes definitions,
board, workflows, project boards and workflows and one packs entry in one
commit. It keeps setDefinition's definition rules, refuses an agent writing
a definition with human-required, and refuses any other plan key.
A copy binding grants the repositories its projects' remotes name when a
credential is issued, and its decision records only project names. repo set
(CLI, route, Settings tab) is now refused with project-repo-bound while a
pending or bound copy binding names the project, before any check, origin
change or write, and again under the lock. The message names the copies and
the next step: revoke the binding, set the repository, raise a new binding
decision. An unbound binding, or none, behaves as before. Bindings are read
from the loader-validated document; binding, launcher and broker code are
unchanged. New refusal-table entry for project-repo-bound.
The check's ssh client accepts any host key, so an answer over ssh shows
only that something at that address speaks git. Security review P2: a
reachable or needs-credential ssh outcome now adds "the ssh host key was
not verified"; https and unreachable outcomes are unchanged.
The needs-credential line no longer promises that a binding will supply
one; it says the check sends none. A recorded check is shown only for
the URL it checked. The Settings section says when the git origin differs
from the recorded repository, and a save repairs it. The URL rule message
names what is refused. Tests cover a document write that fails after
origin is set, the drift line and its repair, and Quick Setup in remote
mode.
Remote mode sets the project checkout's origin and checks it once with
git ls-remote, with no credential, no prompt, a protocol allowlist of
https and ssh and a 15 second limit. The receipt reports reachable,
needs-credential or unreachable with git's error summarized. Nothing is
pushed. URLs are https or ssh only; ext:: and other helpers, file://,
local paths, option-like values and credential-bearing URLs are refused.
`mosaic org project repo set` changes a project's repository later, both
ways between remote and local only, through the same rules and check,
with a revision guard and an org.project.repo.set receipt. The Console's
organization project Settings tab edits it through
/api/orgs/ID/repo/project/PROJECT; Quick Setup accepts ssh and shows the
check.
- The copy launch gate reads the organization registry entry on every
check for a verified copy. A state other than active, or a new
incarnation, refuses credential-revoked; an unreadable registry
refuses credential-unavailable.
- Repository reads need read or write repository scope, like writes
need write scope.
- The admitted organization revision travels from the launcher through
bindLaunch. prepare checks it before and after the live proof, and
admit checks it after the launch authority; a change refuses
organization-changed.
- Tests for the completion authority recheck, the broker session
authority compare and an incarnation change; the copyRefusal comment
now names where restart-required is answered.
Materialize only verified bound copies: a binding approved after boot
answers restart-required. Boot and every launch re-resolve the binding
and prove the slot live against its service; unavailable verification,
a partial binding or a stale file refuses. The A3 revision fence and
the launch authority digest ride through prepare, final admission and
bindLaunch. Pending revocation blocks admission and no fence is
released on an uncertain outcome.
Every copy credential call checks session, incarnation, scopes,
generation and liveness, takes the slot from the session, goes only to
the approved origin with redirects refused, and rechecks the generation
at completion. Prepare and boot proofs run inside a time budget so a
silent service cannot stall the host channel. The launcher maps a
copyLaunch refusal to its own code instead of launch-failed.
Tests: copy-launch unit suite, CLI launch and race cases (prepare and
bind races assert no repo call, empty project manifest included), and a
docker acceptance on gitea 1.27.1.
- autonomy set: an empty --authority-resolver clears the resolver as the
panel does; --reverse-window-hours takes 1 to 168, as the page and bus do.
- The default instance gets a one-line refusal (exit 3) naming the named
instance and --dev-local-owner, not a stack trace.
- tasks create|edit|archive: a value starting with -- is a usage error;
--business is checked before the agent guard, and the guard also reads
process.env.
- Drop the unused consoleRefusal export.
- Docs: --business is required, resolver clearing, window range, and the
named-instance requirement.
The panel's revision is the bus's sha256 of the organization, so a
whole-number --revision could never match a real Console. The fake in
cli-parity now answers hex revisions, and a whole number is a usage error.
mosaic org role-templates|hire|change|fire and mosaic org autonomy
[set|review] send the hire form's and the autonomy panel's own requests
to the running Console's org route, so the Console runs the same owner,
send, origin, body and revision checks and the same bus verbs. They
refuse inside an agent run after their usage checks.
mosaic tasks create|edit|archive pass the board's parseTaskWrite and go
to the bus as the person (tasks.create|edit|archive).
Docs: cli README, docs/TOOLS.md, webui README Console actions table.
P1-4: org restore starts the bus as mosaic bus start ID --dev-local-owner
--detach would, and its receipt names the bus. Where that start is refused
(deployed or stamped instance, agent run) restore refuses before changing
anything; --no-bus keeps the old restore. The Console Restore action
restores and starts the bus with one receipt, and offers Restart bus when
the start fails after a good restore.
P1-5: Quick Setup refreshes the sidebar organization list, and the
organization dashboard redraws on the config event Restart bus already
dispatches, so the bus line and System types follow without a reload.
Security review P2: a hard crash after the stage left the staged token
on disk. sweepCopySlots runs at start, before Credentials loads, and
removes each copy service slot whose binding holds no grant, plus any
staged temp file. It never touches a role's slots, a slot a loaded
reference names, or an organization whose document cannot be read. A
stage write that fails removes its temp file, and its slot when the
rename has already happened.
Build review P3s: push is held to the binding's approved level, not the
token's. Tests now cover the boot-copy pre-checks, the format check
running before the stage, and stageCopy's reference refusal.
An owner-issued Gitea token for an agent copy is staged inactive in the
self-only store, proved live against the copy's Gitea (token scopes by
semantic comparison with all and admin refused, the copy's dedicated
per-org/copy/service account, every reachable repository, expiry), then
committed under the writer's generation, revision, decision, copyId,
incarnation and definition-pin recheck. The grant record holds only an
opaque grant id and rotate date. Vikunja refuses
credential-scope-unverified. Copies still cannot launch (CB3).
Security review:
- Release verification cache keys on ctime as well as mtime, in
nanoseconds. A same-size rewrite with mtime set back now re-hashes and
reports proxy-install-invalid.
Build review:
- The setup page hides the account panels on any failed accounts read, not
only proxy-down, and brings them back once the proxy answers.
- The organizations table shows a dash, not a made-up 0, when a bus does
not answer or sends no model list (orgCatalogue in proxy-admin.mjs).
- A fence clear the bus did not answer keeps the confirmed restart for a
retry.
- A fence with no readable time names `mosaic proxy fence clear
--proxy-restarted` on the page, in the refusal table and in the README.
- CLI `init --generate-key` goes through the setup controller and writes
the same init receipt as the page.
- Status carries the last ten receipts, so the page shows them after a
reload. An initialized proxy keeps the init form folded.
- README: proxy-admin-busy is per process; the cross-process locks that
serialize the writes are named.
One Proxy setup panel on the Model proxy settings page takes an owner from
nothing to a running proxy: status with one next-step button per state, the
pinned fetch with hash checks, progress and a receipt, init with a
bus-generated key (a pasted key only over loopback or HTTPS, with a
confirmation), unit render/install/start/stop/restart with health, a fence
clear that the bus re-proves against a confirmed restart, and a stale init
lock clear that names its blockers. Own proxy per organization shows as not
built.
New Console routes under /api/proxy/admin/ use the existing owner proxy
checks; agents, testers and grant holders get human-required. New bus verbs
proxy.init {generate:true} and proxy.fence.clear. Receipts go to
<dataRoot>/state/proxy-admin.jsonl with labels and key ids only. Every new
refusal code has a refusal-table entry.
CLI: mosaic proxy status, unit render|status|install|start|stop|restart,
init --generate-key, fence clear --restart, init-lock status|clear; proxy
fetch keeps its stdout and adds progress and the receipt.
Page fix found in the end-to-end run: a stopped proxy hides the account
panels until the service answers. (The catalogue switch label fix found in
the same run landed upstream as D3 P0-4.)
org delete checks --if-revision before --confirm again, so a bad revision
without --confirm says "invalid revision" as it did on BASE.
The archive and delete "bus untouched" check moves from the status test,
whose fixture has no owner file, to the Restart bus test, which has a real
organization and a live bus. An agent run's archive and delete exit 3 and
leave the bus pid and the organization unchanged; the same archive from a
human shell stops the host, and restore makes the organization active again.
Build review finding 2: org archive and org delete stop the organization's
bus, so they now refuse inside an agent run like bus stop, after their usage
checks and before any config is read. Finding 3 (also security P3): the
--pm/--no-launch and Console LAN flag checks now come before the refusal,
so a usage error exits 4 as the docs say.
D2 security re-check P1 (agent-guard). mosaic bus start|stop|restart and
mosaic console start (with or without --dev-local-owner), stop and restart
refuse inside an agent run with refuseInsideAgent's refusal (exit 3), as
bus recover does. The check reads the given environment and this process's
own, so a sanitized io.env does not hide a marker; bus recover and console
restart now check both too. consoleStart refuses for every Console. Status
verbs stay open. No new marker list and no new human gate.
The Console's Restart bus runs org-bus.mjs in the Console process; its new
host goes through the guarded CLI entry with the Console's own environment.
Restart Console relaunches under the supervisor without the CLI.
A stop that may already have signalled the host (a timeout or an
unexpected error) is trailed as failed, not refused; only exit 3 comes
before the signal. The response's stopped flag follows what busStop
reports, so a host that exited on its own between the read and the stop
is not reported as stopped by this press.
POST /api/orgs/ID/stop/bus runs busStop the way mosaic bus stop does: a
graceful SIGTERM close that leaves no host.lock or writer.lock, so an
offline schema migration can open the store straight after. It follows
restartBus for authority, same-origin checks, trail and receipt. A bus
already stopped answers done with state stopped and changes nothing; a
host identity the Console cannot prove refuses with every file unchanged.
The organization header gains a Stop bus button beside Restart bus, one
press, sharing its receipt and busy state. The restart icon now lives
inside its button, so a wide receipt no longer pulls it off the button.
Security review P2s:
- A binding proposal keeps only its structured request fields. The
free-text reason is never written to the private proposal or covered
by its digest.
- A root copy's receipts are checked at prepare, at check, and again
under the organization lock before the write and before publication.
A copy removed, replaced or unreadable since boot refuses with
instance-fired, copy-stale or root-policy-unreadable.
Build review P2:
- A root copy's admitted projects come from the project unions,
recomputed from the current document and the boot's root agents. A
project that excludes the copy, or whose union refuses, is never in
reach; a request naming it refuses with credential-scope-exceeded.
Build review P3s: tests for proposal-time shadowing, the loader's
copyBindings validation, a pending record that covers every service,
a stricter path check on the refusal table, and refusal codes on every
bare rejects in the binding tests.
CB0: registry incarnation minted at reserve (legacy entries get one at
the first binding proposal, under the registry lock); copyId, source
and definition pin, binding generation; a pure resolver where
effective = role intersect approved and only a bound, matching,
unshadowed record resolves.
CB1: copyBindings in the organization file (ids, scope names, project
ids and integers only). applyCopyBindingDecision is its only writer,
behind a module-private capability every other commit is fenced
against. A binding is an owner-only subtype of the hire decision:
only the chief raises it, no autonomy level, resolver agent, member
right, tester or reader resolves it. Digest, expiry, single
consumption, revision, generation, incarnation and definition pin are
rechecked before any effect; a bind writes pending, an unbind the
unbound tombstone, receipts are paths only. Nothing writes bound, so
nothing launches on a binding yet (CB2/CB3). The org service and the
Console update path keep copyBindings server-held. Eight new refusal
codes with next steps.
The agent-run refusal on a dev-local-owner start now checks the starting
process's own environment as well as the environment given for the
Console, so a caller cannot pass a clean env to get past it.
The start lock now names its holder (pid and start time). A detached
start that times out and kills its supervisor's process group clears the
lock only when it names that supervisor and the supervisor is gone, so a
forced kill no longer blocks every later start.
Build review P2: the supervisor ignores a lost reply pipe and keeps
supervising. Security P2: a stop signal during start is held until the
start settles, and the CLI's start timeout signals the supervisor's
process group. Security P1 (part): console start --dev-local-owner
refuses inside an agent run. Tests cover review, confirm and reverse on
the org autonomy route; TOOLS.md and the webui README are corrected.
A --dev-local-owner Console's organization pages read writable:false because
the per-org options had no autonomy writer and the route fell back to the
request transport, which org options never set. The org options now carry an
autonomy writer on the organization's console transport, fenced to the four
owner autonomy verbs. The route prefers it and keeps requestWrite otherwise.
mosaic console start --dev-local-owner --detach now runs the Console under a
detached supervisor, so Restart Console (exit 75) relaunches it on the same
address. A non-dev detached Console is unchanged. A deployed --sso --send
Console has no organization routes and keeps its root autonomy transport;
a test pins both.
- busRecover: a live pid with the recorded start time is the recorded process, so it refuses
("bus host identity is uncertain") whatever its argv. It used to read a mismatching argv as a dead
host. The pinned recovery test now covers a reused pid (live, other start time) as the wrong
process, and a new test covers the refusal.
- busRecover clears through setAside: each inspected entry is renamed aside and checked by device
and inode; a swapped entry puts everything back and refuses before any receipt or deletion, and
the deletion names only the aside entries.
- mosaic bus recover refuses inside an agent run (refuseInsideAgent), like mosaic org reload. The
Console-start revive does nothing when the Console's own environment carries an agent marker.
- Tests: org-recovery (identity, agent refusal), org-revive (setAside swap), bus-revive (markers);
the other reviveBuses tests pass an explicit env.
- The Console-start revive asks busRevive for pm:false; reviveStartOptions holds the rule (never
wider than the dead host's record) and is tested on its own. A dropped --pm is logged with the
way back.
- A Restart bus press waits for that organization's start-up revive (revivePending) before it reads
the bus, so it no longer races it for the lifecycle lock; a press that still meets org-locked gets
409 bus-busy, nothing changed.
- busRevive marks an error from busStart after a successful clear (error.recovered); the trail, the
Console log and the press response then say "failed", not "refused". A non-CliError logs its code.
- Tests: bus-revive.test.mjs (new), org-admin and org-revive cases for the above.
A Console unit stop (KillMode=mixed) SIGKILLs the bus hosts the Console
started, leaving host.json, host.lock and the socket behind, and the
dev Console's Restart bus refused 409 on that stale state.
- busRevive (org-bus): busRecover, then busStart detached on the
options the dead host recorded. busRecover still refuses a live host
pid, a lock that is not the dead host's, a live writer pid, or a
socket that answers or is uncertain.
- reviveBuses (webui): when a dev-local-owner Console starts, a bus that
answers is left (reattached); a bus with stale state goes to busRevive
with pm:false, trailed as bus.revive before anything changes.
- Restart bus (org-admin): for the exact dev owner only, a stale-state
refusal goes to busRevive; a signed-in owner keeps the refusal.
- The receipt reads "Dead bus host cleared; bus started".
A replaced installed harness answers null for countsAccount until the
bus restarts and reads the new module. A runtime test pins the
startBroker wiring for claude-code (covered) and pi (refused). The
plugin README says countsAccount also decides authority coverage and
is read once at start.
authorityBudgetCovered named claude-code to decide whether an account
quota covers every future launch, which fails the row 65 scan. The bus
host now passes each harness module's own countsAccount answer, read
once with its levels in harnessLevels, through autonomyHost to the
broker. Without the lookup no account quota counts (fail closed); the
provider/model branch is unchanged.
The catalogue refusals no longer tell every user to press Disable model
proxy catalogue. The server text names the proxy setup step. The Routing
page adds the Disable step only when cliproxy is listed and every moved
model comes from another listed provider, and sends a tester to the
owner. The switch mismatch message no longer claims a setting changed.
Tests: a fallback thinking-only change saves with no catalogue; a move
between model-proxy models refuses before and after cliproxy is removed.
A fixture-only organization reads a ready catalogue with no model proxy
client: the catalogue asks the proxy only when a module calls it.
A thinking-only change, and a limits patch that keeps harness, model and
entry, no longer asks the catalogue. A change that truly needs it still
refuses, and the WebUI names the next step: keep the model and change
thinking, or press Disable model proxy catalogue. The Routing switch
follows whether cliproxy is listed and removes or adds only cliproxy.
D4 review fix round.
P2: the org inbox took the hire form's HTML before its workspace read, so typing or a
submit result that landed during a slow read was painted over with the older draft.
inboxPage now takes a function and calls it while building the page after the read.
Two browser cases hold the inbox read: typing during it, and a refused start that
resolves during it, both survive the repaint (both fail on the previous commit).
P3: a hire start passes a bus code through only when the broker raises it before it
records the decision (hire-decisions prepare: the model route codes,
definition-not-hireable, definition-shared, no-chief-of-staff). Every other code,
including revision-conflict-revoked, request-timeout, invalid-envelope,
incomplete-request and codes the resolve or apply steps can raise, stays
outcome-unknown. Messages are worded for hire, fire and change alike.
D4, readiness P0-1 and P1-2.
On an org Console, #/inbox now carries the hire, fire and change form
below "Answered today". It posts to the current organization's bus
through the same decision endpoint and verb (hire.start.console); the
organization field is read-only. Inputs carry focus keys, so a poll
repaint keeps the draft, focus and caret.
A hire start the bus definitely refused now keeps its own code. The
model route codes (model-provider-unavailable and its kin) get a next
step. Any other definite code is named, and the message never claims
that nothing was recorded. A lost or unreadable reply is still
outcome-unknown. The templates, confirmation and resolve steps are
unchanged.
Re-check 3 found connector.start() still quoted the journal directory in
its STOP refusal, and the CLI passes a DiscordError through unchanged.
It now uses journalLabel like the CLI and journal refusals. The connector
test asserts the path is absent: 22/1 on the old source, 23/0 after.
The discord CLI's top-level handler prints a native Node error that is not
already a labelled refusal as 'cannot <syscall> <label> (<CODE>)'. The journal
and approvals readers and writers name the file by label at the source, so
conversation, control-board and webui callers get the label too. The session
directory check moves to engine-pi.mjs as sessionContinues(). Exit codes and
refusal codes are unchanged.
A token file, context file, tool root, data root or setspark key file
that changes between its check and its read failed with a native error
whose message carried the host path. Each read now names the file by
label and code (quietRead): same error object, type and code, so exit
codes, refusal codes and check order are unchanged.
The journal label import pulled binding.mjs and its config readers into
every journal.mjs importer. The queue test repo copies only journal.mjs
and errors.mjs, so its genesis failed with ERR_MODULE_NOT_FOUND (webui
reads.test.mjs red, 4 tests). BINDING_NAME now lives in errors.mjs and
binding.mjs re-exports it, so its export is unchanged.
The board API returns a scan refusal in its JSON error body. The test
starts a board on port 0 over a seen.json that is not an object and
checks the body names seen.json by label, with no sentinel or scratch
path. It fails on BASE, where the body quotes the host path.
Review "changes 8" fix round for org-redact6.
- launcher: a harness module's throw names its system code or class,
never its message; preflight, loader, bundle, checkout, sandbox and
route text is relayed with host paths replaced (relay()).
- claude-code and pi preflights name MOSAIC_CLAUDE_BIN and the
repository's node_modules, never a path; persona and skill bundle
errors and sandboxProblem name their file or the sandbox by label.
- seat session: thread store, legacy store, overlap, busy lock and
newRun refusals name the place under the data root.
- discord: unknown keys, binding names and turn ids are described when
not plain; approvals, journal and repository read errors name the file
and code; git drops stderr lines that carry a host path and a spawn
failure names its code only.
- seat, control-board: registration fields and seen keys are described
when not plain; invalid seat name and layout state the constraint.
- organization: the registry names the config directory and registry
file by label; --project is quoted only when it is a plain name;
systemConfigProblem moves to its own module.
- scripts/mosaic-config.mjs: the config by where it came from, the data
root and its marker by role, keys and arguments only when plain, and
error codes in place of raw messages. Exit codes unchanged.
- webui sso-config: an unknown console key is named only when plain.
Sentinel tests in each package's path-redaction-labels file fail on
BASE; pins that quoted a path now assert the label and its absence.
redact6. A refusal names the field, the file or the instance. It never quotes a
config value, a host path, or a raw e.message or stderr that carries one.
- organization: checkCredentialRef names the field and each forbidden root by
label; OrgError keeps .path only for a document field ($...); the registry,
fence and lock refusals use the quiet helpers (call and code).
- cli: loadSystem never relays mosaic-config stderr: instance refusals keep
their code and names, everything else reads as a field and its constraint
against a labelled config. Project-key, access warning, halt gate, sessions
file, launch socket, harness relays and the workspace rename name labels.
Launch-log reasons read a Node system error as its call and code.
- scripts/mosaic-config: configuration not found names where the config came from.
- discord, seat, control-board: config, token, context, tool-root, journal,
binding, registration and seen-marks refusals name labels.
Exit codes, refusal codes and check order are unchanged. Each new or changed
test fails on BASE be698e602.
A4's hire writes an org:hire-<uuid> definition, so the chief's in-session
launch of its hire now reaches the launcher's held-secret check. The fixture's
op table lacked definitionScan and refused invalid-host-request; process.mjs
answers it.
jason.woltje