fix(hygiene): unbreak format:check — it was RED on main and inert in CI

Two independent defects, both found by running the gate honestly instead of
bypassing it:

1. packages/mosaic/framework/tools/orchestrator/README.md fails the repo's own
   prettier config (unaligned markdown table). It landed via MERGED PR #868
   (b79336a8). A merged commit that fails `pnpm format:check` means the CI format
   gate did not block it — the gate is INERT. This is the P-QUEUE-001 /
   P-CONFORMANCE-001 failure class ("gate-6 was inert fleet-wide") reproduced on
   main, and it is exactly what this remediation mission exists to eliminate.

2. .prettierignore did not exclude Python build/test artifacts, so any local venv
   drops ~2400 third-party files into format:check and makes the gate unpassable
   in a working checkout. Added **/venv, **/__pycache__, **/.mypy_cache,
   **/.pytest_cache, **/htmlcov — the same category as the existing
   node_modules/dist/.next entries. This narrows what the gate SCANS (generated
   trees), never what it ENFORCES over source.

Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>

.prettierignore

@@ -4,6 +4,14 @@ pnpm-lock.yaml
 **/node_modules
 **/drizzle
 **/.next
+# Python build/test artifacts — same category as node_modules/dist/.next above.
+# Prettier must never scan generated trees; without these a local venv poisons
+# `pnpm format:check` with thousands of third-party files.
+**/venv
+**/__pycache__
+**/.mypy_cache
+**/.pytest_cache
+**/htmlcov
 .claude/
 docs/tess/TASKS.md
 docs/scratchpads/

docs/remediation/BOARD.md

@@ -0,0 +1,76 @@
+# mos-remediation — LIVE BOARD (keep < 8 KB)
+
+**Phase:** PLANNING — adversarial task decomposition IN FLIGHT.
+**Updated:** 2026-07-31 (mos-remediation orchestrator; seat active on `mosaic-fleet`).
+
+## Head
+
+- Mission charter + 15 decisions + 4-build plan: PERSISTED (`docs/remediation/MISSION.md`).
+- HOLD lifted for this workstream (Jason 2026-07-31). Nothing implemented yet — planning first.
+- Orchestrator seat `mos-remediation` is LIVE and owns the mission. Residency attestation: PASS.
+- TASK-0 (env + push mission package) IN PROGRESS — checkout deps repaired, gates being verified honestly.
+- TASK-1 (adversarial decomp) DISPATCHED for real, both planners on GUARANTEED-CLEAN context.
+
+## In-flight
+
+| Task                                                 | Owner           | State                                         |
+| ---------------------------------------------------- | --------------- | --------------------------------------------- |
+| TASK-0 env repair + push `remediation/mission-setup` | mos-remediation | IN PROGRESS — deps installed; gates verifying |
+| Decomp (robustness side) → `DECOMP-OPUS.md`          | planner-opus    | WORKING (clean session)                       |
+| Decomp (pragmatic side) → `DECOMP-SOL.md`            | planner-sol     | WORKING (reset to 0.0% ctx before dispatch)   |
+| Reconcile both decomps → `docs/remediation/TASKS.md` | mos-remediation | BLOCKED on the two decomps                    |
+
+## Fleet seats
+
+- mos-remediation — project orchestrator (Claude, /src/mosaic-stack, socket `mosaic-fleet`) — ACTIVE
+- planner-opus — adversarial planner (robustness), Opus 5, socket `default` — WORKING
+- planner-sol — adversarial planner (pragmatic), gpt-5.6-sol, socket `default` — WORKING
+- rev-974 — mosaicstack reviewer identity (id 16, write:repository) — idle, on call
+- Mos (mos-claude) — lead coordinator, socket `default` — relay path to Jason
+
+## Gate status
+
+- Delivery gates active: author≠reviewer, diff-blind pre-registered checks, CI-green, merged-PR completion.
+- Freeze: LIFTED for this workstream only.
+- Git identity: `MOSAIC_GIT_IDENTITY=mos-dt-0` INTERIM. Mos ruled gate-16 HOLDS (author≠reviewer is what
+  gate-16 protects; rev-974 reviews, mos-dt-0 never self-reviews). Dedicated identity TRACKED, Mos provisions.
+- Remote control: native `/remote-control` NOT wired in this runtime. Path is **Mos-relay**
+  (Jason ↔ mos-claude via Discord ↔ mos-remediation via agent-send). Not a blocker.
+
+## Sequencing (from MISSION.md)
+
+1. Spine + choke-point service (MACP wiring @ mosaic_orchestrator.py::run_single_task) + PG/Redis
+2. Rotation daemon (finish Mission Control Plane, reuse packages/coord)
+3. Comms service (envelope→service→PG/Redis→adapters)
+4. Hygiene + conformance harness
+   Cross-cutting retirements: flat-file tracking, 3 MACP islands, silent MOSAIC BYPASS.
+
+## Dogfood evidence captured this session (live failure classes, not hypotheticals)
+
+- **D-1 / P-ACTIVATION + hygiene — committed `.npmrc` hard-pins `store-dir=/root/.local/share/pnpm/store`.**
+  Correct for the CI container (runs as root), fatal for EVERY non-root local checkout: `EACCES` on
+  `/root/.local/share/pnpm/store/v10/server/server.json`. A committed config that only works on one
+  runtime is exactly the activation-skew class. Fix candidate: make store-dir env-overridable, not hardcoded.
+- **D-2 / hygiene — husky `prepare` fails `EPERM` copying into root-owned `.husky/_/`.** Repo working
+  tree has root-owned dirs (`.husky/`, repo root) under a non-root agent. Worked around with the
+  intended `HUSKY=0` escape hatch (does NOT disable the existing pre-commit/pre-push hooks).
+- **D-3 / P-FLEET-001 — the seats running this mission are UNMANAGED.** `mos-remediation`, `rev-974`,
+  `planner-opus`, `planner-sol` appear in NO roster (`~/.config/mosaic/fleet/roster.yaml`, `agents/`).
+  Planners run on socket `default`; the roster declares `mosaic-fleet`. This is the exact
+  "one roster-owned socket/host + quarantine unmanaged + stale GC" failure P-FLEET-001 indicts —
+  observed on the remediation mission's own fleet. Prerequisite for INBOX identity-addressing.
+- **D-4 / P-LIFECYCLE + hygiene — a dispatched agent silently IGNORED an in-message context reset.**
+  planner-sol was at 64.3%/372k; the brief asked it to reset first; it began work on dirty context anyway.
+  Only an out-of-band `/new` driven by the orchestrator guaranteed clean state. Confirms the postmortem
+  thesis: **instructions are not enforcement.** Reset must be a mechanical pre-dispatch step, not a request.
+
+## Decisions log
+
+- 2026-07-31 — Mission set up by Mos post-postmortem (15/15 decided). Dogfood posture active.
+- 2026-07-31 — Mos: stale `.mosaic/orchestrator/mission.json` is RESIDUE of the disabled Python
+  orchestrator rail that this plan RETIRES. Do NOT invest in it; do NOT build on that rail. The 0/0
+  milestone banner is cosmetic. (Supersedes any plan to repair it.)
+- 2026-07-31 — Mos: planners must be dispatched with GUARANTEED clean context, not requested-clean.
+  Prior default-socket planner sessions predate this mission; dirty context is the indicted hygiene.
+- 2026-07-31 — mos-remediation: worker briefs forbid all git ops and restrict each worker to a single
+  named output file, so two planners can share one checkout without a branch race (M2-era incident doctrine).

docs/remediation/KICKSTART.md

@@ -0,0 +1,44 @@
+# mos-remediation — Orchestrator Kickstart / Compaction-Survival Resume
+
+**You are `mos-remediation`, the project orchestrator for the Mosaic Stack remediation, launched in `/src/mosaic-stack`.**
+This file is your fail-closed resume procedure. Read it on EVERY fresh/cleared session and on the FIRST turn
+after any compaction. This mission's whole point is that manual compaction-survival is fragile — so follow this
+mechanically until Build 3 (rotation) makes it automatic.
+
+## On resume (do in order, before any orchestration action)
+
+1. `cd /src/mosaic-stack` and confirm you are on the remediation working branch.
+2. Read `docs/remediation/MISSION.md` — the charter (goal, 4 builds, 15 decisions, sequencing, directives).
+3. Read `docs/remediation/BOARD.md` — the LIVE state: current phase, in-flight tasks, fleet seat assignments,
+   gate status. This is your single source of in-flight truth (kept small).
+4. Read the discussion checkpoint for full rationale if needed:
+   `../jarvis-brain/docs/scratchpads/postmortem/REMEDIATION-DISCUSSION-STATE.md` (or the jarvis-brain repo path).
+5. **Residency attestation (fail-closed):** restate from the reloaded files — (a) the goal in one line, (b) the
+   current build/phase, (c) the BOARD head (in-flight tasks + who owns them). If you cannot, HALT and re-read.
+   Do NOT act on memory alone; a compaction may have dropped context silently.
+
+## Standing invariants (never violate)
+
+- **North star:** deterministic-right-answer → code/gate; LLM only for judgment.
+- **Delivery gates:** author≠reviewer; PRE-REGISTERED diff-blind checks committed before reading the diff;
+  CI terminal-green; completion = merged PR + closed issue. rev-974 = the mosaicstack reviewer identity.
+- **Dogfooding:** every fix validated against its live seed case (MISSION.md lists them).
+- **Tracking → DB** (hard cutover); do NOT re-invest in flat-file tracking. jarvis-brain PDA is off-limits.
+- **Git identity:** export `MOSAIC_GIT_IDENTITY=<your-seat>` so wrappers author correctly and survive respawn.
+
+## After every significant event
+
+Overwrite stale lines in `BOARD.md`, keep it < 8 KB, commit + push. The board IS your checkpoint until the
+DB-backed rotation daemon (Build 3) exists. Persist typed state (phase, tasks, owners, gates) — never the transcript.
+
+## Fleet
+
+- Adversarial planners: `planner-opus` (robustness), `planner-sol` (pragmatic) — dispatch for task decomposition; reconcile their oppositional decomps.
+- Coders/reviewers: dispatch per roster + delivery gates. Comms: `~/.config/mosaic/tools/tmux/agent-send.sh`
+  (`-L <socket> -s <dst> -S <yourhost>:<yourseat> --class <class>`); always pass `-S`.
+- Lead coordinator: Mos (`mos-claude`). Escalate only on the Constitution's escalation triggers.
+
+## Remote control
+
+On first startup, activate remote control for this session (`/remote-control`) so Jason can reach/drive you while
+away. If the command is unavailable in this runtime, report it to Mos and continue — it is not a blocker.

docs/remediation/MACP-WIRING-SCOUT.md

@@ -0,0 +1,98 @@
+# MACP wiring investigation
+
+**Scope:** `/src/mosaic-stack` inspected at HEAD `b79336a8c11e2a4646a47ff8d295a226e0c71404`; read-only. Existing dirty/untracked state was not touched.
+
+## Verdict
+
+**(c) STRANDED.** `packages/macp` is exported, unit-tested, and registered as a CLI command group, but no production dispatch/execution code invokes its credential resolver, gate runner, or event emitter.  
+A separate MACP-named OpenClaw/orchestrator rail exists, but it redefines task/result types and gate/event logic instead of importing `@mosaicstack/macp`; direct `mosaic yolo|claude|codex|opencode|pi` also bypasses it.
+
+## 1. Production call sites vs tests
+
+### Production references to `@mosaicstack/macp`
+
+| Surface                 | Evidence                                                                                                                               | Actual use                                                                                                                                                                |
+| ----------------------- | -------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Unified CLI             | `packages/mosaic/src/cli.ts:8,385`                                                                                                     | Imports and registers `registerMacpCommand`; no task/gate/event execution.                                                                                                |
+| Forge                   | `packages/forge/src/types.ts:1,17,68,79`                                                                                               | **Type-only** imports of `GateEntry` and `TaskResult`. Pipeline calls an injected abstract executor at `packages/forge/src/pipeline-runner.ts:189-190,299-300`, not MACP. |
+| Mosaic package metadata | `packages/mosaic/package.json:36`; `packages/mosaic/src/runtime/update-checker.ts:172`                                                 | Dependency/update inventory only.                                                                                                                                         |
+| Agent                   | No match under production `packages/agent/src/**`                                                                                      | No MACP import/call.                                                                                                                                                      |
+| Coord                   | No match under production `packages/coord/src/**`; dependency list is only `@mosaicstack/types` at `packages/coord/package.json:25-27` | No MACP import/call.                                                                                                                                                      |
+| Plugins                 | No `@mosaicstack/macp` import under `plugins/**`                                                                                       | No package use; the MACP-named plugin is an independent implementation (below).                                                                                           |
+
+**Repository-wide production call-site search result:** excluding `packages/macp/**`, tests, worktrees, and build output, there are **zero** calls to `runGate`, `runGates`, `emitEvent`, `appendEvent`, or `resolveCredentials`.
+
+### `packages/macp` implementation is internally connected only
+
+- Public exports: `packages/macp/src/index.ts:1-48` exports Task/GateEntry/MACPEvent/TaskResult, credential resolution, `runGate(s)`, risk-floor, and event emission.
+- Gate runner calls its own event emitter: `packages/macp/src/gate-runner.ts:187-236`.
+- Event persistence implementation appends NDJSON to a caller-supplied path: `packages/macp/src/event-emitter.ts:11-27`.
+- There is **no exported programmatic `submit` implementation** in `packages/macp/src/index.ts:1-48`; only the CLI placeholder named `submit`.
+
+### Test-only invocations
+
+- Gate runner: `packages/macp/__tests__/gate-runner.test.ts:96-242` invokes `runGate/runGates`.
+- Event ledger: `packages/macp/__tests__/event-emitter.test.ts:46-133` invokes `appendEvent/emitEvent` against temporary `events.ndjson` files.
+- Credential resolver: `packages/macp/__tests__/credential-resolver.test.ts` exercises resolver behavior.
+- CLI tests only verify command registration: `packages/macp/src/cli.spec.ts:37-73`; `packages/mosaic/src/cli-smoke.spec.ts:8` imports registration.
+
+## 2. Gate on the live dispatch path
+
+### Direct Mosaic runtime launch bypasses MACP
+
+- Runtime commands dispatch directly to harness launch: `packages/mosaic/src/commands/launch.ts:730-801`.
+- Claude/Pi go through the lease broker, then spawn the runtime: `packages/mosaic/src/commands/launch.ts:817-843`.
+- Commander wiring sends `mosaic yolo <runtime>` and direct runtime commands to `launchRuntime`: `packages/mosaic/src/commands/launch.ts:1102-1157,1165-1167`.
+- None of those ranges imports/calls `@mosaicstack/macp`, `runGates`, or `emitEvent`.
+
+**Result:** a direct `mosaic yolo`, `mosaic claude/codex/opencode/pi`, or underlying exec does not create a typed MACP Task, run the package gate-runner, or append a package MACPEvent.
+
+### Coord bypasses MACP
+
+- Coord reads/updates `docs/TASKS.md`: `packages/coord/src/runner.ts:6,306-386`; parser/writer is `packages/coord/src/tasks-file.ts:326-377`.
+- Coord launches a child process directly: `packages/coord/src/runner.ts:397-427`.
+- Mission state is its own `.mosaic/orchestrator/mission.json`/`next-task.json`: `packages/coord/src/mission.ts:8-12`; `packages/coord/src/runner.ts:15-16,355-384`.
+
+**Result:** Coord task execution has no MACP Task validation, package gate runner, or event append.
+
+### Forge bypasses MACP execution
+
+- Forge defines its own `ForgeTask` and abstract `TaskExecutor`: `packages/forge/src/types.ts:48-80`.
+- The production CLI injects a **stub executor** that immediately reports completion with empty gates: `packages/forge/src/cli.ts:13-31,167,185`.
+
+**Result:** even `mosaic forge run` does not execute MACP gates or persist MACP events.
+
+### Separate MACP-named rail is not `packages/macp`
+
+- OpenClaw plugin registers an ACP backend named `macp`: `plugins/macp/src/index.ts:1-18,72-102`.
+- It locally redefines `OrchestratorTask`, `TaskResult`, and gate-result shapes instead of importing package types: `plugins/macp/src/macp-runtime.ts:43-77`.
+- It appends directly to `.mosaic/orchestrator/tasks.json`, triggers an external controller, and polls `results/<task>.json`: `plugins/macp/src/macp-runtime.ts:290-329,437-483`.
+- The controller independently implements `append_event`, `emit_event`, shell execution, gate execution, and results: `packages/mosaic/framework/tools/orchestrator-matrix/controller/mosaic_orchestrator.py:29-91,126-276`.
+- Its gate loop runs raw string gates after worker success: `mosaic_orchestrator.py:213-235`; it does not support the package's structured `GateEntry`/AI-review behavior.
+- Current checkout disables this controller: `.mosaic/orchestrator/config.json:2` (`"enabled": false`).
+- Plugin references `tools/macp/dispatcher/pi_runner.ts` at `plugins/macp/src/macp-runtime.ts:85-91`, but `tools/macp/` does not exist in this checkout.
+
+**Result:** there is a parallel, optionally enabled MACP-shaped rail, not package integration. It cannot make `packages/macp` the enforced path.
+
+## 3. Event ledger status
+
+- Package persistence exists only as a library primitive: `packages/macp/src/event-emitter.ts:11-27` appends JSON lines to an arbitrary `eventsPath`.
+- Package event emission is reached only from package `runGates`: `packages/macp/src/gate-runner.ts:204-236`.
+- No production caller invokes package `runGates/emitEvent/appendEvent`; therefore no runtime destination path is configured for the package ledger.
+- Test-only ledgers use temp paths: `packages/macp/__tests__/event-emitter.test.ts:35-133`; gate tests use temp `events.ndjson`: `packages/macp/__tests__/gate-runner.test.ts:171-242`.
+- The separate Python controller writes `.mosaic/orchestrator/events.ndjson`: `mosaic_orchestrator.py:129-133,159-161,219-235`; the Mosaic Framework plugin only **reads** that file for context at `plugins/mosaic-framework/src/index.ts:279-316,430-438`.
+- In this checkout, `.mosaic/orchestrator/events.ndjson` is absent and the controller is disabled (`.mosaic/orchestrator/config.json:2`).
+
+**Conclusion:** `MACPEvent` from `packages/macp` is defined/tested but not emitted or persisted by live production call sites. The similarly shaped Python ledger is a duplicate island.
+
+## 4. Coord link
+
+- `packages/coord` has no `@mosaicstack/macp` dependency/import: `packages/coord/package.json:25-27`; no matches in `packages/coord/src/**`.
+- Coord's task model is Markdown `docs/TASKS.md` plus mission/session JSON: `packages/coord/src/tasks-file.ts:1-10,257-377`; `packages/coord/src/mission.ts:8-12`; `packages/coord/src/runner.ts:306-427`.
+- It does not consume `.mosaic/orchestrator/events.ndjson`, MACP Task, MACPEvent, GateEntry, or TaskResult.
+
+**Conclusion:** Coord and `packages/macp` are disconnected islands.
+
+## Shortest wiring gap
+
+**Single integration point:** replace the duplicated execution/gate/event block in `mosaic_orchestrator.py::run_single_task` (`:126-276`) with one production Node `TaskExecutor` backed by `@mosaicstack/macp` (typed Task validation + `resolveCredentials` + `runGates` + `emitEvent`), and make Coord/Forge/OpenClaw submit through that executor. This queue/controller choke point is where `yolo|acp|exec` worker outcomes can be gated and journaled before completion is recorded.

docs/remediation/MISSION.md

@@ -0,0 +1,79 @@
+# Mosaic Stack Remediation — Mission Charter
+
+**Owner:** project orchestrator `mos-remediation` (Claude, launched in `/src/mosaic-stack`).
+**Origin:** 2026-07-16..31 fleet lifecycle postmortem. **Status:** PLANNING (task decomposition).
+**HOLD lifted** for this workstream by Jason, 2026-07-31 — "begin full mosaic fleet operation on this."
+
+## Goal
+
+Convert the 15 accepted postmortem remediation proposals into a working, **dogfooded** implementation.
+**North star:** anything with a deterministic right answer moves OUT of the LLM into a deterministic
+gate/program; the LLM handles only genuine judgment.
+
+## Decision record (authoritative, immutable)
+
+- **15/15 proposals decided: 13 accept, 2 modify (P-AUTHORITY-001, P-INBOX-001), 0 reject.**
+- Site + `annotations.json`: `jarvis-brain/docs/postmortem-spec/site/` (committed, origin/main).
+- Discussion checkpoint (rich rationale per proposal): `jarvis-brain/docs/scratchpads/postmortem/REMEDIATION-DISCUSSION-STATE.md`.
+- Postmortem report: mosaicstack/stack PR #107 (merged 88f4ee04).
+- MACP wiring scout (verdict c=STRANDED): `/tmp/macp-wiring-investigation.md` (copy into this dir — see TODO).
+
+## The plan — 15 proposals collapse to 4 builds + hygiene
+
+| Build                                                        | Absorbs                                 | What it is                                                                                                                                                                                                                                        |
+| ------------------------------------------------------------ | --------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| **1. One choke-point service** (mechanical enforcer)         | MISSION, STATE, AUDIT, WRAPPER, QUEUE   | Deterministic program every task/data mutation flows through. **Wire the stranded `@mosaicstack/macp`** in at `mosaic_orchestrator.py::run_single_task` — typed tasks, gate-runner, event ledger, credential binding, tri-state write outcomes.   |
+| **2. One durable spine + hot path**                          | (storage under everything)              | **PG system-of-record + Redis hot queue** (transactional-outbox). Mission/tasks/state-claims/audit-ledger/comms-inbox all land here.                                                                                                              |
+| **3. Rotation lifecycle** (finish the Mission Control Plane) | LIFECYCLE, CONTRACT, GUIDE, RECOVERY    | Coordinator daemon: contract-hash binding, compaction-detected → rotate-not-compact, checkpoint→fresh-session→rehydrate, broker-independent recovery. Deterministic, not an LLM. Reuse `packages/coord`; existing PRD at `docs/mission-control/`. |
+| **4. Comms service**                                         | AUTHORITY, INBOX (+ versioning roadmap) | Envelope (comms/v1) → sole-path service → PG/Redis → pluggable adapters (tmux→Matrix/Discord/Slack/Telegram). Version the protocol, not participants.                                                                                             |
+| **+ Hygiene & proof**                                        | FLEET, WORKFLOW, CONFORMANCE            | One roster-owned socket/host + stale GC; allowlist auto-sync; the conformance harness that fault-injects the failure classes and proves builds 1–4 hold.                                                                                          |
+
+## The finding that sets the cost
+
+**Built-but-unwired disease.** `@mosaicstack/macp` is stranded (nothing calls it); `packages/coord` primitives
+exist; the Mission Control PRD exists; PG + Redis already run in-stack. Three duplicate MACP islands, an
+orphaned context loader, a fail-open bypass. **Work = wire + consolidate + retire, NOT greenfield. "Finish, don't re-spec."**
+
+## Sequencing (skeleton — adversarial decomposition refines this)
+
+1. **Spine + choke-point service** (builds 1+2) — foundation; unlocks MISSION/STATE/AUDIT/WRAPPER/QUEUE at one integration point.
+2. **Rotation daemon** (build 3) on that spine — the drift fix proper.
+3. **Comms service** (build 4) — envelope → service → PG/Redis → adapters; retire direct-tmux.
+4. **Hygiene + conformance** (build 5) — fleet convergence, allowlist sync, dogfood harness.
+
+- **Cross-cutting retirements:** flat-file orchestration tracking (hard cutover to DB), the 3 duplicate MACP islands, the silent `MOSAIC BYPASS`.
+
+## Standing directives (Jason, 2026-07-31)
+
+- **Dogfooding:** validate EACH fix against the live fleet failure that motivated it. Seed acceptance tests:
+  Pi brick (RECOVERY), scout-bounce (INBOX/FLEET), gate-6 inert + #1019 recursion (QUEUE), identity drift
+  (WRAPPER), auto-sync sweep (WORKFLOW), #1018 stale-consumed (INBOX). The fleet is its own test bed.
+- **Orchestration tracking → DB**, hard cutover ("rip off the bandaid"), NO flat-file interim. jarvis-brain
+  PDA flat-files untouched. Current flat-file tracking runs as-is/unhardened until DB tracking is real, then one clean replace.
+
+## The 15 decisions (one-line; full rationale in the checkpoint)
+
+1. **P-ACTIVATION-001** accept — transactional CLI+hooks+broker+version release; block launch on skew, fail-SAFE.
+2. **P-AUTHORITY-001** MODIFY — structured authenticated inbox; envelope carries comms-PROTOCOL version; version the protocol not participants; N-version window.
+3. **P-LIFECYCLE-001** accept — rotation not recursive compaction; pre-empt at token threshold; enforcer = deterministic coordinator; = finish Mission Control Plane.
+4. **P-MISSION-001** accept — bind lanes to mission+task ledger; convention exists, ENFORCEMENT is the gap; mission+tasks → DB spine (hard cutover).
+5. **P-QUEUE-001** accept — repair queue transport + exit-asserting non-null-case tests (gate-6 was INERT fleet-wide; #1019 fix recursed the same bug).
+6. **P-STATE-001** accept — typed claims (source/confidence/TTL) not prose blob; MACP typed record; integrity fail-closed HMAC; don't fork a 4th island.
+7. **P-AUDIT-001** accept — MACPEvent lifecycle ledger; EXTEND enum to lifecycle events; runtime-neutral (executor-emitted); retire duplicate Python ledger.
+8. **P-WRAPPER-001** accept — identity derives from seat name + survives respawn; tri-state write outcomes MANDATORY; name safe target metadata.
+9. **P-CONTRACT-001** accept — bind session to contract hash; re-anchor on policy-change OR compaction-detected; stale generation loses authority MECHANICALLY.
+10. **P-INBOX-001** MODIFY — sole-path comms SERVICE; PG durable SoR + Redis hot queue (outbox, reconciliation sweeper); pluggable adapters; protocol-first, PG-first-then-Redis.
+11. **P-RECOVERY-001** accept — broker-independent bootstrap recovery; honest capability labeling; break-glass LOUD+AUDITED+TEMPORARY not silent permanent bypass.
+12. **P-GUIDE-001** accept — delete `/compact and continue` from orchestrator path (keep for ephemeral); removal = substitution (wire rotation trigger).
+13. **P-FLEET-001** accept — one roster-owned socket/host; quarantine unmanaged; stale-session GC; prerequisite for INBOX identity-addressing.
+14. **P-WORKFLOW-001** accept — auto-sync ALLOWLIST not denylist; worktree/lease isolation for agent docs/source; DB-tracking obviates the flat-file-sweep criterion.
+15. **P-CONFORMANCE-001** accept — fleet lifecycle harness on REAL runtime artifacts + fault injection; the 100-rotations-lossless bar is a test; target the DB substrate.
+
+## Fleet operating model
+
+- **Project orchestrator** `mos-remediation` (this seat) owns the mission; coordinates under Mos (lead).
+- **Adversarial task decomposition:** `planner-opus` (robustness) + `planner-sol` (pragmatic) each decompose
+  the plan independently; orchestrator reconciles into `TASKS.md`/DB tasks. Oppositional by design.
+- **Delivery gates (non-negotiable):** author≠reviewer, PRE-REGISTERED diff-blind acceptance checks committed
+  before reading the diff, CI terminal-green, completion = merged PR + closed issue. rev-974 = mosaicstack reviewer.
+- **Compaction survival:** see `KICKSTART.md` in this dir — the resume procedure. Persist typed state, not transcript.

packages/mosaic/framework/tools/git/detect-platform.sh

@@ -91,13 +91,19 @@ remote = urlparse(f"//{remote_host}")
 if configured.scheme not in {"http", "https"} or configured.hostname != remote.hostname:
     raise SystemExit(1)
 
-configured_port = configured.port
-remote_port = remote.port
-if remote_port is None:
-    default_port = 80 if configured.scheme == "http" else 443
-    if configured_port not in {None, default_port}:
-        raise SystemExit(1)
-elif configured_port != remote_port:
+# Normalize by scheme: an implicit (portless) HTTP(S) URL and its explicit
+# default-port form (":80" for http, ":443" for https) name the same
+# provider endpoint. Apply that equivalence symmetrically -- whichever side
+# omits the port is treated as carrying the scheme's default port -- so
+# "configured implicit vs. remote explicit" and "configured explicit vs.
+# remote implicit" both match. (The remote side here is always an HTTP(S)
+# authority; an SSH remote's transport port is stripped by get_remote_host
+# before reaching this comparison, since it identifies an unrelated
+# service on the same host, not the HTTP(S) provider port.)
+default_port = 80 if configured.scheme == "http" else 443
+normalized_configured = configured.port if configured.port is not None else default_port
+normalized_remote = remote.port if remote.port is not None else default_port
+if normalized_configured != normalized_remote:
     raise SystemExit(1)
 raise SystemExit(0)
 PY
@@ -432,7 +438,11 @@ get_remote_host() {
     fi
     if [[ "$remote_url" =~ ^ssh://([^/]+)/ ]]; then
         local host="${BASH_REMATCH[1]}"
-        echo "${host##*@}"
+        host="${host##*@}"
+        # Strip an SSH transport port (e.g. "git.example:2222"): it names the
+        # SSH daemon port, not the HTTP(S) provider API port, and must not
+        # feed gitea_url_matches_host's port comparison (#850).
+        echo "${host%%:*}"
         return 0
     fi
     if [[ "$remote_url" =~ ^git@([^:]+): ]]; then

packages/mosaic/framework/tools/git/test-pr-review-gitea-comment.sh

@@ -73,7 +73,7 @@ case "${PR_REVIEW_TEST_MODE:-}" in
     request-changes)
         [[ "$*" == "pr reject 123 --repo mosaicstack/stack --login mosaicstack" ]] || exit 91
         ;;
-    legacy-fallback|comment-success|http-success|prefix-success|subpath-success|port-success|scp-ssh-success|url-ssh-success|write-transport-failure|write-http-failure|readback-failure)
+    legacy-fallback|comment-success|http-success|prefix-success|subpath-success|port-success|scp-ssh-success|url-ssh-success|ssh-transport-port-success|explicit-default-port-success|write-transport-failure|write-http-failure|readback-failure)
         if [[ "$*" == pr\ comment* ]]; then
             # tea v0.11.1 treats the nonexistent subcommand as `tea pr list` and exits 0.
             printf '%s\n' 'INDEX TITLE STATE'
@@ -144,7 +144,7 @@ case "${PR_REVIEW_TEST_MODE:-}" in
     write-http-failure)
         write_response 500 '{"message":"simulated rejection"}'
         ;;
-    approve|request-changes|comment-success|http-success|prefix-success|subpath-success|port-success|scp-ssh-success|url-ssh-success|readback-failure)
+    approve|request-changes|comment-success|http-success|prefix-success|subpath-success|port-success|scp-ssh-success|url-ssh-success|ssh-transport-port-success|explicit-default-port-success|readback-failure)
         if [[ "$method" == "POST" && "$url" == "$PR_REVIEW_EXPECTED_API_BASE/issues/123/comments" ]]; then
             PR_REVIEW_PAYLOAD="$payload" python3 - <<'PY'
 import json
@@ -291,6 +291,23 @@ grep -q '^POST https://git.example/api/v1/repos/owner/repo/issues/123/comments$'
 run_review url-ssh-success comment durable-body https://git.example ssh://[email protected]/owner/repo.git owner/repo
 grep -q '^POST https://git.example/api/v1/repos/owner/repo/issues/123/comments$' "$CURL_LOG"
 
+# #850 (follow-up to #812): an SSH remote's transport port (e.g. `ssh://
+# git@host:2222/...`) must NOT be compared against the configured HTTP(S) API
+# URL's port -- they identify unrelated properties (SSH daemon port vs. HTTP(S)
+# provider port) of the same Gitea host. Before the fix, host-match required
+# the configured URL to carry the identical port, so this failed closed even
+# though both remote and configured URL name the same host.
+run_review ssh-transport-port-success comment durable-body https://git.example ssh://[email protected]:2222/owner/repo.git owner/repo
+grep -q '^POST https://git.example/api/v1/repos/owner/repo/issues/123/comments$' "$CURL_LOG"
+
+# #850 (follow-up to #812): an explicit default HTTP(S) port on the remote
+# (`https://host:443/...`) must be treated as equal to an implicit
+# (portless) configured URL on BOTH sides -- the pre-fix comparison only
+# normalized the default port when the REMOTE side was portless, so the
+# inverse (explicit remote, implicit configured) form failed closed.
+run_review explicit-default-port-success comment durable-body https://git.example https://git.example:443/owner/repo.git owner/repo
+grep -q '^POST https://git.example/api/v1/repos/owner/repo/issues/123/comments$' "$CURL_LOG"
+
 if run_review write-transport-failure comment durable-body; then
     echo "Expected provider transport failure to return nonzero" >&2
     exit 1

packages/mosaic/framework/tools/orchestrator/README.md

@@ -0,0 +1,92 @@
+# orchestrator/ tools
+
+Helper scripts for r0 coordinator / orchestrator sessions — mission lifecycle,
+session health, continuation, and board maintenance. See
+`framework/guides/ORCHESTRATOR-PROTOCOL.md` for the surrounding process.
+
+| Script               | Purpose                                                                                         |
+| -------------------- | ----------------------------------------------------------------------------------------------- |
+| `mission-init.sh`    | Initialize a new orchestration mission (manifest, scratchpad, TASKS.md).                        |
+| `mission-status.sh`  | Show the mission progress dashboard.                                                            |
+| `session-run.sh`     | Generate continuation context and launch the target runtime.                                    |
+| `session-resume.sh`  | Crash recovery for dead orchestrator sessions.                                                  |
+| `session-status.sh`  | Check agent session health.                                                                     |
+| `continue-prompt.sh` | Generate the continuation prompt for the next session.                                          |
+| `board-roll.sh`      | Keep a LIVE orchestration board under its byte cap by rolling the oldest entries to its LEDGER. |
+| `smoke-test.sh`      | Behavior smoke checks for the coord continue/run workflows.                                     |
+| `test-board-roll.sh` | Regression harness for `board-roll.sh`.                                                         |
+| `_lib.sh`            | Shared functions sourced by the above (state files, TASKS.md parsing, locks).                   |
+
+## board-roll.sh
+
+Coordinator boards (`MOS-ORCHESTRATION-BOARD-LIVE.md`, `MS-LEAD-BOARD-LIVE.md`)
+follow a **"< 8 KB LIVE"** discipline: the LIVE board is the only file loaded on
+resume, so it must stay small, and history lives in an append-only LEDGER. When a
+board write would push LIVE over its cap, coordinators otherwise hand-trim and
+retry every time — an observed 38 ABORT-OVER-CAP cycles in one 24 h window.
+`board-roll.sh` automates that trim mechanically and reversibly: the audit trail
+is moved to the LEDGER instead of being hand-deleted.
+
+### Contract (conservative — it never guesses what is safe to move)
+
+The LIVE board opts in by wrapping its aging archival ticks in an explicit roll
+zone. Everything **outside** the markers (title, protocol blockquote, curated
+always-current `##` sections) is pinned and never touched:
+
+```markdown
+# MOS ORCHESTRATION BOARD — LIVE state
+
+> protocol blockquote … (pinned)
+
+## 🟦 Curated always-current section (pinned)
+
+…
+
+<!-- BOARD-ROLL:START -->
+
+### 2026-07-22 (mid²²) — newest tick, stays longest
+
+…
+
+### 2026-07-20 (dawn) — oldest tick, rolled first
+
+…
+
+<!-- BOARD-ROLL:END -->
+```
+
+Inside the zone, entries are delimited by a heading marker (default `### `) and
+are assumed **newest-first (top) → oldest-last (bottom)**. `board-roll.sh` moves
+whole oldest (bottom-most) entry blocks out of the zone and appends them verbatim
+to the LEDGER, one at a time, until LIVE is back under the cap or the zone is
+empty. If the board has no markers, it exits `3` and changes nothing — adding the
+markers is a deliberate opt-in by the board owner.
+
+### Usage
+
+```bash
+board-roll.sh --live <LIVE.md> --ledger <LEDGER.md> [options]
+
+  --live   <path>    LIVE board file (required)
+  --ledger <path>    append-only LEDGER file (required; created if absent)
+  --cap    <bytes>   size ceiling for LIVE (default 8192)
+  --marker <prefix>  entry-heading prefix inside the roll zone (default "### ")
+  --dry-run          report what would move; change nothing
+  -h, --help         show help and exit 0
+```
+
+Only **one** roll zone is supported. If a board carries more than one
+`BOARD-ROLL:START`/`END` pair, `board-roll.sh` refuses (exit `3`, zero changes)
+rather than span first-START..last-END and relocate the curated content between
+the zones — consolidate the ticks into a single zone instead.
+
+Exit codes: `0` LIVE under cap (already, or after rolling) — on `--dry-run`, a
+plan exists or nothing to do · `2` usage / argument / IO error · `3` cannot meet
+the cap (no markers, **more than one marker pair**, or the pinned sections alone
+exceed the cap and need a manual trim).
+
+Writes are atomic (temp file + `mv`, LEDGER first) so a failure never leaves a
+board half-written; line endings are normalized to LF on rewrite. `--dry-run`
+first is recommended when wiring it into a board update protocol.
+
+Run the regression suite with `bash test-board-roll.sh`.

packages/mosaic/framework/tools/orchestrator/board-roll.sh

@@ -0,0 +1,277 @@
+#!/usr/bin/env bash
+#
+# board-roll.sh — keep a LIVE orchestration board under its byte cap by rolling
+#                 the oldest archival entries out to its append-only LEDGER.
+#
+# WHY: coordinator boards (MOS-ORCHESTRATION-BOARD-LIVE.md, MS-LEAD-BOARD-LIVE.md)
+# enforce a "< 8 KB LIVE" discipline via a self-guard that ABORTs the board write
+# when the file exceeds the cap. In practice the LIVE board keeps bumping the cap,
+# so coordinators hand-trim + retry every time (observed: 38 ABORT-OVER-CAP cycles
+# in a 24h window on one coordinator). This automates that trim, mechanically and
+# reversibly, so the audit trail is preserved in the LEDGER instead of hand-deleted.
+#
+# CONTRACT (conservative by design — it NEVER guesses what is safe to move):
+#   The LIVE board must declare an explicit ROLL ZONE with HTML-comment markers:
+#
+#       <!-- BOARD-ROLL:START -->
+#       ### 2026-07-22 (newest tick — stays longest)
+#       ...
+#       ### 2026-07-19 (oldest tick — rolled first)
+#       ...
+#       <!-- BOARD-ROLL:END -->
+#
+#   Everything OUTSIDE the markers (title, protocol blockquote, curated always-current
+#   `##` sections) is PINNED and never touched. Inside the zone, entries are delimited
+#   by a heading marker (default `### `) and are assumed newest-first (top) → oldest-last
+#   (bottom), matching board convention. board-roll moves whole oldest (bottom-most)
+#   entry blocks out of the zone and APPENDS them verbatim to the LEDGER, one block at a
+#   time, until the LIVE file is back under the cap or the zone is empty.
+#
+#   If no markers are present, it exits 3 without changing anything (safe default —
+#   adding the markers is a deliberate opt-in by the board owner).
+#
+# USAGE:
+#   board-roll.sh --live <LIVE.md> --ledger <LEDGER.md> [options]
+#
+# OPTIONS:
+#   --live   <path>   LIVE board file (required)
+#   --ledger <path>   append-only LEDGER file (required; created if absent)
+#   --cap    <bytes>  size ceiling for LIVE (default 8192)
+#   --marker <prefix> entry-heading prefix inside the roll zone (default "### ")
+#   --dry-run         report what would move + resulting size; change nothing
+#   -h, --help        print usage and exit 0
+#
+# EXIT CODES:
+#   0  LIVE is under cap (already, or after rolling); on --dry-run, 0 = a plan exists
+#      (or nothing to do)
+#   2  usage / argument / IO error (bad flag, missing file, unwritable target)
+#   3  cannot satisfy the cap: no roll markers present, MORE THAN ONE marker pair
+#      (multiple zones are refused, not guessed), OR the zone was emptied and LIVE
+#      is still over cap (curated pinned sections need a manual trim)
+#
+# NOTE: line endings are normalized to LF on rewrite (boards are LF markdown); a
+# trailing newline is always ensured. Writes are atomic (temp file + mv) so a
+# failure never leaves LIVE or LEDGER half-written.
+
+set -euo pipefail
+
+START_MARK='<!-- BOARD-ROLL:START -->'
+END_MARK='<!-- BOARD-ROLL:END -->'
+
+usage() {
+    cat <<'EOF'
+Usage: board-roll.sh --live <LIVE.md> --ledger <LEDGER.md> [options]
+
+Roll the oldest entries out of a LIVE orchestration board into its LEDGER
+until the LIVE file is under a byte cap. Conservative: only content inside
+explicit <!-- BOARD-ROLL:START -->/<!-- BOARD-ROLL:END --> markers is moved.
+
+Options:
+  --live   <path>    LIVE board file (required)
+  --ledger <path>    append-only LEDGER file (required; created if absent)
+  --cap    <bytes>   size ceiling for LIVE (default 8192)
+  --marker <prefix>  entry-heading prefix inside the roll zone (default "### ")
+  --dry-run          report what would move; change nothing
+  -h, --help         show this help and exit 0
+
+Exit: 0 under cap (or dry-run plan) · 2 usage/IO error · 3 cannot meet cap
+      (no markers, or pinned sections alone exceed the cap).
+EOF
+}
+
+die() { echo "board-roll: $*" >&2; exit 2; }
+
+LIVE=""; LEDGER=""; CAP=8192; MARKER='### '; DRYRUN=0
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        --live)    LIVE="${2:-}"; shift 2 || die "--live needs a value" ;;
+        --ledger)  LEDGER="${2:-}"; shift 2 || die "--ledger needs a value" ;;
+        --cap)     CAP="${2:-}"; shift 2 || die "--cap needs a value" ;;
+        --marker)  MARKER="${2:-}"; shift 2 || die "--marker needs a value" ;;
+        --dry-run) DRYRUN=1; shift ;;
+        -h|--help) usage; exit 0 ;;
+        *) usage >&2; die "unknown option: $1" ;;
+    esac
+done
+
+[[ -n "$LIVE"   ]] || { usage >&2; die "--live is required"; }
+[[ -n "$LEDGER" ]] || { usage >&2; die "--ledger is required"; }
+[[ -f "$LIVE"   ]] || die "LIVE file not found: $LIVE"
+[[ "$CAP" =~ ^[0-9]+$ ]] || die "--cap must be a non-negative integer, got: $CAP"
+
+# --- read LIVE into a line array (newlines stripped; re-added on write) ---------
+mapfile -t LINES < "$LIVE"
+
+# byte size of an array rendered as LF-terminated text
+render_size() {
+    if [[ $# -eq 0 ]]; then printf 0; return; fi
+    printf '%s\n' "$@" | wc -c
+}
+
+orig_size=$(render_size "${LINES[@]}")
+
+# --- already under cap → nothing to do -----------------------------------------
+if (( orig_size < CAP )); then
+    echo "board-roll: LIVE is ${orig_size}B (< cap ${CAP}B) — nothing to roll."
+    exit 0
+fi
+
+# --- locate the roll-zone markers ----------------------------------------------
+# Exactly ONE marker pair is supported. If a board carries more than one START or
+# END marker we REFUSE (exit 3, zero changes) rather than guess: a naive
+# first-START..last-END span would swallow the curated content and the intermediate
+# markers sitting between two intended zones and silently relocate that pinned text
+# to the LEDGER — the exact data-loss this tool exists to prevent. Refusing matches
+# the "no markers = exit 3" conservative posture.
+start_idx=-1; end_idx=-1; start_count=0; end_count=0
+for i in "${!LINES[@]}"; do
+    if [[ "${LINES[$i]}" == "$START_MARK" ]]; then
+        if (( start_count == 0 )); then start_idx=$i; fi
+        start_count=$(( start_count + 1 ))
+    fi
+    if [[ "${LINES[$i]}" == "$END_MARK" ]]; then
+        end_idx=$i
+        end_count=$(( end_count + 1 ))
+    fi
+done
+if (( start_count > 1 || end_count > 1 )); then
+    echo "board-roll: LIVE is ${orig_size}B (>= cap ${CAP}B) but has ${start_count} START / ${end_count} END" >&2
+    echo "  markers — only a SINGLE '$START_MARK' … '$END_MARK' roll zone is supported." >&2
+    echo "  Multiple zones are refused (not guessed) so content between zones is never relocated." >&2
+    echo "  Consolidate the archival ticks into one zone, or trim manually." >&2
+    exit 3
+fi
+if (( start_idx < 0 || end_idx < 0 || end_idx <= start_idx )); then
+    echo "board-roll: LIVE is ${orig_size}B (>= cap ${CAP}B) but no usable roll zone" >&2
+    echo "  (need '$START_MARK' then '$END_MARK'). Add the markers around the" >&2
+    echo "  archival tick section to opt this board into automatic rolling." >&2
+    exit 3
+fi
+
+# preamble = lines [0 .. start_idx]   (inclusive of START marker)
+# zone     = lines (start_idx .. end_idx)  (exclusive of both markers)
+# footer   = lines [end_idx .. end]   (inclusive of END marker)
+preamble=(); zone=(); footer=()
+for i in "${!LINES[@]}"; do
+    if   (( i <= start_idx )); then preamble+=("${LINES[$i]}")
+    elif (( i <  end_idx  )); then zone+=("${LINES[$i]}")
+    else footer+=("${LINES[$i]}")
+    fi
+done
+
+# --- split the zone into a fixed head + entry blocks ----------------------------
+# zone_head = any zone lines before the first entry marker (kept, never rolled).
+# blocks[k] = newline-joined text of entry k (marker line .. line before next marker).
+zone_head=(); declare -a block_start=()
+first_block=-1
+for i in "${!zone[@]}"; do
+    if [[ "${zone[$i]}" == "$MARKER"* ]]; then
+        [[ $first_block -eq -1 ]] && first_block=$i
+        block_start+=("$i")
+    fi
+done
+if (( first_block == -1 )); then
+    echo "board-roll: LIVE is ${orig_size}B (>= cap ${CAP}B) but the roll zone has no" >&2
+    echo "  '${MARKER}' entries to move. Trim the pinned sections manually." >&2
+    exit 3
+fi
+for (( i=0; i<first_block; i++ )); do zone_head+=("${zone[$i]}"); done
+
+nblocks=${#block_start[@]}
+# block k spans zone[ block_start[k] .. (block_start[k+1]-1 or end-of-zone) ]
+block_text() {  # $1 = block index → prints the block's lines, LF-joined (no trailing)
+    local k=$1 s e
+    s=${block_start[$k]}
+    if (( k+1 < nblocks )); then e=$(( block_start[$((k+1))] - 1 )); else e=$(( ${#zone[@]} - 1 )); fi
+    local out=()
+    for (( j=s; j<=e; j++ )); do out+=("${zone[$j]}"); done
+    printf '%s\n' "${out[@]}"
+}
+
+# --- greedily roll oldest (bottom-most) blocks until under cap ------------------
+# keep = number of newest blocks retained; start with all, drop from the bottom.
+keep=$nblocks       # blocks [keep .. nblocks-1] are the oldest set that gets moved
+current_size=$orig_size
+build_live_size() {  # size of LIVE if we keep blocks [0 .. keep-1]
+    local acc=("${preamble[@]}" "${zone_head[@]}")
+    local k s e j
+    for (( k=0; k<keep; k++ )); do
+        s=${block_start[$k]}
+        if (( k+1 < nblocks )); then e=$(( block_start[$((k+1))] - 1 )); else e=$(( ${#zone[@]} - 1 )); fi
+        for (( j=s; j<=e; j++ )); do acc+=("${zone[$j]}"); done
+    done
+    acc+=("${footer[@]}")
+    render_size "${acc[@]}"
+}
+while (( current_size >= CAP && keep > 0 )); do
+    keep=$(( keep - 1 ))
+    current_size=$(build_live_size)
+done
+
+moved_count=$(( nblocks - keep ))
+if (( moved_count == 0 )); then
+    # zone had entries but none movable brought us under (shouldn't happen: keep hits 0)
+    echo "board-roll: could not reduce LIVE below cap (${current_size}B >= ${CAP}B)." >&2
+    exit 3
+fi
+
+# --- dry-run report -------------------------------------------------------------
+plan_headers() {
+    local k
+    for (( k=keep; k<nblocks; k++ )); do
+        # first line of each moved block
+        printf '    %s\n' "${zone[${block_start[$k]}]}"
+    done
+}
+if (( DRYRUN )); then
+    echo "board-roll: DRY RUN"
+    echo "  LIVE now:   ${orig_size}B (cap ${CAP}B) — over by $(( orig_size - CAP ))B"
+    echo "  would roll: ${moved_count} of ${nblocks} entr$([[ $moved_count -eq 1 ]] && echo y || echo ies) (oldest first):"
+    plan_headers
+    echo "  LIVE after: ${current_size}B"
+    if (( current_size >= CAP )); then
+        echo "  WARNING: still >= cap after emptying the zone; pinned sections need a manual trim." >&2
+        exit 3
+    fi
+    exit 0
+fi
+
+# --- commit the roll atomically -------------------------------------------------
+live_tmp="$(mktemp "${LIVE}.roll.XXXXXX")" || die "cannot create temp next to LIVE"
+ledger_tmp=""
+# shellcheck disable=SC2329  # invoked indirectly via `trap cleanup EXIT`
+cleanup() { rm -f "$live_tmp" "$ledger_tmp" 2>/dev/null || true; }
+trap cleanup EXIT
+
+# new LIVE = preamble + zone_head + kept blocks + footer
+{
+    printf '%s\n' "${preamble[@]}" "${zone_head[@]}"
+    for (( k=0; k<keep; k++ )); do block_text "$k"; done
+    printf '%s\n' "${footer[@]}"
+} > "$live_tmp"
+
+# LEDGER gets the moved blocks appended verbatim, in original top→bottom order,
+# under a provenance separator. LEDGER is append-only, so we only ever add at EOF.
+ledger_tmp="$(mktemp "${LEDGER}.roll.XXXXXX")" || die "cannot create temp next to LEDGER"
+if [[ -f "$LEDGER" ]]; then cat "$LEDGER" > "$ledger_tmp"; fi
+# ensure a trailing newline on existing content before appending
+if [[ -s "$ledger_tmp" && -n "$(tail -c1 "$ledger_tmp")" ]]; then printf '\n' >> "$ledger_tmp"; fi
+{
+    printf '\n<!-- board-roll: %d entr%s rolled from %s -->\n' \
+        "$moved_count" "$([[ $moved_count -eq 1 ]] && echo y || echo ies)" "$(basename "$LIVE")"
+    for (( k=keep; k<nblocks; k++ )); do block_text "$k"; done
+} >> "$ledger_tmp"
+
+# atomic swap (both, LEDGER first so a crash never drops content that left LIVE)
+mv "$ledger_tmp" "$LEDGER"; ledger_tmp=""
+mv "$live_tmp" "$LIVE"; live_tmp=""
+trap - EXIT
+
+# read the real on-disk size back (truthful, not the predicted value)
+final_size=$(wc -c < "$LIVE")
+echo "board-roll: rolled ${moved_count} entr$([[ $moved_count -eq 1 ]] && echo y || echo ies) to $(basename "$LEDGER"); LIVE ${orig_size}B → ${final_size}B (cap ${CAP}B)."
+if (( final_size >= CAP )); then
+    echo "board-roll: still >= cap after rolling all zone entries; pinned sections need a manual trim." >&2
+    exit 3
+fi
+exit 0

packages/mosaic/framework/tools/orchestrator/test-board-roll.sh

@@ -0,0 +1,156 @@
+#!/usr/bin/env bash
+# Regression harness for board-roll.sh — rolling oldest LIVE-board entries to LEDGER.
+#
+# Asserts:
+#   1. Under cap → no-op, exit 0, files unchanged.
+#   2. Over cap, no roll markers → exit 3, LIVE unchanged (never guesses).
+#   3. Over cap, markers present → rolls the fewest oldest entries to get under cap,
+#      LIVE ends under cap, pinned preamble/footer + newest entries preserved.
+#   4. Rolled blocks land in the LEDGER verbatim, oldest set in original order.
+#   5. --dry-run changes nothing and reports a plan.
+#   6. Zone emptied but pinned sections alone exceed cap → exit 3.
+#   7. --help exits 0 and prints usage; an unknown flag exits nonzero (#701 discipline).
+#   8. More than one marker pair → exit 3, unchanged; curated content between the two
+#      zones is never relocated to the LEDGER (rev0 #868 regression).
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+SUT="$SCRIPT_DIR/board-roll.sh"
+
+fail=0
+note() { echo "FAIL: $*" >&2; fail=1; }
+
+WORK="$(mktemp -d)"
+trap 'rm -rf "$WORK"' EXIT
+
+# builds a LIVE board: pinned preamble + roll zone with N dated entries (newest first),
+# each entry padded to be individually large so the cap math is predictable.
+make_board() {  # $1 file  $2 n_entries  $3 with_markers(1/0)  $4 pad_bytes
+    local f=$1 n=$2 markers=$3 pad=$4 i padtxt
+    padtxt=$(head -c "$pad" < /dev/zero | tr '\0' 'x')
+    {
+        echo "# BOARD — LIVE"
+        echo "> pinned protocol blockquote, never rolled."
+        echo
+        echo "## Curated always-current section (pinned)"
+        echo "- this stays no matter what"
+        echo
+        [[ "$markers" == 1 ]] && echo '<!-- BOARD-ROLL:START -->'
+        # newest first (i=n .. 1); oldest (i=1) ends at the bottom
+        for (( i=n; i>=1; i-- )); do
+            echo "### 2026-07-$(printf '%02d' $i) tick number $i"
+            echo "- detail $i $padtxt"
+            echo
+        done
+        [[ "$markers" == 1 ]] && echo '<!-- BOARD-ROLL:END -->'
+    } > "$f"
+    return 0
+}
+
+# ── 1. under cap → no-op ───────────────────────────────────────────────────────
+L="$WORK/live1.md"; G="$WORK/ledger1.md"; : > "$G"
+make_board "$L" 2 1 10
+before=$(cat "$L")
+if ! out=$(bash "$SUT" --live "$L" --ledger "$G" --cap 100000 2>&1); then
+    note "under-cap should exit 0 (got nonzero): $out"
+fi
+[[ "$(cat "$L")" == "$before" ]] || note "under-cap modified LIVE"
+[[ -s "$G" ]] && note "under-cap wrote to LEDGER"
+
+# ── 2. over cap, no markers → exit 3, unchanged ────────────────────────────────
+L="$WORK/live2.md"; G="$WORK/ledger2.md"; : > "$G"
+make_board "$L" 6 0 400
+before=$(cat "$L")
+set +e; bash "$SUT" --live "$L" --ledger "$G" --cap 800 >/dev/null 2>&1; rc=$?; set -e
+[[ "$rc" -eq 3 ]] || note "no-markers over-cap should exit 3 (got $rc)"
+[[ "$(cat "$L")" == "$before" ]] || note "no-markers run modified LIVE (must never guess)"
+
+# ── 3+4. over cap with markers → rolls oldest, LIVE under cap, LEDGER gets them ─
+L="$WORK/live3.md"; G="$WORK/ledger3.md"; echo "# LEDGER" > "$G"
+make_board "$L" 6 1 400          # 6 entries, each ~>400B
+big=$(wc -c < "$L")
+[[ "$big" -ge 2000 ]] || note "fixture too small to test rolling ($big B)"
+if ! out=$(bash "$SUT" --live "$L" --ledger "$G" --cap 2000 2>&1); then
+    note "marker roll should exit 0 when it can get under cap: $out"
+fi
+after=$(wc -c < "$L")
+[[ "$after" -lt 2000 ]] || note "LIVE still >= cap after roll ($after B)"
+# pinned content survives
+grep -q "Curated always-current section" "$L" || note "roll dropped pinned section"
+grep -q 'BOARD-ROLL:START' "$L" || note "roll dropped START marker"
+grep -q 'BOARD-ROLL:END' "$L"   || note "roll dropped END marker"
+# newest entry (07-06) stays; oldest (07-01) is the first to leave
+grep -q "### 2026-07-06 tick number 6" "$L" || note "roll dropped the newest entry"
+grep -q "### 2026-07-01 tick number 1" "$L" && note "oldest entry not rolled out of LIVE"
+# oldest went to LEDGER
+grep -q "### 2026-07-01 tick number 1" "$G" || note "oldest entry not appended to LEDGER"
+grep -q "board-roll:.*rolled from live3.md" "$G" || note "LEDGER missing provenance separator"
+# a rolled entry must not be duplicated (present in exactly one of LIVE/LEDGER)
+if grep -q "### 2026-07-01 tick number 1" "$L"; then note "rolled entry duplicated in LIVE"; fi
+# LEDGER original content preserved
+grep -q "^# LEDGER" "$G" || note "roll clobbered existing LEDGER content"
+
+# ── 5. --dry-run changes nothing ───────────────────────────────────────────────
+L="$WORK/live5.md"; G="$WORK/ledger5.md"; echo "# LEDGER" > "$G"
+make_board "$L" 6 1 400
+before_l=$(cat "$L"); before_g=$(cat "$G")
+out=$(bash "$SUT" --live "$L" --ledger "$G" --cap 2000 --dry-run 2>&1) || note "dry-run exited nonzero: $out"
+echo "$out" | grep -qi "dry run" || note "dry-run did not announce itself"
+echo "$out" | grep -q "would roll" || note "dry-run did not report a plan"
+[[ "$(cat "$L")" == "$before_l" ]] || note "dry-run modified LIVE"
+[[ "$(cat "$G")" == "$before_g" ]] || note "dry-run modified LEDGER"
+
+# ── 6. zone emptied, pinned alone over cap → exit 3 ────────────────────────────
+# cap 120 is below the pinned preamble+footer size (~180B), so even after rolling
+# every zone entry the LIVE file stays over cap → must report the unsatisfiable case.
+L="$WORK/live6.md"; G="$WORK/ledger6.md"; echo "# LEDGER" > "$G"
+make_board "$L" 3 1 50
+set +e; bash "$SUT" --live "$L" --ledger "$G" --cap 120 >/dev/null 2>&1; rc=$?; set -e
+[[ "$rc" -eq 3 ]] || note "unsatisfiable cap should exit 3 (got $rc)"
+
+# ── 7. help exits 0, unknown flag exits nonzero (#701) ─────────────────────────
+if ! out=$(bash "$SUT" --help 2>&1); then note "--help exited nonzero"; fi
+[[ "$out" == Usage:* ]] || note "--help did not print usage"
+bash "$SUT" -h >/dev/null 2>&1 || note "-h exited nonzero"
+if bash "$SUT" --not-a-real-flag >/dev/null 2>&1; then note "unknown flag was accepted"; fi
+if bash "$SUT" --live "$WORK/live3.md" >/dev/null 2>&1; then note "missing --ledger was accepted"; fi
+
+# ── 8. multiple marker pairs → exit 3, unchanged (no cross-zone relocation) ─────
+# Two separately-marked zones with a curated pinned section BETWEEN them. A naive
+# first-START..last-END span would sweep that curated section (and the intermediate
+# markers) into the LEDGER. board-roll must refuse (exit 3) and touch nothing.
+L="$WORK/live8.md"; G="$WORK/ledger8.md"; echo "# LEDGER" > "$G"
+pad8=$(head -c 300 < /dev/zero | tr '\0' 'x')
+{
+    echo "# BOARD — LIVE"
+    echo "> pinned protocol blockquote"
+    echo
+    echo '<!-- BOARD-ROLL:START -->'
+    echo "### 2026-07-10 zone-A newest"
+    echo "- detail A2 $pad8"
+    echo "### 2026-07-09 zone-A oldest"
+    echo "- detail A1 $pad8"
+    echo '<!-- BOARD-ROLL:END -->'
+    echo
+    echo "## Curated-between-zones (pinned — must never move)"
+    echo "- CANARY-BETWEEN keep me"
+    echo
+    echo '<!-- BOARD-ROLL:START -->'
+    echo "### 2026-07-08 zone-B newest"
+    echo "- detail B2 $pad8"
+    echo "### 2026-07-07 zone-B oldest"
+    echo "- detail B1 $pad8"
+    echo '<!-- BOARD-ROLL:END -->'
+} > "$L"
+before8=$(cat "$L")
+set +e; bash "$SUT" --live "$L" --ledger "$G" --cap 80 >/dev/null 2>&1; rc=$?; set -e
+[[ "$rc" -eq 3 ]] || note "multi-pair board should exit 3 (got $rc)"
+[[ "$(cat "$L")" == "$before8" ]] || note "multi-pair run modified LIVE (must never guess across zones)"
+grep -q "CANARY-BETWEEN keep me" "$L" || note "multi-pair run relocated curated between-zones content"
+grep -q "CANARY-BETWEEN" "$G" && note "curated between-zones content leaked into LEDGER"
+
+if [[ "$fail" -eq 0 ]]; then
+    echo "board-roll regression passed (8 groups)"
+fi
+exit "$fail"

packages/mosaic/package.json

@@ -25,7 +25,7 @@
     "lint": "eslint src",
     "typecheck": "tsc --noEmit",
     "test": "vitest run --passWithNoTests && pnpm run test:framework-shell",
-    "test:framework-shell": "python3 src/lease-broker/daemon_deadline_unittest.py && python3 src/lease-broker/normative_fragments_unittest.py && python3 src/lease-broker/receipt_challenge_unittest.py && python3 src/lease-broker/context_recovery_unittest.py && python3 src/lease-broker/recovery_runtime_unittest.py && python3 src/lease-broker/recovery_b1_adversarial_unittest.py && python3 src/lease-broker/framework_skill_portability_unittest.py && python3 src/mutator-gate/runtime_tools_unittest.py && python3 src/mutator-gate/runtime_launch_guard_unittest.py && python3 framework/tools/lease-broker/check-runtime-launches.py --root ../.. && bash framework/tools/codex/test-pr-diff-context.sh && bash framework/tools/qa/test-deps-preflight.sh"
+    "test:framework-shell": "python3 src/lease-broker/daemon_deadline_unittest.py && python3 src/lease-broker/normative_fragments_unittest.py && python3 src/lease-broker/receipt_challenge_unittest.py && python3 src/lease-broker/context_recovery_unittest.py && python3 src/lease-broker/recovery_runtime_unittest.py && python3 src/lease-broker/recovery_b1_adversarial_unittest.py && python3 src/lease-broker/framework_skill_portability_unittest.py && python3 src/mutator-gate/runtime_tools_unittest.py && python3 src/mutator-gate/runtime_launch_guard_unittest.py && python3 framework/tools/lease-broker/check-runtime-launches.py --root ../.. && bash framework/tools/codex/test-pr-diff-context.sh && bash framework/tools/qa/test-deps-preflight.sh && bash framework/tools/git/test-pr-review-gitea-comment.sh"
   },
   "dependencies": {
     "@mosaicstack/brain": "workspace:*",

packages/mosaic/src/mutator-gate/mutator-gate.acceptance.spec.ts

@@ -661,13 +661,27 @@ describe('whole mutator-class lease gate', () => {
   test('observer revocation and monotonic TTL expiry deny the next mutator', async () => {
     const { socket } = await startBroker();
     const sessionId = await register(socket);
-    const pending = await beginVerification(socket, sessionId, 'claude', 1, 1);
-    await promote(socket, sessionId, pending.receipt_challenge!);
 
+    // Establish the lease with a normal (non-racing) TTL first and prove it
+    // authorizes. This "still valid" check is setup, not a TTL-expiry
+    // assertion, so it must not share a lease with a 1-second TTL: on a
+    // contended push-CI host, scheduling delay alone between promote() and
+    // this authorize() call can consume that entire 1-second margin and
+    // spuriously deny it (CI#1945). Using a generous TTL here removes that
+    // real-time race without touching lease-gate security semantics.
+    const pending = await beginVerification(socket, sessionId, 'claude');
+    await promote(socket, sessionId, pending.receipt_challenge!);
     expect(await authorize(socket, sessionId, 'claude', 'Bash')).toMatchObject({
       ok: true,
       decision: 'allow',
     });
+
+    // A dedicated, isolated short-TTL lease drives the deliberate monotonic
+    // expiry demonstration below. It is never used for anything but the
+    // wait-then-expire assertion, so there is no setup work racing its
+    // 1-second window.
+    const shortLived = await beginVerification(socket, sessionId, 'claude', 1, 1, 2);
+    await promote(socket, sessionId, shortLived.receipt_challenge!);
     await new Promise((resolve) => setTimeout(resolve, 1_100));
     expect(await authorize(socket, sessionId, 'claude', 'Bash')).toMatchObject({
       ok: false,
@@ -675,7 +689,7 @@ describe('whole mutator-class lease gate', () => {
       decision: 'deny',
     });
 
-    const refreshed = await beginVerification(socket, sessionId, 'claude', 1, 300, 2);
+    const refreshed = await beginVerification(socket, sessionId, 'claude', 1, 300, 3);
     await promote(socket, sessionId, refreshed.receipt_challenge!);
     expect(
       await request(socket, {

skills/glpi-create/SKILL.md

@@ -0,0 +1,50 @@
+# Skill: glpi-create — Open a New GLPI Ticket
+
+> Create a new GLPI helpdesk ticket. Mutates GLPI — confirm the details before running.
+
+## When to use
+
+- Logging a new incident or request that should live in the helpdesk queue.
+
+## Required information
+
+- **title** — short subject line.
+- **content** — description of the issue / request.
+
+## Optional
+
+- **priority** — `1`=VeryLow, `2`=Low, `3`=Medium (default), `4`=High, `5`=VeryHigh, `6`=Major.
+- **type** — `1`=Incident (default), `2`=Request.
+
+## Command
+
+Wraps the existing tooling:
+
+```bash
+~/.config/mosaic/tools/glpi/ticket-create.sh \
+  -t "<title>" \
+  -c "<content>" \
+  [-p <priority>] \
+  [-y <type>] \
+  [-f json]
+```
+
+Example:
+
+```bash
+~/.config/mosaic/tools/glpi/ticket-create.sh \
+  -t "Paint-area camera install" \
+  -c "Ordered 2 cameras for Paint and stock; schedule mounting + NVR config." \
+  -p 3 -y 2
+```
+
+## After creating
+
+- Note the returned **ticket ID** — you'll need it for **[[glpi-followup]]** and
+  **[[glpi-solve]]**.
+- If it should also be tracked as brain work, add a matching task (see the `add-task` skill).
+
+## Guardrails
+
+- Confirm title/content/priority with the user before creating — a ticket is outward-facing.
+- Never echo GLPI tokens.

skills/glpi-followup/SKILL.md

@@ -0,0 +1,56 @@
+# Skill: glpi-followup — Add a Followup to a GLPI Ticket
+
+> Post a followup (comment / progress note / resolution writeup) to a GLPI ticket.
+> This documents work but does **not** change the ticket status — to close a ticket
+> out, follow with **[[glpi-solve]]** to set status to Solved.
+
+## When to use
+
+- Recording progress, a decision, or a root-cause/resolution note on a ticket.
+- The documentation step that usually precedes closing a ticket out (`glpi-solve`).
+
+## Critical quirk
+
+Use the **top-level `/ITILFollowup` endpoint**, NOT `/Ticket/<id>/ITILFollowup`. The
+sub-resource path returns permission errors even with a Super-Admin profile.
+
+## Procedure
+
+### 1. Session + creds
+
+```bash
+SESSION=$(~/.config/mosaic/tools/glpi/session-init.sh -q)
+source ~/.config/mosaic/tools/_lib/credentials.sh && load_credentials glpi
+```
+
+### 2. Post the followup
+
+```bash
+TICKET_ID=<id>
+CONTENT="<the followup text>"
+curl -sk -X POST "${GLPI_URL}/ITILFollowup" \
+  -H "App-Token: $GLPI_APP_TOKEN" \
+  -H "Session-Token: $SESSION" \
+  -H "Content-Type: application/json" \
+  -d "$(jq -n --argjson id "$TICKET_ID" --arg c "$CONTENT" \
+        '{input:{itemtype:"Ticket", items_id:$id, content:$c}}')"
+```
+
+Expect HTTP 201. Building the payload with `jq` keeps quotes/newlines in the content safe.
+
+### 3. Long or multi-paragraph content
+
+Write the note to a file first, then read it into the payload:
+
+```bash
+curl -sk -X POST "${GLPI_URL}/ITILFollowup" \
+  -H "App-Token: $GLPI_APP_TOKEN" -H "Session-Token: $SESSION" \
+  -H "Content-Type: application/json" \
+  -d "$(jq -n --argjson id "$TICKET_ID" --rawfile c /path/to/note.md \
+        '{input:{itemtype:"Ticket", items_id:$id, content:$c}}')"
+```
+
+## Guardrails
+
+- Never echo the GLPI app/user/session tokens.
+- A followup alone leaves the ticket open. If the work is done, run **[[glpi-solve]]** next.

skills/glpi-list/SKILL.md

@@ -0,0 +1,57 @@
+# Skill: glpi-list — Query GLPI Tickets
+
+> Quick lookups of GLPI helpdesk tickets by status or recency. Read-only.
+
+## When to use
+
+- "What tickets are open / pending?" · "Show recent tickets" · finding a ticket ID
+  before running **[[glpi-followup]]** or **[[glpi-solve]]**.
+
+## Command
+
+Wraps the existing tooling:
+
+```bash
+GLPI=~/.config/mosaic/tools/glpi
+
+# Most recent tickets (default 50, newest first)
+"$GLPI/ticket-list.sh"
+
+# Filter by status: new | processing | pending | solved | closed
+"$GLPI/ticket-list.sh" -s pending
+
+# JSON output (for parsing / piping to jq) and a custom limit
+"$GLPI/ticket-list.sh" -s processing -f json -l 20
+```
+
+Status IDs: 1 New · 2/3 Processing · 4 Pending · 5 Solved · 6 Closed.
+
+## Details lookup for one ticket
+
+When you have an ID and want the full record:
+
+```bash
+SESSION=$(~/.config/mosaic/tools/glpi/session-init.sh -q)
+source ~/.config/mosaic/tools/_lib/credentials.sh && load_credentials glpi
+curl -sk "${GLPI_URL}/Ticket/<id>?expand_dropdowns=true" \
+  -H "App-Token: $GLPI_APP_TOKEN" -H "Session-Token: $SESSION" \
+  | jq '{id, name, status, date, date_mod}'
+
+# Followups on a ticket
+curl -sk "${GLPI_URL}/Ticket/<id>/ITILFollowup" \
+  -H "App-Token: $GLPI_APP_TOKEN" -H "Session-Token: $SESSION" \
+  | jq '.[] | {date, content}'
+```
+
+(Reading followups via the sub-resource is fine — only _creating_ them requires the
+top-level `/ITILFollowup` endpoint. See **[[glpi-followup]]**.)
+
+## Present to user
+
+Group by status, one line per ticket: `#<id> · <title> · <status> · <last-modified>`.
+Use neutral phrasing — no "OVERDUE"/"URGENT".
+
+## Guardrails
+
+- Read-only. Never echo GLPI tokens.
+- To sync tickets into brain data instead, use `python tools/sync_glpi.py` (not this skill).

skills/glpi-solve/SKILL.md

@@ -0,0 +1,96 @@
+# Skill: glpi-solve — Close Out a GLPI Ticket
+
+> Properly close out a completed GLPI helpdesk ticket. Completing the work is not
+> enough — the ticket **status must be set to "Solved"**, which is what triggers
+> GLPI's config-driven auto-close. Posting a resolution followup documents the work
+> but does **not** change status, so a ticket left at Solved-less status stays open.
+
+## When to use
+
+- Any time work on a GLPI ticket is finished and it should be closed out.
+- After posting a root-cause / resolution writeup as an `/ITILFollowup`.
+- During a cleanup sweep of tickets that are done in reality but still open in GLPI.
+
+## The rule (from an operator, 2026-07-20)
+
+**"Solved" is the correct terminal state to set — not "Closed."** GLPI is configured
+to auto-close Solved tickets after its delay. If you only post a followup and never set
+status, the ticket sits open (this bit us on a real incident where resolution followups
+were posted but status was never advanced, leaving tickets open, which the operator had
+to mark Solved by hand).
+
+Close-out = **followup (optional but preferred) + set status to Solved.**
+
+## GLPI status IDs
+
+| ID    | Status                |                                              |
+| ----- | --------------------- | -------------------------------------------- |
+| 1     | New                   |                                              |
+| 2     | Processing (assigned) |                                              |
+| 3     | Processing (planned)  |                                              |
+| 4     | Pending / Waiting     |                                              |
+| **5** | **Solved**            | ← set this on close-out                      |
+| 6     | Closed                | ← happens automatically; do not set manually |
+
+## Procedure
+
+### 1. Get a session token
+
+```bash
+SESSION=$(~/.config/mosaic/tools/glpi/session-init.sh -q)
+source ~/.config/mosaic/tools/_lib/credentials.sh && load_credentials glpi
+```
+
+### 2. (Preferred) Post the resolution followup
+
+Use the **top-level `/ITILFollowup` endpoint** — the `/Ticket/<id>/ITILFollowup`
+sub-resource returns permission errors even as Super-Admin (known GLPI quirk).
+
+```bash
+TICKET_ID=<id>
+curl -sk -X POST "${GLPI_URL}/ITILFollowup" \
+  -H "App-Token: $GLPI_APP_TOKEN" \
+  -H "Session-Token: $SESSION" \
+  -H "Content-Type: application/json" \
+  -d "{\"input\":{\"itemtype\":\"Ticket\",\"items_id\":${TICKET_ID},\"content\":\"<resolution summary>\"}}"
+```
+
+### 3. Set status to Solved (the step that actually closes it out)
+
+```bash
+curl -sk -X PUT "${GLPI_URL}/Ticket/${TICKET_ID}" \
+  -H "App-Token: $GLPI_APP_TOKEN" \
+  -H "Session-Token: $SESSION" \
+  -H "Content-Type: application/json" \
+  -d "{\"input\":{\"id\":${TICKET_ID},\"status\":5}}"
+```
+
+Expect HTTP 200/201. GLPI will auto-close it later per its config — leave status at 5.
+
+### 4. Verify
+
+```bash
+curl -sk "${GLPI_URL}/Ticket/${TICKET_ID}?expand_dropdowns=true" \
+  -H "App-Token: $GLPI_APP_TOKEN" -H "Session-Token: $SESSION" \
+  | jq '{id, name, status}'
+```
+
+`status` should read `Solved` (or `5`).
+
+## Optional: sweep for done-but-open tickets
+
+List tickets still open (New/Processing/Pending) to spot ones whose work is actually
+finished but were never marked Solved:
+
+```bash
+~/.config/mosaic/tools/glpi/ticket-list.sh -s processing -f table
+~/.config/mosaic/tools/glpi/ticket-list.sh -s pending    -f table
+```
+
+Review each; for any that are genuinely resolved, run steps 2–3.
+
+## Guardrails
+
+- Read-only until you intend to close — confirm the ticket is actually done first.
+- Never echo the GLPI app/user/session tokens.
+- Set **Solved (5)**, never Closed (6) — auto-close owns that transition.

skills/glpi-sweep/SKILL.md

@@ -0,0 +1,62 @@
+# Skill: glpi-sweep — Find Done-But-Open Tickets
+
+> Read-only sweep for tickets that are finished in reality but still sitting open in
+> GLPI (never moved to Solved). Surfaces the exact miss an operator caught on 2026-07-20
+> (a real incident where an affected ticket had resolution followups posted but was left
+> open). For each one that's genuinely done, close it out with **[[glpi-solve]]**.
+
+## When to use
+
+- Periodic hygiene pass (e.g. before a weekly update or month-end).
+- After a burst of ticket work, to catch any you resolved-in-followup but never Solved.
+
+## Why this exists
+
+Posting an `/ITILFollowup` documents work but does **not** change status. Tickets only
+auto-close once set to **Solved (status 5)**. Anything left at New/Processing/Pending
+stays open indefinitely. This sweep finds those.
+
+## Procedure
+
+### 1. List still-open tickets by status
+
+```bash
+GLPI=~/.config/mosaic/tools/glpi
+"$GLPI/ticket-list.sh" -s new        -f table
+"$GLPI/ticket-list.sh" -s processing -f table
+"$GLPI/ticket-list.sh" -s pending    -f table
+```
+
+(GLPI status IDs: 1 New · 2/3 Processing · 4 Pending · 5 Solved · 6 Closed.)
+
+### 2. Triage
+
+For each open ticket, judge whether the underlying work is actually finished — check
+its latest followups and cross-reference brain tasks / recent work. Read-only here;
+change nothing yet.
+
+Reasonable "probably done" signals:
+
+- A resolution/root-cause followup already posted, but status never advanced.
+- The related brain task is `done`, or the fix shipped and was confirmed.
+- Requester confirmed resolution but the ticket was never Solved.
+
+### 3. Present the candidates
+
+List them for review before touching anything — never bulk-solve blindly:
+
+```
+Open tickets that look resolved:
+- #<id> "<title>" — <why it looks done> → glpi-solve?
+```
+
+### 4. Close out the confirmed ones
+
+For each ticket the user (or clear evidence) confirms is done, run **[[glpi-solve]]**
+(optionally **[[glpi-followup]]** first if a closing note is warranted).
+
+## Guardrails
+
+- Read-only until a ticket is confirmed done — do not auto-solve on a guess.
+- Never echo GLPI tokens.
+- Set **Solved (5)**, never Closed (6) — GLPI auto-close owns that transition.