jason.woltje
ebfbdb13a0
fix(webui): settings-s5c recheck: the status load says whether it painted the answer, and the result after an off says the list above is read again only then; a status read that answers 200 with null, an empty object or a page that is not JSON now says the list may be out of date, with Read again, instead of claiming the list is new (recheck P3); tests red on c47f9a3bd ( #1873 , lane settings-s5c)
2026-11-20 02:10:52 -06:00
jason.woltje
4d378fc38b
fix(webui): settings-s5c review: an open Turn off question goes when a status read no longer lists that program or cannot list programs, so the buttons are not left disabled (P3-1); a refusal code named like an object property (constructor) shows as its code with the plain refused words, in failText and in the shared explain(), never as page source (P3-2); after an off the result says the list above was read again only when that read worked; when it failed it says the list may be out of date and gives Read again, which reads it and moves focus to the result (P3-3); invalid-request on an off says the program is not in the Console's installed list or that list could not be read (P3-4); the programs box keeps its own spacing inside the settings form (P3-5); tests red without each change ( #1873 , lane settings-s5c)
2026-11-20 02:10:52 -06:00
jason.woltje
ab8633ede8
feat(webui): settings-s5c: Model setup, Advanced, lists the installed programs from the status read and which organizations have each one on, by display name, an organization whose list is null reading Not known in it, never off; Turn off for every organization asks first, naming the program, then POSTs programs/off, words each organization's outcome (bus-down never says stopped, failed:outcome-unknown says it may have changed, an unknown failed code shows the code unless it is shaped like a key), gives busy and a failed request a plain line, reads the status again and moves focus to the result; Technical details reads access health per organization when it opens: Ready only for ok with every key active and no reason, attention, unreadable, a missing or unknown health never Ready, no key id, agent or other count shown, a failed read with Read again; none of it shows or is read for a viewer who is not the instance owner; the old per-instance program read on Advanced is gone ( #1873 , lane settings-s5c)
2026-11-20 02:10:52 -06:00
jason.woltje
6ad11e6993
fix(pi): pi-unpin S3 re-check 10: unshare's outer layer is best effort: each fit check probes it once, alone and then with bwrap inside, and runs without it when unshare is missing, older than util-linux 2.36 or refused (Ubuntu 24.04 with apparmor_restrict_unprivileged_userns=1), with bwrap's argv the same either way and no refusal; only a failed bwrap or a missing setpriv refuses, each named; the sweep stops processes of this uid whose command line names a stale scratch dir before it removes it, scratch names carry the pid namespace and a sweep skips other namespaces' dirs, and a run or probe the check kills is swept at once; test 655 waits for pi.ready() before its fixture starts the launcher ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
e52a6b714f
fix(pi): pi-unpin S3 re-check 9: a fit check dies with the process that runs it: its command line runs under setpriv's parent-death signal and a shell that checks its parent is still that process, then unshare puts bwrap as pid 1 of a fresh pid namespace with --kill-child, so a process bwrap leaves in its setup dies with the namespace, and bwrap gets --die-with-parent; each run's scratch directory carries its process's pid and start time and a check first removes those a process no longer running left; the fit route is zai glm-5.3-flash, with a test that goes red on a Claude model or Anthropic provider; the launcher's warm-up records a harness plugin it can't load once, by code only; test 655 waits for pi's ready() before its timed part, with its own timeout raised ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
2d065b936e
fix(pi): pi-unpin S3 re-check 8: the launcher starts pi's fit check in the background when it starts, through one harness load helper a launch shares, so the first launch joins the check in flight; nothing waits on it, a failed warm-up is dropped with no cached verdict and no unhandled rejection; a fit check that throws refuses as harness-feature-missing with no path in its line; tests for the launcher's rejected preflight and the Triage host's wait on ready(); the fit's provider and model move to the pi module's session-env.mjs ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
098b3771c0
fix(pi): pi-unpin S3 re-check 7: the fit check runs its pi processes with async spawn, four at a time, and every caller awaits it, so the bus's event loop stays live (longest gap 22 ms against 6031 ms before) and two launches during one check share it; the launcher's call() awaits a module's promise and refuses its rejection as a throw, and preflight and version are awaited; the Triage host and route await the module's ready(); a run whose pipes outlive it settles a second after it exits or is killed; the fit's host env is the process's own through sessionEnv minus provider keys, its names are in the cache key, parity runs over a login shell's host and a unit's, and stand-ins that leak with TERM, TZ or LC_ALL unset are refused; bundle tests await harnessReady() ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
eac42663ba
fix(pi): pi-unpin S3 re-check 6: the fit runs get a bus session's environment, built by the launcher's sessionEnv over ENV_ALLOW, the sandbox's sessionSetenv and the runner's adapterEnv with the pi module's harnessEnv (now in session-env.mjs), so no run sets PI_CODING_AGENT_DIR and the agent sources sit at $HOME/.pi/agent; a test fails when the fit env and a bus session's env differ by a name outside one listed exception; the drift test runs the adapter in that env over 98 argv sets, each tool count, -c case, thinking level and provider, and checks every variable the adapter reads; -c over a session dir with nothing for the project is named under Not run, with a gap test ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
b41bc00b26
fix(pi): pi-unpin S3 re-check 5: five -p runs in a bus session's shape pass every pair of the adapter's session branches (tool list or --no-tools, -c over a planted session, --thinking, --mode json), a -c run must resume the planted session, each loads two -e, the -e extension's command list shows skills and prompt templates in -p, the drift test drives the adapter through all sixteen branch sets and fails on a pair no run passes, and a test holds the --no-mcp run on its own ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
749d6d98f5
fix(pi): pi-unpin S3 re-check 4: one sealed run in a bus session's shape, built by sessionShape, which a test holds to the adapter's argv; a one-out run must show only its own kind; the README and header list what a session passes that no fit run does ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
fa5ce3ae65
fix(pi): pi-unpin S3 re-check 3: the control passes --no-tools and --no-themes, one sealed run per loader flag leaves only that flag out and its kind must show, every run gets a fresh scratch directory, and the README says what argv the check runs ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
d009ccaec4
fix(pi): pi-unpin S3 re-check 2: the control passes the sealed runs' -e and --system-prompt so the runs differ only by the seal flags, a project source no longer shows a kind, a run over 4 MB says so, and --version gets 3 s ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
2613fb1c4c
fix(pi): pi-unpin S3 re-check: the control counts a kind only through a source the sealed runs can show, so a SYSTEM.md no longer stands in for the project APPEND_SYSTEM.md or an AGENTS.md ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
df26085303
fix(pi): pi-unpin S3 review: the control must show each planted kind and answer get_commands, the -e extension reads the system prompt so context and trusted project files are checked, settings and package sources are planted, help flags come from the option column, missing -e and the seal run in -p too, and the digest covers npm's lock files ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
7c1b87d154
fix(pi): pi-unpin S2 review: a found pi must be the bin its package's package.json names, and the fixtures name it ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
8908df113e
feat(pi): pi-unpin S3: every start runs a sandboxed, offline fit check on the pi it found and refuses harness-feature-missing when a flag is missing, a missing -e starts, or a planted source loads with the seal flags on ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
b8354e4304
test(pi): pi-unpin S2 follow-up: the adapter tests point MOSAIC_PI_BIN at their stand-in, and the sandbox test reads the new mount label ( #1873 )
2026-11-20 01:17:33 -06:00
jason.woltje
f62b1b9518
feat(pi): pi-unpin S2: the session runs the pi the module finds: MOSAIC_PI_BIN, else PATH, else the repository's copy, mounted by its package directory ( #1873 )
...
binary.mjs locate() takes MOSAIC_PI_BIN (absolute and executable), else the
first pi on PATH past the repository's node_modules/.bin, else the
repository's copy. The binary must belong to the pi package. mounts() and
installRoots() hold that package directory; the repository's copy keeps the
whole node_modules mount, since its packages are hoisted beside pi. env()
sets MOSAIC_PI_BIN to the binary's path inside the session, and the adapter
and the model-stream branch run it. sessionEnv passes MOSAIC_PI_BIN, and
Triage's SPAWN_PATH_ALLOW takes it with every host check kept.
harness-binary-missing keeps its code; with no pi its message is "no pi
found: set MOSAIC_PI_BIN, put pi on PATH, or run npm ci". A refusal names
the variable, never a host path.
2026-11-20 01:17:33 -06:00
jason.woltje
7355b233a8
feat(pi): pi-unpin S1: pi's labels come from the binary the module finds, not a pin ( #1873 )
...
version() runs `<bin> --version` with a 5 s timeout and a PATH that finds node, and returns
null when that fails or prints something other than one short printable line. The compaction
count records the found package's own package.json version, else null. Adapter and module
comments say "read from 0.85.1" instead of "pinned". The lookup still honours only the
repository's copy; S2 widens it.
2026-11-20 01:17:32 -06:00
jason.woltje
88d08c8437
fix(model-proxy,webui): settings-backend-a2 review: turning a program off counts the root agents each organization takes (not excluded, not the root assistant, as materializeCopies copies them), so a program only a root agent uses stays on (in-use), and a root agent file that can't be read, or no root reader, writes nothing where the program is on (unreadable); the Console passes loadRootAgents and the root file is read once per call (P1-1); tests for a revision that is not 64 hex, routes from another revision, routes with no instances and a lock-pinned harness listed as installed (P3-1); the busy test no longer hangs when the name check is gone (P3-2); an organization's harness list with anything but plugin names reads on: null (P3-3) ( #1873 , lane settings-backend-a2)
2026-11-20 00:01:05 -06:00
jason.woltje
4377941bd4
feat(model-proxy,webui): settings-backend A2: the proxy status lists the harness programs installed on this instance (from the plugin tree) and which ones each organization has on, with no organization needed; POST /api/proxy/admin/programs/off { name } turns one program off in every current organization through plugins.set after a fresh read, skipping an organization where a role route, a fallback or a project agent in its file uses it (in-use) or where it is the last one (last-program), writing nothing for an organization that is down or unreadable, reporting a revision change as failed:revision-conflict without retrying, one call at a time (proxy-admin-busy), with one receipt of name and outcome ids; GET /api/proxy/admin/access gives each organization a health and its stack-managed key ids from proxy.keys, never a key, never the usage queue, and a proxy-uncertain answer reads attention; both routes are the instance owner's only; the Console's riders carry the organization file for the in-use check ( #1873 , lane settings-backend-a2)
2026-11-20 00:01:05 -06:00
jason.woltje
de39750ebb
fix(webui): settings-s5b recheck: after an empty history page, folding the list keeps Show older, since the line still names it (N1); a test holds that a successful Read again moves focus to Show older (N2); tests red on 3b17326b7 ( #1873 , lane settings-s5b)
2026-11-19 23:30:29 -06:00
jason.woltje
3b17326b74
fix(webui): settings-s5b review: Show older shows whenever there is an older page and nothing read is folded away, and what it reads stays open; Show all only when entries are folded (P2-1); an older page not further back than the one asked for is outcome unknown (P3-1); when the pressed history button goes, focus lands on Read again, Show older, Show fewer, then the heading (P3-2); a service that is not installed has no lines, said plainly, not as a failed read (P3-3); an unknown history action reads Other setup action, even one named like an object property (P3-4); a hidden user reads "someone whose name Mosaic hid" (P3-5); a test holds a stale history answer (P3-6); the service key is the last row of the state list and fails in the same banner style with Read again (P3-7); the setup-stops test now refuses a real unit start; tests red on d03ae494e ( #1873 , lane settings-s5b)
2026-11-19 23:17:08 -06:00
jason.woltje
d03ae494e8
fix(webui): settings-s5b: in Technical details the service key and the history sit right after Release and Service, as models-advanced shows them, with the service's last lines after the history; history entries are not numbered ( #1873 , lane settings-s5b)
2026-11-19 22:59:03 -06:00
jason.woltje
e1b56d9ea7
feat(webui): settings-s5b: Model setup's Technical details shows when the service key was made (GET /api/proxy/admin/service-key, never the key, with renewal not built yet), the setup history a page at a time (GET /api/proxy/admin/history, withheld rows plain, an empty page with a next page still offers Show older) and the service's last lines (GET /api/proxy/admin/log, as the answer gives them); a failed step 1 opens the lines; each read waits until its box opens, a failed read says so with Read again, and none of it is read or shown for a non-owner; the raw receipts list is gone; leaving the Models page for any page drops its focus request; tests red on e6f6f5445 ( #1873 , lane settings-s5b)
2026-11-19 22:53:50 -06:00
jason.woltje
e6f6f5445b
fix(webui): settings-s5 recheck: coming back to an organization's Models page reads the model service again, so the not set up line goes once the owner has set it up (N1); a switch left while it writes no longer moves focus to its outcome line on the next visit, and a render that paints no outcome line drops the focus request (N2); tests red on da123f6dd ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
55f9652f6a
fix(webui): settings-s5 review P2-1: while an organization needs a restart its Models page leaves out Stop using your models, as the org-models-restart mockup does, since buttons here have no disabled look; the shots add the model service not set up state ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
9e434c0e9c
fix(webui): settings-s5 review: on an organization's Models page Stop using your models waits while the organization needs a restart (P2-1); the header says the models come from your accounts only when the plugins read says the organization uses them, and from its own organization file when not (P2-2); a choice not in force says when the model service isn't set up or isn't answering, with a link to Model setup, from the owner's status read (P2-3); after a switch focus moves to the outcome line (P2-4); Use your models shows Saving while its write is out (P3-1); a failed read before the write says "Not changed. Nothing was written." with Read again (P3-2); a Console with no organizations says "this business" mid-sentence (P3-3); the choice sits in the form column at 1440 (P3-4); tests red on e4bb2be14 ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
e732ae7450
test(webui): settings-s5: shots of Acme Studio's models (not using your models, after Use your models, needs a restart), the account reasons, step 3 can't start, Technical details and Messages at 390 and 1440, light and dark, measured for sideways scroll and focus rings; "No accounts yet." on Model setup reads as one line instead of squeezing into the name column, with a test red without the shell.css rule ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
66255c9bf2
feat(webui): settings-s5: an organization's Models page offers its one choice, "Where <Org> gets its models": Use your models (the cliproxy model-provider module, written through plugins.set after a fresh read, refused when the page is stale or a route draft is open) or Use its own model service, dashed, disabled and badged Coming later; the page says from the plugins read which one is in force and what a switch changes, Stop using your models is the way back, a refusal keeps the read's choice, a failed read offers Read again, and while the organization needs a restart its banner's Restart is the one primary and the choice waits; the sidebar marks read the status again after a switch; tests for slice 5 and the slice 4 items, red on 524132b42 except the no-Details control case ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
cecc901854
fix(webui): settings-s5: a failed turn in Messages whose body carries its own "\nDetails: " part shows its cause and "Details:" once, split on the first "\nDetails: " as chat.js does; #/settings/members and #/orgs/<id>/settings/members land on that organization's Agents page at #/settings/agents?org=<id> ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
81ca8399a2
fix(webui): settings-s5: Model setup names each organization by its display name in the Move confirm, its result, the not-moved line and the skipped lines, and a stand-in organization's line says "your models" in step 3's words; before the first account step 3 names an organization the sidebar marks "can't start", with a Can't start badge, and stays closed; Technical details and Advanced show the timeouts init chose (firstOutputSeconds, rotateGraceMinutes, "the default" when proxy.json leaves them unset) from the status read; MosaicModelDots gains read() so another page can ask the marks to read the status again ( #1873 , lane settings-s5)
2026-11-19 21:48:50 -06:00
jason.woltje
37c3854849
fix(model-proxy): settings-backend A1 review P3-1 and P3-3: a short Mosaic key glued to a word (xmso-..., _msk-...) is redacted by one added line after the copied key-prefix line, which the pin test now expects; a history entry whose redacted values, or keys and values, read together still hold an environment secret split across them is answered as { withheld: true }; comments name the split-key journal limit (P3-2) and the unmarked non-object answer (P3-9) ( #1873 , lane settings-backend-a1)
2026-11-19 21:09:58 -06:00
jason.woltje
db2dc96aa2
feat(model-proxy): settings-backend A1: three instance-owner reads under /api/proxy/admin/ for Model setup: the model service's last log lines with keys and secrets removed (log), the service key's made-at time from proxy.json's mtime with no renewal yet (service-key), and setup history a page at a time (history); account writes through /api/proxy/* and an organization's proxy routes now join that history by label only; redaction is chat-fail's list with the mso-, mst- and msp- prefixes added, pinned to failure-notice.mjs ( #1873 , lane settings-backend-a1)
2026-11-19 21:09:58 -06:00
jason.woltje
f666590d54
fix(proxy-scope): slice 4 review round 1: a save runs ensure only when it creates the route, so after Turn Triage off only Repair access brings a key back; the key walk stops at a bus whose outcome is unknown and the whole walk has one 30 s deadline; the status reads the same riding list the walk asks; a repeated sweep refusal is logged when it appears or changes and then once an hour; Off asks first and each key action has its own plain line; the host send-path test asserts the stop before it waits ( #1873 , lane proxy-scope-s4)
2026-11-19 20:41:55 -06:00
jason.woltje
2f20346719
feat(proxy-scope): slice 4: the bus issues, rotates and retires the Triage key through proxy.triage.key (op ensure or revoke), for the instance owner's path-bound proof only; a riding bus sweeps a due rotation or retirement under the instance proxy lock, re-reads the file, never issues the first key and does the work once across buses; the Console asks one riding organization's bus on the first save, Repair access and Off, shows triage-no-riding-bus and rotation overdue, and stops a session at its key's retireAt with triage-key-rotated; answers, events and receipts carry key ids only ( #1873 , lane proxy-scope-s4)
2026-11-19 20:41:55 -06:00
jason.woltje
524132b42b
test(webui): settings-s4 review F1: each organization pick waits for the picker and changes it in one step, since a route change repaints the select; the final gate caught the select missing for a moment between a wait and the pick; the test still fails with the bus.js and display.js of e717824c5 ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
ae53b1988a
feat(webui): settings-s4: an account row on Model setup shows why the account is not working, from the accounts read's reason field (chat-fail F3, a7362a8fc and later), as text beside its state; with no reason field, or an empty one, nothing shows; the test is red with the display.js of 12e99db49 ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
940ac53b65
test(webui): settings-s4 review: the picker from Model setup, Appearance and Organizations lands on #/settings/routing?org= (F1); the can't start mark and the step 3 words and Ride all line agree (F2); no paused mark with only a fence to clear (N8); every control under Advanced shows a focus ring before setup, and the fixture service reads healthy (N9); F1, F2 and N8 fail with the display.js and bus.js of e717824c5 ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
799df9cb9f
fix(webui): settings-s4 review F2 and N8: an organization the sidebar marks "can't start" (stand-in models, bus stopped) is named on Model setup step 3 by its display name in the same words, with the fix (move it to your models, then start its bus), and its Ride all line and Move button use the display name; the paused mark needs the service itself down (not running or not listening), so a fence left to clear no longer marks organizations paused ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
23964b1224
fix(webui): settings-s4 review F1: the organization picker on a page that is not an organization's (Model setup, Appearance, Organizations) opens that organization's Routing page at #/settings/routing?org=<id>, so the address base no longer changes to #/orgs/<id>/ ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
d692ca9b81
fix(webui): settings-s4 review F3: Model setup drops what design section 10 removes: "Use my own key" and its key fields (the service key is always made on this machine, so init always sends generate), the key rotation grace field and its settings row, the Client keys table with its refresh button and the keys read, and the "Accounts and client keys loaded" line; the setup cleanup no longer clears the removed key fields; the Advanced help says Claude Code, not "the Claude harness" (N5); the tests that pinned the removed parts read the new page ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
57e86d9867
test(webui): settings-s4: tests that pinned the old addresses read the slice 4 ones: the dashboard's Model setup row and Triage's fix link open #/settings/model-setup, and the single-pane switch tests go to #/settings/<page>?org=beta (their #/orgs/acme/... starts still pass through the old-address redirect) ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
d502a75e57
test(webui): settings-s4: the Business settings test reads the slice 4 nav (You, Your models, This instance, This business with Business last) in place of the old Your browser and This instance list; Business is still in Settings and not in the sidebar, and still visible in the phone disclosure ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
15801ccb07
fix(webui): settings-s4: Model setup shows one primary button: a submit there reads as a plain button unless display.js marks it primary, so Finish sign-in and Check and add no longer look primary beside the card's own; the sign-in row wraps with a gap at 390; the test counts primaries by their drawn fill, and checks one primary while signing in and with the key form open ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
50ca7f0341
fix(webui): settings-s4 shots round: a progress line reads what happened at each step (done, under way, not started, or "did not finish" where the run stopped), so a failed step no longer reads "Starting the service…"; an account's health badge keeps its own width on a phone; the model search box has a placeholder; the slice 4 test file takes shots at 390 and 1440, light and dark, with MOSAIC_UX_SHOTS set, and checks sideways scroll, select fit and a visible focus ring on every control it tabs to ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
b9b3e56821
test(webui): settings-s4: nav groups, the picker and ?org= pages, the old addresses, the phone section button with no sideways scroll, the three sidebar marks, the one-press chain in order, a failed step with Try again and last lines, ?step=, account rows and the provider-picked add form with sign-in cancel and paste-back, Models offered read-only with search, and the done line with a removed organization; all 11 fail on 6c5ec23b4 ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
32b56b8351
feat(webui): settings-s4 sidebar marks: an organization whose models need a restart reads "needs restart" (◐), one on stand-in models whose bus can't start reads "can't start" (▲), and one riding a model service that is set up but not running reads "paused" (◐); restart and paused show only on a running bus; the dashboard's Model setup card links #/settings/model-setup; an organization's Settings page marks it in the sidebar ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
78d1ef7705
feat(webui): settings-s4 Model setup: four step cards (Model service, Accounts and models, Organizations, Triage) with at most one primary button on the page; one press runs download, set up, install and start in order, each step once, reading the status after each, with a progress list; a step that fails stops with Try again and opens "The service's last lines"; done cards fold to their line, ?step=<card> opens one; accounts as rows with kind and a health badge, a provider select that offers "Sign in to <provider>" or "Check and add" for an API key, a cancellable sign-in with the paste-back form, and "Removing an account is not built yet."; Models offered read-only per provider with a count, a search box past eight and "Coming later"; Advanced and Technical details folded; the Ride all done line does not count an organization that turned the model service off; MosaicModelDots reads the setup status for the sidebar marks ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00
jason.woltje
af1bbf7859
feat(webui): settings-s4 nav and addresses: Settings nav in four groups (You; Your models with Model setup and, for the instance owner, Triage; All organizations; This organization with an organization picker above Models, Agents, Launch limits, Token use, Assistant and Organization file); an organization's pages live at #/settings/<page>?org=<id> and the old #/orgs/<id>/settings/<page> form lands there; #/settings/model-proxy opens Model setup at #/settings/model-setup; the phone section button reads "<Org> · <Page>"; the breadcrumb names the organization on its Settings pages; no Members row ( #1873 , lane settings-s4)
2026-11-19 18:49:24 -06:00