288 lines
16 KiB
Markdown
288 lines
16 KiB
Markdown
# Host run sheet: preparing a host for the stack
|
|
|
|
ops-01 runs this on a fresh host before install (I2), and once per host for enrollment. Jason places the
|
|
credentials in section 9. Brief: `docs/plans/2026-10-20_installer-rows.md`, I3 (row 233, #1735). The
|
|
host design is Darkwing's r6 (`agents/darkwing/work/queue-195/DESIGN.md`, section 2) as the brief
|
|
changes it.
|
|
|
|
The hosts are .53 (profile `factory`) and .54 (profile `library`). Both get every section unless a
|
|
section says otherwise. Every command runs as root unless it starts with `sudo -u mosaic`.
|
|
|
|
Each item names the `scripts/case2-precheck.sh` line that verifies it. Install's precheck runs as the
|
|
stack's user with `--business ID --profile factory|library`. Where no precheck line checks an item, the
|
|
item says "precheck line missing", and Gosalyn adds the line to I2. Today's precheck (C2-13a) has these
|
|
gaps; C2-13b adds the library lines (`library.sync`, persona modes, no Discord binding).
|
|
|
|
## 1. The stack's user and its home
|
|
|
|
```sh
|
|
useradd --system --user-group --home-dir /srv/mosaic --create-home --shell /usr/sbin/nologin mosaic
|
|
chmod 0700 /srv/mosaic
|
|
install -d -o root -g root -m 0755 /etc/mosaic-stack
|
|
install -d -o root -g root -m 0750 /var/log/mosaic-stack
|
|
```
|
|
|
|
`mosaic` gets no sudo rule and no supplementary group. Check with `sudo -l -U mosaic` (expect "not allowed
|
|
to run sudo") and `id -G mosaic` (one number).
|
|
|
|
Precheck lines:
|
|
- `ok HOME is /srv/mosaic`
|
|
- `ok sudo -n true fails as mosaic`
|
|
- `ok id -G prints one group (<gid>)`
|
|
- `/srv/mosaic` at 0700: precheck line missing.
|
|
|
|
## 2. node, pinned under /opt
|
|
|
|
The pin is the version and sha256 the window names. `<v>` below is that version, for example `v24.x.y`.
|
|
|
|
```sh
|
|
install -d -o root -g root -m 0755 /etc/mosaic-stack/node-keys /opt/mosaic-stack
|
|
cd "$(mktemp -d)"
|
|
curl -fsSLO https://nodejs.org/dist/<v>/node-<v>-linux-x64.tar.xz
|
|
curl -fsSLO https://nodejs.org/dist/<v>/SHASUMS256.txt
|
|
curl -fsSLO https://nodejs.org/dist/<v>/SHASUMS256.txt.asc
|
|
gpg --no-default-keyring --keyring /etc/mosaic-stack/node-keys/pubring.kbx --verify SHASUMS256.txt.asc SHASUMS256.txt
|
|
grep " node-<v>-linux-x64.tar.xz\$" SHASUMS256.txt | sha256sum -c -
|
|
echo "<pinned sha256> node-<v>-linux-x64.tar.xz" | sha256sum -c -
|
|
tar -xJf node-<v>-linux-x64.tar.xz --no-same-owner
|
|
mv node-<v>-linux-x64 /opt/mosaic-stack/node-<v>
|
|
chown -R root:root /opt/mosaic-stack/node-<v>
|
|
chmod -R go-w /opt/mosaic-stack/node-<v>
|
|
```
|
|
|
|
The keyring holds the Node release keys from the nodejs/release-keys repository, nothing else. Stop on any
|
|
failed check; don't unpack. Rollback: `rm -r /opt/mosaic-stack/node-<v>`.
|
|
|
|
Precheck lines:
|
|
- `ok node <v>` (version 24 or later only).
|
|
- The `--node` path in the args file must be a root-owned regular file outside the home. `case2-unit.sh`
|
|
refuses otherwise at render, which is not a precheck line.
|
|
- The installed version equals the pin: precheck line missing.
|
|
|
|
## 3. claude, factory only (.53)
|
|
|
|
Root installs it under `/opt`, never under the stack's home (this replaces r6's `/srv/mosaic/.local/bin`).
|
|
The pin is 2.1.304 unless the window names a newer one.
|
|
|
|
```sh
|
|
install -d -o root -g root -m 0755 /opt/mosaic-stack/claude-<pin> /etc/claude-code
|
|
PATH=/opt/mosaic-stack/node-<v>/bin:/usr/sbin:/usr/bin:/sbin:/bin \
|
|
npm install --prefix /opt/mosaic-stack/claude-<pin> @anthropic-ai/claude-code@<pin>
|
|
chown -R root:root /opt/mosaic-stack/claude-<pin>
|
|
/opt/mosaic-stack/claude-<pin>/node_modules/@anthropic-ai/claude-code/bin/claude.exe --version
|
|
printf '%s\n' '{"env":{"DISABLE_AUTOUPDATER":"1"}}' > /etc/claude-code/managed-settings.json
|
|
chown root:root /etc/claude-code/managed-settings.json
|
|
chmod 0644 /etc/claude-code/managed-settings.json
|
|
```
|
|
|
|
Rollback: `rm -r /opt/mosaic-stack/claude-<pin> /etc/claude-code/managed-settings.json`.
|
|
|
|
Root's PATH has no npm, so the install line puts section 2's pinned node first; the package's postinstall
|
|
also runs `node`. The `--version` line must print `<pin> (Claude Code)`. Anything else means the postinstall
|
|
left its 500-byte stub in `bin/claude.exe` (no native package for the platform, or scripts were off): stop and
|
|
roll back.
|
|
|
|
The args file's `--claude` is
|
|
`/opt/mosaic-stack/claude-<pin>/node_modules/@anthropic-ai/claude-code/bin/claude.exe`, the regular file the
|
|
postinstall hardlinks or copies the native binary to. Not `node_modules/.bin/claude`: that is npm's symlink
|
|
to it, and `case2-unit.sh` refuses a symlink, as it does anything that isn't a root-owned regular file outside
|
|
the home. Checked against the 2.1.304 package's `install.cjs`; a newer pin needs the same check.
|
|
|
|
Precheck lines:
|
|
- `ok claude replaces its prompt with --system-prompt-file (<n> input tokens)`. It runs the claude the bus
|
|
unit's `MOSAIC_CLAUDE_BIN` names, so it needs the model credential from section 9.
|
|
- Managed settings present with the autoupdater off: precheck line missing.
|
|
|
|
## 4. bubblewrap, AppArmor and the drift stop
|
|
|
|
Both hosts. These are r6's items, unchanged.
|
|
|
|
```sh
|
|
apt-get install bubblewrap=0.9.0-1ubuntu0.3
|
|
stat -c '%U:%G %a' /usr/bin/bwrap > /etc/mosaic-stack/bwrap.orig # expect root:root 755
|
|
|
|
cd "$(mktemp -d)"
|
|
apt-get download apparmor-profiles=4.0.1really4.0.1-0ubuntu0.24.04.9
|
|
dpkg-deb --fsys-tarfile apparmor-profiles_*.deb | tar -x ./usr/share/apparmor/extra-profiles/bwrap-userns-restrict
|
|
echo "11d39094f044f0cda0febb3ad517b830301da6b2ce929664af09ee9e4dd264f9 usr/share/apparmor/extra-profiles/bwrap-userns-restrict" | sha256sum -c -
|
|
install -o root -g root -m 0644 usr/share/apparmor/extra-profiles/bwrap-userns-restrict /etc/apparmor.d/bwrap-userns-restrict
|
|
echo "11d39094f044f0cda0febb3ad517b830301da6b2ce929664af09ee9e4dd264f9 /etc/apparmor.d/bwrap-userns-restrict" | sha256sum -c -
|
|
apparmor_parser -r /etc/apparmor.d/bwrap-userns-restrict
|
|
|
|
dpkg-statoverride --update --add root mosaic 0750 /usr/bin/bwrap
|
|
```
|
|
|
|
Run as root in a `mktemp -d` dir, `apt-get download` prints a line starting `W: Download is performed
|
|
unsandboxed as root`, because the `_apt` user can't write that dir. The line is expected and the
|
|
download still succeeds. Each `sha256sum -c -` line must print `OK`. The second one checks the copy in
|
|
`/etc/apparmor.d`, the file that loads. Stop on any other result.
|
|
|
|
`aa-status` then lists `bwrap` and `unpriv_bwrap` in enforce mode. Install the one profile file, never the
|
|
whole `apparmor-profiles` package, whose 20 other profiles would load at the next boot. Rollback, in
|
|
reverse order: `dpkg-statoverride --remove /usr/bin/bwrap`, then `chown` and `chmod` to the values in
|
|
`bwrap.orig`; `apparmor_parser -R /etc/apparmor.d/bwrap-userns-restrict`, then `rm` it;
|
|
`apt-get remove bubblewrap`.
|
|
|
|
The no-new-privs test must print `bwrap//&unpriv_bwrap (enforce)`:
|
|
|
|
```sh
|
|
systemd-run --wait --pipe --uid=mosaic --gid=mosaic -p NoNewPrivileges=yes -p ProtectSystem=strict \
|
|
-p ProtectHome=yes -p PrivateTmp=yes \
|
|
/usr/bin/bwrap --unshare-user --unshare-pid --ro-bind / / cat /proc/self/attr/current
|
|
```
|
|
|
|
The P9 checks: another user's `/usr/bin/bwrap --version` fails with Permission denied, `getent group mosaic`
|
|
lists no member, and `sysctl fs.protected_hardlinks` prints 1. `sysctl
|
|
kernel.apparmor_restrict_unprivileged_userns` prints 1 too (Ubuntu 24.04's default); leave it, so nothing
|
|
else on the host gains user namespaces.
|
|
|
|
The drift stop (row 240, I4, #1746) goes in last, after the profile and the statoverride. As root, from
|
|
the root-owned checkout of the reviewed commit:
|
|
|
|
```sh
|
|
install -d -o root -g root -m 0755 /usr/local/lib/mosaic-stack
|
|
install -o root -g root -m 0755 scripts/case1-hostcheck.sh /usr/local/lib/mosaic-stack/hostcheck.sh
|
|
install -o root -g root -m 0644 scripts/case1-pins.sh /usr/local/lib/mosaic-stack/case1-pins.sh
|
|
printf '%s\n' 'DPkg::Post-Invoke { "/usr/local/lib/mosaic-stack/hostcheck.sh --enforce || true"; };' \
|
|
> /etc/apt/apt.conf.d/80mosaic-hostcheck
|
|
install -o root -g root -m 0644 packages/cli/systemd/mosaic-hostcheck.service /etc/systemd/system/
|
|
systemctl daemon-reload && systemctl enable mosaic-hostcheck.service
|
|
/usr/local/lib/mosaic-stack/hostcheck.sh --check
|
|
```
|
|
|
|
`--check` prints one `ok` line for each of its seven items and exits 0. Item 7 reads 1023 as the port
|
|
until I2 installs the Console unit (section 10), then the unit's `--port`. `stack-upgrade.sh` runs `--check`
|
|
before its plan and refuses `profile-drift` on any exit but 0, a missing file included. Rollback:
|
|
`systemctl disable mosaic-hostcheck.service`, then `rm` the unit, the hook file and
|
|
`/usr/local/lib/mosaic-stack`.
|
|
|
|
On drift, `--enforce` (the apt hook after every package run, and the unit at boot) unloads the profile,
|
|
closes `/usr/bin/bwrap` to `root:root` 0700, appends the failed items to `/etc/mosaic-stack/DRIFT` and logs
|
|
a line in `/var/log/mosaic-stack/hostcheck.log`. Every role session then refuses to start. ops-01 reads the
|
|
log in each STATE report and sends any `DRIFT` to Mos. Only root removes `DRIFT`, in a reviewed step with
|
|
a new pin or a Mos go. After that, `chown root:mosaic /usr/bin/bwrap`, `chmod 0750 /usr/bin/bwrap` and
|
|
`apparmor_parser -r /etc/apparmor.d/bwrap-userns-restrict` put bwrap back, and `--check` must exit 0.
|
|
|
|
Before each re-pin window, ops-01 runs `/usr/local/lib/mosaic-stack/hostcheck.sh --upstream`. It
|
|
downloads the `apparmor-profiles` candidate and compares its `bwrap-userns-restrict` to the pin. A
|
|
`DIFFERS` line goes to Mos as a new-pin request; it refuses nothing.
|
|
|
|
Precheck lines:
|
|
- `ok bwrap --unshare-all runs`
|
|
- The AppArmor profile, the statoverride, the no-new-privs result and the P9 checks: precheck line missing.
|
|
`/usr/local/lib/mosaic-stack/hostcheck.sh --check` covers them (row 240).
|
|
|
|
## 5. The port floor
|
|
|
|
Leave `net.ipv4.ip_unprivileged_port_start` at its default (1024) or higher. The Console's port is below
|
|
it and the unit gets `CAP_NET_BIND_SERVICE`, so no other `mosaic` process can bind that port.
|
|
|
|
Precheck line: `ok net.ipv4.ip_unprivileged_port_start <n> is above the Console's port <port>`.
|
|
|
|
## 6. The release transport
|
|
|
|
A release is a git bundle of `refs/heads/refactor` plus the 40-character commit id (I1, mos-1118 choice 2).
|
|
Mos's go names both, with the bundle's sha256. `<sha>` below is that id.
|
|
|
|
First install:
|
|
|
|
```sh
|
|
# Copy the bundle in, then check it before anything reads it.
|
|
echo "<bundle sha256> /root/<sha>.bundle" | sha256sum -c -
|
|
git bundle verify /root/<sha>.bundle
|
|
|
|
# Root's checkout. stack-upgrade.sh and case2-unit.sh run from here, never from a copy.
|
|
git clone -q -b refactor /root/<sha>.bundle /root/mosaic-stack
|
|
git -C /root/mosaic-stack checkout -q --detach <sha>
|
|
git -C /root/mosaic-stack rev-parse HEAD # must print <sha>
|
|
|
|
# The stack's user's copy of the bundle, and its own clone.
|
|
install -d -o mosaic -g mosaic -m 0700 /srv/mosaic/incoming /srv/mosaic/src
|
|
install -o mosaic -g mosaic -m 0600 /root/<sha>.bundle /srv/mosaic/incoming/<sha>.bundle
|
|
sudo -u mosaic -H git clone -q -b refactor /srv/mosaic/incoming/<sha>.bundle /srv/mosaic/src/mosaic-stack
|
|
```
|
|
|
|
Each upgrade, before `stack-upgrade.sh upgrade`:
|
|
|
|
```sh
|
|
echo "<bundle sha256> /root/<sha>.bundle" | sha256sum -c -
|
|
git bundle verify /root/<sha>.bundle
|
|
git -C /root/mosaic-stack fetch -q /root/<sha>.bundle refs/heads/refactor:refs/remotes/origin/refactor
|
|
git -C /root/mosaic-stack checkout -q --detach <sha>
|
|
install -o mosaic -g mosaic -m 0600 /root/<sha>.bundle /srv/mosaic/incoming/<sha>.bundle
|
|
/root/mosaic-stack/scripts/stack-upgrade.sh upgrade --instance dev --bundle /srv/mosaic/incoming/<sha>.bundle --sha <sha>
|
|
```
|
|
|
|
The driver fetches the bundle into the stack's user's clone and makes the copy itself. It refuses
|
|
`head-mismatch` when root's checkout isn't at `<sha>`. Usage, exits and the step log are in
|
|
`docs/TOOLS.md`, under "Root's upgrade driver". Each run needs Mos's go, and `--migrate` needs Jason present
|
|
(decision 96).
|
|
|
|
When a run doesn't exit 0, send Mos the exit and the last lines of `/var/log/mosaic-stack/upgrade-dev.log`:
|
|
- Exit 3: refused before anything stopped. The last line names the code. The stack's user's clone and the
|
|
new copy may already hold the new commit; the units still run the old one.
|
|
- Exit 1: the old copy runs and passed its gate. Either the driver restarted it after A2 or a refused A3
|
|
(A2f), or it rolled back after A3, A4 or A5.
|
|
- Exit 2: both units are stopped and the activation stays open, so the next run refuses at its plan until
|
|
it is finished with `confirm` or `revert`. One way here: a unit that doesn't stop within `--timeout`
|
|
keeps its old start time, A2f's gate fails it `stale-start`, and the driver stops both (duckworth-0055
|
|
N1). That is on purpose; a unit that won't stop is a reason to stop.
|
|
- Exit 5: `args-failed`. The new copy is live and passed confirm, but `/etc/mosaic-stack/dev.args` still names
|
|
the old copy. The next run refuses `args-differ`, and a render from that file would put the old copy back.
|
|
Move the file the result line names into place with `mv -f`. The two differ only in the `--copy` value.
|
|
|
|
Precheck lines: none. Root's checkout at `<sha>` and the stack's user's clone: precheck line missing.
|
|
After install, `stack-copy.sh check --units external` reads the copy the units run.
|
|
|
|
## 7. The args file
|
|
|
|
`/etc/mosaic-stack/dev.args` holds the `case2-unit.sh` arguments, one per line, with the serve flags after a
|
|
line holding `--`. I2's install writes it; ops-01 doesn't write it by hand. It must be root's, with no group
|
|
or other write (`chmod 0644` or tighter). Before `--` it takes only `--user`, `--home`, `--business`,
|
|
`--copy` (exactly once), `--node`, `--profile`, `--claude` and `--pm`. `stack-upgrade.sh` changes only the
|
|
`--copy` line, and only after confirm passes.
|
|
|
|
Precheck line: none. `stack-upgrade.sh` refuses `args-unreadable` on any of these rules.
|
|
|
|
## 8. Enrollment, once per host
|
|
|
|
The machine-grant enrollment is Gizmoduck's design r6, commit f9039682e, section 3, steps E1-E4. ops-01's
|
|
Q-O1 is answered (mos-1125). The host side is the `tools/host/` files: `mosaic-keys`, `mosaic-keys-write`,
|
|
their sudoers line and the sshd drop-in `/etc/ssh/sshd_config.d/<nn>-mosaic-keys.conf`. The verbs that run
|
|
it (`hosts.enroll`, the `host-enroll` decision) are rows 234 and 235, not yet on refactor. This item has no
|
|
commands until they land.
|
|
|
|
Precheck line: none. The enrolled host's key and its `mosaic-keys` sudoers line: precheck line missing.
|
|
|
|
## 9. Credential slots
|
|
|
|
Jason places these, all in one sitting per host. No value appears here or in any message. Check a placed
|
|
file with `stat -c '%U %a %n' PATH`, never `cat`. `<business>` is the host's business id.
|
|
|
|
### .53, factory
|
|
|
|
| Path | File | Mode | Owner | Profile | Precheck line |
|
|
|---|---|---|---|---|---|
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/` | `claude-session.env`, one line `CLAUDE_CODE_OAUTH_TOKEN=...` (Q185) | 0600 | mosaic | factory | `claude replaces its prompt with --system-prompt-file` runs claude with it. The file's mode and owner: precheck line missing. |
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/agents/<business>/<agent>/` | one file per service | 0600, dirs 0700 | mosaic | both | none. Filled only by `mosaic credentials issue`, or Approve after #436. Never by hand. |
|
|
|
|
### .54, library
|
|
|
|
| Path | File | Mode | Owner | Profile | Precheck line |
|
|
|---|---|---|---|---|---|
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/` | `claude-session.env`, one line `ZAI_API_KEY=...` | 0600 | mosaic | library | `<path> sets ZAI_API_KEY` |
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/` | the Console's proof file, the path the args file's `--proof-file` names | 0600 or 0400 | mosaic | library | none. `case2-unit.sh` refuses at render. Precheck line missing. |
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/<business>/` | `library-gitea` | 0600 | mosaic | library | C2-13b's `library.sync` (not landed) |
|
|
| `/srv/mosaic/.config/mosaic-dev/secrets/agents/<business>/<agent>/` | one file per service | 0600, dirs 0700 | mosaic | both | none. Filled only by `mosaic credentials issue`, or Approve after #436. Never by hand. |
|
|
|
|
The installer key, `<configDir>/secrets/hosts/<business>/<hostId>/installer`, is not a slot anyone places.
|
|
Enrollment (section 8) writes it under the enrolling stack's config directory and deletes it when the host
|
|
leaves.
|
|
|
|
## 10. Console start
|
|
|
|
None by hand. I2's `case2-unit.sh` enables both units, starts the bus, then the Console (Q189, mos-1122).
|
|
`stack-upgrade.sh` stops and starts both units itself.
|
|
|
|
Precheck line: none. Both units active after the render: precheck line missing.
|